hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/include/linux/ceph/osd_client.h

360 lines
11 KiB
C
Raw Normal View History

ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
#ifndef _FS_CEPH_OSD_CLIENT_H
#define _FS_CEPH_OSD_CLIENT_H
#include <linux/completion.h>
ceph: use kref for ceph_osd_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 05:37:03 +08:00
#include <linux/kref.h>
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
#include <linux/mempool.h>
#include <linux/rbtree.h>
ceph: define ceph_auth_handshake type The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:38 +08:00
#include <linux/ceph/types.h>
#include <linux/ceph/osdmap.h>
#include <linux/ceph/messenger.h>
#include <linux/ceph/auth.h>
libceph: always allow trail in osd request An osd request structure contains an optional trail portion, which if present will contain data to be passed in the payload portion of the message containing the request. The trail field is a ceph_pagelist pointer, and if null it indicates there is no trail. A ceph_pagelist structure contains a length field, and it can legitimately hold value 0. Make use of this to change the interpretation of the "trail" of an osd request so that every osd request has trailing data, it just might have length 0. This means we change the r_trail field in a ceph_osd_request structure from a pointer to a structure that is always initialized. Note that in ceph_osdc_start_request(), the trail pointer (or now address of that structure) is assigned to a ceph message's trail field. Here's why that's still OK (looking at net/ceph/messenger.c): - What would have resulted in a null pointer previously will now refer to a 0-length page list. That message trail pointer is used in two functions, write_partial_msg_pages() and out_msg_pos_next(). - In write_partial_msg_pages(), a null page list pointer is handled the same as a message with 0-length trail, and both result in a "in_trail" variable set to false. The trail pointer is only used if in_trail is true. - The only other place the message trail pointer is used is out_msg_pos_next(). That function is only called by write_partial_msg_pages() and only touches the trail pointer if the in_trail value it is passed is true. Therefore a null ceph_msg->trail pointer is equivalent to a non-null pointer referring to a 0-length page list structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-11-14 11:11:15 +08:00
#include <linux/ceph/pagelist.h>
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_msg;
struct ceph_snap_context;
struct ceph_osd_request;
struct ceph_osd_client;
ceph: negotiate authentication protocol; implement AUTH_NONE protocol When we open a monitor session, we send an initial AUTH message listing the auth protocols we support, our entity name, and (possibly) a previously assigned global_id. The monitor chooses a protocol and responds with an initial message. Initially implement AUTH_NONE, a dummy protocol that provides no security, but works within the new framework. It generates 'authorizers' that are used when connecting to (mds, osd) services that simply state our entity name and global_id. This is a wire protocol change. Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-19 08:19:57 +08:00
struct ceph_authorizer;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
/*
* completion callback for async writepages
*/
typedef void (*ceph_osdc_callback_t)(struct ceph_osd_request *,
struct ceph_msg *);
libceph: change how "safe" callback is used An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-04-16 00:20:42 +08:00
typedef void (*ceph_osdc_unsafe_callback_t)(struct ceph_osd_request *, bool);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
/* a given osd we're communicating with */
struct ceph_osd {
atomic_t o_ref;
struct ceph_osd_client *o_osdc;
int o_osd;
int o_incarnation;
struct rb_node o_node;
struct ceph_connection o_con;
struct list_head o_requests;
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
struct list_head o_linger_requests;
ceph: put unused osd connections on lru Instead of removing osd connection immediately when the requests list is empty, put the osd connection on an lru. Only if that osd has not been used for more than a specified time, will it be removed. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-04 03:00:26 +08:00
struct list_head o_osd_lru;
ceph: define ceph_auth_handshake type The definitions for the ceph_mds_session and ceph_osd both contain five fields related only to "authorizers." Encapsulate those fields into their own struct type, allowing for better isolation in some upcoming patches. Fix the #includes in "linux/ceph/osd_client.h" to lay out their more complete canonical path. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-05-17 04:16:38 +08:00
struct ceph_auth_handshake o_auth;
ceph: put unused osd connections on lru Instead of removing osd connection immediately when the requests list is empty, put the osd connection on an lru. Only if that osd has not been used for more than a specified time, will it be removed. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-04 03:00:26 +08:00
unsigned long lru_ttl;
ceph: reset osd after relevant messages timed out This simplifies the process of timing out messages. We keep lru of current messages that are in flight. If a timeout has passed, we reset the osd connection, so that messages will be retransmitted. This is a failsafe in case we hit some sort of problem sending out message to the OSD. Normally, we'll get notification via an updated osdmap if there are problems. If a request is older than the keepalive timeout, send a keepalive to ensure we detect any breaks in the TCP connection. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-27 07:32:31 +08:00
int o_marked_for_keepalive;
struct list_head o_keepalive_item;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
};
libceph: update osd request/reply encoding Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 08:11:12 +08:00
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
#define CEPH_OSD_MAX_OP 2
libceph: update osd request/reply encoding Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 08:11:12 +08:00
libceph: distinguish page and bio requests An osd request uses either pages or a bio list for its data. Use a union to record information about the two, and add a data type tag to select between them. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
enum ceph_osd_data_type {
libceph: set the data pointers when encoding ops Still using the osd request r_data_in and r_data_out pointer, but we're basically only referring to it via the data pointers in the osd ops. And we're transferring that information to the request or reply message only when the op indicates it's needed, in osd_req_encode_op(). To avoid a forward reference, ceph_osdc_msg_data_set() was moved up in the file. Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(), because the ops array will already be zeroed anyway. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
CEPH_OSD_DATA_TYPE_NONE = 0,
libceph: distinguish page and bio requests An osd request uses either pages or a bio list for its data. Use a union to record information about the two, and add a data type tag to select between them. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
CEPH_OSD_DATA_TYPE_PAGES,
libceph: have osd requests support pagelist data Add support for recording a ceph pagelist as data associated with an osd request. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-09 03:35:36 +08:00
CEPH_OSD_DATA_TYPE_PAGELIST,
libceph: distinguish page and bio requests An osd request uses either pages or a bio list for its data. Use a union to record information about the two, and add a data type tag to select between them. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
#ifdef CONFIG_BLOCK
CEPH_OSD_DATA_TYPE_BIO,
#endif /* CONFIG_BLOCK */
};
libceph: separate osd request data info Pull the fields in an osd request structure that define the data for the request out into a separate structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
struct ceph_osd_data {
libceph: distinguish page and bio requests An osd request uses either pages or a bio list for its data. Use a union to record information about the two, and add a data type tag to select between them. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
enum ceph_osd_data_type type;
union {
libceph: separate osd request data info Pull the fields in an osd request structure that define the data for the request out into a separate structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
struct {
struct page **pages;
libceph: record byte count not page count Record the byte count for an osd request rather than the page count. The number of pages can always be derived from the byte count (and alignment/offset) but the reverse is not true. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-08 05:38:25 +08:00
u64 length;
libceph: separate osd request data info Pull the fields in an osd request structure that define the data for the request out into a separate structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
u32 alignment;
bool pages_from_pool;
bool own_pages;
};
libceph: have osd requests support pagelist data Add support for recording a ceph pagelist as data associated with an osd request. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-09 03:35:36 +08:00
struct ceph_pagelist *pagelist;
libceph: separate osd request data info Pull the fields in an osd request structure that define the data for the request out into a separate structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
#ifdef CONFIG_BLOCK
libceph: record length of bio list with bio When assigning a bio pointer to an osd request, we don't have an efficient way of knowing the total length bytes in the bio list. That information is available at the point it's set up by the rbd code, so record it with the osd data when it's set. This and the next patch are related to maintaining the length of a message's data independent of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-15 03:09:06 +08:00
struct {
struct bio *bio; /* list of bios */
size_t bio_length; /* total in list */
};
libceph: separate osd request data info Pull the fields in an osd request structure that define the data for the request out into a separate structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15 02:16:43 +08:00
#endif /* CONFIG_BLOCK */
};
};
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
struct ceph_osd_req_op {
u16 op; /* CEPH_OSD_OP_* */
u32 payload_len;
union {
libceph: support raw data requests Allow osd request ops that aren't otherwise structured (not class, extent, or watch ops) to specify "raw" data to be used to hold incoming data for the op. Make use of this capability for the osd STAT op. Prefix the name of the private function osd_req_op_init() with "_", and expose a new function by that (earlier) name whose purpose is to initialize osd ops with (only) implied data. For now we'll just support the use of a page array for an osd op with incoming raw data. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-12 02:33:24 +08:00
struct ceph_osd_data raw_data_in;
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
struct {
u64 offset, length;
u64 truncate_size;
u32 truncate_seq;
libceph: kill off osd request r_data_in and r_data_out Finally! Convert the osd op data pointers into real structures, and make the switch over to using them instead of having all ops share the in and/or out data structures in the osd request. Set up a new function to traverse the set of ops and release any data associated with them (pages). This and the patches leading up to it resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct ceph_osd_data osd_data;
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
} extent;
struct {
const char *class_name;
const char *method_name;
libceph: kill off osd request r_data_in and r_data_out Finally! Convert the osd op data pointers into real structures, and make the switch over to using them instead of having all ops share the in and/or out data structures in the osd request. Set up a new function to traverse the set of ops and release any data associated with them (pages). This and the patches leading up to it resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct ceph_osd_data request_info;
libceph: make method call data be a separate data item Right now the data for a method call is specified via a pointer and length, and it's copied--along with the class and method name--into a pagelist data item to be sent to the osd. Instead, encode the data in a data item separate from the class and method names. This will allow large amounts of data to be supplied to methods without copying. Only rbd uses the class functionality right now, and when it really needs this it will probably need to use a page array rather than a page list. But this simple implementation demonstrates the functionality on the osd client, and that's enough for now. This resolves: http://tracker.ceph.com/issues/4104 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-06 03:46:02 +08:00
struct ceph_osd_data request_data;
libceph: kill off osd request r_data_in and r_data_out Finally! Convert the osd op data pointers into real structures, and make the switch over to using them instead of having all ops share the in and/or out data structures in the osd request. Set up a new function to traverse the set of ops and release any data associated with them (pages). This and the patches leading up to it resolve: http://tracker.ceph.com/issues/4657 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct ceph_osd_data response_data;
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
__u8 class_len;
__u8 method_len;
__u8 argc;
} cls;
struct {
u64 cookie;
u64 ver;
u32 prot_ver;
u32 timeout;
__u8 flag;
} watch;
};
};
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
/* an in-flight request */
struct ceph_osd_request {
u64 r_tid; /* unique for this client */
struct rb_node r_node;
ceph: reset osd after relevant messages timed out This simplifies the process of timing out messages. We keep lru of current messages that are in flight. If a timeout has passed, we reset the osd connection, so that messages will be retransmitted. This is a failsafe in case we hit some sort of problem sending out message to the OSD. Normally, we'll get notification via an updated osdmap if there are problems. If a request is older than the keepalive timeout, send a keepalive to ensure we detect any breaks in the TCP connection. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-27 07:32:31 +08:00
struct list_head r_req_lru_item;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct list_head r_osd_item;
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
struct list_head r_linger_item;
struct list_head r_linger_osd;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_osd *r_osd;
libceph: decode into cpu-native ceph_pg type Always decode data into our cpu-native ceph_pg type that has the correct field widths. Limit any remaining uses of ceph_pg_v1 to dealing with the legacy protocol. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-24 02:38:16 +08:00
struct ceph_pg r_pgid;
ceph: resubmit requests on pg mapping change (not just primary change) OSD requests need to be resubmitted on any pg mapping change, not just when the pg primary changes. Resending only when the primary changes results in occasional 'hung' requests during osd cluster recovery or rebalancing. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-11 01:24:48 +08:00
int r_pg_osds[CEPH_PG_MAX_SIZE];
int r_num_pg_osds;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_msg *r_request, *r_reply;
int r_flags; /* any additional flags for the osd */
u32 r_sent; /* >0 if r_request is sending/sent */
libceph: update osd request/reply encoding Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 08:11:12 +08:00
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
/* request osd ops array */
unsigned int r_num_ops;
struct ceph_osd_req_op r_ops[CEPH_OSD_MAX_OP];
libceph: update osd request/reply encoding Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 08:11:12 +08:00
/* these are updated on each send */
__le32 *r_request_osdmap_epoch;
__le32 *r_request_flags;
__le64 *r_request_pool;
void *r_request_pgid;
__le32 *r_request_attempts;
libceph: block I/O when PAUSE or FULL osd map flags are set The PAUSEWR and PAUSERD flags are meant to stop the cluster from processing writes and reads, respectively. The FULL flag is set when the cluster determines that it is out of space, and will no longer process writes. PAUSEWR and PAUSERD are purely client-side settings already implemented in userspace clients. The osd does nothing special with these flags. When the FULL flag is set, however, the osd responds to all writes with -ENOSPC. For cephfs, this makes sense, but for rbd the block layer translates this into EIO. If a cluster goes from full to non-full quickly, a filesystem on top of rbd will not behave well, since some writes succeed while others get EIO. Fix this by blocking any writes when the FULL flag is set in the osd client. This is the same strategy used by userspace, so apply it by default. A follow-on patch makes this configurable. __map_request() is called to re-target osd requests in case the available osds changed. Add a paused field to a ceph_osd_request, and set it whenever an appropriate osd map flag is set. Avoid queueing paused requests in __map_request(), but force them to be resent if they become unpaused. Also subscribe to the next osd map from the monitor if any of these flags are set, so paused requests can be unblocked as soon as possible. Fixes: http://tracker.ceph.com/issues/6079 Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-03 11:11:48 +08:00
bool r_paused;
libceph: update osd request/reply encoding Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 08:11:12 +08:00
struct ceph_eversion *r_request_reassert_version;
int r_result;
int r_reply_op_len[CEPH_OSD_MAX_OP];
s32 r_reply_op_result[CEPH_OSD_MAX_OP];
ceph: control access to page vector for incoming data When we issue an OSD read, we specify a vector of pages that the data is to be read into. The request may be sent multiple times, to multiple OSDs, if the osdmap changes, which means we can get more than one reply. Only read data into the page vector if the reply is coming from the OSD we last sent the request to. Keep track of which connection is using the vector by taking a reference. If another connection was already using the vector before and a new reply comes in on the right connection, revoke the pages from the other connection. Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-23 02:45:45 +08:00
int r_got_reply;
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
int r_linger;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_osd_client *r_osdc;
ceph: use kref for ceph_osd_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 05:37:03 +08:00
struct kref r_kref;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
bool r_mempool;
struct completion r_completion, r_safe_completion;
libceph: change how "safe" callback is used An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-04-16 00:20:42 +08:00
ceph_osdc_callback_t r_callback;
ceph_osdc_unsafe_callback_t r_unsafe_callback;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_eversion r_reassert_version;
struct list_head r_unsafe_item;
struct inode *r_inode; /* for use by callbacks */
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
void *r_priv; /* ditto */
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
libceph: start using oloc abstraction Instead of relying on pool fields in ceph_file_layout (for mapping) and ceph_pg (for enconding), start using ceph_object_locator (oloc) abstraction. Note that userspace oloc currently consists of pool, key, nspace and hash fields, while this one contains only a pool. This is OK, because at this point we only send (i.e. encode) olocs and never have to receive (i.e. decode) them. This makes keeping a copy of ceph_file_layout in every osd request unnecessary, so ceph_osd_request::r_file_layout field is nuked. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:40:18 +08:00
struct ceph_object_locator r_oloc;
libceph: introduce and start using oid abstraction In preparation for tiering support, which would require having two (base and target) object names for each osd request and also copying those names around, introduce struct ceph_object_id (oid) and a couple helpers to facilitate those copies and encapsulate the fact that object name is not necessarily a NUL-terminated string. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:40:18 +08:00
struct ceph_object_id r_oid;
libceph: start using oloc abstraction Instead of relying on pool fields in ceph_file_layout (for mapping) and ceph_pg (for enconding), start using ceph_object_locator (oloc) abstraction. Note that userspace oloc currently consists of pool, key, nspace and hash fields, while this one contains only a pool. This is OK, because at this point we only send (i.e. encode) olocs and never have to receive (i.e. decode) them. This makes keeping a copy of ceph_file_layout in every osd request unnecessary, so ceph_osd_request::r_file_layout field is nuked. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:40:18 +08:00
libceph: calculate placement based on the internal data types Instead of using the old ceph_object_layout struct, update our internal ceph_calc_object_layout method to use the ceph_pg type. This allows us to pass the full 32-bit precision of the pgid.seed to the callers. It also allows some callers to avoid reaching into the request structures for the struct ceph_object_layout fields. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 08:13:08 +08:00
u64 r_snapid;
ceph: rename r_sent_stamp r_stamp Make variable name slightly more generic, since it will (soon) reflect either the time the request was sent OR the time it was last determined to be still retrying. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-23 05:42:30 +08:00
unsigned long r_stamp; /* send OR check time */
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_snap_context *r_snapc; /* snap context for writes */
};
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
struct ceph_osd_event {
u64 cookie;
int one_shot;
struct ceph_osd_client *osdc;
void (*cb)(u64, u64, u8, void *);
void *data;
struct rb_node node;
struct list_head osd_node;
struct kref kref;
};
struct ceph_osd_event_work {
struct work_struct work;
struct ceph_osd_event *event;
u64 ver;
u64 notify_id;
u8 opcode;
};
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_osd_client {
struct ceph_client *client;
struct ceph_osdmap *osdmap; /* current map */
struct rw_semaphore map_sem;
struct completion map_waiters;
u64 last_requested_map;
struct mutex request_mutex;
struct rb_root osds; /* osds */
ceph: put unused osd connections on lru Instead of removing osd connection immediately when the requests list is empty, put the osd connection on an lru. Only if that osd has not been used for more than a specified time, will it be removed. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-04 03:00:26 +08:00
struct list_head osd_lru; /* idle osds */
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
u64 timeout_tid; /* tid of timeout triggering rq */
u64 last_tid; /* tid of last request */
struct rb_root requests; /* pending requests */
libceph: fix osd request queuing on osdmap updates If we send a request to osd A, and the request's pg remaps to osd B and then back to A in quick succession, we need to resend the request to A. The old code was only calling kick_requests after processing all incremental maps in a message, so it was very possible to not resend a request that needed to be resent. This would make the osd eventually time out (at least with the current default of osd timeouts enabled). The correct approach is to scan requests on every map incremental. This patch refactors the kick code in a few ways: - all requests are either on req_lru (in flight), req_unsent (ready to send), or req_notarget (currently map to no up osd) - mapping always done by map_request (previous map_osds) - if the mapping changes, we requeue. requests are resent only after all map incrementals are processed. - some osd reset code is moved out of kick_requests into a separate function - the "kick this osd" functionality is moved to kick_osd_requests, as it is unrelated to scanning for request->pg->osd mapping changes Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-18 12:34:08 +08:00
struct list_head req_lru; /* in-flight lru */
struct list_head req_unsent; /* unsent/need-resend queue */
struct list_head req_notarget; /* map to no osd */
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
struct list_head req_linger; /* lingering requests */
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
int num_requests;
struct delayed_work timeout_work;
ceph: put unused osd connections on lru Instead of removing osd connection immediately when the requests list is empty, put the osd connection on an lru. Only if that osd has not been used for more than a specified time, will it be removed. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-04 03:00:26 +08:00
struct delayed_work osds_timeout_work;
ceph: build cleanly without CONFIG_DEBUG_FS Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-13 07:05:52 +08:00
#ifdef CONFIG_DEBUG_FS
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct dentry *debugfs_file;
ceph: build cleanly without CONFIG_DEBUG_FS Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-13 07:05:52 +08:00
#endif
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
mempool_t *req_mempool;
ceph: keep reserved replies on the request structure This includes treating all the data preallocation and revokation at the same place, not having to have a special case for the reserved pages. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-01-14 09:03:23 +08:00
struct ceph_msgpool msgpool_op;
ceph: use single osd op reply msg Use a single ceph_msg for the osd reply, even when we are getting multiple replies. Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-02 05:02:00 +08:00
struct ceph_msgpool msgpool_op_reply;
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
spinlock_t event_lock;
struct rb_root event_tree;
u64 event_count;
struct workqueue_struct *notify_wq;
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
};
libceph: use slab cache for osd client requests Create a slab cache to manage allocation of ceph_osdc_request structures. This resolves: http://tracker.ceph.com/issues/3926 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 01:43:04 +08:00
extern int ceph_osdc_setup(void);
extern void ceph_osdc_cleanup(void);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
extern int ceph_osdc_init(struct ceph_osd_client *osdc,
struct ceph_client *client);
extern void ceph_osdc_stop(struct ceph_osd_client *osdc);
extern void ceph_osdc_handle_reply(struct ceph_osd_client *osdc,
struct ceph_msg *msg);
extern void ceph_osdc_handle_map(struct ceph_osd_client *osdc,
struct ceph_msg *msg);
libceph: support raw data requests Allow osd request ops that aren't otherwise structured (not class, extent, or watch ops) to specify "raw" data to be used to hold incoming data for the op. Make use of this capability for the osd STAT op. Prefix the name of the private function osd_req_op_init() with "_", and expose a new function by that (earlier) name whose purpose is to initialize osd ops with (only) implied data. For now we'll just support the use of a page array for an osd op with incoming raw data. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-12 02:33:24 +08:00
extern void osd_req_op_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode);
extern void osd_req_op_raw_data_in_pages(struct ceph_osd_request *,
unsigned int which,
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
libceph: specify osd op by index in request An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:11 +08:00
extern void osd_req_op_extent_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 09:50:00 +08:00
u64 offset, u64 length,
u64 truncate_size, u32 truncate_seq);
libceph: specify osd op by index in request An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:11 +08:00
extern void osd_req_op_extent_update(struct ceph_osd_request *osd_req,
unsigned int which, u64 length);
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
extern struct ceph_osd_data *osd_req_op_extent_osd_data(
struct ceph_osd_request *osd_req,
libceph: kill off osd data write_request parameters In the incremental move toward supporting distinct data items in an osd request some of the functions had "write_request" parameters to indicate, basically, whether the data belonged to in_data or the out_data. Now that we maintain the data fields in the op structure there is no need to indicate the direction, so get rid of the "write_request" parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-16 03:50:36 +08:00
unsigned int which);
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
extern struct ceph_osd_data *osd_req_op_cls_response_data(
struct ceph_osd_request *osd_req,
unsigned int which);
extern void osd_req_op_extent_osd_data_pages(struct ceph_osd_request *,
libceph: kill off osd data write_request parameters In the incremental move toward supporting distinct data items in an osd request some of the functions had "write_request" parameters to indicate, basically, whether the data belonged to in_data or the out_data. Now that we maintain the data fields in the op structure there is no need to indicate the direction, so get rid of the "write_request" parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-16 03:50:36 +08:00
unsigned int which,
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
extern void osd_req_op_extent_osd_data_pagelist(struct ceph_osd_request *,
libceph: kill off osd data write_request parameters In the incremental move toward supporting distinct data items in an osd request some of the functions had "write_request" parameters to indicate, basically, whether the data belonged to in_data or the out_data. Now that we maintain the data fields in the op structure there is no need to indicate the direction, so get rid of the "write_request" parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-16 03:50:36 +08:00
unsigned int which,
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct ceph_pagelist *pagelist);
#ifdef CONFIG_BLOCK
extern void osd_req_op_extent_osd_data_bio(struct ceph_osd_request *,
libceph: kill off osd data write_request parameters In the incremental move toward supporting distinct data items in an osd request some of the functions had "write_request" parameters to indicate, basically, whether the data belonged to in_data or the out_data. Now that we maintain the data fields in the op structure there is no need to indicate the direction, so get rid of the "write_request" parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-16 03:50:36 +08:00
unsigned int which,
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct bio *bio, size_t bio_length);
#endif /* CONFIG_BLOCK */
libceph: make method call data be a separate data item Right now the data for a method call is specified via a pointer and length, and it's copied--along with the class and method name--into a pagelist data item to be sent to the osd. Instead, encode the data in a data item separate from the class and method names. This will allow large amounts of data to be supplied to methods without copying. Only rbd uses the class functionality right now, and when it really needs this it will probably need to use a page array rather than a page list. But this simple implementation demonstrates the functionality on the osd client, and that's enough for now. This resolves: http://tracker.ceph.com/issues/4104 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-06 03:46:02 +08:00
extern void osd_req_op_cls_request_data_pagelist(struct ceph_osd_request *,
unsigned int which,
struct ceph_pagelist *pagelist);
libceph: support pages for class request data Add the ability to provide an array of pages as outbound request data for object class method calls. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-20 04:34:49 +08:00
extern void osd_req_op_cls_request_data_pages(struct ceph_osd_request *,
unsigned int which,
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
extern void osd_req_op_cls_response_data_pages(struct ceph_osd_request *,
libceph: specify osd op by index in request An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:11 +08:00
unsigned int which,
libceph: combine initializing and setting osd data This ends up being a rather large patch but what it's doing is somewhat straightforward. Basically, this is replacing two calls with one. The first of the two calls is initializing a struct ceph_osd_data with data (either a page array, a page list, or a bio list); the second is setting an osd request op so it associates that data with one of the op's parameters. In place of those two will be a single function that initializes the op directly. That means we sort of fan out a set of the needed functions: - extent ops with pages data - extent ops with pagelist data - extent ops with bio list data and - class ops with page data for receiving a response We also have define another one, but it's only used internally: - class ops with pagelist data for request parameters Note that we *still* haven't gotten rid of the osd request's r_data_in and r_data_out fields. All the osd ops refer to them for their data. For now, these data fields are pointers assigned to the appropriate r_data_* field when these new functions are called. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:12 +08:00
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
libceph: specify osd op by index in request An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:11 +08:00
extern void osd_req_op_cls_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
libceph: make method call data be a separate data item Right now the data for a method call is specified via a pointer and length, and it's copied--along with the class and method name--into a pagelist data item to be sent to the osd. Instead, encode the data in a data item separate from the class and method names. This will allow large amounts of data to be supplied to methods without copying. Only rbd uses the class functionality right now, and when it really needs this it will probably need to use a page array rather than a page list. But this simple implementation demonstrates the functionality on the osd client, and that's enough for now. This resolves: http://tracker.ceph.com/issues/4104 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-06 03:46:02 +08:00
const char *class, const char *method);
libceph: specify osd op by index in request An osd request now holds all of its source op structures, and every place that initializes one of these is in fact initializing one of the entries in the the osd request's array. So rather than supplying the address of the op to initialize, have caller specify the osd request and an indication of which op it would like to initialize. This better hides the details the op structure (and faciltates moving the data pointers they use). Since osd_req_op_init() is a common routine, and it's not used outside the osd client code, give it static scope. Also make it return the address of the specified op (so all the other init routines don't have to repeat that code). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-05 14:27:11 +08:00
extern void osd_req_op_watch_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 09:50:00 +08:00
u64 cookie, u64 version, int flag);
ceph: refactor osdc requests creation functions The osd requests creation are being decoupled from the vino parameter, allowing clients using the osd to use other arbitrary object names that are not necessarily vino based. Also, calc_raw_layout now takes a snap id. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 05:51:47 +08:00
extern struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
struct ceph_snap_context *snapc,
libceph: don't build request in ceph_osdc_new_request() This patch moves the call to ceph_osdc_build_request() out of ceph_osdc_new_request() and into its caller. This is in order to defer formatting osd operation information into the request message until just before request is started. The only unusual (ab)user of ceph_osdc_build_request() is ceph_writepages_start(), where the final length of write request may change (downward) based on the current inode size or the oldest snapshot context with dirty data for the inode. The remaining callers don't change anything in the request after has been built. This means the ops array is now supplied by the caller. It also means there is no need to pass the mtime to ceph_osdc_new_request() (it gets provided to ceph_osdc_build_request()). And rather than passing a do_sync flag, have the number of ops in the ops array supplied imply adding a second STARTSYNC operation after the READ or WRITE requested. This and some of the patches that follow are related to having the messenger (only) be responsible for filling the content of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-15 03:09:05 +08:00
unsigned int num_ops,
ceph: refactor osdc requests creation functions The osd requests creation are being decoupled from the vino parameter, allowing clients using the osd to use other arbitrary object names that are not necessarily vino based. Also, calc_raw_layout now takes a snap id. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 05:51:47 +08:00
bool use_mempool,
libceph: don't set pages or bio in ceph_osdc_alloc_request() Only one of the two callers of ceph_osdc_alloc_request() provides page or bio data for its payload. And essentially all that function was doing with those arguments was assigning them to fields in the osd request structure. Simplify ceph_osdc_alloc_request() by having the caller take care of making those assignments Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-11-14 11:11:15 +08:00
gfp_t gfp_flags);
ceph: refactor osdc requests creation functions The osd requests creation are being decoupled from the vino parameter, allowing clients using the osd to use other arbitrary object names that are not necessarily vino based. Also, calc_raw_layout now takes a snap id. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 05:51:47 +08:00
libceph: let osd ops determine request data length The length of outgoing data in an osd request is dependent on the osd ops that are embedded in that request. Each op is encoded into a request message using osd_req_encode_op(), so that should be used to determine the amount of outgoing data implied by the op as it is encoded. Have osd_req_encode_op() return the number of bytes of outgoing data implied by the op being encoded, and accumulate and use that in ceph_osdc_build_request(). As a result, ceph_osdc_build_request() no longer requires its "len" parameter, so get rid of it. Using the sum of the op lengths rather than the length provided is a valid change because: - The only callers of osd ceph_osdc_build_request() are rbd and the osd client (in ceph_osdc_new_request() on behalf of the file system). - When rbd calls it, the length provided is only non-zero for write requests, and in that case the single op has the same length value as what was passed here. - When called from ceph_osdc_new_request(), (it's not all that easy to see, but) the length passed is also always the same as the extent length encoded in its (single) write op if present. This resolves: http://tracker.ceph.com/issues/4406 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-09 03:35:36 +08:00
extern void ceph_osdc_build_request(struct ceph_osd_request *req, u64 off,
ceph: messenger and osdc changes for rbd Allow the messenger to send/receive data in a bio. This is added so that we wouldn't need to copy the data into pages or some other buffer when doing IO for an rbd block device. We can now have trailing variable sized data for osd ops. Also osd ops encoding is more modular. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:01:27 +08:00
struct ceph_snap_context *snapc,
libceph: drop snapid in ceph_calc_raw_layout() A snapshot id must be provided to ceph_calc_raw_layout() even though it is not needed at all for calculating the layout. Where the snapshot id *is* needed is when building the request message for an osd operation. Drop the snapid parameter from ceph_calc_raw_layout() and pass that value instead in ceph_osdc_build_request(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-11-14 11:11:15 +08:00
u64 snap_id,
rbd: drop oid parameters from ceph_osdc_build_request() The last two parameters to ceph_osd_build_request() describe the object id, but the values passed always come from the osd request structure whose address is also provided. Get rid of those last two parameters. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-11-09 22:43:15 +08:00
struct timespec *mtime);
ceph: refactor osdc requests creation functions The osd requests creation are being decoupled from the vino parameter, allowing clients using the osd to use other arbitrary object names that are not necessarily vino based. Also, calc_raw_layout now takes a snap id. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 05:51:47 +08:00
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
struct ceph_file_layout *layout,
struct ceph_vino vino,
libceph: don't build request in ceph_osdc_new_request() This patch moves the call to ceph_osdc_build_request() out of ceph_osdc_new_request() and into its caller. This is in order to defer formatting osd operation information into the request message until just before request is started. The only unusual (ab)user of ceph_osdc_build_request() is ceph_writepages_start(), where the final length of write request may change (downward) based on the current inode size or the oldest snapshot context with dirty data for the inode. The remaining callers don't change anything in the request after has been built. This means the ops array is now supplied by the caller. It also means there is no need to pass the mtime to ceph_osdc_new_request() (it gets provided to ceph_osdc_build_request()). And rather than passing a do_sync flag, have the number of ops in the ops array supplied imply adding a second STARTSYNC operation after the READ or WRITE requested. This and some of the patches that follow are related to having the messenger (only) be responsible for filling the content of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-15 03:09:05 +08:00
u64 offset, u64 *len,
libceph: keep source rather than message osd op array An osd request keeps a pointer to the osd operations (ops) array that it builds in its request message. In order to allow each op in the array to have its own distinct data, we will need to keep track of each op's data, and that information does not go over the wire. As long as we're tracking the data we might as well just track the entire (source) op definition for each of the ops. And if we're doing that, we'll have no more need to keep a pointer to the wire-encoded version. This patch makes the array of source ops be kept with the osd request structure, and uses that instead of the version encoded in the message in places where that was previously used. The array will be embedded in the request structure, and the maximum number of ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP to 2 to reduce the size of the structure. The result of doing this sort of ripples back up, and as a result various function parameters and local variables become unnecessary. Make r_num_ops be unsigned, and move the definition of struct ceph_osd_req_op earlier to ensure it's defined where needed. It does not yet add per-op data, that's coming soon. This resolves: http://tracker.ceph.com/issues/4656 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-04 10:32:51 +08:00
int num_ops, int opcode, int flags,
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
struct ceph_snap_context *snapc,
libceph: don't build request in ceph_osdc_new_request() This patch moves the call to ceph_osdc_build_request() out of ceph_osdc_new_request() and into its caller. This is in order to defer formatting osd operation information into the request message until just before request is started. The only unusual (ab)user of ceph_osdc_build_request() is ceph_writepages_start(), where the final length of write request may change (downward) based on the current inode size or the oldest snapshot context with dirty data for the inode. The remaining callers don't change anything in the request after has been built. This means the ops array is now supplied by the caller. It also means there is no need to pass the mtime to ceph_osdc_new_request() (it gets provided to ceph_osdc_build_request()). And rather than passing a do_sync flag, have the number of ops in the ops array supplied imply adding a second STARTSYNC operation after the READ or WRITE requested. This and some of the patches that follow are related to having the messenger (only) be responsible for filling the content of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-15 03:09:05 +08:00
u32 truncate_seq, u64 truncate_size,
libceph: don't assign page info in ceph_osdc_new_request() Currently ceph_osdc_new_request() assigns an osd request's r_num_pages and r_alignment fields. The only thing it does after that is call ceph_osdc_build_request(), and that doesn't need those fields to be assigned. Move the assignment of those fields out of ceph_osdc_new_request() and into its caller. As a result, the page_align parameter is no longer used, so get rid of it. Note that in ceph_sync_write(), the value for req->r_num_pages had already been calculated earlier (as num_pages, and fortunately it was computed the same way). So don't bother recomputing it, but because it's not needed earlier, move that calculation after the call to ceph_osdc_new_request(). Hold off making the assignment to r_alignment, doing it instead r_pages and r_num_pages are getting set. Similarly, in start_read(), nr_pages already holds the number of pages in the array (and is calculated the same way), so there's no need to recompute it. Move the assignment of the page alignment down with the others there as well. This and the next few patches are preparation work for: http://tracker.ceph.com/issues/4127 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-02 08:00:15 +08:00
bool use_mempool);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
extern void ceph_osdc_set_request_linger(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
extern void ceph_osdc_unregister_linger_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
{
ceph: use kref for ceph_osd_request Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-08 05:37:03 +08:00
kref_get(&req->r_kref);
}
extern void ceph_osdc_release_request(struct kref *kref);
static inline void ceph_osdc_put_request(struct ceph_osd_request *req)
{
kref_put(&req->r_kref, ceph_osdc_release_request);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
}
extern int ceph_osdc_start_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req,
bool nofail);
extern int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
extern void ceph_osdc_sync(struct ceph_osd_client *osdc);
libceph: add function to ensure notifies are complete Without a way to flush the osd client's notify workqueue, a watch event that is unregistered could continue receiving callbacks indefinitely. Unregistering the event simply means no new notifies are added to the queue, but there may still be events in the queue that will call the watch callback for the event. If the queue is flushed after the event is unregistered, the caller can be sure no more watch callbacks will occur for the canceled watch. Signed-off-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2013-08-29 12:43:09 +08:00
extern void ceph_osdc_flush_notifies(struct ceph_osd_client *osdc);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
struct ceph_vino vino,
struct ceph_file_layout *layout,
u64 off, u64 *plen,
u32 truncate_seq, u64 truncate_size,
ceph: make page alignment explicit in osd interface We used to infer alignment of IOs within a page based on the file offset, which assumed they matched. This broke with direct IO that was not aligned to pages (e.g., 512-byte aligned IO). We were also trusting the alignment specified in the OSD reply, which could have been adjusted by the server. Explicitly specify the page alignment when setting up OSD IO requests. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-10 04:43:12 +08:00
struct page **pages, int nr_pages,
int page_align);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
struct ceph_vino vino,
struct ceph_file_layout *layout,
struct ceph_snap_context *sc,
u64 off, u64 len,
u32 truncate_seq, u64 truncate_size,
struct timespec *mtime,
ceph: kill ceph_osdc_writepages() "flags" parameter There is only one caller of ceph_osdc_writepages(), and it always passes 0 as its "flags" argument. Get rid of that argument and replace its use in ceph_osdc_writepages() with 0. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-16 01:42:29 +08:00
struct page **pages, int nr_pages);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
/* watch/notify events */
extern int ceph_osdc_create_event(struct ceph_osd_client *osdc,
void (*event_cb)(u64, u64, u8, void *),
libceph: kill ceph_osdc_create_event() "one_shot" parameter There is only one caller of ceph_osdc_create_event(), and it provides 0 as its "one_shot" argument. Get rid of that argument and just use 0 in its place. Replace the code in handle_watch_notify() that executes if one_shot is nonzero in the event with a BUG_ON() call. While modifying "osd_client.c", give handle_watch_notify() static scope. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-16 01:42:30 +08:00
void *data, struct ceph_osd_event **pevent);
libceph: add lingering request and watch/notify event framework Lingering requests are requests that are sent to the OSD normally but tracked also after we get a successful request. This keeps the OSD connection open and resends the original request if the object moves to another OSD. The OSD can then send notification messages back to us if another client initiates a notify. This framework will be used by RBD so that the client gets notification when a snapshot is created by another node or tool. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 06:07:16 +08:00
extern void ceph_osdc_cancel_event(struct ceph_osd_event *event);
extern void ceph_osdc_put_event(struct ceph_osd_event *event);
ceph: OSD client The OSD client is responsible for reading and writing data from/to the object storage pool. This includes determining where objects are stored in the cluster, and ensuring that requests are retried or redirected in the event of a node failure or data migration. If an OSD does not respond before a timeout expires, keepalive messages are sent across the lossless, ordered communications channel to ensure that any break in the TCP is discovered. If the session does reset, a reconnection is attempted and affected requests are resent (by the message transport layer). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:10 +08:00
#endif