linux-sg2042/arch/s390/kernel/compat_signal.c

530 lines
16 KiB
C
Raw Normal View History

/*
* Copyright IBM Corp. 2000, 2006
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
* Gerhard Tonn (ton@de.ibm.com)
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
*/
#include <linux/compat.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
#include <asm/switch_to.h>
#include "compat_linux.h"
#include "compat_ptrace.h"
#include "entry.h"
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE32];
struct sigcontext32 sc;
_sigregs32 sregs;
int signo;
_sigregs_ext32 sregs_ext;
__u16 svc_insn; /* Offset of svc_insn is NOT fixed! */
} sigframe32;
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE32];
__u16 svc_insn;
compat_siginfo_t info;
struct ucontext32 uc;
} rt_sigframe32;
int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
{
int err;
/* If you change siginfo_t structure, please be sure
this code is fixed accordingly.
It should never copy any pad contained in the structure
to avoid security leaks, but must copy the generic
3 ints plus the relevant union member.
This routine must convert siginfo from 64bit to 32bit as well
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
err |= __put_user((short)from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
switch (from->si_code >> 16) {
case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
case __SI_MESGQ >> 16:
err |= __put_user(from->si_int, &to->si_int);
/* fallthrough */
case __SI_KILL >> 16:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
case __SI_CHLD >> 16:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
break;
case __SI_FAULT >> 16:
err |= __put_user((unsigned long) from->si_addr,
&to->si_addr);
break;
case __SI_POLL >> 16:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
case __SI_TIMER >> 16:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
default:
break;
}
}
return err ? -EFAULT : 0;
}
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
int err;
u32 tmp;
err = __get_user(to->si_signo, &from->si_signo);
err |= __get_user(to->si_errno, &from->si_errno);
err |= __get_user(to->si_code, &from->si_code);
if (to->si_code < 0)
err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
switch (to->si_code >> 16) {
case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
case __SI_MESGQ >> 16:
err |= __get_user(to->si_int, &from->si_int);
/* fallthrough */
case __SI_KILL >> 16:
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
break;
case __SI_CHLD >> 16:
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
err |= __get_user(to->si_utime, &from->si_utime);
err |= __get_user(to->si_stime, &from->si_stime);
err |= __get_user(to->si_status, &from->si_status);
break;
case __SI_FAULT >> 16:
err |= __get_user(tmp, &from->si_addr);
to->si_addr = (void __force __user *)
(u64) (tmp & PSW32_ADDR_INSN);
break;
case __SI_POLL >> 16:
err |= __get_user(to->si_band, &from->si_band);
err |= __get_user(to->si_fd, &from->si_fd);
break;
case __SI_TIMER >> 16:
err |= __get_user(to->si_tid, &from->si_tid);
err |= __get_user(to->si_overrun, &from->si_overrun);
err |= __get_user(to->si_int, &from->si_int);
break;
default:
break;
}
}
return err ? -EFAULT : 0;
}
/* Store registers needed to create the signal frame */
static void store_sigregs(void)
{
save_access_regs(current->thread.acrs);
save_fpu_regs(&current->thread.fpu);
}
/* Load registers after signal return */
static void load_sigregs(void)
{
restore_access_regs(current->thread.acrs);
}
static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs)
{
_sigregs32 user_sregs;
int i;
user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32);
user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI;
user_sregs.regs.psw.mask |= PSW32_USER_BITS;
user_sregs.regs.psw.addr = (__u32) regs->psw.addr |
(__u32)(regs->psw.mask & PSW_MASK_BA);
for (i = 0; i < NUM_GPRS; i++)
user_sregs.regs.gprs[i] = (__u32) regs->gprs[i];
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
sizeof(user_sregs.regs.acrs));
fpregs_store((_s390_fp_regs *) &user_sregs.fpregs, &current->thread.fpu);
if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32)))
return -EFAULT;
return 0;
}
static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
{
_sigregs32 user_sregs;
int i;
/* Alwys make any pending restarted system call return -EINTR */
all arches, signal: move restart_block to struct task_struct If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 07:01:14 +08:00
current->restart_block.fn = do_no_restart_syscall;
if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs)))
return -EFAULT;
if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI))
return -EINVAL;
/* Test the floating-point-control word. */
if (test_fp_ctl(user_sregs.fpregs.fpc))
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
/* Check for invalid user address space control. */
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
regs->psw.mask = PSW_ASC_PRIMARY |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN);
for (i = 0; i < NUM_GPRS; i++)
regs->gprs[i] = (__u64) user_sregs.regs.gprs[i];
memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
sizeof(current->thread.acrs));
fpregs_load((_s390_fp_regs *) &user_sregs.fpregs, &current->thread.fpu);
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
return 0;
}
static int save_sigregs_ext32(struct pt_regs *regs,
_sigregs_ext32 __user *sregs_ext)
{
__u32 gprs_high[NUM_GPRS];
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Save high gprs to signal stack */
for (i = 0; i < NUM_GPRS; i++)
gprs_high[i] = regs->gprs[i] >> 32;
if (__copy_to_user(&sregs_ext->gprs_high, &gprs_high,
sizeof(sregs_ext->gprs_high)))
return -EFAULT;
/* Save vector registers to signal stack */
if (is_vx_task(current)) {
for (i = 0; i < __NUM_VXRS_LOW; i++)
vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1);
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
sizeof(sregs_ext->vxrs_low)) ||
__copy_to_user(&sregs_ext->vxrs_high,
current->thread.fpu.vxrs + __NUM_VXRS_LOW,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
}
return 0;
}
static int restore_sigregs_ext32(struct pt_regs *regs,
_sigregs_ext32 __user *sregs_ext)
{
__u32 gprs_high[NUM_GPRS];
__u64 vxrs[__NUM_VXRS_LOW];
int i;
/* Restore high gprs from signal stack */
if (__copy_from_user(&gprs_high, &sregs_ext->gprs_high,
sizeof(&sregs_ext->gprs_high)))
return -EFAULT;
for (i = 0; i < NUM_GPRS; i++)
*(__u32 *)&regs->gprs[i] = gprs_high[i];
/* Restore vector registers from signal stack */
if (is_vx_task(current)) {
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
__copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
&sregs_ext->vxrs_high,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
for (i = 0; i < __NUM_VXRS_LOW; i++)
*((__u64 *)(current->thread.fpu.vxrs + i) + 1) = vxrs[i];
}
return 0;
}
COMPAT_SYSCALL_DEFINE0(sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
sigframe32 __user *frame = (sigframe32 __user *)regs->gprs[15];
sigset_t set;
if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE32))
goto badframe;
set_current_blocked(&set);
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 18:53:42 +08:00
save_fpu_regs(&current->thread.fpu);
if (restore_sigregs32(regs, &frame->sregs))
goto badframe;
if (restore_sigregs_ext32(regs, &frame->sregs_ext))
goto badframe;
load_sigregs();
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
rt_sigframe32 __user *frame = (rt_sigframe32 __user *)regs->gprs[15];
sigset_t set;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
set_current_blocked(&set);
if (compat_restore_altstack(&frame->uc.uc_stack))
goto badframe;
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 18:53:42 +08:00
save_fpu_regs(&current->thread.fpu);
if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
goto badframe;
if (restore_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
goto badframe;
load_sigregs();
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/*
* Set up a signal frame.
*/
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
/* Default to using normal stack */
sp = (unsigned long) A(regs->gprs[15]);
/* Overflow on alternate signal stack gives SIGSEGV. */
if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
return (void __user *) -1UL;
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
}
return (void __user *)((sp - frame_size) & -8ul);
}
static int setup_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
int sig = ksig->sig;
sigframe32 __user *frame;
struct sigcontext32 sc;
unsigned long restorer;
size_t frame_size;
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
frame_size = sizeof(*frame) - sizeof(frame->sregs_ext.__reserved);
if (!MACHINE_HAS_VX)
frame_size -= sizeof(frame->sregs_ext.vxrs_low) +
sizeof(frame->sregs_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __user *) frame))
return -EFAULT;
/* Create struct sigcontext32 on the signal stack */
memcpy(&sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE32);
sc.sregs = (__u32)(unsigned long __force) &frame->sregs;
if (__copy_to_user(&frame->sc, &sc, sizeof(frame->sc)))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create _sigregs32 on the signal stack */
if (save_sigregs32(regs, &frame->sregs))
return -EFAULT;
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo))
return -EFAULT;
/* Create _sigregs_ext32 on the signal stack */
if (save_sigregs_ext32(regs, &frame->sregs_ext))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
/* Signal frames without vectors registers are short ! */
__u16 __user *svc = (void __user *) frame + frame_size - 2;
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
}
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (__force __u64) frame;
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__force __u64) ksig->ka.sa.sa_handler;
regs->gprs[2] = sig;
regs->gprs[3] = (__force __u64) &frame->sc;
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP || sig == SIGFPE) {
/* set extra registers only for synchronous signals */
regs->gprs[4] = regs->int_code & 127;
regs->gprs[5] = regs->int_parm_long;
regs->gprs[6] = task_thread_info(current)->last_break;
}
return 0;
}
static int setup_rt_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
rt_sigframe32 __user *frame;
unsigned long restorer;
size_t frame_size;
u32 uc_flags;
frame_size = sizeof(*frame) -
sizeof(frame->uc.uc_mcontext_ext.__reserved);
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
uc_flags = UC_GPRS_HIGH;
if (MACHINE_HAS_VX) {
if (is_vx_task(current))
uc_flags |= UC_VXRS;
} else
frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) +
sizeof(frame->uc.uc_mcontext_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
if (frame == (void __user *) -1UL)
return -EFAULT;
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __force __user *) frame))
return -EFAULT;
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
__u16 __user *svc = &frame->svc_insn;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
return -EFAULT;
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
}
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user32(&frame->info, &ksig->info))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create ucontext on the signal stack. */
if (__put_user(uc_flags, &frame->uc.uc_flags) ||
__put_user(0, &frame->uc.uc_link) ||
__compat_save_altstack(&frame->uc.uc_stack, regs->gprs[15]) ||
save_sigregs32(regs, &frame->uc.uc_mcontext) ||
__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)) ||
save_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
return -EFAULT;
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
regs->gprs[15] = (__force __u64) frame;
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
(PSW_USER_BITS & PSW_MASK_ASC) |
(regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64 __force) ksig->ka.sa.sa_handler;
regs->gprs[2] = ksig->sig;
regs->gprs[3] = (__force __u64) &frame->info;
regs->gprs[4] = (__force __u64) &frame->uc;
regs->gprs[5] = task_thread_info(current)->last_break;
return 0;
}
/*
* OK, we're invoking a handler
*/
void handle_signal32(struct ksignal *ksig, sigset_t *oldset,
struct pt_regs *regs)
{
int ret;
/* Set up the stack frame */
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame32(ksig, oldset, regs);
else
ret = setup_frame32(ksig, oldset, regs);
signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLE_STEP));
}