linux-sg2042/include/scsi/fcoe_sysfs.h

122 lines
3.1 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23 10:06:21 +08:00
/*
* Copyright (c) 2011-2012 Intel Corporation. All rights reserved.
*
* Maintained at www.Open-FCoE.org
*/
#ifndef FCOE_SYSFS
#define FCOE_SYSFS
#include <linux/if_ether.h>
#include <linux/device.h>
#include <scsi/fc/fc_fcoe.h>
struct fcoe_ctlr_device;
struct fcoe_fcf_device;
struct fcoe_sysfs_function_template {
void (*get_fcoe_ctlr_link_fail)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_vlink_fail)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_miss_fka)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_symb_err)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_err_block)(struct fcoe_ctlr_device *);
void (*get_fcoe_ctlr_fcs_error)(struct fcoe_ctlr_device *);
libfcoe, fcoe, bnx2fc: Add new fcoe control interface This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-11-27 14:53:30 +08:00
void (*set_fcoe_ctlr_mode)(struct fcoe_ctlr_device *);
int (*set_fcoe_ctlr_enabled)(struct fcoe_ctlr_device *);
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23 10:06:21 +08:00
void (*get_fcoe_fcf_selected)(struct fcoe_fcf_device *);
void (*get_fcoe_fcf_vlan_id)(struct fcoe_fcf_device *);
};
#define dev_to_ctlr(d) \
container_of((d), struct fcoe_ctlr_device, dev)
enum fip_conn_type {
FIP_CONN_TYPE_UNKNOWN,
FIP_CONN_TYPE_FABRIC,
FIP_CONN_TYPE_VN2VN,
};
libfcoe, fcoe, bnx2fc: Add new fcoe control interface This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-11-27 14:53:30 +08:00
enum ctlr_enabled_state {
FCOE_CTLR_ENABLED,
FCOE_CTLR_DISABLED,
FCOE_CTLR_UNUSED,
};
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23 10:06:21 +08:00
struct fcoe_ctlr_device {
u32 id;
struct device dev;
struct fcoe_sysfs_function_template *f;
struct list_head fcfs;
char work_q_name[20];
struct workqueue_struct *work_q;
char devloss_work_q_name[20];
struct workqueue_struct *devloss_work_q;
struct mutex lock;
int fcf_dev_loss_tmo;
enum fip_conn_type mode;
libfcoe, fcoe, bnx2fc: Add new fcoe control interface This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-11-27 14:53:30 +08:00
enum ctlr_enabled_state enabled;
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23 10:06:21 +08:00
/* expected in host order for displaying */
struct fcoe_fc_els_lesb lesb;
};
static inline void *fcoe_ctlr_device_priv(const struct fcoe_ctlr_device *ctlr)
{
return (void *)(ctlr + 1);
}
/* fcf states */
enum fcf_state {
FCOE_FCF_STATE_UNKNOWN,
FCOE_FCF_STATE_DISCONNECTED,
FCOE_FCF_STATE_CONNECTED,
FCOE_FCF_STATE_DELETED,
};
struct fcoe_fcf_device {
u32 id;
struct device dev;
struct list_head peers;
struct work_struct delete_work;
struct delayed_work dev_loss_work;
u32 dev_loss_tmo;
void *priv;
enum fcf_state state;
u64 fabric_name;
u64 switch_name;
u32 fc_map;
u16 vfid;
u8 mac[ETH_ALEN];
u8 priority;
u32 fka_period;
u8 selected;
u16 vlan_id;
};
#define dev_to_fcf(d) \
container_of((d), struct fcoe_fcf_device, dev)
/* parentage should never be missing */
#define fcoe_fcf_dev_to_ctlr_dev(x) \
dev_to_ctlr((x)->dev.parent)
#define fcoe_fcf_device_priv(x) \
((x)->priv)
struct fcoe_ctlr_device *fcoe_ctlr_device_add(struct device *parent,
struct fcoe_sysfs_function_template *f,
int priv_size);
void fcoe_ctlr_device_delete(struct fcoe_ctlr_device *);
struct fcoe_fcf_device *fcoe_fcf_device_add(struct fcoe_ctlr_device *,
struct fcoe_fcf_device *);
void fcoe_fcf_device_delete(struct fcoe_fcf_device *);
int __init fcoe_sysfs_setup(void);
void __exit fcoe_sysfs_teardown(void);
#endif /* FCOE_SYSFS */