linux-sg2042/mm/swap_slots.c

353 lines
9.1 KiB
C
Raw Normal View History

mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
/*
* Manage cache of swap slots to be used for and returned from
* swap.
*
* Copyright(c) 2016 Intel Corporation.
*
* Author: Tim Chen <tim.c.chen@linux.intel.com>
*
* We allocate the swap slots from the global pool and put
* it into local per cpu caches. This has the advantage
* of no needing to acquire the swap_info lock every time
* we need a new slot.
*
* There is also opportunity to simply return the slot
* to local caches without needing to acquire swap_info
* lock. We do not reuse the returned slots directly but
* move them back to the global pool in a batch. This
* allows the slots to coaellesce and reduce fragmentation.
*
* The swap entry allocated is marked with SWAP_HAS_CACHE
* flag in map_count that prevents it from being allocated
* again from the global pool.
*
* The swap slots cache is protected by a mutex instead of
* a spin lock as when we search for slots with scan_swap_map,
* we can possibly sleep.
*/
#include <linux/swap_slots.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
#include <linux/mm.h>
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
#ifdef CONFIG_SWAP
static DEFINE_PER_CPU(struct swap_slots_cache, swp_slots);
static bool swap_slot_cache_active;
mm/swap: skip readahead only when swap slot cache is enabled Because during swap off, a swap entry may have swap_map[] == SWAP_HAS_CACHE (for example, just allocated). If we return NULL in __read_swap_cache_async(), the swap off will abort. So when swap slot cache is disabled, (for swap off), we will wait for page to be put into swap cache in such race condition. This should not be a problem for swap slot cache, because swap slot cache should be drained after clearing swap_slot_cache_enabled. [ying.huang@intel.com: fix memory leak in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/874lzt6znd.fsf@yhuang-dev.intel.com Link: http://lkml.kernel.org/r/5e2c5f6abe8e6eb0797408897b1bba80938e9b9d.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:46 +08:00
bool swap_slot_cache_enabled;
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
static bool swap_slot_cache_initialized;
DEFINE_MUTEX(swap_slots_cache_mutex);
/* Serialize swap slots cache enable/disable operations */
DEFINE_MUTEX(swap_slots_cache_enable_mutex);
static void __drain_swap_slots_cache(unsigned int type);
static void deactivate_swap_slots_cache(void);
static void reactivate_swap_slots_cache(void);
#define use_swap_slot_cache (swap_slot_cache_active && \
swap_slot_cache_enabled && swap_slot_cache_initialized)
#define SLOTS_CACHE 0x1
#define SLOTS_CACHE_RET 0x2
static void deactivate_swap_slots_cache(void)
{
mutex_lock(&swap_slots_cache_mutex);
swap_slot_cache_active = false;
__drain_swap_slots_cache(SLOTS_CACHE|SLOTS_CACHE_RET);
mutex_unlock(&swap_slots_cache_mutex);
}
static void reactivate_swap_slots_cache(void)
{
mutex_lock(&swap_slots_cache_mutex);
swap_slot_cache_active = true;
mutex_unlock(&swap_slots_cache_mutex);
}
/* Must not be called with cpu hot plug lock */
void disable_swap_slots_cache_lock(void)
{
mutex_lock(&swap_slots_cache_enable_mutex);
swap_slot_cache_enabled = false;
if (swap_slot_cache_initialized) {
/* serialize with cpu hotplug operations */
get_online_cpus();
__drain_swap_slots_cache(SLOTS_CACHE|SLOTS_CACHE_RET);
put_online_cpus();
}
}
static void __reenable_swap_slots_cache(void)
{
swap_slot_cache_enabled = has_usable_swap();
}
void reenable_swap_slots_cache_unlock(void)
{
__reenable_swap_slots_cache();
mutex_unlock(&swap_slots_cache_enable_mutex);
}
static bool check_cache_active(void)
{
long pages;
if (!swap_slot_cache_enabled || !swap_slot_cache_initialized)
return false;
pages = get_nr_swap_pages();
if (!swap_slot_cache_active) {
if (pages > num_online_cpus() *
THRESHOLD_ACTIVATE_SWAP_SLOTS_CACHE)
reactivate_swap_slots_cache();
goto out;
}
/* if global pool of slot caches too low, deactivate cache */
if (pages < num_online_cpus() * THRESHOLD_DEACTIVATE_SWAP_SLOTS_CACHE)
deactivate_swap_slots_cache();
out:
return swap_slot_cache_active;
}
static int alloc_swap_slot_cache(unsigned int cpu)
{
struct swap_slots_cache *cache;
swp_entry_t *slots, *slots_ret;
/*
* Do allocation outside swap_slots_cache_mutex
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
* as kvzalloc could trigger reclaim and get_swap_page,
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
* which can lock swap_slots_cache_mutex.
*/
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
slots = kvzalloc(sizeof(swp_entry_t) * SWAP_SLOTS_CACHE_SIZE,
GFP_KERNEL);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
if (!slots)
return -ENOMEM;
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
slots_ret = kvzalloc(sizeof(swp_entry_t) * SWAP_SLOTS_CACHE_SIZE,
GFP_KERNEL);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
if (!slots_ret) {
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
kvfree(slots);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
return -ENOMEM;
}
mutex_lock(&swap_slots_cache_mutex);
cache = &per_cpu(swp_slots, cpu);
if (cache->slots || cache->slots_ret)
/* cache already allocated */
goto out;
if (!cache->lock_initialized) {
mutex_init(&cache->alloc_lock);
spin_lock_init(&cache->free_lock);
cache->lock_initialized = true;
}
cache->nr = 0;
cache->cur = 0;
cache->n_ret = 0;
cache->slots = slots;
slots = NULL;
cache->slots_ret = slots_ret;
slots_ret = NULL;
out:
mutex_unlock(&swap_slots_cache_mutex);
if (slots)
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
kvfree(slots);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
if (slots_ret)
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
kvfree(slots_ret);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
return 0;
}
static void drain_slots_cache_cpu(unsigned int cpu, unsigned int type,
bool free_slots)
{
struct swap_slots_cache *cache;
swp_entry_t *slots = NULL;
cache = &per_cpu(swp_slots, cpu);
if ((type & SLOTS_CACHE) && cache->slots) {
mutex_lock(&cache->alloc_lock);
swapcache_free_entries(cache->slots + cache->cur, cache->nr);
cache->cur = 0;
cache->nr = 0;
if (free_slots && cache->slots) {
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
kvfree(cache->slots);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
cache->slots = NULL;
}
mutex_unlock(&cache->alloc_lock);
}
if ((type & SLOTS_CACHE_RET) && cache->slots_ret) {
spin_lock_irq(&cache->free_lock);
swapcache_free_entries(cache->slots_ret, cache->n_ret);
cache->n_ret = 0;
if (free_slots && cache->slots_ret) {
slots = cache->slots_ret;
cache->slots_ret = NULL;
}
spin_unlock_irq(&cache->free_lock);
if (slots)
mm, swap: use kvzalloc to allocate some swap data structures Now vzalloc() is used in swap code to allocate various data structures, such as swap cache, swap slots cache, cluster info, etc. Because the size may be too large on some system, so that normal kzalloc() may fail. But using kzalloc() has some advantages, for example, less memory fragmentation, less TLB pressure, etc. So change the data structure allocation in swap code to use kvzalloc() which will try kzalloc() firstly, and fallback to vzalloc() if kzalloc() failed. In general, although kmalloc() will reduce the number of high-order pages in short term, vmalloc() will cause more pain for memory fragmentation in the long term. And the swap data structure allocation that is changed in this patch is expected to be long term allocation. From Dave Hansen: "for example, we have a two-page data structure. vmalloc() takes two effectively random order-0 pages, probably from two different 2M pages and pins them. That "kills" two 2M pages. kmalloc(), allocating two *contiguous* pages, will not cross a 2M boundary. That means it will only "kill" the possibility of a single 2M page. More 2M pages == less fragmentation. The allocation in this patch occurs during swap on time, which is usually done during system boot, so usually we have high opportunity to allocate the contiguous pages successfully. The allocation for swap_map[] in struct swap_info_struct is not changed, because that is usually quite large and vmalloc_to_page() is used for it. That makes it a little harder to change. Link: http://lkml.kernel.org/r/20170407064911.25447-1-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Tim Chen <tim.c.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:40 +08:00
kvfree(slots);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
}
}
static void __drain_swap_slots_cache(unsigned int type)
{
unsigned int cpu;
/*
* This function is called during
* 1) swapoff, when we have to make sure no
* left over slots are in cache when we remove
* a swap device;
* 2) disabling of swap slot cache, when we run low
* on swap slots when allocating memory and need
* to return swap slots to global pool.
*
* We cannot acquire cpu hot plug lock here as
* this function can be invoked in the cpu
* hot plug path:
* cpu_up -> lock cpu_hotplug -> cpu hotplug state callback
* -> memory allocation -> direct reclaim -> get_swap_page
* -> drain_swap_slots_cache
*
* Hence the loop over current online cpu below could miss cpu that
* is being brought online but not yet marked as online.
* That is okay as we do not schedule and run anything on a
* cpu before it has been marked online. Hence, we will not
* fill any swap slots in slots cache of such cpu.
* There are no slots on such cpu that need to be drained.
*/
for_each_online_cpu(cpu)
drain_slots_cache_cpu(cpu, type, false);
}
static int free_slot_cache(unsigned int cpu)
{
mutex_lock(&swap_slots_cache_mutex);
drain_slots_cache_cpu(cpu, SLOTS_CACHE | SLOTS_CACHE_RET, true);
mutex_unlock(&swap_slots_cache_mutex);
return 0;
}
int enable_swap_slots_cache(void)
{
int ret = 0;
mutex_lock(&swap_slots_cache_enable_mutex);
if (swap_slot_cache_initialized) {
__reenable_swap_slots_cache();
goto out_unlock;
}
ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "swap_slots_cache",
alloc_swap_slot_cache, free_slot_cache);
if (WARN_ONCE(ret < 0, "Cache allocation failed (%s), operating "
"without swap slots cache.\n", __func__))
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
goto out_unlock;
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
swap_slot_cache_initialized = true;
__reenable_swap_slots_cache();
out_unlock:
mutex_unlock(&swap_slots_cache_enable_mutex);
return 0;
}
/* called with swap slot cache's alloc lock held */
static int refill_swap_slots_cache(struct swap_slots_cache *cache)
{
if (!use_swap_slot_cache || cache->nr)
return 0;
cache->cur = 0;
if (swap_slot_cache_active)
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:37:18 +08:00
cache->nr = get_swap_pages(SWAP_SLOTS_CACHE_SIZE, false,
cache->slots);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
return cache->nr;
}
int free_swap_slot(swp_entry_t entry)
{
struct swap_slots_cache *cache;
cache = raw_cpu_ptr(&swp_slots);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
if (use_swap_slot_cache && cache->slots_ret) {
spin_lock_irq(&cache->free_lock);
/* Swap slots cache may be deactivated before acquiring lock */
if (!use_swap_slot_cache || !cache->slots_ret) {
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
spin_unlock_irq(&cache->free_lock);
goto direct_free;
}
if (cache->n_ret >= SWAP_SLOTS_CACHE_SIZE) {
/*
* Return slots to global pool.
* The current swap_map value is SWAP_HAS_CACHE.
* Set it to 0 to indicate it is available for
* allocation in global pool
*/
swapcache_free_entries(cache->slots_ret, cache->n_ret);
cache->n_ret = 0;
}
cache->slots_ret[cache->n_ret++] = entry;
spin_unlock_irq(&cache->free_lock);
} else {
direct_free:
swapcache_free_entries(&entry, 1);
}
return 0;
}
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:37:18 +08:00
swp_entry_t get_swap_page(struct page *page)
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
{
swp_entry_t entry, *pentry;
struct swap_slots_cache *cache;
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:37:18 +08:00
entry.val = 0;
if (PageTransHuge(page)) {
if (IS_ENABLED(CONFIG_THP_SWAP))
get_swap_pages(1, true, &entry);
return entry;
}
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
/*
* Preemption is allowed here, because we may sleep
* in refill_swap_slots_cache(). But it is safe, because
* accesses to the per-CPU data structure are protected by the
* mutex cache->alloc_lock.
*
* The alloc path here does not touch cache->slots_ret
* so cache->free_lock is not taken.
*/
cache = raw_cpu_ptr(&swp_slots);
if (check_cache_active()) {
mutex_lock(&cache->alloc_lock);
if (cache->slots) {
repeat:
if (cache->nr) {
pentry = &cache->slots[cache->cur++];
entry = *pentry;
pentry->val = 0;
cache->nr--;
} else {
if (refill_swap_slots_cache(cache))
goto repeat;
}
}
mutex_unlock(&cache->alloc_lock);
if (entry.val)
return entry;
}
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:37:18 +08:00
get_swap_pages(1, false, &entry);
mm/swap: add cache for swap slots allocation We add per cpu caches for swap slots that can be allocated and freed quickly without the need to touch the swap info lock. Two separate caches are maintained for swap slots allocated and swap slots returned. This is to allow the swap slots to be returned to the global pool in a batch so they will have a chance to be coaelesced with other slots in a cluster. We do not reuse the slots that are returned right away, as it may increase fragmentation of the slots. The swap allocation cache is protected by a mutex as we may sleep when searching for empty slots in cache. The swap free cache is protected by a spin lock as we cannot sleep in the free path. We refill the swap slots cache when we run out of slots, and we disable the swap slots cache and drain the slots if the global number of slots fall below a low watermark threshold. We re-enable the cache agian when the slots available are above a high watermark. [ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access] [tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h] Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.com Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> escreveu: Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 07:45:39 +08:00
return entry;
}
#endif /* CONFIG_SWAP */