linux-sg2042/include/target/target_core_base.h

935 lines
27 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef TARGET_CORE_BASE_H
#define TARGET_CORE_BASE_H
#include <linux/configfs.h> /* struct config_group */
#include <linux/dma-direction.h> /* enum dma_data_direction */
#include <linux/percpu_ida.h> /* struct percpu_ida */
#include <linux/percpu-refcount.h>
#include <linux/semaphore.h> /* struct semaphore */
#include <linux/completion.h>
#define TARGET_CORE_VERSION "v5.0"
/*
* Maximum size of a CDB that can be stored in se_cmd without allocating
* memory dynamically for the CDB.
*/
#define TCM_MAX_COMMAND_SIZE 32
/*
* From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
* defined 96, but the real limit is 252 (or 260 including the header)
*/
#define TRANSPORT_SENSE_BUFFER 96
/* Used by transport_send_check_condition_and_sense() */
#define SPC_SENSE_KEY_OFFSET 2
#define SPC_ADD_SENSE_LEN_OFFSET 7
#define SPC_DESC_TYPE_OFFSET 8
#define SPC_ADDITIONAL_DESC_LEN_OFFSET 9
#define SPC_VALIDITY_OFFSET 10
#define SPC_ASC_KEY_OFFSET 12
#define SPC_ASCQ_KEY_OFFSET 13
#define TRANSPORT_IQN_LEN 224
/* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
#define LU_GROUP_NAME_BUF 256
/* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
#define TG_PT_GROUP_NAME_BUF 256
/* Used to parse VPD into struct t10_vpd */
#define VPD_TMP_BUF_SIZE 254
/* Used by transport_generic_cmd_sequencer() */
#define READ_BLOCK_LEN 6
#define READ_CAP_LEN 8
#define READ_POSITION_LEN 20
#define INQUIRY_LEN 36
/* Used by transport_get_inquiry_vpd_serial() */
#define INQUIRY_VPD_SERIAL_LEN 254
/* Used by transport_get_inquiry_vpd_device_ident() */
#define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254
/* Attempts before moving from SHORT to LONG */
#define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */
#define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */
/* struct se_dev_attrib sanity values */
/* Default max_unmap_lba_count */
#define DA_MAX_UNMAP_LBA_COUNT 0
/* Default max_unmap_block_desc_count */
#define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0
/* Default unmap_granularity */
#define DA_UNMAP_GRANULARITY_DEFAULT 0
/* Default unmap_granularity_alignment */
#define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0
/* Default unmap_zeroes_data */
#define DA_UNMAP_ZEROES_DATA_DEFAULT 0
/* Default max_write_same_len, disabled by default */
#define DA_MAX_WRITE_SAME_LEN 0
/* Use a model alias based on the configfs backend device name */
#define DA_EMULATE_MODEL_ALIAS 0
/* Emulation for WriteCache and SYNCHRONIZE_CACHE */
#define DA_EMULATE_WRITE_CACHE 0
/* Emulation for UNIT ATTENTION Interlock Control */
#define DA_EMULATE_UA_INTLLCK_CTRL 0
/* Emulation for TASK_ABORTED status (TAS) by default */
#define DA_EMULATE_TAS 1
/* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
#define DA_EMULATE_TPU 0
/*
* Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
* block/blk-lib.c:blkdev_issue_discard()
*/
#define DA_EMULATE_TPWS 0
/* Emulation for CompareAndWrite (AtomicTestandSet) by default */
#define DA_EMULATE_CAW 1
/* Emulation for 3rd Party Copy (ExtendedCopy) by default */
#define DA_EMULATE_3PC 1
/* No Emulation for PSCSI by default */
#define DA_EMULATE_ALUA 0
/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
#define DA_ENFORCE_PR_ISIDS 1
/* Force SPC-3 PR Activate Persistence across Target Power Loss */
#define DA_FORCE_PR_APTPL 0
#define DA_STATUS_MAX_SECTORS_MIN 16
#define DA_STATUS_MAX_SECTORS_MAX 8192
/* By default don't report non-rotating (solid state) medium */
#define DA_IS_NONROT 0
/* Queue Algorithm Modifier default for restricted reordering in control mode page */
#define DA_EMULATE_REST_REORD 0
#define SE_INQUIRY_BUF 1024
#define SE_MODE_PAGE_BUF 512
#define SE_SENSE_BUF 96
/* struct se_hba->hba_flags */
enum hba_flags_table {
HBA_FLAGS_INTERNAL_USE = 0x01,
HBA_FLAGS_PSCSI_MODE = 0x02,
};
/* Special transport agnostic struct se_cmd->t_states */
enum transport_state_table {
TRANSPORT_NO_STATE = 0,
TRANSPORT_NEW_CMD = 1,
TRANSPORT_WRITE_PENDING = 3,
TRANSPORT_PROCESSING = 5,
TRANSPORT_COMPLETE = 6,
TRANSPORT_ISTATE_PROCESSING = 11,
TRANSPORT_COMPLETE_QF_WP = 18,
TRANSPORT_COMPLETE_QF_OK = 19,
TRANSPORT_COMPLETE_QF_ERR = 20,
};
/* Used for struct se_cmd->se_cmd_flags */
enum se_cmd_flags_table {
SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
SCF_TRANSPORT_TASK_SENSE = 0x00000002,
SCF_EMULATED_TASK_SENSE = 0x00000004,
SCF_SCSI_DATA_CDB = 0x00000008,
SCF_SCSI_TMR_CDB = 0x00000010,
SCF_FUA = 0x00000080,
SCF_SE_LUN_CMD = 0x00000100,
SCF_BIDI = 0x00000400,
SCF_SENT_CHECK_CONDITION = 0x00000800,
SCF_OVERFLOW_BIT = 0x00001000,
SCF_UNDERFLOW_BIT = 0x00002000,
SCF_SEND_DELAYED_TAS = 0x00004000,
SCF_ALUA_NON_OPTIMIZED = 0x00008000,
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
SCF_COMPARE_AND_WRITE = 0x00080000,
SCF_COMPARE_AND_WRITE_POST = 0x00100000,
SCF_PASSTHROUGH_PROT_SG_TO_MEM_NOALLOC = 0x00200000,
target: Fix LUN_RESET active I/O handling for ACK_KREF This patch fixes a NULL pointer se_cmd->cmd_kref < 0 refcount bug during TMR LUN_RESET with active se_cmd I/O, that can be triggered during se_cmd descriptor shutdown + release via core_tmr_drain_state_list() code. To address this bug, add common __target_check_io_state() helper for ABORT_TASK + LUN_RESET w/ CMD_T_COMPLETE checking, and set CMD_T_ABORTED + obtain ->cmd_kref for both cases ahead of last target_put_sess_cmd() after TFO->aborted_task() -> transport_cmd_finish_abort() callback has completed. It also introduces SCF_ACK_KREF to determine when transport_cmd_finish_abort() needs to drop the second extra reference, ahead of calling target_put_sess_cmd() for the final kref_put(&se_cmd->cmd_kref). It also updates transport_cmd_check_stop() to avoid holding se_cmd->t_state_lock while dropping se_cmd device state via target_remove_from_state_list(), now that core_tmr_drain_state_list() is holding the se_device lock while checking se_cmd state from within TMR logic. Finally, move transport_put_cmd() release of SGL + TMR + extended CDB memory into target_free_cmd_mem() in order to avoid potential resource leaks in TMR ABORT_TASK + LUN_RESET code-paths. Also update target_release_cmd_kref() accordingly. Reviewed-by: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-12 13:31:09 +08:00
SCF_ACK_KREF = 0x00400000,
SCF_USE_CPUID = 0x00800000,
SCF_TASK_ATTR_SET = 0x01000000,
};
/*
* Used by transport_send_check_condition_and_sense()
* to signal which ASC/ASCQ sense payload should be built.
*/
typedef unsigned __bitwise sense_reason_t;
enum tcm_sense_reason_table {
#define R(x) (__force sense_reason_t )(x)
TCM_NO_SENSE = R(0x00),
TCM_NON_EXISTENT_LUN = R(0x01),
TCM_UNSUPPORTED_SCSI_OPCODE = R(0x02),
TCM_INCORRECT_AMOUNT_OF_DATA = R(0x03),
TCM_UNEXPECTED_UNSOLICITED_DATA = R(0x04),
TCM_SERVICE_CRC_ERROR = R(0x05),
TCM_SNACK_REJECTED = R(0x06),
TCM_SECTOR_COUNT_TOO_MANY = R(0x07),
TCM_INVALID_CDB_FIELD = R(0x08),
TCM_INVALID_PARAMETER_LIST = R(0x09),
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = R(0x0a),
TCM_UNKNOWN_MODE_PAGE = R(0x0b),
TCM_WRITE_PROTECTED = R(0x0c),
TCM_CHECK_CONDITION_ABORT_CMD = R(0x0d),
TCM_CHECK_CONDITION_UNIT_ATTENTION = R(0x0e),
TCM_CHECK_CONDITION_NOT_READY = R(0x0f),
TCM_RESERVATION_CONFLICT = R(0x10),
TCM_ADDRESS_OUT_OF_RANGE = R(0x11),
TCM_OUT_OF_RESOURCES = R(0x12),
TCM_PARAMETER_LIST_LENGTH_ERROR = R(0x13),
TCM_MISCOMPARE_VERIFY = R(0x14),
TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED = R(0x15),
TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED = R(0x16),
TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED = R(0x17),
TCM_COPY_TARGET_DEVICE_NOT_REACHABLE = R(0x18),
TCM_TOO_MANY_TARGET_DESCS = R(0x19),
TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE = R(0x1a),
TCM_TOO_MANY_SEGMENT_DESCS = R(0x1b),
TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE = R(0x1c),
TCM_INSUFFICIENT_REGISTRATION_RESOURCES = R(0x1d),
#undef R
};
enum target_sc_flags_table {
TARGET_SCF_BIDI_OP = 0x01,
TARGET_SCF_ACK_KREF = 0x02,
TARGET_SCF_UNKNOWN_SIZE = 0x04,
TARGET_SCF_USE_CPUID = 0x08,
TARGET_SCF_LOOKUP_LUN_FROM_TAG = 0x10,
};
/* fabric independent task management function values */
enum tcm_tmreq_table {
TMR_ABORT_TASK = 1,
TMR_ABORT_TASK_SET = 2,
TMR_CLEAR_ACA = 3,
TMR_CLEAR_TASK_SET = 4,
TMR_LUN_RESET = 5,
TMR_TARGET_WARM_RESET = 6,
TMR_TARGET_COLD_RESET = 7,
TMR_UNKNOWN = 0xff,
};
/* fabric independent task management response values */
enum tcm_tmrsp_table {
TMR_FUNCTION_FAILED = 0,
TMR_FUNCTION_COMPLETE = 1,
TMR_TASK_DOES_NOT_EXIST = 2,
TMR_LUN_DOES_NOT_EXIST = 3,
TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 4,
TMR_FUNCTION_REJECTED = 5,
};
/*
* Used for target SCSI statistics
*/
typedef enum {
SCSI_INST_INDEX,
SCSI_AUTH_INTR_INDEX,
SCSI_INDEX_TYPE_MAX
} scsi_index_t;
struct se_cmd;
struct t10_alua_lba_map_member {
struct list_head lba_map_mem_list;
int lba_map_mem_alua_state;
int lba_map_mem_alua_pg_id;
};
struct t10_alua_lba_map {
u64 lba_map_first_lba;
u64 lba_map_last_lba;
struct list_head lba_map_list;
struct list_head lba_map_mem_list;
};
struct t10_alua {
/* ALUA Target Port Group ID */
u16 alua_tg_pt_gps_counter;
u32 alua_tg_pt_gps_count;
/* Referrals support */
spinlock_t lba_map_lock;
u32 lba_map_segment_size;
u32 lba_map_segment_multiplier;
struct list_head lba_map_list;
spinlock_t tg_pt_gps_lock;
struct se_device *t10_dev;
/* Used for default ALUA Target Port Group */
struct t10_alua_tg_pt_gp *default_tg_pt_gp;
/* Used for default ALUA Target Port Group ConfigFS group */
struct config_group alua_tg_pt_gps_group;
struct list_head tg_pt_gps_list;
};
struct t10_alua_lu_gp {
u16 lu_gp_id;
int lu_gp_valid_id;
u32 lu_gp_members;
atomic_t lu_gp_ref_cnt;
spinlock_t lu_gp_lock;
struct config_group lu_gp_group;
2011-07-19 16:55:10 +08:00
struct list_head lu_gp_node;
struct list_head lu_gp_mem_list;
};
struct t10_alua_lu_gp_member {
bool lu_gp_assoc;
atomic_t lu_gp_mem_ref_cnt;
spinlock_t lu_gp_mem_lock;
struct t10_alua_lu_gp *lu_gp;
struct se_device *lu_gp_mem_dev;
struct list_head lu_gp_mem_list;
};
struct t10_alua_tg_pt_gp {
u16 tg_pt_gp_id;
int tg_pt_gp_valid_id;
int tg_pt_gp_alua_supported_states;
int tg_pt_gp_alua_access_status;
int tg_pt_gp_alua_access_type;
int tg_pt_gp_nonop_delay_msecs;
int tg_pt_gp_trans_delay_msecs;
int tg_pt_gp_implicit_trans_secs;
int tg_pt_gp_pref;
int tg_pt_gp_write_metadata;
u32 tg_pt_gp_members;
int tg_pt_gp_alua_access_state;
atomic_t tg_pt_gp_ref_cnt;
spinlock_t tg_pt_gp_lock;
struct mutex tg_pt_gp_transition_mutex;
struct se_device *tg_pt_gp_dev;
struct config_group tg_pt_gp_group;
struct list_head tg_pt_gp_list;
struct list_head tg_pt_gp_lun_list;
struct se_lun *tg_pt_gp_alua_lun;
struct se_node_acl *tg_pt_gp_alua_nacl;
};
struct t10_vpd {
unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
int protocol_identifier_set;
u32 protocol_identifier;
u32 device_identifier_code_set;
u32 association;
u32 device_identifier_type;
struct list_head vpd_list;
};
struct t10_wwn {
2011-07-19 16:55:10 +08:00
char vendor[8];
char model[16];
char revision[4];
char unit_serial[INQUIRY_VPD_SERIAL_LEN];
spinlock_t t10_vpd_lock;
struct se_device *t10_dev;
struct config_group t10_wwn_group;
struct list_head t10_vpd_list;
};
struct t10_pr_registration {
/* Used for fabrics that contain WWN+ISID */
#define PR_REG_ISID_LEN 16
/* PR_REG_ISID_LEN + ',i,0x' */
#define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5)
char pr_reg_isid[PR_REG_ISID_LEN];
/* Used during APTPL metadata reading */
#define PR_APTPL_MAX_IPORT_LEN 256
unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
/* Used during APTPL metadata reading */
#define PR_APTPL_MAX_TPORT_LEN 256
unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
u16 pr_aptpl_rpti;
u16 pr_reg_tpgt;
/* Reservation effects all target ports */
int pr_reg_all_tg_pt;
/* Activate Persistence across Target Power Loss */
int pr_reg_aptpl;
int pr_res_holder;
int pr_res_type;
int pr_res_scope;
/* Used for fabric initiator WWPNs using a ISID */
bool isid_present_at_reg;
u64 pr_res_mapped_lun;
u64 pr_aptpl_target_lun;
u16 tg_pt_sep_rtpi;
u32 pr_res_generation;
u64 pr_reg_bin_isid;
u64 pr_res_key;
atomic_t pr_res_holders;
struct se_node_acl *pr_reg_nacl;
/* Used by ALL_TG_PT=1 registration with deve->pr_ref taken */
struct se_dev_entry *pr_reg_deve;
struct list_head pr_reg_list;
struct list_head pr_reg_abort_list;
struct list_head pr_reg_aptpl_list;
struct list_head pr_reg_atp_list;
struct list_head pr_reg_atp_mem_list;
};
2011-07-19 16:55:10 +08:00
struct t10_reservation {
/* Reservation effects all target ports */
int pr_all_tg_pt;
/* Activate Persistence across Target Power Loss enabled
* for SCSI device */
int pr_aptpl_active;
#define PR_APTPL_BUF_LEN 262144
u32 pr_generation;
spinlock_t registration_lock;
spinlock_t aptpl_reg_lock;
/*
* This will always be set by one individual I_T Nexus.
* However with all_tg_pt=1, other I_T Nexus from the
* same initiator can access PR reg/res info on a different
* target port.
*
* There is also the 'All Registrants' case, where there is
* a single *pr_res_holder of the reservation, but all
* registrations are considered reservation holders.
*/
struct se_node_acl *pr_res_holder;
struct list_head registration_list;
struct list_head aptpl_reg_list;
};
struct se_tmr_req {
/* Task Management function to be performed */
u8 function;
/* Task Management response to send */
u8 response;
int call_transport;
/* Reference to ITT that Task Mgmt should be performed */
u64 ref_task_tag;
void *fabric_tmr_ptr;
struct se_cmd *task_cmd;
struct se_device *tmr_dev;
struct list_head tmr_list;
};
enum target_prot_op {
TARGET_PROT_NORMAL = 0,
TARGET_PROT_DIN_INSERT = (1 << 0),
TARGET_PROT_DOUT_INSERT = (1 << 1),
TARGET_PROT_DIN_STRIP = (1 << 2),
TARGET_PROT_DOUT_STRIP = (1 << 3),
TARGET_PROT_DIN_PASS = (1 << 4),
TARGET_PROT_DOUT_PASS = (1 << 5),
};
#define TARGET_PROT_ALL TARGET_PROT_DIN_INSERT | TARGET_PROT_DOUT_INSERT | \
TARGET_PROT_DIN_STRIP | TARGET_PROT_DOUT_STRIP | \
TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS
enum target_prot_type {
TARGET_DIF_TYPE0_PROT,
TARGET_DIF_TYPE1_PROT,
TARGET_DIF_TYPE2_PROT,
TARGET_DIF_TYPE3_PROT,
};
enum target_core_dif_check {
TARGET_DIF_CHECK_GUARD = 0x1 << 0,
TARGET_DIF_CHECK_APPTAG = 0x1 << 1,
TARGET_DIF_CHECK_REFTAG = 0x1 << 2,
};
/* for sam_task_attr */
#define TCM_SIMPLE_TAG 0x20
#define TCM_HEAD_TAG 0x21
#define TCM_ORDERED_TAG 0x22
#define TCM_ACA_TAG 0x24
struct se_cmd {
/* SAM response code being sent to initiator */
u8 scsi_status;
u8 scsi_asc;
u8 scsi_ascq;
u16 scsi_sense_length;
unsigned cmd_wait_set:1;
unsigned unknown_data_length:1;
bool state_active:1;
u64 tag; /* SAM command identifier aka task tag */
/* Delay for ALUA Active/NonOptimized state access in milliseconds */
int alua_nonop_delay;
/* See include/linux/dma-mapping.h */
enum dma_data_direction data_direction;
/* For SAM Task Attribute */
int sam_task_attr;
/* Used for se_sess->sess_tag_pool */
unsigned int map_tag;
/* Transport protocol dependent state, see transport_state_table */
enum transport_state_table t_state;
/* See se_cmd_flags_table */
u32 se_cmd_flags;
/* Total size in bytes associated with command */
u32 data_length;
u32 residual_count;
u64 orig_fe_lun;
/* Persistent Reservation key */
u64 pr_res_key;
/* Used for sense data */
void *sense_buffer;
struct list_head se_delayed_node;
struct list_head se_qf_node;
struct se_device *se_dev;
struct se_lun *se_lun;
/* Only used for internal passthrough and legacy TCM fabric modules */
struct se_session *se_sess;
struct se_tmr_req *se_tmr_req;
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-03 12:52:08 +08:00
struct list_head se_cmd_list;
struct completion cmd_wait_comp;
const struct target_core_fabric_ops *se_tfo;
sense_reason_t (*execute_cmd)(struct se_cmd *);
sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool, int *);
void *protocol_data;
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-03 08:12:10 +08:00
unsigned char *t_task_cdb;
unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
unsigned long long t_task_lba;
unsigned int t_task_nolb;
unsigned int transport_state;
#define CMD_T_ABORTED (1 << 0)
#define CMD_T_ACTIVE (1 << 1)
#define CMD_T_COMPLETE (1 << 2)
#define CMD_T_SENT (1 << 4)
#define CMD_T_STOP (1 << 5)
#define CMD_T_TAS (1 << 10)
#define CMD_T_FABRIC_STOP (1 << 11)
#define CMD_T_PRE_EXECUTE (1 << 12)
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-03 08:12:10 +08:00
spinlock_t t_state_lock;
struct kref cmd_kref;
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-03 08:12:10 +08:00
struct completion t_transport_stop_comp;
struct work_struct work;
struct scatterlist *t_data_sg;
struct scatterlist *t_data_sg_orig;
unsigned int t_data_nents;
unsigned int t_data_nents_orig;
void *t_data_vmap;
struct scatterlist *t_bidi_data_sg;
unsigned int t_bidi_data_nents;
/* Used for lun->lun_ref counting */
int lun_ref_active;
struct list_head state_list;
/* backend private data */
void *priv;
/* DIF related members */
enum target_prot_op prot_op;
enum target_prot_type prot_type;
u8 prot_checks;
bool prot_pto;
u32 prot_length;
u32 reftag_seed;
struct scatterlist *t_prot_sg;
unsigned int t_prot_nents;
sense_reason_t pi_err;
sector_t bad_sector;
int cpuid;
};
struct se_ua {
u8 ua_asc;
u8 ua_ascq;
struct list_head ua_nacl_list;
};
struct se_node_acl {
char initiatorname[TRANSPORT_IQN_LEN];
/* Used to signal demo mode created ACL, disabled by default */
bool dynamic_node_acl;
bool dynamic_stop;
u32 queue_depth;
u32 acl_index;
enum target_prot_type saved_prot_type;
#define MAX_ACL_TAG_SIZE 64
char acl_tag[MAX_ACL_TAG_SIZE];
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t acl_pr_ref_count;
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
struct hlist_head lun_entry_hlist;
struct se_session *nacl_sess;
struct se_portal_group *se_tpg;
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
struct mutex lun_entry_mutex;
spinlock_t nacl_sess_lock;
struct config_group acl_group;
struct config_group acl_attrib_group;
struct config_group acl_auth_group;
struct config_group acl_param_group;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 19:06:11 +08:00
struct config_group acl_fabric_stat_group;
struct list_head acl_list;
struct list_head acl_sess_list;
struct completion acl_free_comp;
struct kref acl_kref;
};
static inline struct se_node_acl *acl_to_nacl(struct config_item *item)
{
return container_of(to_config_group(item), struct se_node_acl,
acl_group);
}
static inline struct se_node_acl *attrib_to_nacl(struct config_item *item)
{
return container_of(to_config_group(item), struct se_node_acl,
acl_attrib_group);
}
static inline struct se_node_acl *auth_to_nacl(struct config_item *item)
{
return container_of(to_config_group(item), struct se_node_acl,
acl_auth_group);
}
static inline struct se_node_acl *param_to_nacl(struct config_item *item)
{
return container_of(to_config_group(item), struct se_node_acl,
acl_param_group);
}
static inline struct se_node_acl *fabric_stat_to_nacl(struct config_item *item)
{
return container_of(to_config_group(item), struct se_node_acl,
acl_fabric_stat_group);
}
struct se_session {
unsigned sess_tearing_down:1;
u64 sess_bin_isid;
enum target_prot_op sup_prot_ops;
enum target_prot_type sess_prot_type;
struct se_node_acl *se_node_acl;
struct se_portal_group *se_tpg;
void *fabric_sess_ptr;
struct list_head sess_list;
struct list_head sess_acl_list;
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-03 12:52:08 +08:00
struct list_head sess_cmd_list;
struct list_head sess_wait_list;
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-03 12:52:08 +08:00
spinlock_t sess_cmd_lock;
void *sess_cmd_map;
struct percpu_ida sess_tag_pool;
};
struct se_device;
struct se_transform_info;
struct scatterlist;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 19:06:11 +08:00
struct se_ml_stat_grps {
struct config_group stat_group;
struct config_group scsi_auth_intr_group;
struct config_group scsi_att_intr_port_group;
};
struct se_lun_acl {
u64 mapped_lun;
struct se_node_acl *se_lun_nacl;
struct se_lun *se_lun;
struct config_group se_lun_group;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 19:06:11 +08:00
struct se_ml_stat_grps ml_stat_grps;
};
struct se_dev_entry {
u64 mapped_lun;
u64 pr_res_key;
u64 creation_time;
bool lun_access_ro;
u32 attach_count;
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
atomic_long_t total_cmds;
atomic_long_t read_bytes;
atomic_long_t write_bytes;
atomic_t ua_count;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
struct kref pr_kref;
struct completion pr_comp;
struct se_lun_acl __rcu *se_lun_acl;
spinlock_t ua_lock;
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
struct se_lun __rcu *se_lun;
#define DEF_PR_REG_ACTIVE 1
unsigned long deve_flags;
struct list_head alua_port_list;
struct list_head lun_link;
struct list_head ua_list;
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
struct hlist_node link;
struct rcu_head rcu_head;
};
struct se_dev_attrib {
int emulate_model_alias;
int emulate_dpo;
int emulate_fua_write;
int emulate_fua_read;
int emulate_write_cache;
int emulate_ua_intlck_ctrl;
int emulate_tas;
int emulate_tpu;
int emulate_tpws;
int emulate_caw;
int emulate_3pc;
int pi_prot_format;
enum target_prot_type pi_prot_type;
enum target_prot_type hw_pi_prot_type;
int pi_prot_verify;
int enforce_pr_isids;
int force_pr_aptpl;
int is_nonrot;
int emulate_rest_reord;
int unmap_zeroes_data;
u32 hw_block_size;
u32 block_size;
u32 hw_max_sectors;
u32 optimal_sectors;
u32 hw_queue_depth;
u32 queue_depth;
u32 max_unmap_lba_count;
u32 max_unmap_block_desc_count;
u32 unmap_granularity;
u32 unmap_granularity_alignment;
u32 max_write_same_len;
u32 max_bytes_per_io;
struct se_device *da_dev;
struct config_group da_group;
};
struct se_port_stat_grps {
struct config_group stat_group;
struct config_group scsi_port_group;
struct config_group scsi_tgt_port_group;
struct config_group scsi_transport_group;
};
struct scsi_port_stats {
atomic_long_t cmd_pdus;
atomic_long_t tx_data_octets;
atomic_long_t rx_data_octets;
};
struct se_lun {
u64 unpacked_lun;
bool lun_shutdown;
bool lun_access_ro;
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 11:42:19 +08:00
u32 lun_index;
/* RELATIVE TARGET PORT IDENTIFER */
u16 lun_rtpi;
atomic_t lun_acl_count;
struct se_device __rcu *lun_se_dev;
struct list_head lun_deve_list;
spinlock_t lun_deve_lock;
/* ALUA state */
int lun_tg_pt_secondary_stat;
int lun_tg_pt_secondary_write_md;
atomic_t lun_tg_pt_secondary_offline;
struct mutex lun_tg_pt_md_mutex;
/* ALUA target port group linkage */
struct list_head lun_tg_pt_gp_link;
struct t10_alua_tg_pt_gp *lun_tg_pt_gp;
spinlock_t lun_tg_pt_gp_lock;
struct se_portal_group *lun_tpg;
struct scsi_port_stats lun_stats;
struct config_group lun_group;
struct se_port_stat_grps port_stat_grps;
struct completion lun_ref_comp;
target: Fix NULL dereference during LUN lookup + active I/O shutdown When transport_clear_lun_ref() is shutting down a se_lun via configfs with new I/O in-flight, it's possible to trigger a NULL pointer dereference in transport_lookup_cmd_lun() due to the fact percpu_ref_get() doesn't do any __PERCPU_REF_DEAD checking before incrementing lun->lun_ref.count after lun->lun_ref has switched to atomic_t mode. This results in a NULL pointer dereference as LUN shutdown code in core_tpg_remove_lun() continues running after the existing ->release() -> core_tpg_lun_ref_release() callback completes, and clears the RCU protected se_lun->lun_se_dev pointer. During the OOPs, the state of lun->lun_ref in the process which triggered the NULL pointer dereference looks like the following on v4.1.y stable code: struct se_lun { lun_link_magic = 4294932337, lun_status = TRANSPORT_LUN_STATUS_FREE, ..... lun_se_dev = 0x0, lun_sep = 0x0, ..... lun_ref = { count = { counter = 1 }, percpu_count_ptr = 3, release = 0xffffffffa02fa1e0 <core_tpg_lun_ref_release>, confirm_switch = 0x0, force_atomic = false, rcu = { next = 0xffff88154fa1a5d0, func = 0xffffffff8137c4c0 <percpu_ref_switch_to_atomic_rcu> } } } To address this bug, use percpu_ref_tryget_live() to ensure once __PERCPU_REF_DEAD is visable on all CPUs and ->lun_ref has switched to atomic_t, all new I/Os will fail to obtain a new lun->lun_ref reference. Also use an explicit percpu_ref_kill_and_confirm() callback to block on ->lun_ref_comp to allow the first stage and associated RCU grace period to complete, and then block on ->lun_ref_shutdown waiting for the final percpu_ref_put() to drop the last reference via transport_lun_remove_cmd() before continuing with core_tpg_remove_lun() shutdown. Reported-by: Rob Millner <rlm@daterainc.com> Tested-by: Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Tested-by: Vaibhav Tandon <vst@datera.io> Cc: Vaibhav Tandon <vst@datera.io> Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-23 14:06:32 +08:00
struct completion lun_shutdown_comp;
struct percpu_ref lun_ref;
struct list_head lun_dev_link;
struct hlist_node link;
struct rcu_head rcu_head;
};
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 19:06:11 +08:00
struct se_dev_stat_grps {
struct config_group stat_group;
struct config_group scsi_dev_group;
struct config_group scsi_tgt_dev_group;
struct config_group scsi_lu_group;
};
struct se_device {
/* RELATIVE TARGET PORT IDENTIFER Counter */
u16 dev_rpti_counter;
/* Used for SAM Task Attribute ordering */
u32 dev_cur_ordered_id;
u32 dev_flags;
#define DF_CONFIGURED 0x00000001
#define DF_FIRMWARE_VPD_UNIT_SERIAL 0x00000002
#define DF_EMULATED_VPD_UNIT_SERIAL 0x00000004
#define DF_USING_UDEV_PATH 0x00000008
#define DF_USING_ALIAS 0x00000010
#define DF_READ_ONLY 0x00000020
/* Physical device queue depth */
u32 queue_depth;
/* Used for SPC-2 reservations enforce of ISIDs */
u64 dev_res_bin_isid;
/* Pointer to transport specific device structure */
u32 dev_index;
u64 creation_time;
atomic_long_t num_resets;
atomic_long_t aborts_complete;
atomic_long_t aborts_no_task;
atomic_long_t num_cmds;
atomic_long_t read_bytes;
atomic_long_t write_bytes;
/* Active commands on this virtual SE device */
atomic_t simple_cmds;
atomic_t dev_ordered_sync;
atomic_t dev_qf_count;
u32 export_count;
spinlock_t delayed_cmd_lock;
spinlock_t execute_task_lock;
spinlock_t dev_reservation_lock;
unsigned int dev_reservation_flags;
#define DRF_SPC2_RESERVATIONS 0x00000001
#define DRF_SPC2_RESERVATIONS_WITH_ISID 0x00000002
spinlock_t se_port_lock;
spinlock_t se_tmr_lock;
spinlock_t qf_cmd_lock;
target: Add support for COMPARE_AND_WRITE emulation This patch adds support for COMPARE_AND_WRITE emulation on a per block basis. This logic is used as an atomic test and set primative currently used by VMWare ESX VAAI for performing array side locking of individual VMFS extent ownership. This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(), and does the majority of the work within the compare_and_write_callback() to perform the verify instance user data comparision, and subsequent write instance user data I/O submission upon a successfull comparision. The synchronization is enforced by se_device->caw_sem, that is obtained before the initial READ I/O submission in sbc_compare_and_write(). The mutex is then released upon MISCOMPARE in compare_and_write_callback(), or upon WRITE instance user-data completion in compare_and_write_post(). The implementation currently assumes a single logical block (NoLB=1). v4 changes: - Explicitly clear cmd->transport_complete_callback for two failure cases in sbc_compare_and_write() in order to avoid double unlock of ->caw_sem in compare_and_write_callback() (Dan Carpenter) v3 changes: - Convert se_device->caw_mutex to ->caw_sem v2 changes: - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to sbc_compare_and_write() during setup in sbc_parse_cdb() - Use sbc_compare_and_write() for initial READ submission with DMA_FROM_DEVICE - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance user-data in compare_and_write_callback() - Drop SCF_BIDI command flag usage - Set TRANSPORT_PROCESSING + transport_state flags before write instance submission, and convert to __target_execute_cmd() - Prevent sbc_get_size() from being being called twice to generate incorrect size in sbc_parse_cdb() - Enforce se_device->caw_mutex synchronization between initial READ I/O submission, and final WRITE I/O completion. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-20 06:20:28 +08:00
struct semaphore caw_sem;
/* Used for legacy SPC-2 reservationsa */
struct se_node_acl *dev_reserved_node_acl;
/* Used for ALUA Logical Unit Group membership */
struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
/* Used for SPC-3 Persistent Reservations */
struct t10_pr_registration *dev_pr_res_holder;
struct list_head dev_sep_list;
struct list_head dev_tmr_list;
struct workqueue_struct *tmr_wq;
struct work_struct qf_work_queue;
struct list_head delayed_cmd_list;
struct list_head state_list;
struct list_head qf_cmd_list;
/* Pointer to associated SE HBA */
struct se_hba *se_hba;
/* T10 Inquiry and VPD WWN Information */
struct t10_wwn t10_wwn;
/* T10 Asymmetric Logical Unit Assignment for Target Ports */
struct t10_alua t10_alua;
/* T10 SPC-2 + SPC-3 Reservations */
struct t10_reservation t10_pr;
struct se_dev_attrib dev_attrib;
struct config_group dev_group;
struct config_group dev_pr_group;
struct se_dev_stat_grps dev_stat_grps;
#define SE_DEV_ALIAS_LEN 512 /* must be less than PAGE_SIZE */
unsigned char dev_alias[SE_DEV_ALIAS_LEN];
#define SE_UDEV_PATH_LEN 512 /* must be less than PAGE_SIZE */
unsigned char udev_path[SE_UDEV_PATH_LEN];
/* Pointer to template of function pointers for transport */
const struct target_backend_ops *transport;
struct se_lun xcopy_lun;
/* Protection Information */
int prot_length;
/* For se_lun->lun_se_dev RCU read-side critical access */
u32 hba_index;
struct rcu_head rcu_head;
};
struct se_hba {
u16 hba_tpgt;
u32 hba_id;
/* See hba_flags_table */
u32 hba_flags;
/* Virtual iSCSI devices attached. */
u32 dev_count;
u32 hba_index;
/* Pointer to transport specific host structure. */
void *hba_ptr;
2011-07-19 16:55:10 +08:00
struct list_head hba_node;
spinlock_t device_lock;
struct config_group hba_group;
struct mutex hba_access_mutex;
struct target_backend *backend;
};
struct se_tpg_np {
struct se_portal_group *tpg_np_parent;
struct config_group tpg_np_group;
};
static inline struct se_tpg_np *to_tpg_np(struct config_item *item)
{
return container_of(to_config_group(item), struct se_tpg_np,
tpg_np_group);
}
struct se_portal_group {
/*
* PROTOCOL IDENTIFIER value per SPC4, 7.5.1.
*
* Negative values can be used by fabric drivers for internal use TPGs.
*/
int proto_id;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t tpg_pr_ref_count;
/* Spinlock for adding/removing ACLed Nodes */
struct mutex acl_node_mutex;
/* Spinlock for adding/removing sessions */
spinlock_t session_lock;
struct mutex tpg_lun_mutex;
2011-07-19 16:55:10 +08:00
struct list_head se_tpg_node;
/* linked list for initiator ACL list */
struct list_head acl_node_list;
struct hlist_head tpg_lun_hlist;
struct se_lun *tpg_virt_lun0;
/* List of TCM sessions associated wth this TPG */
struct list_head tpg_sess_list;
/* Pointer to $FABRIC_MOD dependent code */
const struct target_core_fabric_ops *se_tpg_tfo;
struct se_wwn *se_tpg_wwn;
struct config_group tpg_group;
struct config_group tpg_lun_group;
struct config_group tpg_np_group;
struct config_group tpg_acl_group;
struct config_group tpg_attrib_group;
struct config_group tpg_auth_group;
struct config_group tpg_param_group;
};
static inline struct se_portal_group *to_tpg(struct config_item *item)
{
return container_of(to_config_group(item), struct se_portal_group,
tpg_group);
}
static inline struct se_portal_group *attrib_to_tpg(struct config_item *item)
{
return container_of(to_config_group(item), struct se_portal_group,
tpg_attrib_group);
}
static inline struct se_portal_group *auth_to_tpg(struct config_item *item)
{
return container_of(to_config_group(item), struct se_portal_group,
tpg_auth_group);
}
static inline struct se_portal_group *param_to_tpg(struct config_item *item)
{
return container_of(to_config_group(item), struct se_portal_group,
tpg_param_group);
}
struct se_wwn {
struct target_fabric_configfs *wwn_tf;
void *priv;
struct config_group wwn_group;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 19:06:11 +08:00
struct config_group fabric_stat_group;
};
static inline void atomic_inc_mb(atomic_t *v)
{
smp_mb__before_atomic();
atomic_inc(v);
smp_mb__after_atomic();
}
static inline void atomic_dec_mb(atomic_t *v)
{
smp_mb__before_atomic();
atomic_dec(v);
smp_mb__after_atomic();
}
#endif /* TARGET_CORE_BASE_H */