linux-sg2042/drivers/gpio/gpio-max732x.c

765 lines
18 KiB
C
Raw Normal View History

/*
* MAX732x I2C Port Expander with 8/16 I/O
*
* Copyright (C) 2007 Marvell International Ltd.
* Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
* Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
* Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
*
* Derived from drivers/gpio/pca953x.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/max732x.h>
#include <linux/of.h>
/*
* Each port of MAX732x (including MAX7319) falls into one of the
* following three types:
*
* - Push Pull Output
* - Input
* - Open Drain I/O
*
* designated by 'O', 'I' and 'P' individually according to MAXIM's
* datasheets. 'I' and 'P' ports are interrupt capables, some with
* a dedicated interrupt mask.
*
* There are two groups of I/O ports, each group usually includes
* up to 8 I/O ports, and is accessed by a specific I2C address:
*
* - Group A : by I2C address 0b'110xxxx
* - Group B : by I2C address 0b'101xxxx
*
* where 'xxxx' is decided by the connections of pin AD2/AD0. The
* address used also affects the initial state of output signals.
*
* Within each group of ports, there are five known combinations of
* I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
* the detailed organization of these ports. Only Goup A is interrupt
* capable.
*
* GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
* and GPIOs from GROUP_A are numbered before those from GROUP_B
* (if there are two groups).
*
* NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so
* they are not supported by this driver.
*/
#define PORT_NONE 0x0 /* '/' No Port */
#define PORT_OUTPUT 0x1 /* 'O' Push-Pull, Output Only */
#define PORT_INPUT 0x2 /* 'I' Input Only */
#define PORT_OPENDRAIN 0x3 /* 'P' Open-Drain, I/O */
#define IO_4I4O 0x5AA5 /* O7 O6 I5 I4 I3 I2 O1 O0 */
#define IO_4P4O 0x5FF5 /* O7 O6 P5 P4 P3 P2 O1 O0 */
#define IO_8I 0xAAAA /* I7 I6 I5 I4 I3 I2 I1 I0 */
#define IO_8P 0xFFFF /* P7 P6 P5 P4 P3 P2 P1 P0 */
#define IO_8O 0x5555 /* O7 O6 O5 O4 O3 O2 O1 O0 */
#define GROUP_A(x) ((x) & 0xffff) /* I2C Addr: 0b'110xxxx */
#define GROUP_B(x) ((x) << 16) /* I2C Addr: 0b'101xxxx */
#define INT_NONE 0x0 /* No interrupt capability */
#define INT_NO_MASK 0x1 /* Has interrupts, no mask */
#define INT_INDEP_MASK 0x2 /* Has interrupts, independent mask */
#define INT_MERGED_MASK 0x3 /* Has interrupts, merged mask */
#define INT_CAPS(x) (((uint64_t)(x)) << 32)
enum {
MAX7319,
MAX7320,
MAX7321,
MAX7322,
MAX7323,
MAX7324,
MAX7325,
MAX7326,
MAX7327,
};
static uint64_t max732x_features[] = {
[MAX7319] = GROUP_A(IO_8I) | INT_CAPS(INT_MERGED_MASK),
[MAX7320] = GROUP_B(IO_8O),
[MAX7321] = GROUP_A(IO_8P) | INT_CAPS(INT_NO_MASK),
[MAX7322] = GROUP_A(IO_4I4O) | INT_CAPS(INT_MERGED_MASK),
[MAX7323] = GROUP_A(IO_4P4O) | INT_CAPS(INT_INDEP_MASK),
[MAX7324] = GROUP_A(IO_8I) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
[MAX7325] = GROUP_A(IO_8P) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
[MAX7326] = GROUP_A(IO_4I4O) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
[MAX7327] = GROUP_A(IO_4P4O) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
};
static const struct i2c_device_id max732x_id[] = {
{ "max7319", MAX7319 },
{ "max7320", MAX7320 },
{ "max7321", MAX7321 },
{ "max7322", MAX7322 },
{ "max7323", MAX7323 },
{ "max7324", MAX7324 },
{ "max7325", MAX7325 },
{ "max7326", MAX7326 },
{ "max7327", MAX7327 },
{ },
};
MODULE_DEVICE_TABLE(i2c, max732x_id);
#ifdef CONFIG_OF
static const struct of_device_id max732x_of_table[] = {
{ .compatible = "maxim,max7319" },
{ .compatible = "maxim,max7320" },
{ .compatible = "maxim,max7321" },
{ .compatible = "maxim,max7322" },
{ .compatible = "maxim,max7323" },
{ .compatible = "maxim,max7324" },
{ .compatible = "maxim,max7325" },
{ .compatible = "maxim,max7326" },
{ .compatible = "maxim,max7327" },
{ }
};
MODULE_DEVICE_TABLE(of, max732x_of_table);
#endif
struct max732x_chip {
struct gpio_chip gpio_chip;
struct i2c_client *client; /* "main" client */
struct i2c_client *client_dummy;
struct i2c_client *client_group_a;
struct i2c_client *client_group_b;
unsigned int mask_group_a;
unsigned int dir_input;
unsigned int dir_output;
struct mutex lock;
uint8_t reg_out[2];
#ifdef CONFIG_GPIO_MAX732X_IRQ
struct mutex irq_lock;
uint8_t irq_mask;
uint8_t irq_mask_cur;
uint8_t irq_trig_raise;
uint8_t irq_trig_fall;
uint8_t irq_features;
#endif
};
static inline struct max732x_chip *to_max732x(struct gpio_chip *gc)
{
return container_of(gc, struct max732x_chip, gpio_chip);
}
static int max732x_writeb(struct max732x_chip *chip, int group_a, uint8_t val)
{
struct i2c_client *client;
int ret;
client = group_a ? chip->client_group_a : chip->client_group_b;
ret = i2c_smbus_write_byte(client, val);
if (ret < 0) {
dev_err(&client->dev, "failed writing\n");
return ret;
}
return 0;
}
static int max732x_readb(struct max732x_chip *chip, int group_a, uint8_t *val)
{
struct i2c_client *client;
int ret;
client = group_a ? chip->client_group_a : chip->client_group_b;
ret = i2c_smbus_read_byte(client);
if (ret < 0) {
dev_err(&client->dev, "failed reading\n");
return ret;
}
*val = (uint8_t)ret;
return 0;
}
static inline int is_group_a(struct max732x_chip *chip, unsigned off)
{
return (1u << off) & chip->mask_group_a;
}
static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off)
{
struct max732x_chip *chip = to_max732x(gc);
uint8_t reg_val;
int ret;
ret = max732x_readb(chip, is_group_a(chip, off), &reg_val);
if (ret < 0)
return 0;
return reg_val & (1u << (off & 0x7));
}
static void max732x_gpio_set_mask(struct gpio_chip *gc, unsigned off, int mask,
int val)
{
struct max732x_chip *chip = to_max732x(gc);
uint8_t reg_out;
int ret;
mutex_lock(&chip->lock);
reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
reg_out = (reg_out & ~mask) | (val & mask);
ret = max732x_writeb(chip, is_group_a(chip, off), reg_out);
if (ret < 0)
goto out;
/* update the shadow register then */
if (off > 7)
chip->reg_out[1] = reg_out;
else
chip->reg_out[0] = reg_out;
out:
mutex_unlock(&chip->lock);
}
static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
{
unsigned base = off & ~0x7;
uint8_t mask = 1u << (off & 0x7);
max732x_gpio_set_mask(gc, base, mask, val << (off & 0x7));
}
static void max732x_gpio_set_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
unsigned mask_lo = mask[0] & 0xff;
unsigned mask_hi = (mask[0] >> 8) & 0xff;
if (mask_lo)
max732x_gpio_set_mask(gc, 0, mask_lo, bits[0] & 0xff);
if (mask_hi)
max732x_gpio_set_mask(gc, 8, mask_hi, (bits[0] >> 8) & 0xff);
}
static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
{
struct max732x_chip *chip = to_max732x(gc);
unsigned int mask = 1u << off;
if ((mask & chip->dir_input) == 0) {
dev_dbg(&chip->client->dev, "%s port %d is output only\n",
chip->client->name, off);
return -EACCES;
}
/*
* Open-drain pins must be set to high impedance (which is
* equivalent to output-high) to be turned into an input.
*/
if ((mask & chip->dir_output))
max732x_gpio_set_value(gc, off, 1);
return 0;
}
static int max732x_gpio_direction_output(struct gpio_chip *gc,
unsigned off, int val)
{
struct max732x_chip *chip = to_max732x(gc);
unsigned int mask = 1u << off;
if ((mask & chip->dir_output) == 0) {
dev_dbg(&chip->client->dev, "%s port %d is input only\n",
chip->client->name, off);
return -EACCES;
}
max732x_gpio_set_value(gc, off, val);
return 0;
}
#ifdef CONFIG_GPIO_MAX732X_IRQ
static int max732x_writew(struct max732x_chip *chip, uint16_t val)
{
int ret;
val = cpu_to_le16(val);
ret = i2c_master_send(chip->client_group_a, (char *)&val, 2);
if (ret < 0) {
dev_err(&chip->client_group_a->dev, "failed writing\n");
return ret;
}
return 0;
}
static int max732x_readw(struct max732x_chip *chip, uint16_t *val)
{
int ret;
ret = i2c_master_recv(chip->client_group_a, (char *)val, 2);
if (ret < 0) {
dev_err(&chip->client_group_a->dev, "failed reading\n");
return ret;
}
*val = le16_to_cpu(*val);
return 0;
}
static void max732x_irq_update_mask(struct max732x_chip *chip)
{
uint16_t msg;
if (chip->irq_mask == chip->irq_mask_cur)
return;
chip->irq_mask = chip->irq_mask_cur;
if (chip->irq_features == INT_NO_MASK)
return;
mutex_lock(&chip->lock);
switch (chip->irq_features) {
case INT_INDEP_MASK:
msg = (chip->irq_mask << 8) | chip->reg_out[0];
max732x_writew(chip, msg);
break;
case INT_MERGED_MASK:
msg = chip->irq_mask | chip->reg_out[0];
max732x_writeb(chip, 1, (uint8_t)msg);
break;
}
mutex_unlock(&chip->lock);
}
static void max732x_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct max732x_chip *chip = to_max732x(gc);
chip->irq_mask_cur &= ~(1 << d->hwirq);
}
static void max732x_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct max732x_chip *chip = to_max732x(gc);
chip->irq_mask_cur |= 1 << d->hwirq;
}
static void max732x_irq_bus_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct max732x_chip *chip = to_max732x(gc);
mutex_lock(&chip->irq_lock);
chip->irq_mask_cur = chip->irq_mask;
}
static void max732x_irq_bus_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct max732x_chip *chip = to_max732x(gc);
gpio: max732x: Fix possible deadlock This patch was derived from next one: "gpio: fix pca953x set_type 'scheduling while atomic' bug". After adding entry that consumes max732x GPIO as interrupt line to dts file, deadlock appears somewhere in max732x probe function. Deadlock caught by lockdep (from kernel log): <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>> [ 0.473419] ====================================================== [ 0.473419] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] [ 0.473449] 3.x.xx-xxxxx-xxxxxxxx-dirty #2 Tainted: G W [ 0.473449] ------------------------------------------------------ [ 0.473449] swapper/0/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 0.473449] (&lock->wait_lock){+.+...}, at: [<c072e350>] rt_mutex_trylock+0xc/0x74 [ 0.473480] [ 0.473480] and this task is already holding: [ 0.473510] (&chip->lock){......}, at: [<c0314514>] max732x_gpio_set_value+0x2c/0xa4 [ 0.473541] which would create a new lock dependency: [ 0.473541] (&chip->lock){......} -> (&lock->wait_lock){+.+...} ... [ 0.474273] *** DEADLOCK *** [ 0.474273] [ 0.474273] 5 locks held by swapper/0/1: [ 0.474273] #0: (&__lockdep_no_validate__){......}, at: [<c03b2328>] __driver_attach+0x48/0x98 [ 0.474304] #1: (&__lockdep_no_validate__){......}, at: [<c03b2338>] __driver_attach+0x58/0x98 [ 0.474334] #2: (&chip->irq_lock){+.+...}, at: [<c0313e3c>] max732x_irq_bus_lock+0x14/0x20 [ 0.474365] #3: (&irq_desc_lock_class){-.....}, at: [<c00a65a4>] __irq_get_desc_lock+0x48/0x88 [ 0.474365] #4: (&chip->lock){......}, at: [<c0314514>] max732x_gpio <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>> Signed-off-by: Semen Protsenko <semen.protsenko@globallogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-13 21:41:44 +08:00
uint16_t new_irqs;
uint16_t level;
max732x_irq_update_mask(chip);
gpio: max732x: Fix possible deadlock This patch was derived from next one: "gpio: fix pca953x set_type 'scheduling while atomic' bug". After adding entry that consumes max732x GPIO as interrupt line to dts file, deadlock appears somewhere in max732x probe function. Deadlock caught by lockdep (from kernel log): <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>> [ 0.473419] ====================================================== [ 0.473419] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] [ 0.473449] 3.x.xx-xxxxx-xxxxxxxx-dirty #2 Tainted: G W [ 0.473449] ------------------------------------------------------ [ 0.473449] swapper/0/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 0.473449] (&lock->wait_lock){+.+...}, at: [<c072e350>] rt_mutex_trylock+0xc/0x74 [ 0.473480] [ 0.473480] and this task is already holding: [ 0.473510] (&chip->lock){......}, at: [<c0314514>] max732x_gpio_set_value+0x2c/0xa4 [ 0.473541] which would create a new lock dependency: [ 0.473541] (&chip->lock){......} -> (&lock->wait_lock){+.+...} ... [ 0.474273] *** DEADLOCK *** [ 0.474273] [ 0.474273] 5 locks held by swapper/0/1: [ 0.474273] #0: (&__lockdep_no_validate__){......}, at: [<c03b2328>] __driver_attach+0x48/0x98 [ 0.474304] #1: (&__lockdep_no_validate__){......}, at: [<c03b2338>] __driver_attach+0x58/0x98 [ 0.474334] #2: (&chip->irq_lock){+.+...}, at: [<c0313e3c>] max732x_irq_bus_lock+0x14/0x20 [ 0.474365] #3: (&irq_desc_lock_class){-.....}, at: [<c00a65a4>] __irq_get_desc_lock+0x48/0x88 [ 0.474365] #4: (&chip->lock){......}, at: [<c0314514>] max732x_gpio <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>> Signed-off-by: Semen Protsenko <semen.protsenko@globallogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-13 21:41:44 +08:00
new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
while (new_irqs) {
level = __ffs(new_irqs);
max732x_gpio_direction_input(&chip->gpio_chip, level);
new_irqs &= ~(1 << level);
}
mutex_unlock(&chip->irq_lock);
}
static int max732x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct max732x_chip *chip = to_max732x(gc);
uint16_t off = d->hwirq;
uint16_t mask = 1 << off;
if (!(mask & chip->dir_input)) {
dev_dbg(&chip->client->dev, "%s port %d is output only\n",
chip->client->name, off);
return -EACCES;
}
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
d->irq, type);
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_FALLING)
chip->irq_trig_fall |= mask;
else
chip->irq_trig_fall &= ~mask;
if (type & IRQ_TYPE_EDGE_RISING)
chip->irq_trig_raise |= mask;
else
chip->irq_trig_raise &= ~mask;
gpio: max732x: Fix possible deadlock This patch was derived from next one: "gpio: fix pca953x set_type 'scheduling while atomic' bug". After adding entry that consumes max732x GPIO as interrupt line to dts file, deadlock appears somewhere in max732x probe function. Deadlock caught by lockdep (from kernel log): <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>> [ 0.473419] ====================================================== [ 0.473419] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] [ 0.473449] 3.x.xx-xxxxx-xxxxxxxx-dirty #2 Tainted: G W [ 0.473449] ------------------------------------------------------ [ 0.473449] swapper/0/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 0.473449] (&lock->wait_lock){+.+...}, at: [<c072e350>] rt_mutex_trylock+0xc/0x74 [ 0.473480] [ 0.473480] and this task is already holding: [ 0.473510] (&chip->lock){......}, at: [<c0314514>] max732x_gpio_set_value+0x2c/0xa4 [ 0.473541] which would create a new lock dependency: [ 0.473541] (&chip->lock){......} -> (&lock->wait_lock){+.+...} ... [ 0.474273] *** DEADLOCK *** [ 0.474273] [ 0.474273] 5 locks held by swapper/0/1: [ 0.474273] #0: (&__lockdep_no_validate__){......}, at: [<c03b2328>] __driver_attach+0x48/0x98 [ 0.474304] #1: (&__lockdep_no_validate__){......}, at: [<c03b2338>] __driver_attach+0x58/0x98 [ 0.474334] #2: (&chip->irq_lock){+.+...}, at: [<c0313e3c>] max732x_irq_bus_lock+0x14/0x20 [ 0.474365] #3: (&irq_desc_lock_class){-.....}, at: [<c00a65a4>] __irq_get_desc_lock+0x48/0x88 [ 0.474365] #4: (&chip->lock){......}, at: [<c0314514>] max732x_gpio <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>> Signed-off-by: Semen Protsenko <semen.protsenko@globallogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-13 21:41:44 +08:00
return 0;
}
static struct irq_chip max732x_irq_chip = {
.name = "max732x",
.irq_mask = max732x_irq_mask,
.irq_unmask = max732x_irq_unmask,
.irq_bus_lock = max732x_irq_bus_lock,
.irq_bus_sync_unlock = max732x_irq_bus_sync_unlock,
.irq_set_type = max732x_irq_set_type,
};
static uint8_t max732x_irq_pending(struct max732x_chip *chip)
{
uint8_t cur_stat;
uint8_t old_stat;
uint8_t trigger;
uint8_t pending;
uint16_t status;
int ret;
ret = max732x_readw(chip, &status);
if (ret)
return 0;
trigger = status >> 8;
trigger &= chip->irq_mask;
if (!trigger)
return 0;
cur_stat = status & 0xFF;
cur_stat &= chip->irq_mask;
old_stat = cur_stat ^ trigger;
pending = (old_stat & chip->irq_trig_fall) |
(cur_stat & chip->irq_trig_raise);
pending &= trigger;
return pending;
}
static irqreturn_t max732x_irq_handler(int irq, void *devid)
{
struct max732x_chip *chip = devid;
uint8_t pending;
uint8_t level;
pending = max732x_irq_pending(chip);
if (!pending)
return IRQ_HANDLED;
do {
level = __ffs(pending);
handle_nested_irq(irq_find_mapping(chip->gpio_chip.irqdomain,
level));
pending &= ~(1 << level);
} while (pending);
return IRQ_HANDLED;
}
static int max732x_irq_setup(struct max732x_chip *chip,
const struct i2c_device_id *id)
{
struct i2c_client *client = chip->client;
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
int has_irq = max732x_features[id->driver_data] >> 32;
int irq_base = 0;
int ret;
if (((pdata && pdata->irq_base) || client->irq)
&& has_irq != INT_NONE) {
if (pdata)
irq_base = pdata->irq_base;
chip->irq_features = has_irq;
mutex_init(&chip->irq_lock);
ret = devm_request_threaded_irq(&client->dev,
client->irq,
NULL,
max732x_irq_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(&client->dev), chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
return ret;
}
ret = gpiochip_irqchip_add(&chip->gpio_chip,
&max732x_irq_chip,
irq_base,
handle_edge_irq,
IRQ_TYPE_NONE);
if (ret) {
dev_err(&client->dev,
"could not connect irqchip to gpiochip\n");
return ret;
}
gpiochip_set_chained_irqchip(&chip->gpio_chip,
&max732x_irq_chip,
client->irq,
NULL);
}
return 0;
}
#else /* CONFIG_GPIO_MAX732X_IRQ */
static int max732x_irq_setup(struct max732x_chip *chip,
const struct i2c_device_id *id)
{
struct i2c_client *client = chip->client;
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
int has_irq = max732x_features[id->driver_data] >> 32;
if (((pdata && pdata->irq_base) || client->irq) && has_irq != INT_NONE)
dev_warn(&client->dev, "interrupt support not compiled in\n");
return 0;
}
#endif
static int max732x_setup_gpio(struct max732x_chip *chip,
const struct i2c_device_id *id,
unsigned gpio_start)
{
struct gpio_chip *gc = &chip->gpio_chip;
uint32_t id_data = (uint32_t)max732x_features[id->driver_data];
int i, port = 0;
for (i = 0; i < 16; i++, id_data >>= 2) {
unsigned int mask = 1 << port;
switch (id_data & 0x3) {
case PORT_OUTPUT:
chip->dir_output |= mask;
break;
case PORT_INPUT:
chip->dir_input |= mask;
break;
case PORT_OPENDRAIN:
chip->dir_output |= mask;
chip->dir_input |= mask;
break;
default:
continue;
}
if (i < 8)
chip->mask_group_a |= mask;
port++;
}
if (chip->dir_input)
gc->direction_input = max732x_gpio_direction_input;
if (chip->dir_output) {
gc->direction_output = max732x_gpio_direction_output;
gc->set = max732x_gpio_set_value;
gc->set_multiple = max732x_gpio_set_multiple;
}
gc->get = max732x_gpio_get_value;
gc->can_sleep = true;
gc->base = gpio_start;
gc->ngpio = port;
gc->label = chip->client->name;
gc->owner = THIS_MODULE;
return port;
}
static struct max732x_platform_data *of_gpio_max732x(struct device *dev)
{
struct max732x_platform_data *pdata;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
pdata->gpio_base = -1;
return pdata;
}
static int max732x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max732x_platform_data *pdata;
struct device_node *node;
struct max732x_chip *chip;
struct i2c_client *c;
uint16_t addr_a, addr_b;
int ret, nr_port;
pdata = dev_get_platdata(&client->dev);
node = client->dev.of_node;
if (!pdata && node)
pdata = of_gpio_max732x(&client->dev);
if (!pdata) {
dev_dbg(&client->dev, "no platform data\n");
return -EINVAL;
}
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
chip->client = client;
nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base);
chip->gpio_chip.dev = &client->dev;
addr_a = (client->addr & 0x0f) | 0x60;
addr_b = (client->addr & 0x0f) | 0x50;
switch (client->addr & 0x70) {
case 0x60:
chip->client_group_a = client;
if (nr_port > 8) {
c = i2c_new_dummy(client->adapter, addr_b);
chip->client_group_b = chip->client_dummy = c;
}
break;
case 0x50:
chip->client_group_b = client;
if (nr_port > 8) {
c = i2c_new_dummy(client->adapter, addr_a);
chip->client_group_a = chip->client_dummy = c;
}
break;
default:
dev_err(&client->dev, "invalid I2C address specified %02x\n",
client->addr);
ret = -EINVAL;
goto out_failed;
}
if (nr_port > 8 && !chip->client_dummy) {
dev_err(&client->dev,
"Failed to allocate second group I2C device\n");
ret = -ENODEV;
goto out_failed;
}
mutex_init(&chip->lock);
max732x_readb(chip, is_group_a(chip, 0), &chip->reg_out[0]);
if (nr_port > 8)
max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]);
ret = gpiochip_add(&chip->gpio_chip);
if (ret)
goto out_failed;
ret = max732x_irq_setup(chip, id);
if (ret) {
gpiochip_remove(&chip->gpio_chip);
goto out_failed;
}
if (pdata && pdata->setup) {
ret = pdata->setup(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0)
dev_warn(&client->dev, "setup failed, %d\n", ret);
}
i2c_set_clientdata(client, chip);
return 0;
out_failed:
if (chip->client_dummy)
i2c_unregister_device(chip->client_dummy);
return ret;
}
static int max732x_remove(struct i2c_client *client)
{
struct max732x_platform_data *pdata = dev_get_platdata(&client->dev);
struct max732x_chip *chip = i2c_get_clientdata(client);
if (pdata && pdata->teardown) {
int ret;
ret = pdata->teardown(client, chip->gpio_chip.base,
chip->gpio_chip.ngpio, pdata->context);
if (ret < 0) {
dev_err(&client->dev, "%s failed, %d\n",
"teardown", ret);
return ret;
}
}
gpiochip_remove(&chip->gpio_chip);
/* unregister any dummy i2c_client */
if (chip->client_dummy)
i2c_unregister_device(chip->client_dummy);
return 0;
}
static struct i2c_driver max732x_driver = {
.driver = {
.name = "max732x",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(max732x_of_table),
},
.probe = max732x_probe,
.remove = max732x_remove,
.id_table = max732x_id,
};
static int __init max732x_init(void)
{
return i2c_add_driver(&max732x_driver);
}
/* register after i2c postcore initcall and before
* subsys initcalls that may rely on these GPIOs
*/
subsys_initcall(max732x_init);
static void __exit max732x_exit(void)
{
i2c_del_driver(&max732x_driver);
}
module_exit(max732x_exit);
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("GPIO expander driver for MAX732X");
MODULE_LICENSE("GPL");