linux-sg2042/ipc/sem.c

1642 lines
40 KiB
C
Raw Normal View History

/*
* linux/ipc/sem.c
* Copyright (C) 1992 Krishna Balasubramanian
* Copyright (C) 1995 Eric Schenk, Bruno Haible
*
* /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
*
* SMP-threaded, sysctl's added
* (c) 1999 Manfred Spraul <manfred@colorfullife.com>
* Enforced range limit on SEM_UNDO
* (c) 2001 Red Hat Inc
* Lockless wakeup
* (c) 2003 Manfred Spraul <manfred@colorfullife.com>
* Further wakeup optimizations, documentation
* (c) 2010 Manfred Spraul <manfred@colorfullife.com>
[PATCH] Rework of IPC auditing 1) The audit_ipc_perms() function has been split into two different functions: - audit_ipc_obj() - audit_ipc_set_perm() There's a key shift here... The audit_ipc_obj() collects the uid, gid, mode, and SElinux context label of the current ipc object. This audit_ipc_obj() hook is now found in several places. Most notably, it is hooked in ipcperms(), which is called in various places around the ipc code permforming a MAC check. Additionally there are several places where *checkid() is used to validate that an operation is being performed on a valid object while not necessarily having a nearby ipcperms() call. In these locations, audit_ipc_obj() is called to ensure that the information is captured by the audit system. The audit_set_new_perm() function is called any time the permissions on the ipc object changes. In this case, the NEW permissions are recorded (and note that an audit_ipc_obj() call exists just a few lines before each instance). 2) Support for an AUDIT_IPC_SET_PERM audit message type. This allows for separate auxiliary audit records for normal operations on an IPC object and permissions changes. Note that the same struct audit_aux_data_ipcctl is used and populated, however there are separate audit_log_format statements based on the type of the message. Finally, the AUDIT_IPC block of code in audit_free_aux() was extended to handle aux messages of this new type. No more mem leaks I hope ;-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-04-03 05:07:33 +08:00
*
* support for audit of ipc object properties and permission changes
* Dustin Kirkland <dustin.kirkland@us.ibm.com>
*
* namespaces support
* OpenVZ, SWsoft Inc.
* Pavel Emelianov <xemul@openvz.org>
*
* Implementation notes: (May 2010)
* This file implements System V semaphores.
*
* User space visible behavior:
* - FIFO ordering for semop() operations (just FIFO, not starvation
* protection)
* - multiple semaphore operations that alter the same semaphore in
* one semop() are handled.
* - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and
* SETALL calls.
* - two Linux specific semctl() commands: SEM_STAT, SEM_INFO.
* - undo adjustments at process exit are limited to 0..SEMVMX.
* - namespace are supported.
* - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing
* to /proc/sys/kernel/sem.
* - statistics about the usage are reported in /proc/sysvipc/sem.
*
* Internals:
* - scalability:
* - all global variables are read-mostly.
* - semop() calls and semctl(RMID) are synchronized by RCU.
* - most operations do write operations (actually: spin_lock calls) to
* the per-semaphore array structure.
* Thus: Perfect SMP scaling between independent semaphore arrays.
* If multiple semaphores in one array are used, then cache line
* trashing on the semaphore array spinlock will limit the scaling.
* - semncnt and semzcnt are calculated on demand in count_semncnt() and
* count_semzcnt()
* - the task that performs a successful semop() scans the list of all
* sleeping tasks and completes any pending operations that can be fulfilled.
* Semaphores are actively given to waiting tasks (necessary for FIFO).
* (see update_queue())
* - To improve the scalability, the actual wake-up calls are performed after
* dropping all locks. (see wake_up_sem_queue_prepare(),
* wake_up_sem_queue_do())
* - All work is done by the waker, the woken up task does not have to do
* anything - not even acquiring a lock or dropping a refcount.
* - A woken up task may not even touch the semaphore array anymore, it may
* have been destroyed already by a semctl(RMID).
* - The synchronizations between wake-ups due to a timeout/signal and a
* wake-up due to a completed semaphore operation is achieved by using an
* intermediate state (IN_WAKEUP).
* - UNDO values are stored in an array (one per process and per
* semaphore array, lazily allocated). For backwards compatibility, multiple
* modes for the UNDO variables are supported (per process, per thread)
* (see copy_semundo, CLONE_SYSVSEM)
* - There are two lists of the pending operations: a per-array list
* and per-semaphore list (stored in the array). This allows to achieve FIFO
* ordering without always scanning all pending operations.
* The worst-case behavior is nevertheless O(N^2) for N wakeups.
*/
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/time.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/audit.h>
#include <linux/capability.h>
#include <linux/seq_file.h>
#include <linux/rwsem.h>
#include <linux/nsproxy.h>
namespaces: move the IPC namespace under IPC_NS option Currently the IPC namespace management code is spread over the ipc/*.c files. I moved this code into ipc/namespace.c file which is compiled out when needed. The linux/ipc_namespace.h file is used to store the prototypes of the functions in namespace.c and the stubs for NAMESPACES=n case. This is done so, because the stub for copy_ipc_namespace requires the knowledge of the CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in included into many many .c files via the sys.h->sem.h sequence so adding the sched.h into it will make all these .c depend on sched.h which is not that good. On the other hand the knowledge about the namespaces stuff is required in 4 .c files only. Besides, this patch compiles out some auxiliary functions from ipc/sem.c, msg.c and shm.c files. It turned out that moving these functions into namespaces.c is not that easy because they use many other calls and macros from the original file. Moving them would make this patch complicated. On the other hand all these functions can be consolidated, so I will send a separate patch doing this a bit later. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 20:18:22 +08:00
#include <linux/ipc_namespace.h>
#include <asm/uaccess.h>
#include "util.h"
#define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
#define sem_unlock(sma) ipc_unlock(&(sma)->sem_perm)
#define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid)
static int newary(struct ipc_namespace *, struct ipc_params *);
static void freeary(struct ipc_namespace *, struct kern_ipc_perm *);
#ifdef CONFIG_PROC_FS
static int sysvipc_sem_proc_show(struct seq_file *s, void *it);
#endif
#define SEMMSL_FAST 256 /* 512 bytes on stack */
#define SEMOPM_FAST 64 /* ~ 372 bytes on stack */
/*
* linked list protection:
* sem_undo.id_next,
* sem_array.sem_pending{,last},
* sem_array.sem_undo: sem_lock() for read/write
* sem_undo.proc_next: only "current" is allowed to read/write that field.
*
*/
#define sc_semmsl sem_ctls[0]
#define sc_semmns sem_ctls[1]
#define sc_semopm sem_ctls[2]
#define sc_semmni sem_ctls[3]
void sem_init_ns(struct ipc_namespace *ns)
{
ns->sc_semmsl = SEMMSL;
ns->sc_semmns = SEMMNS;
ns->sc_semopm = SEMOPM;
ns->sc_semmni = SEMMNI;
ns->used_sems = 0;
ipc_init_ids(&ns->ids[IPC_SEM_IDS]);
}
namespaces: move the IPC namespace under IPC_NS option Currently the IPC namespace management code is spread over the ipc/*.c files. I moved this code into ipc/namespace.c file which is compiled out when needed. The linux/ipc_namespace.h file is used to store the prototypes of the functions in namespace.c and the stubs for NAMESPACES=n case. This is done so, because the stub for copy_ipc_namespace requires the knowledge of the CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in included into many many .c files via the sys.h->sem.h sequence so adding the sched.h into it will make all these .c depend on sched.h which is not that good. On the other hand the knowledge about the namespaces stuff is required in 4 .c files only. Besides, this patch compiles out some auxiliary functions from ipc/sem.c, msg.c and shm.c files. It turned out that moving these functions into namespaces.c is not that easy because they use many other calls and macros from the original file. Moving them would make this patch complicated. On the other hand all these functions can be consolidated, so I will send a separate patch doing this a bit later. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 20:18:22 +08:00
#ifdef CONFIG_IPC_NS
void sem_exit_ns(struct ipc_namespace *ns)
{
free_ipcs(ns, &sem_ids(ns), freeary);
idr_destroy(&ns->ids[IPC_SEM_IDS].ipcs_idr);
}
namespaces: move the IPC namespace under IPC_NS option Currently the IPC namespace management code is spread over the ipc/*.c files. I moved this code into ipc/namespace.c file which is compiled out when needed. The linux/ipc_namespace.h file is used to store the prototypes of the functions in namespace.c and the stubs for NAMESPACES=n case. This is done so, because the stub for copy_ipc_namespace requires the knowledge of the CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in included into many many .c files via the sys.h->sem.h sequence so adding the sched.h into it will make all these .c depend on sched.h which is not that good. On the other hand the knowledge about the namespaces stuff is required in 4 .c files only. Besides, this patch compiles out some auxiliary functions from ipc/sem.c, msg.c and shm.c files. It turned out that moving these functions into namespaces.c is not that easy because they use many other calls and macros from the original file. Moving them would make this patch complicated. On the other hand all these functions can be consolidated, so I will send a separate patch doing this a bit later. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 20:18:22 +08:00
#endif
void __init sem_init (void)
{
sem_init_ns(&init_ipc_ns);
ipc_init_proc_interface("sysvipc/sem",
" key semid perms nsems uid gid cuid cgid otime ctime\n",
IPC_SEM_IDS, sysvipc_sem_proc_show);
}
/*
* sem_lock_(check_) routines are called in the paths where the rw_mutex
* is not held.
*/
static inline struct sem_array *sem_lock(struct ipc_namespace *ns, int id)
{
struct kern_ipc_perm *ipcp = ipc_lock(&sem_ids(ns), id);
if (IS_ERR(ipcp))
return (struct sem_array *)ipcp;
return container_of(ipcp, struct sem_array, sem_perm);
}
static inline struct sem_array *sem_lock_check(struct ipc_namespace *ns,
int id)
{
struct kern_ipc_perm *ipcp = ipc_lock_check(&sem_ids(ns), id);
if (IS_ERR(ipcp))
return (struct sem_array *)ipcp;
return container_of(ipcp, struct sem_array, sem_perm);
}
static inline void sem_lock_and_putref(struct sem_array *sma)
{
ipc_lock_by_ptr(&sma->sem_perm);
ipc_rcu_putref(sma);
}
static inline void sem_getref_and_unlock(struct sem_array *sma)
{
ipc_rcu_getref(sma);
ipc_unlock(&(sma)->sem_perm);
}
static inline void sem_putref(struct sem_array *sma)
{
ipc_lock_by_ptr(&sma->sem_perm);
ipc_rcu_putref(sma);
ipc_unlock(&(sma)->sem_perm);
}
static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
{
ipc_rmid(&sem_ids(ns), &s->sem_perm);
}
/*
* Lockless wakeup algorithm:
* Without the check/retry algorithm a lockless wakeup is possible:
* - queue.status is initialized to -EINTR before blocking.
* - wakeup is performed by
* * unlinking the queue entry from sma->sem_pending
* * setting queue.status to IN_WAKEUP
* This is the notification for the blocked thread that a
* result value is imminent.
* * call wake_up_process
* * set queue.status to the final value.
* - the previously blocked thread checks queue.status:
* * if it's IN_WAKEUP, then it must wait until the value changes
* * if it's not -EINTR, then the operation was completed by
* update_queue. semtimedop can return queue.status without
* performing any operation on the sem array.
* * otherwise it must acquire the spinlock and check what's up.
*
* The two-stage algorithm is necessary to protect against the following
* races:
* - if queue.status is set after wake_up_process, then the woken up idle
* thread could race forward and try (and fail) to acquire sma->lock
* before update_queue had a chance to set queue.status
* - if queue.status is written before wake_up_process and if the
* blocked process is woken up by a signal between writing
* queue.status and the wake_up_process, then the woken up
* process could return from semtimedop and die by calling
* sys_exit before wake_up_process is called. Then wake_up_process
* will oops, because the task structure is already invalid.
* (yes, this happened on s390 with sysv msg).
*
*/
#define IN_WAKEUP 1
/**
* newary - Create a new semaphore set
* @ns: namespace
* @params: ptr to the structure that contains key, semflg and nsems
*
* Called with sem_ids.rw_mutex held (as a writer)
*/
static int newary(struct ipc_namespace *ns, struct ipc_params *params)
{
int id;
int retval;
struct sem_array *sma;
int size;
key_t key = params->key;
int nsems = params->u.nsems;
int semflg = params->flg;
int i;
if (!nsems)
return -EINVAL;
if (ns->used_sems + nsems > ns->sc_semmns)
return -ENOSPC;
size = sizeof (*sma) + nsems * sizeof (struct sem);
sma = ipc_rcu_alloc(size);
if (!sma) {
return -ENOMEM;
}
memset (sma, 0, size);
sma->sem_perm.mode = (semflg & S_IRWXUGO);
sma->sem_perm.key = key;
sma->sem_perm.security = NULL;
retval = security_sem_alloc(sma);
if (retval) {
ipc_rcu_putref(sma);
return retval;
}
id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
if (id < 0) {
security_sem_free(sma);
ipc_rcu_putref(sma);
return id;
}
ns->used_sems += nsems;
sma->sem_base = (struct sem *) &sma[1];
for (i = 0; i < nsems; i++)
INIT_LIST_HEAD(&sma->sem_base[i].sem_pending);
sma->complex_count = 0;
INIT_LIST_HEAD(&sma->sem_pending);
INIT_LIST_HEAD(&sma->list_id);
sma->sem_nsems = nsems;
sma->sem_ctime = get_seconds();
sem_unlock(sma);
return sma->sem_perm.id;
}
/*
* Called with sem_ids.rw_mutex and ipcp locked.
*/
static inline int sem_security(struct kern_ipc_perm *ipcp, int semflg)
{
struct sem_array *sma;
sma = container_of(ipcp, struct sem_array, sem_perm);
return security_sem_associate(sma, semflg);
}
/*
* Called with sem_ids.rw_mutex and ipcp locked.
*/
static inline int sem_more_checks(struct kern_ipc_perm *ipcp,
struct ipc_params *params)
{
struct sem_array *sma;
sma = container_of(ipcp, struct sem_array, sem_perm);
if (params->u.nsems > sma->sem_nsems)
return -EINVAL;
return 0;
}
SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
{
struct ipc_namespace *ns;
struct ipc_ops sem_ops;
struct ipc_params sem_params;
ns = current->nsproxy->ipc_ns;
if (nsems < 0 || nsems > ns->sc_semmsl)
return -EINVAL;
sem_ops.getnew = newary;
sem_ops.associate = sem_security;
sem_ops.more_checks = sem_more_checks;
sem_params.key = key;
sem_params.flg = semflg;
sem_params.u.nsems = nsems;
return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params);
}
/*
* Determine whether a sequence of semaphore operations would succeed
* all at once. Return 0 if yes, 1 if need to sleep, else return error code.
*/
static int try_atomic_semop (struct sem_array * sma, struct sembuf * sops,
int nsops, struct sem_undo *un, int pid)
{
int result, sem_op;
struct sembuf *sop;
struct sem * curr;
for (sop = sops; sop < sops + nsops; sop++) {
curr = sma->sem_base + sop->sem_num;
sem_op = sop->sem_op;
result = curr->semval;
if (!sem_op && result)
goto would_block;
result += sem_op;
if (result < 0)
goto would_block;
if (result > SEMVMX)
goto out_of_range;
if (sop->sem_flg & SEM_UNDO) {
int undo = un->semadj[sop->sem_num] - sem_op;
/*
* Exceeding the undo range is an error.
*/
if (undo < (-SEMAEM - 1) || undo > SEMAEM)
goto out_of_range;
}
curr->semval = result;
}
sop--;
while (sop >= sops) {
sma->sem_base[sop->sem_num].sempid = pid;
if (sop->sem_flg & SEM_UNDO)
un->semadj[sop->sem_num] -= sop->sem_op;
sop--;
}
return 0;
out_of_range:
result = -ERANGE;
goto undo;
would_block:
if (sop->sem_flg & IPC_NOWAIT)
result = -EAGAIN;
else
result = 1;
undo:
sop--;
while (sop >= sops) {
sma->sem_base[sop->sem_num].semval -= sop->sem_op;
sop--;
}
return result;
}
/** wake_up_sem_queue_prepare(q, error): Prepare wake-up
* @q: queue entry that must be signaled
* @error: Error value for the signal
*
* Prepare the wake-up of the queue entry q.
*/
static void wake_up_sem_queue_prepare(struct list_head *pt,
struct sem_queue *q, int error)
{
if (list_empty(pt)) {
/*
* Hold preempt off so that we don't get preempted and have the
* wakee busy-wait until we're scheduled back on.
*/
preempt_disable();
}
q->status = IN_WAKEUP;
q->pid = error;
list_add_tail(&q->simple_list, pt);
}
/**
* wake_up_sem_queue_do(pt) - do the actual wake-up
* @pt: list of tasks to be woken up
*
* Do the actual wake-up.
* The function is called without any locks held, thus the semaphore array
* could be destroyed already and the tasks can disappear as soon as the
* status is set to the actual return code.
*/
static void wake_up_sem_queue_do(struct list_head *pt)
{
struct sem_queue *q, *t;
int did_something;
did_something = !list_empty(pt);
list_for_each_entry_safe(q, t, pt, simple_list) {
wake_up_process(q->sleeper);
/* q can disappear immediately after writing q->status. */
smp_wmb();
q->status = q->pid;
}
if (did_something)
preempt_enable();
}
static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
{
list_del(&q->list);
if (q->nsops == 1)
list_del(&q->simple_list);
else
sma->complex_count--;
}
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
/** check_restart(sma, q)
* @sma: semaphore array
* @q: the operation that just completed
*
* update_queue is O(N^2) when it restarts scanning the whole queue of
* waiting operations. Therefore this function checks if the restart is
* really necessary. It is called after a previously waiting operation
* was completed.
*/
static int check_restart(struct sem_array *sma, struct sem_queue *q)
{
struct sem *curr;
struct sem_queue *h;
/* if the operation didn't modify the array, then no restart */
if (q->alter == 0)
return 0;
/* pending complex operations are too difficult to analyse */
if (sma->complex_count)
return 1;
/* we were a sleeping complex operation. Too difficult */
if (q->nsops > 1)
return 1;
curr = sma->sem_base + q->sops[0].sem_num;
/* No-one waits on this queue */
if (list_empty(&curr->sem_pending))
return 0;
/* the new semaphore value */
if (curr->semval) {
/* It is impossible that someone waits for the new value:
* - q is a previously sleeping simple operation that
* altered the array. It must be a decrement, because
* simple increments never sleep.
* - The value is not 0, thus wait-for-zero won't proceed.
* - If there are older (higher priority) decrements
* in the queue, then they have observed the original
* semval value and couldn't proceed. The operation
* decremented to value - thus they won't proceed either.
*/
BUG_ON(q->sops[0].sem_op >= 0);
return 0;
}
/*
* semval is 0. Check if there are wait-for-zero semops.
* They must be the first entries in the per-semaphore simple queue
*/
h = list_first_entry(&curr->sem_pending, struct sem_queue, simple_list);
BUG_ON(h->nsops != 1);
BUG_ON(h->sops[0].sem_num != q->sops[0].sem_num);
/* Yes, there is a wait-for-zero semop. Restart */
if (h->sops[0].sem_op == 0)
return 1;
/* Again - no-one is waiting for the new value. */
return 0;
}
/**
* update_queue(sma, semnum): Look for tasks that can be completed.
* @sma: semaphore array.
* @semnum: semaphore that was modified.
* @pt: list head for the tasks that must be woken up.
*
* update_queue must be called after a semaphore in a semaphore array
* was modified. If multiple semaphore were modified, then @semnum
* must be set to -1.
* The tasks that must be woken up are added to @pt. The return code
* is stored in q->pid.
* The function return 1 if at least one semop was completed successfully.
*/
static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt)
{
struct sem_queue *q;
struct list_head *walk;
struct list_head *pending_list;
int offset;
int semop_completed = 0;
/* if there are complex operations around, then knowing the semaphore
* that was modified doesn't help us. Assume that multiple semaphores
* were modified.
*/
if (sma->complex_count)
semnum = -1;
if (semnum == -1) {
pending_list = &sma->sem_pending;
offset = offsetof(struct sem_queue, list);
} else {
pending_list = &sma->sem_base[semnum].sem_pending;
offset = offsetof(struct sem_queue, simple_list);
}
again:
walk = pending_list->next;
while (walk != pending_list) {
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
int error, restart;
q = (struct sem_queue *)((char *)walk - offset);
walk = walk->next;
/* If we are scanning the single sop, per-semaphore list of
* one semaphore and that semaphore is 0, then it is not
* necessary to scan the "alter" entries: simple increments
* that affect only one entry succeed immediately and cannot
* be in the per semaphore pending queue, and decrements
* cannot be successful if the value is already 0.
*/
if (semnum != -1 && sma->sem_base[semnum].semval == 0 &&
q->alter)
break;
error = try_atomic_semop(sma, q->sops, q->nsops,
q->undo, q->pid);
/* Does q->sleeper still need to sleep? */
if (error > 0)
continue;
unlink_queue(sma, q);
if (error) {
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
restart = 0;
} else {
semop_completed = 1;
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
restart = check_restart(sma, q);
}
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
wake_up_sem_queue_prepare(pt, q, error);
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
if (restart)
goto again;
}
return semop_completed;
}
/**
* do_smart_update(sma, sops, nsops, otime, pt) - optimized update_queue
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
* @sma: semaphore array
* @sops: operations that were performed
* @nsops: number of operations
* @otime: force setting otime
* @pt: list head of the tasks that must be woken up.
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
*
* do_smart_update() does the required called to update_queue, based on the
* actual changes that were performed on the semaphore array.
* Note that the function does not do the actual wake-up: the caller is
* responsible for calling wake_up_sem_queue_do(@pt).
* It is safe to perform this call after dropping all locks.
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
*/
static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
int otime, struct list_head *pt)
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
{
int i;
if (sma->complex_count || sops == NULL) {
if (update_queue(sma, -1, pt))
otime = 1;
goto done;
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
}
for (i = 0; i < nsops; i++) {
if (sops[i].sem_op > 0 ||
(sops[i].sem_op < 0 &&
sma->sem_base[sops[i].sem_num].semval == 0))
if (update_queue(sma, sops[i].sem_num, pt))
otime = 1;
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
}
done:
if (otime)
sma->sem_otime = get_seconds();
ipc/sem.c: optimize update_queue() for bulk wakeup calls The following series of patches tries to fix the spinlock contention reported by Chris Mason - his benchmark exposes problems of the current code: - In the worst case, the algorithm used by update_queue() is O(N^2). Bulk wake-up calls can enter this worst case. The patch series fix that. Note that the benchmark app doesn't expose the problem, it just should be fixed: Real world apps might do the wake-ups in another order than perfect FIFO. - The part of the code that runs within the semaphore array spinlock is significantly larger than necessary. The patch series fixes that. This change is responsible for the main improvement. - The cacheline with the spinlock is also used for a variable that is read in the hot path (sem_base) and for a variable that is unnecessarily written to multiple times (sem_otime). The last step of the series cacheline-aligns the spinlock. This patch: The SysV semaphore code allows to perform multiple operations on all semaphores in the array as atomic operations. After a modification, update_queue() checks which of the waiting tasks can complete. The algorithm that is used to identify the tasks is O(N^2) in the worst case. For some cases, it is simple to avoid the O(N^2). The patch adds a detection logic for some cases, especially for the case of an array where all sleeping tasks are single sembuf operations and a multi-sembuf operation is used to wake up multiple tasks. A big database application uses that approach. The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of the patch breaks that. [akpm@linux-foundation.org: make do_smart_update() static] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 05:43:40 +08:00
}
/* The following counts are associated to each semaphore:
* semncnt number of tasks waiting on semval being nonzero
* semzcnt number of tasks waiting on semval being zero
* This model assumes that a task waits on exactly one semaphore.
* Since semaphore operations are to be performed atomically, tasks actually
* wait on a whole sequence of semaphores simultaneously.
* The counts we return here are a rough approximation, but still
* warrant that semncnt+semzcnt>0 if the task is on the pending queue.
*/
static int count_semncnt (struct sem_array * sma, ushort semnum)
{
int semncnt;
struct sem_queue * q;
semncnt = 0;
list_for_each_entry(q, &sma->sem_pending, list) {
struct sembuf * sops = q->sops;
int nsops = q->nsops;
int i;
for (i = 0; i < nsops; i++)
if (sops[i].sem_num == semnum
&& (sops[i].sem_op < 0)
&& !(sops[i].sem_flg & IPC_NOWAIT))
semncnt++;
}
return semncnt;
}
static int count_semzcnt (struct sem_array * sma, ushort semnum)
{
int semzcnt;
struct sem_queue * q;
semzcnt = 0;
list_for_each_entry(q, &sma->sem_pending, list) {
struct sembuf * sops = q->sops;
int nsops = q->nsops;
int i;
for (i = 0; i < nsops; i++)
if (sops[i].sem_num == semnum
&& (sops[i].sem_op == 0)
&& !(sops[i].sem_flg & IPC_NOWAIT))
semzcnt++;
}
return semzcnt;
}
/* Free a semaphore set. freeary() is called with sem_ids.rw_mutex locked
* as a writer and the spinlock for this semaphore set hold. sem_ids.rw_mutex
* remains locked on exit.
*/
static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
{
struct sem_undo *un, *tu;
struct sem_queue *q, *tq;
struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
struct list_head tasks;
/* Free the existing undo structures for this semaphore set. */
assert_spin_locked(&sma->sem_perm.lock);
list_for_each_entry_safe(un, tu, &sma->list_id, list_id) {
list_del(&un->list_id);
spin_lock(&un->ulp->lock);
un->semid = -1;
list_del_rcu(&un->list_proc);
spin_unlock(&un->ulp->lock);
kfree_rcu(un, rcu);
}
/* Wake up all pending processes and let them fail with EIDRM. */
INIT_LIST_HEAD(&tasks);
list_for_each_entry_safe(q, tq, &sma->sem_pending, list) {
unlink_queue(sma, q);
wake_up_sem_queue_prepare(&tasks, q, -EIDRM);
}
/* Remove the semaphore set from the IDR */
sem_rmid(ns, sma);
sem_unlock(sma);
wake_up_sem_queue_do(&tasks);
ns->used_sems -= sma->sem_nsems;
security_sem_free(sma);
ipc_rcu_putref(sma);
}
static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, int version)
{
switch(version) {
case IPC_64:
return copy_to_user(buf, in, sizeof(*in));
case IPC_OLD:
{
struct semid_ds out;
memset(&out, 0, sizeof(out));
ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
out.sem_otime = in->sem_otime;
out.sem_ctime = in->sem_ctime;
out.sem_nsems = in->sem_nsems;
return copy_to_user(buf, &out, sizeof(out));
}
default:
return -EINVAL;
}
}
static int semctl_nolock(struct ipc_namespace *ns, int semid,
int cmd, int version, union semun arg)
{
int err;
struct sem_array *sma;
switch(cmd) {
case IPC_INFO:
case SEM_INFO:
{
struct seminfo seminfo;
int max_id;
err = security_sem_semctl(NULL, cmd);
if (err)
return err;
memset(&seminfo,0,sizeof(seminfo));
seminfo.semmni = ns->sc_semmni;
seminfo.semmns = ns->sc_semmns;
seminfo.semmsl = ns->sc_semmsl;
seminfo.semopm = ns->sc_semopm;
seminfo.semvmx = SEMVMX;
seminfo.semmnu = SEMMNU;
seminfo.semmap = SEMMAP;
seminfo.semume = SEMUME;
down_read(&sem_ids(ns).rw_mutex);
if (cmd == SEM_INFO) {
seminfo.semusz = sem_ids(ns).in_use;
seminfo.semaem = ns->used_sems;
} else {
seminfo.semusz = SEMUSZ;
seminfo.semaem = SEMAEM;
}
max_id = ipc_get_maxid(&sem_ids(ns));
up_read(&sem_ids(ns).rw_mutex);
if (copy_to_user (arg.__buf, &seminfo, sizeof(struct seminfo)))
return -EFAULT;
return (max_id < 0) ? 0: max_id;
}
case IPC_STAT:
case SEM_STAT:
{
struct semid64_ds tbuf;
int id;
if (cmd == SEM_STAT) {
sma = sem_lock(ns, semid);
if (IS_ERR(sma))
return PTR_ERR(sma);
id = sma->sem_perm.id;
} else {
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma))
return PTR_ERR(sma);
id = 0;
}
err = -EACCES;
if (ipcperms(ns, &sma->sem_perm, S_IRUGO))
goto out_unlock;
err = security_sem_semctl(sma, cmd);
if (err)
goto out_unlock;
memset(&tbuf, 0, sizeof(tbuf));
kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm);
tbuf.sem_otime = sma->sem_otime;
tbuf.sem_ctime = sma->sem_ctime;
tbuf.sem_nsems = sma->sem_nsems;
sem_unlock(sma);
if (copy_semid_to_user (arg.buf, &tbuf, version))
return -EFAULT;
return id;
}
default:
return -EINVAL;
}
out_unlock:
sem_unlock(sma);
return err;
}
static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
int cmd, int version, union semun arg)
{
struct sem_array *sma;
struct sem* curr;
int err;
ushort fast_sem_io[SEMMSL_FAST];
ushort* sem_io = fast_sem_io;
int nsems;
struct list_head tasks;
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma))
return PTR_ERR(sma);
INIT_LIST_HEAD(&tasks);
nsems = sma->sem_nsems;
err = -EACCES;
if (ipcperms(ns, &sma->sem_perm,
(cmd == SETVAL || cmd == SETALL) ? S_IWUGO : S_IRUGO))
goto out_unlock;
err = security_sem_semctl(sma, cmd);
if (err)
goto out_unlock;
err = -EACCES;
switch (cmd) {
case GETALL:
{
ushort __user *array = arg.array;
int i;
if(nsems > SEMMSL_FAST) {
sem_getref_and_unlock(sma);
sem_io = ipc_alloc(sizeof(ushort)*nsems);
if(sem_io == NULL) {
sem_putref(sma);
return -ENOMEM;
}
sem_lock_and_putref(sma);
if (sma->sem_perm.deleted) {
sem_unlock(sma);
err = -EIDRM;
goto out_free;
}
}
for (i = 0; i < sma->sem_nsems; i++)
sem_io[i] = sma->sem_base[i].semval;
sem_unlock(sma);
err = 0;
if(copy_to_user(array, sem_io, nsems*sizeof(ushort)))
err = -EFAULT;
goto out_free;
}
case SETALL:
{
int i;
struct sem_undo *un;
sem_getref_and_unlock(sma);
if(nsems > SEMMSL_FAST) {
sem_io = ipc_alloc(sizeof(ushort)*nsems);
if(sem_io == NULL) {
sem_putref(sma);
return -ENOMEM;
}
}
if (copy_from_user (sem_io, arg.array, nsems*sizeof(ushort))) {
sem_putref(sma);
err = -EFAULT;
goto out_free;
}
for (i = 0; i < nsems; i++) {
if (sem_io[i] > SEMVMX) {
sem_putref(sma);
err = -ERANGE;
goto out_free;
}
}
sem_lock_and_putref(sma);
if (sma->sem_perm.deleted) {
sem_unlock(sma);
err = -EIDRM;
goto out_free;
}
for (i = 0; i < nsems; i++)
sma->sem_base[i].semval = sem_io[i];
assert_spin_locked(&sma->sem_perm.lock);
list_for_each_entry(un, &sma->list_id, list_id) {
for (i = 0; i < nsems; i++)
un->semadj[i] = 0;
}
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
do_smart_update(sma, NULL, 0, 0, &tasks);
err = 0;
goto out_unlock;
}
/* GETVAL, GETPID, GETNCTN, GETZCNT, SETVAL: fall-through */
}
err = -EINVAL;
if(semnum < 0 || semnum >= nsems)
goto out_unlock;
curr = &sma->sem_base[semnum];
switch (cmd) {
case GETVAL:
err = curr->semval;
goto out_unlock;
case GETPID:
err = curr->sempid;
goto out_unlock;
case GETNCNT:
err = count_semncnt(sma,semnum);
goto out_unlock;
case GETZCNT:
err = count_semzcnt(sma,semnum);
goto out_unlock;
case SETVAL:
{
int val = arg.val;
struct sem_undo *un;
err = -ERANGE;
if (val > SEMVMX || val < 0)
goto out_unlock;
assert_spin_locked(&sma->sem_perm.lock);
list_for_each_entry(un, &sma->list_id, list_id)
un->semadj[semnum] = 0;
curr->semval = val;
curr->sempid = task_tgid_vnr(current);
sma->sem_ctime = get_seconds();
/* maybe some queued-up processes were waiting for this */
do_smart_update(sma, NULL, 0, 0, &tasks);
err = 0;
goto out_unlock;
}
}
out_unlock:
sem_unlock(sma);
wake_up_sem_queue_do(&tasks);
out_free:
if(sem_io != fast_sem_io)
ipc_free(sem_io, sizeof(ushort)*nsems);
return err;
}
static inline unsigned long
copy_semid_from_user(struct semid64_ds *out, void __user *buf, int version)
{
switch(version) {
case IPC_64:
if (copy_from_user(out, buf, sizeof(*out)))
return -EFAULT;
return 0;
case IPC_OLD:
{
struct semid_ds tbuf_old;
if(copy_from_user(&tbuf_old, buf, sizeof(tbuf_old)))
return -EFAULT;
out->sem_perm.uid = tbuf_old.sem_perm.uid;
out->sem_perm.gid = tbuf_old.sem_perm.gid;
out->sem_perm.mode = tbuf_old.sem_perm.mode;
return 0;
}
default:
return -EINVAL;
}
}
/*
* This function handles some semctl commands which require the rw_mutex
* to be held in write mode.
* NOTE: no locks must be held, the rw_mutex is taken inside this function.
*/
static int semctl_down(struct ipc_namespace *ns, int semid,
int cmd, int version, union semun arg)
{
struct sem_array *sma;
int err;
struct semid64_ds semid64;
struct kern_ipc_perm *ipcp;
if(cmd == IPC_SET) {
if (copy_semid_from_user(&semid64, arg.buf, version))
return -EFAULT;
}
[PATCH] Rework of IPC auditing 1) The audit_ipc_perms() function has been split into two different functions: - audit_ipc_obj() - audit_ipc_set_perm() There's a key shift here... The audit_ipc_obj() collects the uid, gid, mode, and SElinux context label of the current ipc object. This audit_ipc_obj() hook is now found in several places. Most notably, it is hooked in ipcperms(), which is called in various places around the ipc code permforming a MAC check. Additionally there are several places where *checkid() is used to validate that an operation is being performed on a valid object while not necessarily having a nearby ipcperms() call. In these locations, audit_ipc_obj() is called to ensure that the information is captured by the audit system. The audit_set_new_perm() function is called any time the permissions on the ipc object changes. In this case, the NEW permissions are recorded (and note that an audit_ipc_obj() call exists just a few lines before each instance). 2) Support for an AUDIT_IPC_SET_PERM audit message type. This allows for separate auxiliary audit records for normal operations on an IPC object and permissions changes. Note that the same struct audit_aux_data_ipcctl is used and populated, however there are separate audit_log_format statements based on the type of the message. Finally, the AUDIT_IPC block of code in audit_free_aux() was extended to handle aux messages of this new type. No more mem leaks I hope ;-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-04-03 05:07:33 +08:00
ipcp = ipcctl_pre_down(ns, &sem_ids(ns), semid, cmd,
&semid64.sem_perm, 0);
if (IS_ERR(ipcp))
return PTR_ERR(ipcp);
[PATCH] Rework of IPC auditing 1) The audit_ipc_perms() function has been split into two different functions: - audit_ipc_obj() - audit_ipc_set_perm() There's a key shift here... The audit_ipc_obj() collects the uid, gid, mode, and SElinux context label of the current ipc object. This audit_ipc_obj() hook is now found in several places. Most notably, it is hooked in ipcperms(), which is called in various places around the ipc code permforming a MAC check. Additionally there are several places where *checkid() is used to validate that an operation is being performed on a valid object while not necessarily having a nearby ipcperms() call. In these locations, audit_ipc_obj() is called to ensure that the information is captured by the audit system. The audit_set_new_perm() function is called any time the permissions on the ipc object changes. In this case, the NEW permissions are recorded (and note that an audit_ipc_obj() call exists just a few lines before each instance). 2) Support for an AUDIT_IPC_SET_PERM audit message type. This allows for separate auxiliary audit records for normal operations on an IPC object and permissions changes. Note that the same struct audit_aux_data_ipcctl is used and populated, however there are separate audit_log_format statements based on the type of the message. Finally, the AUDIT_IPC block of code in audit_free_aux() was extended to handle aux messages of this new type. No more mem leaks I hope ;-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-04-03 05:07:33 +08:00
sma = container_of(ipcp, struct sem_array, sem_perm);
err = security_sem_semctl(sma, cmd);
if (err)
goto out_unlock;
switch(cmd){
case IPC_RMID:
freeary(ns, ipcp);
goto out_up;
case IPC_SET:
ipc_update_perm(&semid64.sem_perm, ipcp);
sma->sem_ctime = get_seconds();
break;
default:
err = -EINVAL;
}
out_unlock:
sem_unlock(sma);
out_up:
up_write(&sem_ids(ns).rw_mutex);
return err;
}
SYSCALL_DEFINE(semctl)(int semid, int semnum, int cmd, union semun arg)
{
int err = -EINVAL;
int version;
struct ipc_namespace *ns;
if (semid < 0)
return -EINVAL;
version = ipc_parse_version(&cmd);
ns = current->nsproxy->ipc_ns;
switch(cmd) {
case IPC_INFO:
case SEM_INFO:
case IPC_STAT:
case SEM_STAT:
err = semctl_nolock(ns, semid, cmd, version, arg);
return err;
case GETALL:
case GETVAL:
case GETPID:
case GETNCNT:
case GETZCNT:
case SETVAL:
case SETALL:
err = semctl_main(ns,semid,semnum,cmd,version,arg);
return err;
case IPC_RMID:
case IPC_SET:
err = semctl_down(ns, semid, cmd, version, arg);
return err;
default:
return -EINVAL;
}
}
#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
asmlinkage long SyS_semctl(int semid, int semnum, int cmd, union semun arg)
{
return SYSC_semctl((int) semid, (int) semnum, (int) cmd, arg);
}
SYSCALL_ALIAS(sys_semctl, SyS_semctl);
#endif
/* If the task doesn't already have a undo_list, then allocate one
* here. We guarantee there is only one thread using this undo list,
* and current is THE ONE
*
* If this allocation and assignment succeeds, but later
* portions of this code fail, there is no need to free the sem_undo_list.
* Just let it stay associated with the task, and it'll be freed later
* at exit time.
*
* This can block, so callers must hold no locks.
*/
static inline int get_undo_list(struct sem_undo_list **undo_listp)
{
struct sem_undo_list *undo_list;
undo_list = current->sysvsem.undo_list;
if (!undo_list) {
undo_list = kzalloc(sizeof(*undo_list), GFP_KERNEL);
if (undo_list == NULL)
return -ENOMEM;
spin_lock_init(&undo_list->lock);
atomic_set(&undo_list->refcnt, 1);
INIT_LIST_HEAD(&undo_list->list_proc);
current->sysvsem.undo_list = undo_list;
}
*undo_listp = undo_list;
return 0;
}
static struct sem_undo *__lookup_undo(struct sem_undo_list *ulp, int semid)
{
struct sem_undo *un;
list_for_each_entry_rcu(un, &ulp->list_proc, list_proc) {
if (un->semid == semid)
return un;
}
return NULL;
}
static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
{
struct sem_undo *un;
assert_spin_locked(&ulp->lock);
un = __lookup_undo(ulp, semid);
if (un) {
list_del_rcu(&un->list_proc);
list_add_rcu(&un->list_proc, &ulp->list_proc);
}
return un;
}
/**
* find_alloc_undo - Lookup (and if not present create) undo array
* @ns: namespace
* @semid: semaphore array id
*
* The function looks up (and if not present creates) the undo structure.
* The size of the undo structure depends on the size of the semaphore
* array, thus the alloc path is not that straightforward.
* Lifetime-rules: sem_undo is rcu-protected, on success, the function
* performs a rcu_read_lock().
*/
static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
{
struct sem_array *sma;
struct sem_undo_list *ulp;
struct sem_undo *un, *new;
int nsems;
int error;
error = get_undo_list(&ulp);
if (error)
return ERR_PTR(error);
rcu_read_lock();
spin_lock(&ulp->lock);
un = lookup_undo(ulp, semid);
spin_unlock(&ulp->lock);
if (likely(un!=NULL))
goto out;
rcu_read_unlock();
/* no undo structure around - allocate one. */
/* step 1: figure out the size of the semaphore array */
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma))
return ERR_CAST(sma);
nsems = sma->sem_nsems;
sem_getref_and_unlock(sma);
/* step 2: allocate new undo structure */
new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
if (!new) {
sem_putref(sma);
return ERR_PTR(-ENOMEM);
}
/* step 3: Acquire the lock on semaphore array */
sem_lock_and_putref(sma);
if (sma->sem_perm.deleted) {
sem_unlock(sma);
kfree(new);
un = ERR_PTR(-EIDRM);
goto out;
}
spin_lock(&ulp->lock);
/*
* step 4: check for races: did someone else allocate the undo struct?
*/
un = lookup_undo(ulp, semid);
if (un) {
kfree(new);
goto success;
}
/* step 5: initialize & link new undo structure */
new->semadj = (short *) &new[1];
new->ulp = ulp;
new->semid = semid;
assert_spin_locked(&ulp->lock);
list_add_rcu(&new->list_proc, &ulp->list_proc);
assert_spin_locked(&sma->sem_perm.lock);
list_add(&new->list_id, &sma->list_id);
un = new;
success:
spin_unlock(&ulp->lock);
rcu_read_lock();
sem_unlock(sma);
out:
return un;
}
/**
* get_queue_result - Retrieve the result code from sem_queue
* @q: Pointer to queue structure
*
* Retrieve the return code from the pending queue. If IN_WAKEUP is found in
* q->status, then we must loop until the value is replaced with the final
* value: This may happen if a task is woken up by an unrelated event (e.g.
* signal) and in parallel the task is woken up by another task because it got
* the requested semaphores.
*
* The function can be called with or without holding the semaphore spinlock.
*/
static int get_queue_result(struct sem_queue *q)
{
int error;
error = q->status;
while (unlikely(error == IN_WAKEUP)) {
cpu_relax();
error = q->status;
}
return error;
}
SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops, const struct timespec __user *, timeout)
{
int error = -EINVAL;
struct sem_array *sma;
struct sembuf fast_sops[SEMOPM_FAST];
struct sembuf* sops = fast_sops, *sop;
struct sem_undo *un;
int undos = 0, alter = 0, max;
struct sem_queue queue;
unsigned long jiffies_left = 0;
struct ipc_namespace *ns;
struct list_head tasks;
ns = current->nsproxy->ipc_ns;
if (nsops < 1 || semid < 0)
return -EINVAL;
if (nsops > ns->sc_semopm)
return -E2BIG;
if(nsops > SEMOPM_FAST) {
sops = kmalloc(sizeof(*sops)*nsops,GFP_KERNEL);
if(sops==NULL)
return -ENOMEM;
}
if (copy_from_user (sops, tsops, nsops * sizeof(*tsops))) {
error=-EFAULT;
goto out_free;
}
if (timeout) {
struct timespec _timeout;
if (copy_from_user(&_timeout, timeout, sizeof(*timeout))) {
error = -EFAULT;
goto out_free;
}
if (_timeout.tv_sec < 0 || _timeout.tv_nsec < 0 ||
_timeout.tv_nsec >= 1000000000L) {
error = -EINVAL;
goto out_free;
}
jiffies_left = timespec_to_jiffies(&_timeout);
}
max = 0;
for (sop = sops; sop < sops + nsops; sop++) {
if (sop->sem_num >= max)
max = sop->sem_num;
if (sop->sem_flg & SEM_UNDO)
undos = 1;
if (sop->sem_op != 0)
alter = 1;
}
if (undos) {
un = find_alloc_undo(ns, semid);
if (IS_ERR(un)) {
error = PTR_ERR(un);
goto out_free;
}
} else
un = NULL;
INIT_LIST_HEAD(&tasks);
sma = sem_lock_check(ns, semid);
if (IS_ERR(sma)) {
if (un)
rcu_read_unlock();
error = PTR_ERR(sma);
goto out_free;
}
/*
* semid identifiers are not unique - find_alloc_undo may have
* allocated an undo structure, it was invalidated by an RMID
* and now a new array with received the same id. Check and fail.
* This case can be detected checking un->semid. The existence of
* "un" itself is guaranteed by rcu.
*/
error = -EIDRM;
if (un) {
if (un->semid == -1) {
rcu_read_unlock();
goto out_unlock_free;
} else {
/*
* rcu lock can be released, "un" cannot disappear:
* - sem_lock is acquired, thus IPC_RMID is
* impossible.
* - exit_sem is impossible, it always operates on
* current (or a dead task).
*/
rcu_read_unlock();
}
}
error = -EFBIG;
if (max >= sma->sem_nsems)
goto out_unlock_free;
error = -EACCES;
if (ipcperms(ns, &sma->sem_perm, alter ? S_IWUGO : S_IRUGO))
goto out_unlock_free;
error = security_sem_semop(sma, sops, nsops, alter);
if (error)
goto out_unlock_free;
error = try_atomic_semop (sma, sops, nsops, un, task_tgid_vnr(current));
if (error <= 0) {
if (alter && error == 0)
do_smart_update(sma, sops, nsops, 1, &tasks);
goto out_unlock_free;
}
/* We need to sleep on this operation, so we put the current
* task into the pending queue and go to sleep.
*/
queue.sops = sops;
queue.nsops = nsops;
queue.undo = un;
queue.pid = task_tgid_vnr(current);
queue.alter = alter;
if (alter)
list_add_tail(&queue.list, &sma->sem_pending);
else
list_add(&queue.list, &sma->sem_pending);
if (nsops == 1) {
struct sem *curr;
curr = &sma->sem_base[sops->sem_num];
if (alter)
list_add_tail(&queue.simple_list, &curr->sem_pending);
else
list_add(&queue.simple_list, &curr->sem_pending);
} else {
INIT_LIST_HEAD(&queue.simple_list);
sma->complex_count++;
}
queue.status = -EINTR;
queue.sleeper = current;
current->state = TASK_INTERRUPTIBLE;
sem_unlock(sma);
if (timeout)
jiffies_left = schedule_timeout(jiffies_left);
else
schedule();
error = get_queue_result(&queue);
if (error != -EINTR) {
/* fast path: update_queue already obtained all requested
* resources.
* Perform a smp_mb(): User space could assume that semop()
* is a memory barrier: Without the mb(), the cpu could
* speculatively read in user space stale data that was
* overwritten by the previous owner of the semaphore.
*/
smp_mb();
goto out_free;
}
sma = sem_lock(ns, semid);
/*
* Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing.
*/
error = get_queue_result(&queue);
/*
* Array removed? If yes, leave without sem_unlock().
*/
if (IS_ERR(sma)) {
error = -EIDRM;
goto out_free;
}
/*
* If queue.status != -EINTR we are woken up by another process.
* Leave without unlink_queue(), but with sem_unlock().
*/
if (error != -EINTR) {
goto out_unlock_free;
}
/*
* If an interrupt occurred we have to clean up the queue
*/
if (timeout && jiffies_left == 0)
error = -EAGAIN;
unlink_queue(sma, &queue);
out_unlock_free:
sem_unlock(sma);
wake_up_sem_queue_do(&tasks);
out_free:
if(sops != fast_sops)
kfree(sops);
return error;
}
SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
unsigned, nsops)
{
return sys_semtimedop(semid, tsops, nsops, NULL);
}
/* If CLONE_SYSVSEM is set, establish sharing of SEM_UNDO state between
* parent and child tasks.
*/
int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
{
struct sem_undo_list *undo_list;
int error;
if (clone_flags & CLONE_SYSVSEM) {
error = get_undo_list(&undo_list);
if (error)
return error;
atomic_inc(&undo_list->refcnt);
tsk->sysvsem.undo_list = undo_list;
} else
tsk->sysvsem.undo_list = NULL;
return 0;
}
/*
* add semadj values to semaphores, free undo structures.
* undo structures are not freed when semaphore arrays are destroyed
* so some of them may be out of date.
* IMPLEMENTATION NOTE: There is some confusion over whether the
* set of adjustments that needs to be done should be done in an atomic
* manner or not. That is, if we are attempting to decrement the semval
* should we queue up and wait until we can do so legally?
* The original implementation attempted to do this (queue and wait).
* The current implementation does not do so. The POSIX standard
* and SVID should be consulted to determine what behavior is mandated.
*/
void exit_sem(struct task_struct *tsk)
{
struct sem_undo_list *ulp;
ulp = tsk->sysvsem.undo_list;
if (!ulp)
return;
tsk->sysvsem.undo_list = NULL;
if (!atomic_dec_and_test(&ulp->refcnt))
return;
for (;;) {
struct sem_array *sma;
struct sem_undo *un;
struct list_head tasks;
int semid;
int i;
rcu_read_lock();
un = list_entry_rcu(ulp->list_proc.next,
struct sem_undo, list_proc);
if (&un->list_proc == &ulp->list_proc)
semid = -1;
else
semid = un->semid;
rcu_read_unlock();
if (semid == -1)
break;
sma = sem_lock_check(tsk->nsproxy->ipc_ns, un->semid);
/* exit_sem raced with IPC_RMID, nothing to do */
if (IS_ERR(sma))
continue;
un = __lookup_undo(ulp, semid);
if (un == NULL) {
/* exit_sem raced with IPC_RMID+semget() that created
* exactly the same semid. Nothing to do.
*/
sem_unlock(sma);
continue;
}
/* remove un from the linked lists */
assert_spin_locked(&sma->sem_perm.lock);
list_del(&un->list_id);
spin_lock(&ulp->lock);
list_del_rcu(&un->list_proc);
spin_unlock(&ulp->lock);
/* perform adjustments registered in un */
for (i = 0; i < sma->sem_nsems; i++) {
struct sem * semaphore = &sma->sem_base[i];
if (un->semadj[i]) {
semaphore->semval += un->semadj[i];
/*
* Range checks of the new semaphore value,
* not defined by sus:
* - Some unices ignore the undo entirely
* (e.g. HP UX 11i 11.22, Tru64 V5.1)
* - some cap the value (e.g. FreeBSD caps
* at 0, but doesn't enforce SEMVMX)
*
* Linux caps the semaphore value, both at 0
* and at SEMVMX.
*
* Manfred <manfred@colorfullife.com>
*/
if (semaphore->semval < 0)
semaphore->semval = 0;
if (semaphore->semval > SEMVMX)
semaphore->semval = SEMVMX;
semaphore->sempid = task_tgid_vnr(current);
}
}
/* maybe some queued-up processes were waiting for this */
INIT_LIST_HEAD(&tasks);
do_smart_update(sma, NULL, 0, 1, &tasks);
sem_unlock(sma);
wake_up_sem_queue_do(&tasks);
kfree_rcu(un, rcu);
}
kfree(ulp);
}
#ifdef CONFIG_PROC_FS
static int sysvipc_sem_proc_show(struct seq_file *s, void *it)
{
struct sem_array *sma = it;
return seq_printf(s,
"%10d %10d %4o %10u %5u %5u %5u %5u %10lu %10lu\n",
sma->sem_perm.key,
sma->sem_perm.id,
sma->sem_perm.mode,
sma->sem_nsems,
sma->sem_perm.uid,
sma->sem_perm.gid,
sma->sem_perm.cuid,
sma->sem_perm.cgid,
sma->sem_otime,
sma->sem_ctime);
}
#endif