linux-sg2042/include/net/ip6_fib.h

313 lines
7.1 KiB
C
Raw Normal View History

/*
* Linux INET6 implementation
*
* Authors:
* Pedro Roque <roque@di.fc.ul.pt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _IP6_FIB_H
#define _IP6_FIB_H
#include <linux/ipv6_route.h>
#include <linux/rtnetlink.h>
#include <linux/spinlock.h>
#include <net/dst.h>
#include <net/flow.h>
#include <net/netlink.h>
#include <net/inetpeer.h>
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
#define FIB6_TABLE_HASHSZ 256
#else
#define FIB6_TABLE_HASHSZ 1
#endif
struct rt6_info;
struct fib6_config {
u32 fc_table;
u32 fc_metric;
int fc_dst_len;
int fc_src_len;
int fc_ifindex;
u32 fc_flags;
u32 fc_protocol;
u32 fc_type; /* only 8 bits are used */
struct in6_addr fc_dst;
struct in6_addr fc_src;
struct in6_addr fc_prefsrc;
struct in6_addr fc_gateway;
unsigned long fc_expires;
struct nlattr *fc_mx;
int fc_mx_len;
int fc_mp_len;
struct nlattr *fc_mp;
struct nl_info fc_nlinfo;
};
struct fib6_node {
struct fib6_node *parent;
struct fib6_node *left;
struct fib6_node *right;
#ifdef CONFIG_IPV6_SUBTREES
struct fib6_node *subtree;
#endif
struct rt6_info *leaf;
__u16 fn_bit; /* bit key */
__u16 fn_flags;
__u32 fn_sernum;
[IPV6]: Fix routing round-robin locking. As per RFC2461, section 6.3.6, item #2, when no routers on the matching list are known to be reachable or probably reachable we do round robin on those available routes so that we make sure to probe as many of them as possible to detect when one becomes reachable faster. Each routing table has a rwlock protecting the tree and the linked list of routes at each leaf. The round robin code executes during lookup and thus with the rwlock taken as a reader. A small local spinlock tries to provide protection but this does not work at all for two reasons: 1) The round-robin list manipulation, as coded, goes like this (with read lock held): walk routes finding head and tail spin_lock(); rotate list using head and tail spin_unlock(); While one thread is rotating the list, another thread can end up with stale values of head and tail and then proceed to corrupt the list when it gets the lock. This ends up causing the OOPS in fib6_add() later onthat many people have been hitting. 2) All the other code paths that run with the rwlock held as a reader do not expect the list to change on them, they expect it to remain completely fixed while they hold the lock in that way. So, simply stated, it is impossible to implement this correctly using a manipulation of the list without violating the rwlock locking semantics. Reimplement using a per-fib6_node round-robin pointer. This way we don't need to manipulate the list at all, and since the round-robin pointer can only ever point to real existing entries we don't need to perform any locking on the changing of the round-robin pointer itself. We only need to reset the round-robin pointer to NULL when the entry it is pointing to is removed. The idea is from Thomas Graf and it is very similar to how this was implemented before the advanced router selection code when in. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 11:36:25 +08:00
struct rt6_info *rr_ptr;
};
#ifndef CONFIG_IPV6_SUBTREES
#define FIB6_SUBTREE(fn) NULL
#else
#define FIB6_SUBTREE(fn) ((fn)->subtree)
#endif
/*
* routing information
*
*/
struct rt6key {
struct in6_addr addr;
int plen;
};
struct fib6_table;
struct rt6_info {
struct dst_entry dst;
/*
* Tail elements of dst_entry (__refcnt etc.)
* and these elements (rarely used in hot path) are in
* the same cache line.
*/
struct fib6_table *rt6i_table;
struct fib6_node *rt6i_node;
struct in6_addr rt6i_gateway;
/* Multipath routes:
* siblings is a list of rt6_info that have the the same metric/weight,
* destination, but not the same gateway. nsiblings is just a cache
* to speed up lookup.
*/
struct list_head rt6i_siblings;
unsigned int rt6i_nsiblings;
atomic_t rt6i_ref;
/* These are in a separate cache line. */
struct rt6key rt6i_dst ____cacheline_aligned_in_smp;
u32 rt6i_flags;
struct rt6key rt6i_src;
struct rt6key rt6i_prefsrc;
struct inet6_dev *rt6i_idev;
unsigned long _rt6i_peer;
u32 rt6i_metric;
/* more non-fragment space at head required */
unsigned short rt6i_nfheader_len;
u8 rt6i_protocol;
};
static inline struct inet_peer *rt6_peer_ptr(struct rt6_info *rt)
{
return inetpeer_ptr(rt->_rt6i_peer);
}
static inline bool rt6_has_peer(struct rt6_info *rt)
{
return inetpeer_ptr_is_peer(rt->_rt6i_peer);
}
static inline void __rt6_set_peer(struct rt6_info *rt, struct inet_peer *peer)
{
__inetpeer_ptr_set_peer(&rt->_rt6i_peer, peer);
}
static inline bool rt6_set_peer(struct rt6_info *rt, struct inet_peer *peer)
{
return inetpeer_ptr_set_peer(&rt->_rt6i_peer, peer);
}
static inline void rt6_init_peer(struct rt6_info *rt, struct inet_peer_base *base)
{
inetpeer_init_ptr(&rt->_rt6i_peer, base);
}
static inline void rt6_transfer_peer(struct rt6_info *rt, struct rt6_info *ort)
{
inetpeer_transfer_peer(&rt->_rt6i_peer, &ort->_rt6i_peer);
}
static inline struct inet6_dev *ip6_dst_idev(struct dst_entry *dst)
{
return ((struct rt6_info *)dst)->rt6i_idev;
}
static inline void rt6_clean_expires(struct rt6_info *rt)
{
rt->rt6i_flags &= ~RTF_EXPIRES;
ipv6: reset dst.expires value when clearing expire flag On receiving a packet too big icmp error we update the expire value by calling rt6_update_expires. This function uses dst_set_expires which is implemented that it can only reduce the expiration value of the dst entry. If we insert new routing non-expiry information into the ipv6 fib where we already have a matching rt6_info we only clear the RTF_EXPIRES flag in rt6i_flags and leave the dst.expires value as is. When new mtu information arrives for that cached dst_entry we again call dst_set_expires. This time it won't update the dst.expire value because we left the dst.expire value intact from the last update. So dst_set_expires won't touch dst.expires. Fix this by resetting dst.expires when clearing the RTF_EXPIRE flag. dst_set_expires checks for a zero expiration and updates the dst.expires. In the past this (not updating dst.expires) was necessary because dst.expire was placed in a union with the dst_entry *from reference and rt6_clean_expires did assign NULL to it. This split happend in ecd9883724b78cc72ed92c98bcb1a46c764fff21 ("ipv6: fix race condition regarding dst->expires and dst->from"). Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Reported-by: Valentijn Sessink <valentyn@blub.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Valentijn Sessink <valentyn@blub.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-24 16:14:27 +08:00
rt->dst.expires = 0;
}
static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires)
{
rt->dst.expires = expires;
ipv6: fix race condition regarding dst->expires and dst->from. Eric Dumazet wrote: | Some strange crashes happen in rt6_check_expired(), with access | to random addresses. | | At first glance, it looks like the RTF_EXPIRES and | stuff added in commit 1716a96101c49186b | (ipv6: fix problem with expired dst cache) | are racy : same dst could be manipulated at the same time | on different cpus. | | At some point, our stack believes rt->dst.from contains a dst pointer, | while its really a jiffie value (as rt->dst.expires shares the same area | of memory) | | rt6_update_expires() should be fixed, or am I missing something ? | | CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060 Because we do not have any locks for dst_entry, we cannot change essential structure in the entry; e.g., we cannot change reference to other entity. To fix this issue, split 'from' and 'expires' field in dst_entry out of union. Once it is 'from' is assigned in the constructor, keep the reference until the very last stage of the life time of the object. Of course, it is unsafe to change 'from', so make rt6_set_from simple just for fresh entries. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Neil Horman <nhorman@tuxdriver.com> CC: Gao Feng <gaofeng@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reported-by: Steinar H. Gunderson <sesse@google.com> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20 08:29:08 +08:00
rt->rt6i_flags |= RTF_EXPIRES;
}
ipv6: fix race condition regarding dst->expires and dst->from. Eric Dumazet wrote: | Some strange crashes happen in rt6_check_expired(), with access | to random addresses. | | At first glance, it looks like the RTF_EXPIRES and | stuff added in commit 1716a96101c49186b | (ipv6: fix problem with expired dst cache) | are racy : same dst could be manipulated at the same time | on different cpus. | | At some point, our stack believes rt->dst.from contains a dst pointer, | while its really a jiffie value (as rt->dst.expires shares the same area | of memory) | | rt6_update_expires() should be fixed, or am I missing something ? | | CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060 Because we do not have any locks for dst_entry, we cannot change essential structure in the entry; e.g., we cannot change reference to other entity. To fix this issue, split 'from' and 'expires' field in dst_entry out of union. Once it is 'from' is assigned in the constructor, keep the reference until the very last stage of the life time of the object. Of course, it is unsafe to change 'from', so make rt6_set_from simple just for fresh entries. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Neil Horman <nhorman@tuxdriver.com> CC: Gao Feng <gaofeng@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reported-by: Steinar H. Gunderson <sesse@google.com> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20 08:29:08 +08:00
static inline void rt6_update_expires(struct rt6_info *rt0, int timeout)
{
ipv6: fix race condition regarding dst->expires and dst->from. Eric Dumazet wrote: | Some strange crashes happen in rt6_check_expired(), with access | to random addresses. | | At first glance, it looks like the RTF_EXPIRES and | stuff added in commit 1716a96101c49186b | (ipv6: fix problem with expired dst cache) | are racy : same dst could be manipulated at the same time | on different cpus. | | At some point, our stack believes rt->dst.from contains a dst pointer, | while its really a jiffie value (as rt->dst.expires shares the same area | of memory) | | rt6_update_expires() should be fixed, or am I missing something ? | | CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060 Because we do not have any locks for dst_entry, we cannot change essential structure in the entry; e.g., we cannot change reference to other entity. To fix this issue, split 'from' and 'expires' field in dst_entry out of union. Once it is 'from' is assigned in the constructor, keep the reference until the very last stage of the life time of the object. Of course, it is unsafe to change 'from', so make rt6_set_from simple just for fresh entries. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Neil Horman <nhorman@tuxdriver.com> CC: Gao Feng <gaofeng@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reported-by: Steinar H. Gunderson <sesse@google.com> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20 08:29:08 +08:00
struct rt6_info *rt;
for (rt = rt0; rt && !(rt->rt6i_flags & RTF_EXPIRES);
rt = (struct rt6_info *)rt->dst.from);
if (rt && rt != rt0)
rt0->dst.expires = rt->dst.expires;
dst_set_expires(&rt0->dst, timeout);
rt0->rt6i_flags |= RTF_EXPIRES;
}
static inline void rt6_set_from(struct rt6_info *rt, struct rt6_info *from)
{
struct dst_entry *new = (struct dst_entry *) from;
rt->rt6i_flags &= ~RTF_EXPIRES;
dst_hold(new);
ipv6: fix race condition regarding dst->expires and dst->from. Eric Dumazet wrote: | Some strange crashes happen in rt6_check_expired(), with access | to random addresses. | | At first glance, it looks like the RTF_EXPIRES and | stuff added in commit 1716a96101c49186b | (ipv6: fix problem with expired dst cache) | are racy : same dst could be manipulated at the same time | on different cpus. | | At some point, our stack believes rt->dst.from contains a dst pointer, | while its really a jiffie value (as rt->dst.expires shares the same area | of memory) | | rt6_update_expires() should be fixed, or am I missing something ? | | CC Neil because of https://bugzilla.redhat.com/show_bug.cgi?id=892060 Because we do not have any locks for dst_entry, we cannot change essential structure in the entry; e.g., we cannot change reference to other entity. To fix this issue, split 'from' and 'expires' field in dst_entry out of union. Once it is 'from' is assigned in the constructor, keep the reference until the very last stage of the life time of the object. Of course, it is unsafe to change 'from', so make rt6_set_from simple just for fresh entries. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Neil Horman <nhorman@tuxdriver.com> CC: Gao Feng <gaofeng@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reported-by: Steinar H. Gunderson <sesse@google.com> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-20 08:29:08 +08:00
rt->dst.from = new;
}
static inline void ip6_rt_put(struct rt6_info *rt)
{
/* dst_release() accepts a NULL parameter.
* We rely on dst being first structure in struct rt6_info
*/
BUILD_BUG_ON(offsetof(struct rt6_info, dst) != 0);
dst_release(&rt->dst);
}
struct fib6_walker_t {
struct list_head lh;
struct fib6_node *root, *node;
struct rt6_info *leaf;
unsigned char state;
unsigned char prune;
ipv6: fib: fix crash when changing large fib while dumping it When the fib size exceeds what can be dumped in a single skb, the dump is suspended and resumed once the last skb has been received by userspace. When the fib is changed while the dump is suspended, the walker might contain stale pointers, causing a crash when the dump is resumed. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] PGD 5347a067 PUD 65c7067 PMD 0 Oops: 0000 [#1] PREEMPT SMP ... RIP: 0010:[<ffffffffa01bce04>] [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] ... Call Trace: [<ffffffff8104aca3>] ? mutex_spin_on_owner+0x59/0x71 [<ffffffffa01bd105>] inet6_dump_fib+0x11b/0x1b9 [ipv6] [<ffffffff81371af4>] netlink_dump+0x5b/0x19e [<ffffffff8134f288>] ? consume_skb+0x28/0x2a [<ffffffff81373b69>] netlink_recvmsg+0x1ab/0x2c6 [<ffffffff81372781>] ? netlink_unicast+0xfa/0x151 [<ffffffff813483e0>] __sock_recvmsg+0x6d/0x79 [<ffffffff81348a53>] sock_recvmsg+0xca/0xe3 [<ffffffff81066d4b>] ? autoremove_wake_function+0x0/0x38 [<ffffffff811ed1f8>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff810b3ed7>] ? find_get_page+0x90/0xa5 [<ffffffff810b5dc5>] ? filemap_fault+0x201/0x34f [<ffffffff810ef152>] ? fget_light+0x2f/0xac [<ffffffff813519e7>] ? verify_iovec+0x4f/0x94 [<ffffffff81349a65>] sys_recvmsg+0x14d/0x223 Store the serial number when beginning to walk the fib and reload pointers when continuing to walk after a change occured. Similar to other dumping functions, this might cause unrelated entries to be missed when entries are deleted. Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08 13:19:03 +08:00
unsigned int skip;
unsigned int count;
int (*func)(struct fib6_walker_t *);
void *args;
};
struct rt6_statistics {
__u32 fib_nodes;
__u32 fib_route_nodes;
__u32 fib_rt_alloc; /* permanent routes */
__u32 fib_rt_entries; /* rt entries in table */
__u32 fib_rt_cache; /* cache routes */
__u32 fib_discarded_routes;
};
#define RTN_TL_ROOT 0x0001
#define RTN_ROOT 0x0002 /* tree root node */
#define RTN_RTINFO 0x0004 /* node with valid routing info */
/*
* priority levels (or metrics)
*
*/
struct fib6_table {
struct hlist_node tb6_hlist;
u32 tb6_id;
rwlock_t tb6_lock;
struct fib6_node tb6_root;
struct inet_peer_base tb6_peers;
};
#define RT6_TABLE_UNSPEC RT_TABLE_UNSPEC
#define RT6_TABLE_MAIN RT_TABLE_MAIN
#define RT6_TABLE_DFLT RT6_TABLE_MAIN
#define RT6_TABLE_INFO RT6_TABLE_MAIN
#define RT6_TABLE_PREFIX RT6_TABLE_MAIN
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
#define FIB6_TABLE_MIN 1
#define FIB6_TABLE_MAX RT_TABLE_MAX
#define RT6_TABLE_LOCAL RT_TABLE_LOCAL
#else
#define FIB6_TABLE_MIN RT_TABLE_MAIN
#define FIB6_TABLE_MAX FIB6_TABLE_MIN
#define RT6_TABLE_LOCAL RT6_TABLE_MAIN
#endif
typedef struct rt6_info *(*pol_lookup_t)(struct net *,
struct fib6_table *,
struct flowi6 *, int);
/*
* exported functions
*/
struct fib6_table *fib6_get_table(struct net *net, u32 id);
struct fib6_table *fib6_new_table(struct net *net, u32 id);
struct dst_entry *fib6_rule_lookup(struct net *net, struct flowi6 *fl6,
int flags, pol_lookup_t lookup);
struct fib6_node *fib6_lookup(struct fib6_node *root,
const struct in6_addr *daddr,
const struct in6_addr *saddr);
struct fib6_node *fib6_locate(struct fib6_node *root,
const struct in6_addr *daddr, int dst_len,
const struct in6_addr *saddr, int src_len);
void fib6_clean_all(struct net *net, int (*func)(struct rt6_info *, void *arg),
void *arg);
ipv6: do not overwrite inetpeer metrics prematurely If an IPv6 host route with metrics exists, an attempt to add a new route for the same target with different metrics fails but rewrites the metrics anyway: 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 rto_min lock 1s 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1500 RTNETLINK answers: File exists 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 rto_min lock 1.5s This is caused by all IPv6 host routes using the metrics in their inetpeer (or the shared default). This also holds for the new route created in ip6_route_add() which shares the metrics with the already existing route and thus ip6_route_add() rewrites the metrics even if the new route ends up not being used at all. Another problem is that old metrics in inetpeer can reappear unexpectedly for a new route, e.g. 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000 12sp0:~ # ip route del fec0::1 12sp0:~ # ip route add fec0::1 dev eth0 12sp0:~ # ip route change fec0::1 dev eth0 hoplimit 10 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 hoplimit 10 rto_min lock 1s Resolve the first problem by moving the setting of metrics down into fib6_add_rt2node() to the point we are sure we are inserting the new route into the tree. Second problem is addressed by introducing new flag DST_METRICS_FORCE_OVERWRITE which is set for a new host route in ip6_route_add() and makes ipv6_cow_metrics() always overwrite the metrics in inetpeer (even if they are not "new"); it is reset after that. v5: use a flag in _metrics member rather than one in flags v4: fix a typo making a condition always true (thanks to Hannes Frederic Sowa) v3: rewritten based on David Miller's idea to move setting the metrics (and allocation in non-host case) down to the point we already know the route is to be inserted. Also rebased to net-next as it is quite late in the cycle. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27 20:04:08 +08:00
int fib6_add(struct fib6_node *root, struct rt6_info *rt, struct nl_info *info,
struct nlattr *mx, int mx_len);
int fib6_del(struct rt6_info *rt, struct nl_info *info);
void inet6_rt_notify(int event, struct rt6_info *rt, struct nl_info *info);
void fib6_run_gc(unsigned long expires, struct net *net, bool force);
void fib6_gc_cleanup(void);
int fib6_init(void);
int ipv6_route_open(struct inode *inode, struct file *file);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
int fib6_rules_init(void);
void fib6_rules_cleanup(void);
#else
static inline int fib6_rules_init(void)
{
return 0;
}
static inline void fib6_rules_cleanup(void)
{
return ;
}
#endif
#endif