linux-sg2042/arch/s390/kernel/smp.c

1239 lines
32 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* SMP related functions
*
* Copyright IBM Corp. 1999, 2012
* Author(s): Denis Joseph Barrow,
* Martin Schwidefsky <schwidefsky@de.ibm.com>,
* Heiko Carstens <heiko.carstens@de.ibm.com>,
*
* based on other smp stuff by
* (c) 1995 Alan Cox, CymruNET Ltd <alan@cymru.net>
* (c) 1998 Ingo Molnar
*
* The code outside of smp.c uses logical cpu numbers, only smp.c does
* the translation of logical to physical cpu ids. All new code that
* operates on physical cpu numbers needs to go into smp.c.
*/
#define KMSG_COMPONENT "cpu"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/workqueue.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/memblock.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/mm.h>
Remove fs.h from mm.h Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 06:36:13 +08:00
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irqflags.h>
#include <linux/cpu.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sched/hotplug.h>
#include <linux/sched/task_stack.h>
#include <linux/crash_dump.h>
#include <linux/kprobes.h>
#include <asm/asm-offsets.h>
#include <asm/diag.h>
#include <asm/switch_to.h>
#include <asm/facility.h>
#include <asm/ipl.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/tlbflush.h>
#include <asm/vtimer.h>
#include <asm/lowcore.h>
#include <asm/sclp.h>
#include <asm/vdso.h>
#include <asm/debug.h>
#include <asm/os_info.h>
#include <asm/sigp.h>
#include <asm/idle.h>
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26 21:10:34 +08:00
#include <asm/nmi.h>
#include <asm/stacktrace.h>
#include <asm/topology.h>
#include "entry.h"
enum {
ec_schedule = 0,
ec_call_function_single,
ec_stop_cpu,
ec_mcck_pending,
};
enum {
CPU_STATE_STANDBY,
CPU_STATE_CONFIGURED,
};
static DEFINE_PER_CPU(struct cpu *, cpu_device);
struct pcpu {
struct lowcore *lowcore; /* lowcore page(s) for the cpu */
unsigned long ec_mask; /* bit mask for ec_xxx functions */
unsigned long ec_clk; /* sigp timestamp for ec_xxx */
signed char state; /* physical cpu state */
signed char polarization; /* physical polarization */
u16 address; /* physical cpu address */
};
static u8 boot_core_type;
static struct pcpu pcpu_devices[NR_CPUS];
unsigned int smp_cpu_mt_shift;
EXPORT_SYMBOL(smp_cpu_mt_shift);
unsigned int smp_cpu_mtid;
EXPORT_SYMBOL(smp_cpu_mtid);
#ifdef CONFIG_CRASH_DUMP
__vector128 __initdata boot_cpu_vector_save_area[__NUM_VXRS];
#endif
static unsigned int smp_max_threads __initdata = -1U;
static int __init early_nosmt(char *s)
{
smp_max_threads = 1;
return 0;
}
early_param("nosmt", early_nosmt);
static int __init early_smt(char *s)
{
get_option(&s, &smp_max_threads);
return 0;
}
early_param("smt", early_smt);
/*
* The smp_cpu_state_mutex must be held when changing the state or polarization
* member of a pcpu data structure within the pcpu_devices arreay.
*/
DEFINE_MUTEX(smp_cpu_state_mutex);
/*
* Signal processor helper functions.
*/
static inline int __pcpu_sigp_relax(u16 addr, u8 order, unsigned long parm)
{
int cc;
while (1) {
cc = __pcpu_sigp(addr, order, parm, NULL);
if (cc != SIGP_CC_BUSY)
return cc;
cpu_relax();
}
}
static int pcpu_sigp_retry(struct pcpu *pcpu, u8 order, u32 parm)
{
int cc, retry;
for (retry = 0; ; retry++) {
cc = __pcpu_sigp(pcpu->address, order, parm, NULL);
if (cc != SIGP_CC_BUSY)
break;
if (retry >= 3)
udelay(10);
}
return cc;
}
static inline int pcpu_stopped(struct pcpu *pcpu)
{
u32 uninitialized_var(status);
if (__pcpu_sigp(pcpu->address, SIGP_SENSE,
0, &status) != SIGP_CC_STATUS_STORED)
return 0;
return !!(status & (SIGP_STATUS_CHECK_STOP|SIGP_STATUS_STOPPED));
}
static inline int pcpu_running(struct pcpu *pcpu)
{
if (__pcpu_sigp(pcpu->address, SIGP_SENSE_RUNNING,
0, NULL) != SIGP_CC_STATUS_STORED)
return 1;
/* Status stored condition code is equivalent to cpu not running. */
return 0;
}
/*
* Find struct pcpu by cpu address.
*/
static struct pcpu *pcpu_find_address(const struct cpumask *mask, u16 address)
{
int cpu;
for_each_cpu(cpu, mask)
if (pcpu_devices[cpu].address == address)
return pcpu_devices + cpu;
return NULL;
}
static void pcpu_ec_call(struct pcpu *pcpu, int ec_bit)
{
int order;
if (test_and_set_bit(ec_bit, &pcpu->ec_mask))
return;
order = pcpu_running(pcpu) ? SIGP_EXTERNAL_CALL : SIGP_EMERGENCY_SIGNAL;
pcpu->ec_clk = get_tod_clock_fast();
pcpu_sigp_retry(pcpu, order, 0);
}
2013-06-19 05:04:52 +08:00
static int pcpu_alloc_lowcore(struct pcpu *pcpu, int cpu)
{
unsigned long async_stack, nodat_stack;
struct lowcore *lc;
if (pcpu != &pcpu_devices[0]) {
pcpu->lowcore = (struct lowcore *)
__get_free_pages(GFP_KERNEL | GFP_DMA, LC_ORDER);
nodat_stack = __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
if (!pcpu->lowcore || !nodat_stack)
goto out;
} else {
nodat_stack = pcpu->lowcore->nodat_stack - STACK_INIT_OFFSET;
}
async_stack = stack_alloc();
if (!async_stack)
goto out;
lc = pcpu->lowcore;
memcpy(lc, &S390_lowcore, 512);
memset((char *) lc + 512, 0, sizeof(*lc) - 512);
lc->async_stack = async_stack + STACK_INIT_OFFSET;
lc->nodat_stack = nodat_stack + STACK_INIT_OFFSET;
lc->cpu_nr = cpu;
lc->spinlock_lockval = arch_spin_lockval(cpu);
s390/spinlock: introduce spinlock wait queueing The queued spinlock code for s390 follows the principles of the common code qspinlock implementation but with a few notable differences. The format of the spinlock_t locking word differs, s390 needs to store the logical CPU number of the lock holder in the spinlock_t to be able to use the diagnose 9c directed yield hypervisor call. The inline code sequences for spin_lock and spin_unlock are nice and short. The inline portion of a spin_lock now typically looks like this: lhi %r0,0 # 0 indicates an empty lock l %r1,0x3a0 # CPU number + 1 from lowcore cs %r0,%r1,<some_lock> # lock operation jnz call_wait # on failure call wait function locked: ... call_wait: la %r2,<some_lock> brasl %r14,arch_spin_lock_wait j locked A spin_unlock is as simple as before: lhi %r0,0 sth %r0,2(%r2) # unlock operation After a CPU has queued itself it may not enable interrupts again for the arch_spin_lock_flags() variant. The arch_spin_lock_wait_flags wait function is removed. To improve performance the code implements opportunistic lock stealing. If the wait function finds a spinlock_t that indicates that the lock is free but there are queued waiters, the CPU may steal the lock up to three times without queueing itself. The lock stealing update the steal counter in the lock word to prevent more than 3 steals. The counter is reset at the time the CPU next in the queue successfully takes the lock. While the queued spinlocks improve performance in a system with dedicated CPUs, in a virtualized environment with continuously overcommitted CPUs the queued spinlocks can have a negative effect on performance. This is due to the fact that a queued CPU that is preempted by the hypervisor will block the queue at some point even without holding the lock. With the classic spinlock it does not matter if a CPU is preempted that waits for the lock. Therefore use the queued spinlock code only if the system runs with dedicated CPUs and fall back to classic spinlocks when running with shared CPUs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-25 00:25:02 +08:00
lc->spinlock_index = 0;
lc->br_r1_trampoline = 0x07f1; /* br %r1 */
lc->return_lpswe = gen_lpswe(__LC_RETURN_PSW);
lc->return_mcck_lpswe = gen_lpswe(__LC_RETURN_MCCK_PSW);
if (nmi_alloc_per_cpu(lc))
goto out_async;
if (vdso_alloc_per_cpu(lc))
goto out_mcesa;
lowcore_ptr[cpu] = lc;
pcpu_sigp_retry(pcpu, SIGP_SET_PREFIX, (u32)(unsigned long) lc);
return 0;
out_mcesa:
nmi_free_per_cpu(lc);
out_async:
stack_free(async_stack);
out:
if (pcpu != &pcpu_devices[0]) {
free_pages(nodat_stack, THREAD_SIZE_ORDER);
free_pages((unsigned long) pcpu->lowcore, LC_ORDER);
}
return -ENOMEM;
}
static void pcpu_free_lowcore(struct pcpu *pcpu)
{
unsigned long async_stack, nodat_stack, lowcore;
nodat_stack = pcpu->lowcore->nodat_stack - STACK_INIT_OFFSET;
async_stack = pcpu->lowcore->async_stack - STACK_INIT_OFFSET;
lowcore = (unsigned long) pcpu->lowcore;
pcpu_sigp_retry(pcpu, SIGP_SET_PREFIX, 0);
lowcore_ptr[pcpu - pcpu_devices] = NULL;
vdso_free_per_cpu(pcpu->lowcore);
nmi_free_per_cpu(pcpu->lowcore);
stack_free(async_stack);
if (pcpu == &pcpu_devices[0])
return;
free_pages(nodat_stack, THREAD_SIZE_ORDER);
free_pages(lowcore, LC_ORDER);
}
static void pcpu_prepare_secondary(struct pcpu *pcpu, int cpu)
{
struct lowcore *lc = pcpu->lowcore;
cpumask_set_cpu(cpu, &init_mm.context.cpu_attach_mask);
cpumask_set_cpu(cpu, mm_cpumask(&init_mm));
lc->cpu_nr = cpu;
lc->spinlock_lockval = arch_spin_lockval(cpu);
s390/spinlock: introduce spinlock wait queueing The queued spinlock code for s390 follows the principles of the common code qspinlock implementation but with a few notable differences. The format of the spinlock_t locking word differs, s390 needs to store the logical CPU number of the lock holder in the spinlock_t to be able to use the diagnose 9c directed yield hypervisor call. The inline code sequences for spin_lock and spin_unlock are nice and short. The inline portion of a spin_lock now typically looks like this: lhi %r0,0 # 0 indicates an empty lock l %r1,0x3a0 # CPU number + 1 from lowcore cs %r0,%r1,<some_lock> # lock operation jnz call_wait # on failure call wait function locked: ... call_wait: la %r2,<some_lock> brasl %r14,arch_spin_lock_wait j locked A spin_unlock is as simple as before: lhi %r0,0 sth %r0,2(%r2) # unlock operation After a CPU has queued itself it may not enable interrupts again for the arch_spin_lock_flags() variant. The arch_spin_lock_wait_flags wait function is removed. To improve performance the code implements opportunistic lock stealing. If the wait function finds a spinlock_t that indicates that the lock is free but there are queued waiters, the CPU may steal the lock up to three times without queueing itself. The lock stealing update the steal counter in the lock word to prevent more than 3 steals. The counter is reset at the time the CPU next in the queue successfully takes the lock. While the queued spinlocks improve performance in a system with dedicated CPUs, in a virtualized environment with continuously overcommitted CPUs the queued spinlocks can have a negative effect on performance. This is due to the fact that a queued CPU that is preempted by the hypervisor will block the queue at some point even without holding the lock. With the classic spinlock it does not matter if a CPU is preempted that waits for the lock. Therefore use the queued spinlock code only if the system runs with dedicated CPUs and fall back to classic spinlocks when running with shared CPUs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-25 00:25:02 +08:00
lc->spinlock_index = 0;
lc->percpu_offset = __per_cpu_offset[cpu];
lc->kernel_asce = S390_lowcore.kernel_asce;
s390/smp,vdso: fix ASCE handling When a secondary CPU is brought up it must initialize its control registers. CPU A which triggers that a secondary CPU B is brought up stores its control register contents into the lowcore of new CPU B, which then loads these values on startup. This is problematic in various ways: the control register which contains the home space ASCE will correctly contain the kernel ASCE; however control registers for primary and secondary ASCEs are initialized with whatever values were present in CPU A. Typically: - the primary ASCE will contain the user process ASCE of the process that triggered onlining of CPU B. - the secondary ASCE will contain the percpu VDSO ASCE of CPU A. Due to lazy ASCE handling we may also end up with other combinations. When then CPU B switches to a different process (!= idle) it will fixup the primary ASCE. However the problem is that the (wrong) ASCE from CPU A was loaded into control register 1: as soon as an ASCE is attached (aka loaded) a CPU is free to generate TLB entries using that address space. Even though it is very unlikey that CPU B will actually generate such entries, this could result in TLB entries of the address space of the process that ran on CPU A. These entries shouldn't exist at all and could cause problems later on. Furthermore the secondary ASCE of CPU B will not be updated correctly. This means that processes may see wrong results or even crash if they access VDSO data on CPU B. The correct VDSO ASCE will eventually be loaded on return to user space as soon as the kernel executed a call to strnlen_user or an atomic futex operation on CPU B. Fix both issues by intializing the to be loaded control register contents with the correct ASCEs and also enforce (re-)loading of the ASCEs upon first context switch and return to user space. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-18 20:09:52 +08:00
lc->user_asce = S390_lowcore.kernel_asce;
lc->machine_flags = S390_lowcore.machine_flags;
lc->user_timer = lc->system_timer =
lc->steal_timer = lc->avg_steal_timer = 0;
__ctl_store(lc->cregs_save_area, 0, 15);
s390/smp,vdso: fix ASCE handling When a secondary CPU is brought up it must initialize its control registers. CPU A which triggers that a secondary CPU B is brought up stores its control register contents into the lowcore of new CPU B, which then loads these values on startup. This is problematic in various ways: the control register which contains the home space ASCE will correctly contain the kernel ASCE; however control registers for primary and secondary ASCEs are initialized with whatever values were present in CPU A. Typically: - the primary ASCE will contain the user process ASCE of the process that triggered onlining of CPU B. - the secondary ASCE will contain the percpu VDSO ASCE of CPU A. Due to lazy ASCE handling we may also end up with other combinations. When then CPU B switches to a different process (!= idle) it will fixup the primary ASCE. However the problem is that the (wrong) ASCE from CPU A was loaded into control register 1: as soon as an ASCE is attached (aka loaded) a CPU is free to generate TLB entries using that address space. Even though it is very unlikey that CPU B will actually generate such entries, this could result in TLB entries of the address space of the process that ran on CPU A. These entries shouldn't exist at all and could cause problems later on. Furthermore the secondary ASCE of CPU B will not be updated correctly. This means that processes may see wrong results or even crash if they access VDSO data on CPU B. The correct VDSO ASCE will eventually be loaded on return to user space as soon as the kernel executed a call to strnlen_user or an atomic futex operation on CPU B. Fix both issues by intializing the to be loaded control register contents with the correct ASCEs and also enforce (re-)loading of the ASCEs upon first context switch and return to user space. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-18 20:09:52 +08:00
lc->cregs_save_area[1] = lc->kernel_asce;
lc->cregs_save_area[7] = lc->vdso_asce;
save_access_regs((unsigned int *) lc->access_regs_save_area);
memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list,
sizeof(lc->stfle_fac_list));
memcpy(lc->alt_stfle_fac_list, S390_lowcore.alt_stfle_fac_list,
sizeof(lc->alt_stfle_fac_list));
s390/spinlock: introduce spinlock wait queueing The queued spinlock code for s390 follows the principles of the common code qspinlock implementation but with a few notable differences. The format of the spinlock_t locking word differs, s390 needs to store the logical CPU number of the lock holder in the spinlock_t to be able to use the diagnose 9c directed yield hypervisor call. The inline code sequences for spin_lock and spin_unlock are nice and short. The inline portion of a spin_lock now typically looks like this: lhi %r0,0 # 0 indicates an empty lock l %r1,0x3a0 # CPU number + 1 from lowcore cs %r0,%r1,<some_lock> # lock operation jnz call_wait # on failure call wait function locked: ... call_wait: la %r2,<some_lock> brasl %r14,arch_spin_lock_wait j locked A spin_unlock is as simple as before: lhi %r0,0 sth %r0,2(%r2) # unlock operation After a CPU has queued itself it may not enable interrupts again for the arch_spin_lock_flags() variant. The arch_spin_lock_wait_flags wait function is removed. To improve performance the code implements opportunistic lock stealing. If the wait function finds a spinlock_t that indicates that the lock is free but there are queued waiters, the CPU may steal the lock up to three times without queueing itself. The lock stealing update the steal counter in the lock word to prevent more than 3 steals. The counter is reset at the time the CPU next in the queue successfully takes the lock. While the queued spinlocks improve performance in a system with dedicated CPUs, in a virtualized environment with continuously overcommitted CPUs the queued spinlocks can have a negative effect on performance. This is due to the fact that a queued CPU that is preempted by the hypervisor will block the queue at some point even without holding the lock. With the classic spinlock it does not matter if a CPU is preempted that waits for the lock. Therefore use the queued spinlock code only if the system runs with dedicated CPUs and fall back to classic spinlocks when running with shared CPUs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-25 00:25:02 +08:00
arch_spin_lock_setup(cpu);
}
static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk)
{
struct lowcore *lc = pcpu->lowcore;
lc->kernel_stack = (unsigned long) task_stack_page(tsk)
+ THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
lc->current_task = (unsigned long) tsk;
lc->lpp = LPP_MAGIC;
lc->current_pid = tsk->pid;
lc->user_timer = tsk->thread.user_timer;
lc->guest_timer = tsk->thread.guest_timer;
lc->system_timer = tsk->thread.system_timer;
lc->hardirq_timer = tsk->thread.hardirq_timer;
lc->softirq_timer = tsk->thread.softirq_timer;
lc->steal_timer = 0;
}
static void pcpu_start_fn(struct pcpu *pcpu, void (*func)(void *), void *data)
{
struct lowcore *lc = pcpu->lowcore;
lc->restart_stack = lc->nodat_stack;
lc->restart_fn = (unsigned long) func;
lc->restart_data = (unsigned long) data;
lc->restart_source = -1UL;
pcpu_sigp_retry(pcpu, SIGP_RESTART, 0);
}
/*
* Call function via PSW restart on pcpu and stop the current cpu.
*/
static void __pcpu_delegate(void (*func)(void*), void *data)
{
func(data); /* should not return */
}
static void __no_sanitize_address pcpu_delegate(struct pcpu *pcpu,
void (*func)(void *),
void *data, unsigned long stack)
{
struct lowcore *lc = lowcore_ptr[pcpu - pcpu_devices];
unsigned long source_cpu = stap();
__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
if (pcpu->address == source_cpu)
CALL_ON_STACK(__pcpu_delegate, stack, 2, func, data);
/* Stop target cpu (if func returns this stops the current cpu). */
pcpu_sigp_retry(pcpu, SIGP_STOP, 0);
/* Restart func on the target cpu and stop the current cpu. */
mem_assign_absolute(lc->restart_stack, stack);
mem_assign_absolute(lc->restart_fn, (unsigned long) func);
mem_assign_absolute(lc->restart_data, (unsigned long) data);
mem_assign_absolute(lc->restart_source, source_cpu);
__bpon();
asm volatile(
"0: sigp 0,%0,%2 # sigp restart to target cpu\n"
" brc 2,0b # busy, try again\n"
"1: sigp 0,%1,%3 # sigp stop to current cpu\n"
" brc 2,1b # busy, try again\n"
: : "d" (pcpu->address), "d" (source_cpu),
"K" (SIGP_RESTART), "K" (SIGP_STOP)
: "0", "1", "cc");
for (;;) ;
}
/*
* Enable additional logical cpus for multi-threading.
*/
static int pcpu_set_smt(unsigned int mtid)
{
int cc;
if (smp_cpu_mtid == mtid)
return 0;
cc = __pcpu_sigp(0, SIGP_SET_MULTI_THREADING, mtid, NULL);
if (cc == 0) {
smp_cpu_mtid = mtid;
smp_cpu_mt_shift = 0;
while (smp_cpu_mtid >= (1U << smp_cpu_mt_shift))
smp_cpu_mt_shift++;
pcpu_devices[0].address = stap();
}
return cc;
}
/*
* Call function on an online CPU.
*/
void smp_call_online_cpu(void (*func)(void *), void *data)
{
struct pcpu *pcpu;
/* Use the current cpu if it is online. */
pcpu = pcpu_find_address(cpu_online_mask, stap());
if (!pcpu)
/* Use the first online cpu. */
pcpu = pcpu_devices + cpumask_first(cpu_online_mask);
pcpu_delegate(pcpu, func, data, (unsigned long) restart_stack);
}
/*
* Call function on the ipl CPU.
*/
void smp_call_ipl_cpu(void (*func)(void *), void *data)
{
s390/smp: Fix calling smp_call_ipl_cpu() from ipl CPU When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0dad81 ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-11 22:18:22 +08:00
struct lowcore *lc = pcpu_devices->lowcore;
if (pcpu_devices[0].address == stap())
lc = &S390_lowcore;
pcpu_delegate(&pcpu_devices[0], func, data,
s390/smp: Fix calling smp_call_ipl_cpu() from ipl CPU When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0dad81 ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-11 22:18:22 +08:00
lc->nodat_stack);
}
int smp_find_processor_id(u16 address)
{
int cpu;
for_each_present_cpu(cpu)
if (pcpu_devices[cpu].address == address)
return cpu;
return -1;
}
void schedule_mcck_handler(void)
{
pcpu_ec_call(pcpu_devices + smp_processor_id(), ec_mcck_pending);
}
bool notrace arch_vcpu_is_preempted(int cpu)
{
if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
return false;
if (pcpu_running(pcpu_devices + cpu))
return false;
return true;
}
EXPORT_SYMBOL(arch_vcpu_is_preempted);
void notrace smp_yield_cpu(int cpu)
{
if (!MACHINE_HAS_DIAG9C)
return;
diag_stat_inc_norecursion(DIAG_STAT_X09C);
asm volatile("diag %0,0,0x9c"
: : "d" (pcpu_devices[cpu].address));
}
/*
* Send cpus emergency shutdown signal. This gives the cpus the
* opportunity to complete outstanding interrupts.
*/
void notrace smp_emergency_stop(void)
{
cpumask_t cpumask;
u64 end;
int cpu;
cpumask_copy(&cpumask, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &cpumask);
end = get_tod_clock() + (1000000UL << 12);
for_each_cpu(cpu, &cpumask) {
struct pcpu *pcpu = pcpu_devices + cpu;
set_bit(ec_stop_cpu, &pcpu->ec_mask);
while (__pcpu_sigp(pcpu->address, SIGP_EMERGENCY_SIGNAL,
0, NULL) == SIGP_CC_BUSY &&
get_tod_clock() < end)
cpu_relax();
}
while (get_tod_clock() < end) {
for_each_cpu(cpu, &cpumask)
if (pcpu_stopped(pcpu_devices + cpu))
cpumask_clear_cpu(cpu, &cpumask);
if (cpumask_empty(&cpumask))
break;
cpu_relax();
}
}
NOKPROBE_SYMBOL(smp_emergency_stop);
/*
* Stop all cpus but the current one.
*/
void smp_send_stop(void)
{
int cpu;
/* Disable all interrupts/machine checks */
__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
trace_hardirqs_off();
debug_set_critical();
if (oops_in_progress)
smp_emergency_stop();
/* stop all processors */
for_each_online_cpu(cpu) {
if (cpu == smp_processor_id())
continue;
pcpu_sigp_retry(pcpu_devices + cpu, SIGP_STOP, 0);
while (!pcpu_stopped(pcpu_devices + cpu))
cpu_relax();
}
}
/*
* This is the main routine where commands issued by other
* cpus are handled.
*/
static void smp_handle_ext_call(void)
{
unsigned long bits;
/* handle bit signal external calls */
bits = xchg(&pcpu_devices[smp_processor_id()].ec_mask, 0);
if (test_bit(ec_stop_cpu, &bits))
smp_stop_cpu();
if (test_bit(ec_schedule, &bits))
scheduler_ipi();
if (test_bit(ec_call_function_single, &bits))
generic_smp_call_function_single_interrupt();
if (test_bit(ec_mcck_pending, &bits))
s390_handle_mcck();
}
static void do_ext_call_interrupt(struct ext_code ext_code,
unsigned int param32, unsigned long param64)
{
inc_irq_stat(ext_code.code == 0x1202 ? IRQEXT_EXC : IRQEXT_EMS);
smp_handle_ext_call();
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
int cpu;
for_each_cpu(cpu, mask)
pcpu_ec_call(pcpu_devices + cpu, ec_call_function_single);
}
void arch_send_call_function_single_ipi(int cpu)
{
pcpu_ec_call(pcpu_devices + cpu, ec_call_function_single);
}
/*
* this function sends a 'reschedule' IPI to another CPU.
* it goes straight through and wastes no time serializing
* anything. Worst case is that we lose a reschedule ...
*/
void smp_send_reschedule(int cpu)
{
pcpu_ec_call(pcpu_devices + cpu, ec_schedule);
}
/*
* parameter area for the set/clear control bit callbacks
*/
struct ec_creg_mask_parms {
unsigned long orval;
unsigned long andval;
int cr;
};
/*
* callback for setting/clearing control bits
*/
static void smp_ctl_bit_callback(void *info)
{
struct ec_creg_mask_parms *pp = info;
unsigned long cregs[16];
__ctl_store(cregs, 0, 15);
cregs[pp->cr] = (cregs[pp->cr] & pp->andval) | pp->orval;
__ctl_load(cregs, 0, 15);
}
/*
* Set a bit in a control register of all cpus
*/
void smp_ctl_set_bit(int cr, int bit)
{
struct ec_creg_mask_parms parms = { 1UL << bit, -1UL, cr };
on_each_cpu(smp_ctl_bit_callback, &parms, 1);
}
EXPORT_SYMBOL(smp_ctl_set_bit);
/*
* Clear a bit in a control register of all cpus
*/
void smp_ctl_clear_bit(int cr, int bit)
{
struct ec_creg_mask_parms parms = { 0, ~(1UL << bit), cr };
on_each_cpu(smp_ctl_bit_callback, &parms, 1);
}
EXPORT_SYMBOL(smp_ctl_clear_bit);
#ifdef CONFIG_CRASH_DUMP
int smp_store_status(int cpu)
{
struct pcpu *pcpu = pcpu_devices + cpu;
unsigned long pa;
pa = __pa(&pcpu->lowcore->floating_pt_save_area);
if (__pcpu_sigp_relax(pcpu->address, SIGP_STORE_STATUS_AT_ADDRESS,
pa) != SIGP_CC_ORDER_CODE_ACCEPTED)
return -EIO;
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26 21:10:34 +08:00
if (!MACHINE_HAS_VX && !MACHINE_HAS_GS)
return 0;
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26 21:10:34 +08:00
pa = __pa(pcpu->lowcore->mcesad & MCESA_ORIGIN_MASK);
if (MACHINE_HAS_GS)
pa |= pcpu->lowcore->mcesad & MCESA_LC_MASK;
if (__pcpu_sigp_relax(pcpu->address, SIGP_STORE_ADDITIONAL_STATUS,
pa) != SIGP_CC_ORDER_CODE_ACCEPTED)
return -EIO;
return 0;
}
/*
* Collect CPU state of the previous, crashed system.
* There are four cases:
* 1) standard zfcp dump
* condition: OLDMEM_BASE == NULL && ipl_info.type == IPL_TYPE_FCP_DUMP
* The state for all CPUs except the boot CPU needs to be collected
* with sigp stop-and-store-status. The boot CPU state is located in
* the absolute lowcore of the memory stored in the HSA. The zcore code
* will copy the boot CPU state from the HSA.
* 2) stand-alone kdump for SCSI (zfcp dump with swapped memory)
* condition: OLDMEM_BASE != NULL && ipl_info.type == IPL_TYPE_FCP_DUMP
* The state for all CPUs except the boot CPU needs to be collected
* with sigp stop-and-store-status. The firmware or the boot-loader
* stored the registers of the boot CPU in the absolute lowcore in the
* memory of the old system.
* 3) kdump and the old kernel did not store the CPU state,
* or stand-alone kdump for DASD
* condition: OLDMEM_BASE != NULL && !is_kdump_kernel()
* The state for all CPUs except the boot CPU needs to be collected
* with sigp stop-and-store-status. The kexec code or the boot-loader
* stored the registers of the boot CPU in the memory of the old system.
* 4) kdump and the old kernel stored the CPU state
* condition: OLDMEM_BASE != NULL && is_kdump_kernel()
* This case does not exist for s390 anymore, setup_arch explicitly
* deactivates the elfcorehdr= kernel parameter
*/
static __init void smp_save_cpu_vxrs(struct save_area *sa, u16 addr,
bool is_boot_cpu, unsigned long page)
{
__vector128 *vxrs = (__vector128 *) page;
if (is_boot_cpu)
vxrs = boot_cpu_vector_save_area;
else
__pcpu_sigp_relax(addr, SIGP_STORE_ADDITIONAL_STATUS, page);
save_area_add_vxrs(sa, vxrs);
}
static __init void smp_save_cpu_regs(struct save_area *sa, u16 addr,
bool is_boot_cpu, unsigned long page)
{
void *regs = (void *) page;
if (is_boot_cpu)
copy_oldmem_kernel(regs, (void *) __LC_FPREGS_SAVE_AREA, 512);
else
__pcpu_sigp_relax(addr, SIGP_STORE_STATUS_AT_ADDRESS, page);
save_area_add_regs(sa, regs);
}
void __init smp_save_dump_cpus(void)
{
int addr, boot_cpu_addr, max_cpu_addr;
struct save_area *sa;
unsigned long page;
bool is_boot_cpu;
if (!(OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP))
/* No previous system present, normal boot. */
return;
/* Allocate a page as dumping area for the store status sigps */
memblock: drop memblock_alloc_base() The memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter and panics if the allocation fails. Replace its usage with memblock_phys_alloc_range() and make the callers check the return value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-10-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:29:35 +08:00
page = memblock_phys_alloc_range(PAGE_SIZE, PAGE_SIZE, 0, 1UL << 31);
if (!page)
treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:30:31 +08:00
panic("ERROR: Failed to allocate %lx bytes below %lx\n",
memblock: drop memblock_alloc_base() The memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter and panics if the allocation fails. Replace its usage with memblock_phys_alloc_range() and make the callers check the return value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-10-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:29:35 +08:00
PAGE_SIZE, 1UL << 31);
/* Set multi-threading state to the previous system. */
pcpu_set_smt(sclp.mtid_prev);
boot_cpu_addr = stap();
max_cpu_addr = SCLP_MAX_CORES << sclp.mtid_prev;
for (addr = 0; addr <= max_cpu_addr; addr++) {
if (__pcpu_sigp_relax(addr, SIGP_SENSE, 0) ==
SIGP_CC_NOT_OPERATIONAL)
continue;
is_boot_cpu = (addr == boot_cpu_addr);
/* Allocate save area */
sa = save_area_alloc(is_boot_cpu);
if (!sa)
panic("could not allocate memory for save area\n");
if (MACHINE_HAS_VX)
/* Get the vector registers */
smp_save_cpu_vxrs(sa, addr, is_boot_cpu, page);
/*
* For a zfcp dump OLDMEM_BASE == NULL and the registers
* of the boot CPU are stored in the HSA. To retrieve
* these registers an SCLP request is required which is
* done by drivers/s390/char/zcore.c:init_cpu_info()
*/
if (!is_boot_cpu || OLDMEM_BASE)
/* Get the CPU registers */
smp_save_cpu_regs(sa, addr, is_boot_cpu, page);
}
memblock_free(page, PAGE_SIZE);
diag_dma_ops.diag308_reset();
pcpu_set_smt(0);
}
#endif /* CONFIG_CRASH_DUMP */
void smp_cpu_set_polarization(int cpu, int val)
{
pcpu_devices[cpu].polarization = val;
}
int smp_cpu_get_polarization(int cpu)
{
return pcpu_devices[cpu].polarization;
}
int smp_cpu_get_cpu_address(int cpu)
{
return pcpu_devices[cpu].address;
}
static void __ref smp_get_core_info(struct sclp_core_info *info, int early)
{
static int use_sigp_detection;
int address;
if (use_sigp_detection || sclp_get_core_info(info, early)) {
use_sigp_detection = 1;
for (address = 0;
address < (SCLP_MAX_CORES << smp_cpu_mt_shift);
address += (1U << smp_cpu_mt_shift)) {
if (__pcpu_sigp_relax(address, SIGP_SENSE, 0) ==
SIGP_CC_NOT_OPERATIONAL)
continue;
info->core[info->configured].core_id =
address >> smp_cpu_mt_shift;
info->configured++;
}
info->combined = info->configured;
}
}
2013-06-19 05:04:52 +08:00
static int smp_add_present_cpu(int cpu);
static int smp_add_core(struct sclp_core_entry *core, cpumask_t *avail,
bool configured, bool early)
{
struct pcpu *pcpu;
int cpu, nr, i;
u16 address;
nr = 0;
if (sclp.has_core_type && core->type != boot_core_type)
return nr;
cpu = cpumask_first(avail);
address = core->core_id << smp_cpu_mt_shift;
for (i = 0; (i <= smp_cpu_mtid) && (cpu < nr_cpu_ids); i++) {
if (pcpu_find_address(cpu_present_mask, address + i))
continue;
pcpu = pcpu_devices + cpu;
pcpu->address = address + i;
if (configured)
pcpu->state = CPU_STATE_CONFIGURED;
else
pcpu->state = CPU_STATE_STANDBY;
smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
set_cpu_present(cpu, true);
if (!early && smp_add_present_cpu(cpu) != 0)
set_cpu_present(cpu, false);
else
nr++;
cpumask_clear_cpu(cpu, avail);
cpu = cpumask_next(cpu, avail);
}
return nr;
}
static int __smp_rescan_cpus(struct sclp_core_info *info, bool early)
{
struct sclp_core_entry *core;
cpumask_t avail;
bool configured;
u16 core_id;
int nr, i;
nr = 0;
cpumask_xor(&avail, cpu_possible_mask, cpu_present_mask);
/*
* Add IPL core first (which got logical CPU number 0) to make sure
* that all SMT threads get subsequent logical CPU numbers.
*/
if (early) {
core_id = pcpu_devices[0].address >> smp_cpu_mt_shift;
for (i = 0; i < info->configured; i++) {
core = &info->core[i];
if (core->core_id == core_id) {
nr += smp_add_core(core, &avail, true, early);
break;
}
}
}
for (i = 0; i < info->combined; i++) {
configured = i < info->configured;
nr += smp_add_core(&info->core[i], &avail, configured, early);
}
return nr;
}
void __init smp_detect_cpus(void)
{
unsigned int cpu, mtid, c_cpus, s_cpus;
struct sclp_core_info *info;
u16 address;
/* Get CPU information */
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:08:04 +08:00
info = memblock_alloc(sizeof(*info), 8);
treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:30:31 +08:00
if (!info)
panic("%s: Failed to allocate %zu bytes align=0x%x\n",
__func__, sizeof(*info), 8);
smp_get_core_info(info, 1);
/* Find boot CPU type */
if (sclp.has_core_type) {
address = stap();
for (cpu = 0; cpu < info->combined; cpu++)
if (info->core[cpu].core_id == address) {
/* The boot cpu dictates the cpu type. */
boot_core_type = info->core[cpu].type;
break;
}
if (cpu >= info->combined)
panic("Could not find boot CPU type");
}
/* Set multi-threading state for the current system */
mtid = boot_core_type ? sclp.mtid : sclp.mtid_cp;
mtid = (mtid < smp_max_threads) ? mtid : smp_max_threads - 1;
pcpu_set_smt(mtid);
/* Print number of CPUs */
c_cpus = s_cpus = 0;
for (cpu = 0; cpu < info->combined; cpu++) {
if (sclp.has_core_type &&
info->core[cpu].type != boot_core_type)
continue;
if (cpu < info->configured)
c_cpus += smp_cpu_mtid + 1;
else
s_cpus += smp_cpu_mtid + 1;
}
pr_info("%d configured CPUs, %d standby CPUs\n", c_cpus, s_cpus);
/* Add CPUs present at boot */
get_online_cpus();
__smp_rescan_cpus(info, true);
put_online_cpus();
memblock_free_early((unsigned long)info, sizeof(*info));
}
static void smp_init_secondary(void)
{
int cpu = smp_processor_id();
S390_lowcore.last_update_clock = get_tod_clock();
restore_access_regs(S390_lowcore.access_regs_save_area);
s390/smp,vdso: fix ASCE handling When a secondary CPU is brought up it must initialize its control registers. CPU A which triggers that a secondary CPU B is brought up stores its control register contents into the lowcore of new CPU B, which then loads these values on startup. This is problematic in various ways: the control register which contains the home space ASCE will correctly contain the kernel ASCE; however control registers for primary and secondary ASCEs are initialized with whatever values were present in CPU A. Typically: - the primary ASCE will contain the user process ASCE of the process that triggered onlining of CPU B. - the secondary ASCE will contain the percpu VDSO ASCE of CPU A. Due to lazy ASCE handling we may also end up with other combinations. When then CPU B switches to a different process (!= idle) it will fixup the primary ASCE. However the problem is that the (wrong) ASCE from CPU A was loaded into control register 1: as soon as an ASCE is attached (aka loaded) a CPU is free to generate TLB entries using that address space. Even though it is very unlikey that CPU B will actually generate such entries, this could result in TLB entries of the address space of the process that ran on CPU A. These entries shouldn't exist at all and could cause problems later on. Furthermore the secondary ASCE of CPU B will not be updated correctly. This means that processes may see wrong results or even crash if they access VDSO data on CPU B. The correct VDSO ASCE will eventually be loaded on return to user space as soon as the kernel executed a call to strnlen_user or an atomic futex operation on CPU B. Fix both issues by intializing the to be loaded control register contents with the correct ASCEs and also enforce (re-)loading of the ASCEs upon first context switch and return to user space. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-18 20:09:52 +08:00
set_cpu_flag(CIF_ASCE_PRIMARY);
set_cpu_flag(CIF_ASCE_SECONDARY);
cpu_init();
preempt_disable();
init_cpu_timer();
vtime_init();
pfault_init();
notify_cpu_starting(cpu);
if (topology_cpu_dedicated(cpu))
set_cpu_flag(CIF_DEDICATED_CPU);
else
clear_cpu_flag(CIF_DEDICATED_CPU);
set_cpu_online(cpu, true);
update_cpu_masks();
inc_irq_stat(CPU_RST);
local_irq_enable();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
}
/*
* Activate a secondary processor.
*/
static void __no_sanitize_address smp_start_secondary(void *cpuvoid)
{
S390_lowcore.restart_stack = (unsigned long) restart_stack;
S390_lowcore.restart_fn = (unsigned long) do_restart;
S390_lowcore.restart_data = 0;
S390_lowcore.restart_source = -1UL;
__ctl_load(S390_lowcore.cregs_save_area, 0, 15);
__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
CALL_ON_STACK_NORETURN(smp_init_secondary, S390_lowcore.kernel_stack);
}
/* Upping and downing of CPUs */
2013-06-19 05:04:52 +08:00
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
struct pcpu *pcpu;
int base, i, rc;
pcpu = pcpu_devices + cpu;
if (pcpu->state != CPU_STATE_CONFIGURED)
return -EIO;
base = smp_get_base_cpu(cpu);
for (i = 0; i <= smp_cpu_mtid; i++) {
if (base + i < nr_cpu_ids)
if (cpu_online(base + i))
break;
}
/*
* If this is the first CPU of the core to get online
* do an initial CPU reset.
*/
if (i > smp_cpu_mtid &&
pcpu_sigp_retry(pcpu_devices + base, SIGP_INITIAL_CPU_RESET, 0) !=
SIGP_CC_ORDER_CODE_ACCEPTED)
return -EIO;
rc = pcpu_alloc_lowcore(pcpu, cpu);
if (rc)
return rc;
pcpu_prepare_secondary(pcpu, cpu);
pcpu_attach_task(pcpu, tidle);
pcpu_start_fn(pcpu, smp_start_secondary, NULL);
/* Wait until cpu puts itself in the online & active maps */
while (!cpu_online(cpu))
cpu_relax();
return 0;
}
static unsigned int setup_possible_cpus __initdata;
static int __init _setup_possible_cpus(char *s)
{
get_option(&s, &setup_possible_cpus);
return 0;
}
early_param("possible_cpus", _setup_possible_cpus);
int __cpu_disable(void)
{
unsigned long cregs[16];
/* Handle possible pending IPIs */
smp_handle_ext_call();
set_cpu_online(smp_processor_id(), false);
update_cpu_masks();
/* Disable pseudo page faults on this cpu. */
pfault_fini();
/* Disable interrupt sources via control register. */
__ctl_store(cregs, 0, 15);
cregs[0] &= ~0x0000ee70UL; /* disable all external interrupts */
cregs[6] &= ~0xff000000UL; /* disable all I/O interrupts */
cregs[14] &= ~0x1f000000UL; /* disable most machine checks */
__ctl_load(cregs, 0, 15);
clear_cpu_flag(CIF_NOHZ_DELAY);
return 0;
}
void __cpu_die(unsigned int cpu)
{
struct pcpu *pcpu;
/* Wait until target cpu is down */
pcpu = pcpu_devices + cpu;
while (!pcpu_stopped(pcpu))
cpu_relax();
pcpu_free_lowcore(pcpu);
cpumask_clear_cpu(cpu, mm_cpumask(&init_mm));
cpumask_clear_cpu(cpu, &init_mm.context.cpu_attach_mask);
}
void __noreturn cpu_die(void)
{
idle_task_exit();
__bpon();
pcpu_sigp_retry(pcpu_devices + smp_processor_id(), SIGP_STOP, 0);
for (;;) ;
}
void __init smp_fill_possible_mask(void)
{
unsigned int possible, sclp_max, cpu;
sclp_max = max(sclp.mtid, sclp.mtid_cp) + 1;
sclp_max = min(smp_max_threads, sclp_max);
sclp_max = (sclp.max_cores * sclp_max) ?: nr_cpu_ids;
possible = setup_possible_cpus ?: nr_cpu_ids;
possible = min(possible, sclp_max);
for (cpu = 0; cpu < possible && cpu < nr_cpu_ids; cpu++)
set_cpu_possible(cpu, true);
}
void __init smp_prepare_cpus(unsigned int max_cpus)
{
/* request the 0x1201 emergency signal external interrupt */
if (register_external_irq(EXT_IRQ_EMERGENCY_SIG, do_ext_call_interrupt))
panic("Couldn't request external interrupt 0x1201");
/* request the 0x1202 external call external interrupt */
if (register_external_irq(EXT_IRQ_EXTERNAL_CALL, do_ext_call_interrupt))
panic("Couldn't request external interrupt 0x1202");
}
void __init smp_prepare_boot_cpu(void)
{
struct pcpu *pcpu = pcpu_devices;
s390/smp: fix ipl from cpu with non-zero address Commit af51160ebd3c ("s390/smp: initialize cpu_present_mask in setup_arch") initializes the cpu_present_mask much earlier than before. However the cpu detection code relies on the fact that iff logical cpu 0 is marked present then also the corresponding physical cpu address within the pcpu_devices array slot is valid. Since commit 44fd22992cb7 ("[PATCH] Register the boot-cpu in the cpu maps earlier") this assumption is not true anymore. The patch marks logical cpu 0 as present in common code without that architecture code had a chance to setup the logical to physical map. With that change the cpu detection code assumes that the physical cpu address of cpu 0 is also 0, which is not necessarily true. Subsequently the physical cpu address of the ipl cpu will be mapped to a different logical cpu. If that cpu is brought online later the ipl cpu will send itself an initial cpu reset sigp signal. This in turn completely resets the ipl cpu and the system stops working. A dump of such a system looks like a "store status" has been forgotten. But actually the kernel itself removed all traces which would allow to easily tell what went wrong. To fix this initialize the logical to physical cpu address already in smp_setup_processor_id(). In addition remove the initialization of the cpu_present_mask and cpu_online_mask for cpu 0, since that has already been done. Also add a sanity check, just in case common code will be changed again... The problem can be easily reproduced within a z/VM guest: > chcpu -d 0 > vmcp ipl Fixes: af51160ebd3c ("s390/smp: initialize cpu_present_mask in setup_arch") Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-16 18:02:36 +08:00
WARN_ON(!cpu_present(0) || !cpu_online(0));
pcpu->state = CPU_STATE_CONFIGURED;
pcpu->lowcore = (struct lowcore *)(unsigned long) store_prefix();
S390_lowcore.percpu_offset = __per_cpu_offset[0];
smp_cpu_set_polarization(0, POLARIZATION_UNKNOWN);
}
void __init smp_setup_processor_id(void)
{
s390/smp: fix ipl from cpu with non-zero address Commit af51160ebd3c ("s390/smp: initialize cpu_present_mask in setup_arch") initializes the cpu_present_mask much earlier than before. However the cpu detection code relies on the fact that iff logical cpu 0 is marked present then also the corresponding physical cpu address within the pcpu_devices array slot is valid. Since commit 44fd22992cb7 ("[PATCH] Register the boot-cpu in the cpu maps earlier") this assumption is not true anymore. The patch marks logical cpu 0 as present in common code without that architecture code had a chance to setup the logical to physical map. With that change the cpu detection code assumes that the physical cpu address of cpu 0 is also 0, which is not necessarily true. Subsequently the physical cpu address of the ipl cpu will be mapped to a different logical cpu. If that cpu is brought online later the ipl cpu will send itself an initial cpu reset sigp signal. This in turn completely resets the ipl cpu and the system stops working. A dump of such a system looks like a "store status" has been forgotten. But actually the kernel itself removed all traces which would allow to easily tell what went wrong. To fix this initialize the logical to physical cpu address already in smp_setup_processor_id(). In addition remove the initialization of the cpu_present_mask and cpu_online_mask for cpu 0, since that has already been done. Also add a sanity check, just in case common code will be changed again... The problem can be easily reproduced within a z/VM guest: > chcpu -d 0 > vmcp ipl Fixes: af51160ebd3c ("s390/smp: initialize cpu_present_mask in setup_arch") Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-16 18:02:36 +08:00
pcpu_devices[0].address = stap();
S390_lowcore.cpu_nr = 0;
S390_lowcore.spinlock_lockval = arch_spin_lockval(0);
s390/spinlock: introduce spinlock wait queueing The queued spinlock code for s390 follows the principles of the common code qspinlock implementation but with a few notable differences. The format of the spinlock_t locking word differs, s390 needs to store the logical CPU number of the lock holder in the spinlock_t to be able to use the diagnose 9c directed yield hypervisor call. The inline code sequences for spin_lock and spin_unlock are nice and short. The inline portion of a spin_lock now typically looks like this: lhi %r0,0 # 0 indicates an empty lock l %r1,0x3a0 # CPU number + 1 from lowcore cs %r0,%r1,<some_lock> # lock operation jnz call_wait # on failure call wait function locked: ... call_wait: la %r2,<some_lock> brasl %r14,arch_spin_lock_wait j locked A spin_unlock is as simple as before: lhi %r0,0 sth %r0,2(%r2) # unlock operation After a CPU has queued itself it may not enable interrupts again for the arch_spin_lock_flags() variant. The arch_spin_lock_wait_flags wait function is removed. To improve performance the code implements opportunistic lock stealing. If the wait function finds a spinlock_t that indicates that the lock is free but there are queued waiters, the CPU may steal the lock up to three times without queueing itself. The lock stealing update the steal counter in the lock word to prevent more than 3 steals. The counter is reset at the time the CPU next in the queue successfully takes the lock. While the queued spinlocks improve performance in a system with dedicated CPUs, in a virtualized environment with continuously overcommitted CPUs the queued spinlocks can have a negative effect on performance. This is due to the fact that a queued CPU that is preempted by the hypervisor will block the queue at some point even without holding the lock. With the classic spinlock it does not matter if a CPU is preempted that waits for the lock. Therefore use the queued spinlock code only if the system runs with dedicated CPUs and fall back to classic spinlocks when running with shared CPUs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-25 00:25:02 +08:00
S390_lowcore.spinlock_index = 0;
}
/*
* the frequency of the profiling timer can be changed
* by writing a multiplier value into /proc/profile.
*
* usually you want to run this on all CPUs ;)
*/
int setup_profiling_timer(unsigned int multiplier)
{
return 0;
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t cpu_configure_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
ssize_t count;
mutex_lock(&smp_cpu_state_mutex);
count = sprintf(buf, "%d\n", pcpu_devices[dev->id].state);
mutex_unlock(&smp_cpu_state_mutex);
return count;
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t cpu_configure_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct pcpu *pcpu;
int cpu, val, rc, i;
char delim;
if (sscanf(buf, "%d %c", &val, &delim) != 1)
return -EINVAL;
if (val != 0 && val != 1)
return -EINVAL;
get_online_cpus();
mutex_lock(&smp_cpu_state_mutex);
rc = -EBUSY;
/* disallow configuration changes of online cpus and cpu 0 */
cpu = dev->id;
cpu = smp_get_base_cpu(cpu);
if (cpu == 0)
goto out;
for (i = 0; i <= smp_cpu_mtid; i++)
if (cpu_online(cpu + i))
goto out;
pcpu = pcpu_devices + cpu;
rc = 0;
switch (val) {
case 0:
if (pcpu->state != CPU_STATE_CONFIGURED)
break;
rc = sclp_core_deconfigure(pcpu->address >> smp_cpu_mt_shift);
if (rc)
break;
for (i = 0; i <= smp_cpu_mtid; i++) {
if (cpu + i >= nr_cpu_ids || !cpu_present(cpu + i))
continue;
pcpu[i].state = CPU_STATE_STANDBY;
smp_cpu_set_polarization(cpu + i,
POLARIZATION_UNKNOWN);
}
topology_expect_change();
break;
case 1:
if (pcpu->state != CPU_STATE_STANDBY)
break;
rc = sclp_core_configure(pcpu->address >> smp_cpu_mt_shift);
if (rc)
break;
for (i = 0; i <= smp_cpu_mtid; i++) {
if (cpu + i >= nr_cpu_ids || !cpu_present(cpu + i))
continue;
pcpu[i].state = CPU_STATE_CONFIGURED;
smp_cpu_set_polarization(cpu + i,
POLARIZATION_UNKNOWN);
}
topology_expect_change();
break;
default:
break;
}
out:
mutex_unlock(&smp_cpu_state_mutex);
put_online_cpus();
return rc ? rc : count;
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t show_cpu_address(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", pcpu_devices[dev->id].address);
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static DEVICE_ATTR(address, 0444, show_cpu_address, NULL);
static struct attribute *cpu_common_attrs[] = {
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
&dev_attr_configure.attr,
&dev_attr_address.attr,
NULL,
};
static struct attribute_group cpu_common_attr_group = {
.attrs = cpu_common_attrs,
};
static struct attribute *cpu_online_attrs[] = {
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
&dev_attr_idle_count.attr,
&dev_attr_idle_time_us.attr,
NULL,
};
static struct attribute_group cpu_online_attr_group = {
.attrs = cpu_online_attrs,
};
static int smp_cpu_online(unsigned int cpu)
{
struct device *s = &per_cpu(cpu_device, cpu)->dev;
return sysfs_create_group(&s->kobj, &cpu_online_attr_group);
}
static int smp_cpu_pre_down(unsigned int cpu)
{
struct device *s = &per_cpu(cpu_device, cpu)->dev;
sysfs_remove_group(&s->kobj, &cpu_online_attr_group);
return 0;
}
2013-06-19 05:04:52 +08:00
static int smp_add_present_cpu(int cpu)
{
struct device *s;
struct cpu *c;
int rc;
c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
per_cpu(cpu_device, cpu) = c;
s = &c->dev;
c->hotpluggable = 1;
rc = register_cpu(c, cpu);
if (rc)
goto out;
rc = sysfs_create_group(&s->kobj, &cpu_common_attr_group);
if (rc)
goto out_cpu;
rc = topology_cpu_init(c);
if (rc)
goto out_topology;
return 0;
out_topology:
sysfs_remove_group(&s->kobj, &cpu_common_attr_group);
out_cpu:
unregister_cpu(c);
out:
return rc;
}
int __ref smp_rescan_cpus(void)
{
struct sclp_core_info *info;
int nr;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
smp_get_core_info(info, 0);
get_online_cpus();
mutex_lock(&smp_cpu_state_mutex);
nr = __smp_rescan_cpus(info, false);
mutex_unlock(&smp_cpu_state_mutex);
put_online_cpus();
kfree(info);
if (nr)
[S390] Vertical cpu management. If vertical cpu polarization is active then the hypervisor will dispatch certain cpus for a longer time than other cpus for maximum performance. For example if a guest would have three virtual cpus, each of them with a share of 33 percent, then in case of vertical cpu polarization all of the processing time would be combined to a single cpu which would run all the time, while the other two cpus would get nearly no cpu time. There are three different types of vertical cpus: high, medium and low. Low cpus hardly get any real cpu time, while high cpus get a full real cpu. Medium cpus get something in between. In order to switch between the two possible modes (default is horizontal) a 0 for horizontal polarization or a 1 for vertical polarization must be written to the dispatching sysfs attribute: /sys/devices/system/cpu/dispatching The polarization of each single cpu can be figured out by the polarization sysfs attribute of each cpu: /sys/devices/system/cpu/cpuX/polarization horizontal, vertical:high, vertical:medium, vertical:low or unknown. When switching polarization the polarization attribute may contain the value unknown until the configuration change is done and the kernel has figured out the new polarization of each cpu. Note that running a system with different types of vertical cpus may result in significant performance regressions. If possible only one type of vertical cpus should be used. All other cpus should be offlined. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:46:13 +08:00
topology_schedule_update();
return 0;
}
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
static ssize_t __ref rescan_store(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t count)
{
int rc;
rc = lock_device_hotplug_sysfs();
if (rc)
return rc;
rc = smp_rescan_cpus();
unlock_device_hotplug();
return rc ? rc : count;
}
static DEVICE_ATTR_WO(rescan);
static int __init s390_smp_init(void)
{
int cpu, rc = 0;
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-22 06:29:42 +08:00
rc = device_create_file(cpu_subsys.dev_root, &dev_attr_rescan);
if (rc)
return rc;
for_each_present_cpu(cpu) {
rc = smp_add_present_cpu(cpu);
if (rc)
goto out;
}
rc = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "s390/smp:online",
smp_cpu_online, smp_cpu_pre_down);
rc = rc <= 0 ? rc : 0;
out:
return rc;
}
subsys_initcall(s390_smp_init);