linux-sg2042/drivers/hid/usbhid/hid-core.c

1663 lines
44 KiB
C
Raw Normal View History

/*
* USB HID support for Linux
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2007-2008 Oliver Neukum
* Copyright (c) 2006-2010 Jiri Kosina
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>
#include <linux/input.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/string.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/hiddev.h>
#include <linux/hid-debug.h>
#include <linux/hidraw.h>
#include "usbhid.h"
/*
* Version Information
*/
#define DRIVER_DESC "USB HID core driver"
#define DRIVER_LICENSE "GPL"
/*
* Module parameters.
*/
static unsigned int hid_mousepoll_interval;
module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
static unsigned int ignoreled;
module_param_named(ignoreled, ignoreled, uint, 0644);
MODULE_PARM_DESC(ignoreled, "Autosuspend with active leds");
/* Quirks specified at module load time */
static char *quirks_param[MAX_USBHID_BOOT_QUIRKS];
module_param_array_named(quirks, quirks_param, charp, NULL, 0444);
MODULE_PARM_DESC(quirks, "Add/modify USB HID quirks by specifying "
" quirks=vendorID:productID:quirks"
" where vendorID, productID, and quirks are all in"
" 0x-prefixed hex");
/*
* Input submission and I/O error handler.
*/
static DEFINE_MUTEX(hid_open_mut);
static void hid_io_error(struct hid_device *hid);
static int hid_submit_out(struct hid_device *hid);
static int hid_submit_ctrl(struct hid_device *hid);
static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid);
/* Start up the input URB */
static int hid_start_in(struct hid_device *hid)
{
unsigned long flags;
int rc = 0;
struct usbhid_device *usbhid = hid->driver_data;
spin_lock_irqsave(&usbhid->lock, flags);
if ((hid->open > 0 || hid->quirks & HID_QUIRK_ALWAYS_POLL) &&
!test_bit(HID_DISCONNECTED, &usbhid->iofl) &&
!test_bit(HID_SUSPENDED, &usbhid->iofl) &&
!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
if (rc != 0) {
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
if (rc == -ENOSPC)
set_bit(HID_NO_BANDWIDTH, &usbhid->iofl);
} else {
clear_bit(HID_NO_BANDWIDTH, &usbhid->iofl);
}
}
spin_unlock_irqrestore(&usbhid->lock, flags);
return rc;
}
/* I/O retry timer routine */
static void hid_retry_timeout(unsigned long _hid)
{
struct hid_device *hid = (struct hid_device *) _hid;
struct usbhid_device *usbhid = hid->driver_data;
dev_dbg(&usbhid->intf->dev, "retrying intr urb\n");
if (hid_start_in(hid))
hid_io_error(hid);
}
/* Workqueue routine to reset the device or clear a halt */
static void hid_reset(struct work_struct *work)
{
struct usbhid_device *usbhid =
container_of(work, struct usbhid_device, reset_work);
struct hid_device *hid = usbhid->hid;
int rc;
if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
dev_dbg(&usbhid->intf->dev, "clear halt\n");
rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
if (rc == 0) {
hid_start_in(hid);
} else {
dev_dbg(&usbhid->intf->dev,
"clear-halt failed: %d\n", rc);
set_bit(HID_RESET_PENDING, &usbhid->iofl);
}
}
if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
dev_dbg(&usbhid->intf->dev, "resetting device\n");
usb_queue_reset_device(usbhid->intf);
}
}
/* Main I/O error handler */
static void hid_io_error(struct hid_device *hid)
{
unsigned long flags;
struct usbhid_device *usbhid = hid->driver_data;
spin_lock_irqsave(&usbhid->lock, flags);
/* Stop when disconnected */
if (test_bit(HID_DISCONNECTED, &usbhid->iofl))
goto done;
/* If it has been a while since the last error, we'll assume
* this a brand new error and reset the retry timeout. */
if (time_after(jiffies, usbhid->stop_retry + HZ/2))
usbhid->retry_delay = 0;
/* When an error occurs, retry at increasing intervals */
if (usbhid->retry_delay == 0) {
usbhid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */
usbhid->stop_retry = jiffies + msecs_to_jiffies(1000);
} else if (usbhid->retry_delay < 100)
usbhid->retry_delay *= 2;
if (time_after(jiffies, usbhid->stop_retry)) {
/* Retries failed, so do a port reset unless we lack bandwidth*/
if (!test_bit(HID_NO_BANDWIDTH, &usbhid->iofl)
&& !test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
schedule_work(&usbhid->reset_work);
goto done;
}
}
mod_timer(&usbhid->io_retry,
jiffies + msecs_to_jiffies(usbhid->retry_delay));
done:
spin_unlock_irqrestore(&usbhid->lock, flags);
}
static void usbhid_mark_busy(struct usbhid_device *usbhid)
{
struct usb_interface *intf = usbhid->intf;
usb_mark_last_busy(interface_to_usbdev(intf));
}
static int usbhid_restart_out_queue(struct usbhid_device *usbhid)
{
struct hid_device *hid = usb_get_intfdata(usbhid->intf);
int kicked;
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
int r;
if (!hid || test_bit(HID_RESET_PENDING, &usbhid->iofl) ||
test_bit(HID_SUSPENDED, &usbhid->iofl))
return 0;
if ((kicked = (usbhid->outhead != usbhid->outtail))) {
hid_dbg(hid, "Kicking head %d tail %d", usbhid->outhead, usbhid->outtail);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/* Try to wake up from autosuspend... */
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
r = usb_autopm_get_interface_async(usbhid->intf);
if (r < 0)
return r;
/*
* If still suspended, don't submit. Submission will
* occur if/when resume drains the queue.
*/
if (test_bit(HID_SUSPENDED, &usbhid->iofl)) {
usb_autopm_put_interface_no_suspend(usbhid->intf);
return r;
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/* Asynchronously flush queue. */
set_bit(HID_OUT_RUNNING, &usbhid->iofl);
if (hid_submit_out(hid)) {
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
usb_autopm_put_interface_async(usbhid->intf);
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
wake_up(&usbhid->wait);
}
return kicked;
}
static int usbhid_restart_ctrl_queue(struct usbhid_device *usbhid)
{
struct hid_device *hid = usb_get_intfdata(usbhid->intf);
int kicked;
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
int r;
WARN_ON(hid == NULL);
if (!hid || test_bit(HID_RESET_PENDING, &usbhid->iofl) ||
test_bit(HID_SUSPENDED, &usbhid->iofl))
return 0;
if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) {
hid_dbg(hid, "Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/* Try to wake up from autosuspend... */
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
r = usb_autopm_get_interface_async(usbhid->intf);
if (r < 0)
return r;
/*
* If still suspended, don't submit. Submission will
* occur if/when resume drains the queue.
*/
if (test_bit(HID_SUSPENDED, &usbhid->iofl)) {
usb_autopm_put_interface_no_suspend(usbhid->intf);
return r;
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/* Asynchronously flush queue. */
set_bit(HID_CTRL_RUNNING, &usbhid->iofl);
if (hid_submit_ctrl(hid)) {
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
usb_autopm_put_interface_async(usbhid->intf);
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
wake_up(&usbhid->wait);
}
return kicked;
}
/*
* Input interrupt completion handler.
*/
static void hid_irq_in(struct urb *urb)
{
struct hid_device *hid = urb->context;
struct usbhid_device *usbhid = hid->driver_data;
int status;
switch (urb->status) {
case 0: /* success */
usbhid->retry_delay = 0;
if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open)
break;
usbhid_mark_busy(usbhid);
if (!test_bit(HID_RESUME_RUNNING, &usbhid->iofl)) {
hid_input_report(urb->context, HID_INPUT_REPORT,
urb->transfer_buffer,
urb->actual_length, 1);
/*
* autosuspend refused while keys are pressed
* because most keyboards don't wake up when
* a key is released
*/
if (hid_check_keys_pressed(hid))
set_bit(HID_KEYS_PRESSED, &usbhid->iofl);
else
clear_bit(HID_KEYS_PRESSED, &usbhid->iofl);
}
break;
case -EPIPE: /* stall */
usbhid_mark_busy(usbhid);
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
set_bit(HID_CLEAR_HALT, &usbhid->iofl);
schedule_work(&usbhid->reset_work);
return;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN: /* unplug */
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
return;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ETIME: /* protocol error or unplug */
case -ETIMEDOUT: /* Should never happen, but... */
usbhid_mark_busy(usbhid);
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
hid_io_error(hid);
return;
default: /* error */
hid_warn(urb->dev, "input irq status %d received\n",
urb->status);
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
clear_bit(HID_IN_RUNNING, &usbhid->iofl);
if (status != -EPERM) {
hid_err(hid, "can't resubmit intr, %s-%s/input%d, status %d\n",
hid_to_usb_dev(hid)->bus->bus_name,
hid_to_usb_dev(hid)->devpath,
usbhid->ifnum, status);
hid_io_error(hid);
}
}
}
static int hid_submit_out(struct hid_device *hid)
{
struct hid_report *report;
char *raw_report;
struct usbhid_device *usbhid = hid->driver_data;
int r;
report = usbhid->out[usbhid->outtail].report;
raw_report = usbhid->out[usbhid->outtail].raw_report;
usbhid->urbout->transfer_buffer_length = hid_report_len(report);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
usbhid->urbout->dev = hid_to_usb_dev(hid);
if (raw_report) {
memcpy(usbhid->outbuf, raw_report,
usbhid->urbout->transfer_buffer_length);
kfree(raw_report);
usbhid->out[usbhid->outtail].raw_report = NULL;
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
dbg_hid("submitting out urb\n");
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
r = usb_submit_urb(usbhid->urbout, GFP_ATOMIC);
if (r < 0) {
hid_err(hid, "usb_submit_urb(out) failed: %d\n", r);
return r;
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
usbhid->last_out = jiffies;
return 0;
}
static int hid_submit_ctrl(struct hid_device *hid)
{
struct hid_report *report;
unsigned char dir;
char *raw_report;
int len, r;
struct usbhid_device *usbhid = hid->driver_data;
report = usbhid->ctrl[usbhid->ctrltail].report;
raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report;
dir = usbhid->ctrl[usbhid->ctrltail].dir;
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
if (dir == USB_DIR_OUT) {
usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
usbhid->urbctrl->transfer_buffer_length = len;
if (raw_report) {
memcpy(usbhid->ctrlbuf, raw_report, len);
kfree(raw_report);
usbhid->ctrl[usbhid->ctrltail].raw_report = NULL;
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
} else {
int maxpacket, padlen;
usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
maxpacket = usb_maxpacket(hid_to_usb_dev(hid),
usbhid->urbctrl->pipe, 0);
if (maxpacket > 0) {
padlen = DIV_ROUND_UP(len, maxpacket);
padlen *= maxpacket;
if (padlen > usbhid->bufsize)
padlen = usbhid->bufsize;
} else
padlen = 0;
usbhid->urbctrl->transfer_buffer_length = padlen;
}
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
usbhid->urbctrl->dev = hid_to_usb_dev(hid);
usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT :
HID_REQ_GET_REPORT;
usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) |
report->id);
usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
usbhid->cr->wLength = cpu_to_le16(len);
dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n",
usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" :
"Get_Report",
usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
r = usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC);
if (r < 0) {
hid_err(hid, "usb_submit_urb(ctrl) failed: %d\n", r);
return r;
}
usbhid->last_ctrl = jiffies;
return 0;
}
/*
* Output interrupt completion handler.
*/
static void hid_irq_out(struct urb *urb)
{
struct hid_device *hid = urb->context;
struct usbhid_device *usbhid = hid->driver_data;
unsigned long flags;
int unplug = 0;
switch (urb->status) {
case 0: /* success */
break;
case -ESHUTDOWN: /* unplug */
unplug = 1;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ECONNRESET: /* unlink */
case -ENOENT:
break;
default: /* error */
hid_warn(urb->dev, "output irq status %d received\n",
urb->status);
}
spin_lock_irqsave(&usbhid->lock, flags);
if (unplug) {
usbhid->outtail = usbhid->outhead;
} else {
usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
if (usbhid->outhead != usbhid->outtail &&
hid_submit_out(hid) == 0) {
/* Successfully submitted next urb in queue */
spin_unlock_irqrestore(&usbhid->lock, flags);
return;
}
}
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
spin_unlock_irqrestore(&usbhid->lock, flags);
usb_autopm_put_interface_async(usbhid->intf);
wake_up(&usbhid->wait);
}
/*
* Control pipe completion handler.
*/
static void hid_ctrl(struct urb *urb)
{
struct hid_device *hid = urb->context;
struct usbhid_device *usbhid = hid->driver_data;
int unplug = 0, status = urb->status;
switch (status) {
case 0: /* success */
if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
hid_input_report(urb->context,
usbhid->ctrl[usbhid->ctrltail].report->type,
urb->transfer_buffer, urb->actual_length, 0);
break;
case -ESHUTDOWN: /* unplug */
unplug = 1;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ECONNRESET: /* unlink */
case -ENOENT:
case -EPIPE: /* report not available */
break;
default: /* error */
hid_warn(urb->dev, "ctrl urb status %d received\n", status);
}
spin_lock(&usbhid->lock);
if (unplug) {
usbhid->ctrltail = usbhid->ctrlhead;
} else {
usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
if (usbhid->ctrlhead != usbhid->ctrltail &&
hid_submit_ctrl(hid) == 0) {
/* Successfully submitted next urb in queue */
spin_unlock(&usbhid->lock);
return;
}
}
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
spin_unlock(&usbhid->lock);
usb_autopm_put_interface_async(usbhid->intf);
wake_up(&usbhid->wait);
}
static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *report,
unsigned char dir)
{
int head;
struct usbhid_device *usbhid = hid->driver_data;
HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed Set disconnected flag in struct usbhid when a usb device is removed. Check for disconnected flag before sending urb requests. This prevents a kernel panic when a hid driver calls hid_hw_request() after removing a usb device. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 PGD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 2 PID: 39 Comm: khubd Tainted: G IO 3.16.0-rc5+ #112 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000 RIP: 0010:[<ffffffff8161746f>] [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 RSP: 0018:ffff8800daf83750 EFLAGS: 00010086 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8 FS: 0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0 Stack: ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000 ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0 ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013 Call Trace: [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140 [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370 [<ffffffff81617b4a>] usbhid_request+0x1a/0x30 [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub] [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger] [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger] [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio] [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio] [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio] [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d] [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80 [<ffffffff814f41d1>] platform_device_del+0x21/0xc0 [<ffffffff814f4282>] platform_device_unregister+0x12/0x30 [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50 [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70 [<ffffffff81512105>] mfd_remove_devices+0x25/0x30 [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub] [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81607d47>] hid_destroy_device+0x27/0x60 [<ffffffff81616972>] usbhid_disconnect+0x22/0x50 [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0 [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0 [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840 Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-25 13:13:01 +08:00
if (((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN) ||
test_bit(HID_DISCONNECTED, &usbhid->iofl))
return;
if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
hid_warn(hid, "output queue full\n");
return;
}
HID: fix data access in implement() implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-11 01:56:27 +08:00
usbhid->out[usbhid->outhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC);
if (!usbhid->out[usbhid->outhead].raw_report) {
hid_warn(hid, "output queueing failed\n");
return;
}
hid_output_report(report, usbhid->out[usbhid->outhead].raw_report);
usbhid->out[usbhid->outhead].report = report;
usbhid->outhead = head;
/* If the queue isn't running, restart it */
if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
usbhid_restart_out_queue(usbhid);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/* Otherwise see if an earlier request has timed out */
} else if (time_after(jiffies, usbhid->last_out + HZ * 5)) {
/* Prevent autosuspend following the unlink */
usb_autopm_get_interface_no_resume(usbhid->intf);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/*
* Prevent resubmission in case the URB completes
* before we can unlink it. We don't want to cancel
* the wrong transfer!
*/
usb_block_urb(usbhid->urbout);
/* Drop lock to avoid deadlock if the callback runs */
spin_unlock(&usbhid->lock);
usb_unlink_urb(usbhid->urbout);
spin_lock(&usbhid->lock);
usb_unblock_urb(usbhid->urbout);
/* Unlink might have stopped the queue */
if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl))
usbhid_restart_out_queue(usbhid);
/* Now we can allow autosuspend again */
usb_autopm_put_interface_async(usbhid->intf);
}
return;
}
if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
hid_warn(hid, "control queue full\n");
return;
}
if (dir == USB_DIR_OUT) {
HID: fix data access in implement() implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-11 01:56:27 +08:00
usbhid->ctrl[usbhid->ctrlhead].raw_report = hid_alloc_report_buf(report, GFP_ATOMIC);
if (!usbhid->ctrl[usbhid->ctrlhead].raw_report) {
hid_warn(hid, "control queueing failed\n");
return;
}
hid_output_report(report, usbhid->ctrl[usbhid->ctrlhead].raw_report);
}
usbhid->ctrl[usbhid->ctrlhead].report = report;
usbhid->ctrl[usbhid->ctrlhead].dir = dir;
usbhid->ctrlhead = head;
/* If the queue isn't running, restart it */
if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
usbhid_restart_ctrl_queue(usbhid);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/* Otherwise see if an earlier request has timed out */
} else if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) {
/* Prevent autosuspend following the unlink */
usb_autopm_get_interface_no_resume(usbhid->intf);
HID: usbhid: hid-core: submit queued urbs before suspend If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 19:23:49 +08:00
/*
* Prevent resubmission in case the URB completes
* before we can unlink it. We don't want to cancel
* the wrong transfer!
*/
usb_block_urb(usbhid->urbctrl);
/* Drop lock to avoid deadlock if the callback runs */
spin_unlock(&usbhid->lock);
usb_unlink_urb(usbhid->urbctrl);
spin_lock(&usbhid->lock);
usb_unblock_urb(usbhid->urbctrl);
/* Unlink might have stopped the queue */
if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
usbhid_restart_ctrl_queue(usbhid);
/* Now we can allow autosuspend again */
usb_autopm_put_interface_async(usbhid->intf);
}
}
static void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
{
struct usbhid_device *usbhid = hid->driver_data;
unsigned long flags;
spin_lock_irqsave(&usbhid->lock, flags);
__usbhid_submit_report(hid, report, dir);
spin_unlock_irqrestore(&usbhid->lock, flags);
}
static int usbhid_wait_io(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
if (!wait_event_timeout(usbhid->wait,
(!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
!test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
10*HZ)) {
dbg_hid("timeout waiting for ctrl or out queue to clear\n");
return -1;
}
return 0;
}
static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
{
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
unsigned char type, void *buf, int size)
{
int result, retries = 4;
memset(buf, 0, size);
do {
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
(type << 8), ifnum, buf, size, USB_CTRL_GET_TIMEOUT);
retries--;
} while (result < size && retries);
return result;
}
int usbhid_open(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
int res = 0;
mutex_lock(&hid_open_mut);
if (!hid->open++) {
res = usb_autopm_get_interface(usbhid->intf);
/* the device must be awake to reliably request remote wakeup */
if (res < 0) {
hid->open--;
res = -EIO;
goto done;
}
usbhid->intf->needs_remote_wakeup = 1;
set_bit(HID_RESUME_RUNNING, &usbhid->iofl);
res = hid_start_in(hid);
if (res) {
if (res != -ENOSPC) {
hid_io_error(hid);
res = 0;
} else {
/* no use opening if resources are insufficient */
hid->open--;
res = -EBUSY;
usbhid->intf->needs_remote_wakeup = 0;
}
}
usb_autopm_put_interface(usbhid->intf);
/*
* In case events are generated while nobody was listening,
* some are released when the device is re-opened.
* Wait 50 msec for the queue to empty before allowing events
* to go through hid.
*/
if (res == 0 && !(hid->quirks & HID_QUIRK_ALWAYS_POLL))
msleep(50);
clear_bit(HID_RESUME_RUNNING, &usbhid->iofl);
}
done:
mutex_unlock(&hid_open_mut);
return res;
}
void usbhid_close(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
mutex_lock(&hid_open_mut);
/* protecting hid->open to make sure we don't restart
* data acquistion due to a resumption we no longer
* care about
*/
spin_lock_irq(&usbhid->lock);
if (!--hid->open) {
spin_unlock_irq(&usbhid->lock);
hid_cancel_delayed_stuff(usbhid);
if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
usb_kill_urb(usbhid->urbin);
usbhid->intf->needs_remote_wakeup = 0;
}
} else {
spin_unlock_irq(&usbhid->lock);
}
mutex_unlock(&hid_open_mut);
}
/*
* Initialize all reports
*/
void usbhid_init_reports(struct hid_device *hid)
{
struct hid_report *report;
struct usbhid_device *usbhid = hid->driver_data;
struct hid_report_enum *report_enum;
int err, ret;
if (!(hid->quirks & HID_QUIRK_NO_INIT_INPUT_REPORTS)) {
report_enum = &hid->report_enum[HID_INPUT_REPORT];
list_for_each_entry(report, &report_enum->report_list, list)
usbhid_submit_report(hid, report, USB_DIR_IN);
}
report_enum = &hid->report_enum[HID_FEATURE_REPORT];
list_for_each_entry(report, &report_enum->report_list, list)
usbhid_submit_report(hid, report, USB_DIR_IN);
err = 0;
ret = usbhid_wait_io(hid);
while (ret) {
err |= ret;
if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
usb_kill_urb(usbhid->urbctrl);
if (test_bit(HID_OUT_RUNNING, &usbhid->iofl))
usb_kill_urb(usbhid->urbout);
ret = usbhid_wait_io(hid);
}
if (err)
hid_warn(hid, "timeout initializing reports\n");
}
/*
* Reset LEDs which BIOS might have left on. For now, just NumLock (0x01).
*/
static int hid_find_field_early(struct hid_device *hid, unsigned int page,
unsigned int hid_code, struct hid_field **pfield)
{
struct hid_report *report;
struct hid_field *field;
struct hid_usage *usage;
int i, j;
list_for_each_entry(report, &hid->report_enum[HID_OUTPUT_REPORT].report_list, list) {
for (i = 0; i < report->maxfield; i++) {
field = report->field[i];
for (j = 0; j < field->maxusage; j++) {
usage = &field->usage[j];
if ((usage->hid & HID_USAGE_PAGE) == page &&
(usage->hid & 0xFFFF) == hid_code) {
*pfield = field;
return j;
}
}
}
}
return -1;
}
static void usbhid_set_leds(struct hid_device *hid)
{
struct hid_field *field;
int offset;
if ((offset = hid_find_field_early(hid, HID_UP_LED, 0x01, &field)) != -1) {
hid_set_field(field, offset, 0);
usbhid_submit_report(hid, field->report, USB_DIR_OUT);
}
}
/*
* Traverse the supplied list of reports and find the longest
*/
static void hid_find_max_report(struct hid_device *hid, unsigned int type,
unsigned int *max)
{
struct hid_report *report;
unsigned int size;
list_for_each_entry(report, &hid->report_enum[type].report_list, list) {
size = ((report->size - 1) >> 3) + 1 + hid->report_enum[type].numbered;
if (*max < size)
*max = size;
}
}
static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
usbhid->inbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
&usbhid->inbuf_dma);
usbhid->outbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
&usbhid->outbuf_dma);
usbhid->cr = kmalloc(sizeof(*usbhid->cr), GFP_KERNEL);
usbhid->ctrlbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
&usbhid->ctrlbuf_dma);
if (!usbhid->inbuf || !usbhid->outbuf || !usbhid->cr ||
!usbhid->ctrlbuf)
return -1;
return 0;
}
static int usbhid_get_raw_report(struct hid_device *hid,
unsigned char report_number, __u8 *buf, size_t count,
unsigned char report_type)
{
struct usbhid_device *usbhid = hid->driver_data;
struct usb_device *dev = hid_to_usb_dev(hid);
struct usb_interface *intf = usbhid->intf;
struct usb_host_interface *interface = intf->cur_altsetting;
int skipped_report_id = 0;
int ret;
/* Byte 0 is the report number. Report data starts at byte 1.*/
buf[0] = report_number;
if (report_number == 0x0) {
/* Offset the return buffer by 1, so that the report ID
will remain in byte 0. */
buf++;
count--;
skipped_report_id = 1;
}
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
HID_REQ_GET_REPORT,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
((report_type + 1) << 8) | report_number,
interface->desc.bInterfaceNumber, buf, count,
USB_CTRL_SET_TIMEOUT);
/* count also the report id */
if (ret > 0 && skipped_report_id)
ret++;
return ret;
}
static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
__u8 *buf, size_t count, unsigned char rtype)
{
struct usbhid_device *usbhid = hid->driver_data;
struct usb_device *dev = hid_to_usb_dev(hid);
struct usb_interface *intf = usbhid->intf;
struct usb_host_interface *interface = intf->cur_altsetting;
int ret, skipped_report_id = 0;
/* Byte 0 is the report number. Report data starts at byte 1.*/
if ((rtype == HID_OUTPUT_REPORT) &&
(hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
buf[0] = 0;
else
buf[0] = reportnum;
if (buf[0] == 0x0) {
/* Don't send the Report ID */
buf++;
count--;
skipped_report_id = 1;
}
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
((rtype + 1) << 8) | reportnum,
interface->desc.bInterfaceNumber, buf, count,
USB_CTRL_SET_TIMEOUT);
/* count also the report id, if this was a numbered report. */
if (ret > 0 && skipped_report_id)
ret++;
return ret;
}
static int usbhid_output_report(struct hid_device *hid, __u8 *buf, size_t count)
{
struct usbhid_device *usbhid = hid->driver_data;
struct usb_device *dev = hid_to_usb_dev(hid);
int actual_length, skipped_report_id = 0, ret;
if (!usbhid->urbout)
return -ENOSYS;
if (buf[0] == 0x0) {
/* Don't send the Report ID */
buf++;
count--;
skipped_report_id = 1;
}
ret = usb_interrupt_msg(dev, usbhid->urbout->pipe,
buf, count, &actual_length,
USB_CTRL_SET_TIMEOUT);
/* return the number of bytes transferred */
if (ret == 0) {
ret = actual_length;
/* count also the report id */
if (skipped_report_id)
ret++;
}
return ret;
}
static void usbhid_restart_queues(struct usbhid_device *usbhid)
{
if (usbhid->urbout && !test_bit(HID_OUT_RUNNING, &usbhid->iofl))
usbhid_restart_out_queue(usbhid);
if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
usbhid_restart_ctrl_queue(usbhid);
}
static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
usb_free_coherent(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
usb_free_coherent(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
kfree(usbhid->cr);
usb_free_coherent(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
}
static int usbhid_parse(struct hid_device *hid)
{
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_device *dev = interface_to_usbdev (intf);
struct hid_descriptor *hdesc;
u32 quirks = 0;
unsigned int rsize = 0;
char *rdesc;
int ret, n;
quirks = usbhid_lookup_quirk(le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
if (quirks & HID_QUIRK_IGNORE)
return -ENODEV;
/* Many keyboards and mice don't like to be polled for reports,
* so we will always set the HID_QUIRK_NOGET flag for them. */
if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) {
if (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD ||
interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE)
quirks |= HID_QUIRK_NOGET;
}
if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
(!interface->desc.bNumEndpoints ||
usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
dbg_hid("class descriptor not present\n");
return -ENODEV;
}
hid->version = le16_to_cpu(hdesc->bcdHID);
hid->country = hdesc->bCountryCode;
for (n = 0; n < hdesc->bNumDescriptors; n++)
if (hdesc->desc[n].bDescriptorType == HID_DT_REPORT)
rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength);
if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
dbg_hid("weird size of report descriptor (%u)\n", rsize);
return -EINVAL;
}
if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) {
dbg_hid("couldn't allocate rdesc memory\n");
return -ENOMEM;
}
hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber,
HID_DT_REPORT, rdesc, rsize);
if (ret < 0) {
dbg_hid("reading report descriptor failed\n");
kfree(rdesc);
goto err;
}
ret = hid_parse_report(hid, rdesc, rsize);
kfree(rdesc);
if (ret) {
dbg_hid("parsing report descriptor failed\n");
goto err;
}
hid->quirks |= quirks;
return 0;
err:
return ret;
}
static int usbhid_start(struct hid_device *hid)
{
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_device *dev = interface_to_usbdev(intf);
struct usbhid_device *usbhid = hid->driver_data;
unsigned int n, insize = 0;
int ret;
clear_bit(HID_DISCONNECTED, &usbhid->iofl);
usbhid->bufsize = HID_MIN_BUFFER_SIZE;
hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
hid_find_max_report(hid, HID_FEATURE_REPORT, &usbhid->bufsize);
if (usbhid->bufsize > HID_MAX_BUFFER_SIZE)
usbhid->bufsize = HID_MAX_BUFFER_SIZE;
hid_find_max_report(hid, HID_INPUT_REPORT, &insize);
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
}
for (n = 0; n < interface->desc.bNumEndpoints; n++) {
struct usb_endpoint_descriptor *endpoint;
int pipe;
int interval;
endpoint = &interface->endpoint[n].desc;
if (!usb_endpoint_xfer_int(endpoint))
continue;
interval = endpoint->bInterval;
/* Some vendors give fullspeed interval on highspeed devides */
if (hid->quirks & HID_QUIRK_FULLSPEED_INTERVAL &&
dev->speed == USB_SPEED_HIGH) {
interval = fls(endpoint->bInterval*8);
printk(KERN_INFO "%s: Fixing fullspeed to highspeed interval: %d -> %d\n",
hid->name, endpoint->bInterval, interval);
}
/* Change the polling interval of mice. */
if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
interval = hid_mousepoll_interval;
ret = -ENOMEM;
if (usb_endpoint_dir_in(endpoint)) {
if (usbhid->urbin)
continue;
if (!(usbhid->urbin = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
usb_fill_int_urb(usbhid->urbin, dev, pipe, usbhid->inbuf, insize,
hid_irq_in, hid, interval);
usbhid->urbin->transfer_dma = usbhid->inbuf_dma;
usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
} else {
if (usbhid->urbout)
continue;
if (!(usbhid->urbout = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
pipe = usb_sndintpipe(dev, endpoint->bEndpointAddress);
usb_fill_int_urb(usbhid->urbout, dev, pipe, usbhid->outbuf, 0,
hid_irq_out, hid, interval);
usbhid->urbout->transfer_dma = usbhid->outbuf_dma;
usbhid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
}
}
usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!usbhid->urbctrl) {
ret = -ENOMEM;
goto fail;
}
usb_fill_control_urb(usbhid->urbctrl, dev, 0, (void *) usbhid->cr,
usbhid->ctrlbuf, 1, hid_ctrl, hid);
usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
usbhid->urbctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
usbhid_init_reports(hid);
set_bit(HID_STARTED, &usbhid->iofl);
if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
ret = usb_autopm_get_interface(usbhid->intf);
if (ret)
goto fail;
usbhid->intf->needs_remote_wakeup = 1;
ret = hid_start_in(hid);
if (ret) {
dev_err(&hid->dev,
"failed to start in urb: %d\n", ret);
}
usb_autopm_put_interface(usbhid->intf);
}
/* Some keyboards don't work until their LEDs have been set.
* Since BIOSes do set the LEDs, it must be safe for any device
* that supports the keyboard boot protocol.
* In addition, enable remote wakeup by default for all keyboard
* devices supporting the boot protocol.
*/
if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT &&
interface->desc.bInterfaceProtocol ==
USB_INTERFACE_PROTOCOL_KEYBOARD) {
usbhid_set_leds(hid);
device_set_wakeup_enable(&dev->dev, 1);
}
return 0;
fail:
usb_free_urb(usbhid->urbin);
usb_free_urb(usbhid->urbout);
usb_free_urb(usbhid->urbctrl);
usbhid->urbin = NULL;
usbhid->urbout = NULL;
usbhid->urbctrl = NULL;
hid_free_buffers(dev, hid);
return ret;
}
static void usbhid_stop(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
if (WARN_ON(!usbhid))
return;
if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
usbhid->intf->needs_remote_wakeup = 0;
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->lock); /* Sync with error and led handlers */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
usb_kill_urb(usbhid->urbin);
usb_kill_urb(usbhid->urbout);
usb_kill_urb(usbhid->urbctrl);
hid_cancel_delayed_stuff(usbhid);
hid->claimed = 0;
usb_free_urb(usbhid->urbin);
usb_free_urb(usbhid->urbctrl);
usb_free_urb(usbhid->urbout);
usbhid->urbin = NULL; /* don't mess up next start */
usbhid->urbctrl = NULL;
usbhid->urbout = NULL;
hid_free_buffers(hid_to_usb_dev(hid), hid);
}
static int usbhid_power(struct hid_device *hid, int lvl)
{
int r = 0;
switch (lvl) {
case PM_HINT_FULLON:
r = usbhid_get_power(hid);
break;
case PM_HINT_NORMAL:
usbhid_put_power(hid);
break;
}
return r;
}
static void usbhid_request(struct hid_device *hid, struct hid_report *rep, int reqtype)
{
switch (reqtype) {
case HID_REQ_GET_REPORT:
usbhid_submit_report(hid, rep, USB_DIR_IN);
break;
case HID_REQ_SET_REPORT:
usbhid_submit_report(hid, rep, USB_DIR_OUT);
break;
}
}
static int usbhid_raw_request(struct hid_device *hid, unsigned char reportnum,
__u8 *buf, size_t len, unsigned char rtype,
int reqtype)
{
switch (reqtype) {
case HID_REQ_GET_REPORT:
return usbhid_get_raw_report(hid, reportnum, buf, len, rtype);
case HID_REQ_SET_REPORT:
return usbhid_set_raw_report(hid, reportnum, buf, len, rtype);
default:
return -EIO;
}
}
static int usbhid_idle(struct hid_device *hid, int report, int idle,
int reqtype)
{
struct usb_device *dev = hid_to_usb_dev(hid);
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
struct usb_host_interface *interface = intf->cur_altsetting;
int ifnum = interface->desc.bInterfaceNumber;
if (reqtype != HID_REQ_SET_IDLE)
return -EINVAL;
return hid_set_idle(dev, ifnum, report, idle);
}
static struct hid_ll_driver usb_hid_driver = {
.parse = usbhid_parse,
.start = usbhid_start,
.stop = usbhid_stop,
.open = usbhid_open,
.close = usbhid_close,
.power = usbhid_power,
.request = usbhid_request,
.wait = usbhid_wait_io,
.raw_request = usbhid_raw_request,
.output_report = usbhid_output_report,
.idle = usbhid_idle,
};
static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_device *dev = interface_to_usbdev(intf);
struct usbhid_device *usbhid;
struct hid_device *hid;
unsigned int n, has_in = 0;
size_t len;
int ret;
dbg_hid("HID probe called for ifnum %d\n",
intf->altsetting->desc.bInterfaceNumber);
for (n = 0; n < interface->desc.bNumEndpoints; n++)
if (usb_endpoint_is_int_in(&interface->endpoint[n].desc))
has_in++;
if (!has_in) {
hid_err(intf, "couldn't find an input interrupt endpoint\n");
return -ENODEV;
}
hid = hid_allocate_device();
if (IS_ERR(hid))
return PTR_ERR(hid);
usb_set_intfdata(intf, hid);
hid->ll_driver = &usb_hid_driver;
hid->ff_init = hid_pidff_init;
#ifdef CONFIG_USB_HIDDEV
hid->hiddev_connect = hiddev_connect;
hid->hiddev_disconnect = hiddev_disconnect;
hid->hiddev_hid_event = hiddev_hid_event;
hid->hiddev_report_event = hiddev_report_event;
#endif
hid->dev.parent = &intf->dev;
hid->bus = BUS_USB;
hid->vendor = le16_to_cpu(dev->descriptor.idVendor);
hid->product = le16_to_cpu(dev->descriptor.idProduct);
hid->name[0] = 0;
hid->quirks = usbhid_lookup_quirk(hid->vendor, hid->product);
if (intf->cur_altsetting->desc.bInterfaceProtocol ==
USB_INTERFACE_PROTOCOL_MOUSE)
hid->type = HID_TYPE_USBMOUSE;
HID: yurex: recognize GeneralKeys wireless presenter as generic HID Unfortunately, the device seems to have the same Vendor ID and Product ID as YUREX leg-shakes sensors, and the commit 6bc235a2e2 ("USB: add driver for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list. I believe that we can distinguish YUREX and the Wireless Presenter by device type. The patch below makes the driver ignore only YUREX (bInterfaceProtocol==0), and recognize Wireless Presenter (bInterfaceProtocol is keyboard or mouse) as generic HID. (I don't have the Wireless Presenter, so not yet ested.) ** YUREX lsusb information: Bus 002 Device 007: ID 0c45:1010 Microdia Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0c45 Microdia idProduct 0x1010 bcdDevice 0.03 iManufacturer 1 JESS iProduct 2 YUREX iSerial 3 10000269 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 31 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922 Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Greg KH <gregkh@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Reported-by: Thomas B?chler <thomas@archlinux.org> Tested-by: Thomas B?chler <thomas@archlinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24 06:45:44 +08:00
else if (intf->cur_altsetting->desc.bInterfaceProtocol == 0)
hid->type = HID_TYPE_USBNONE;
if (dev->manufacturer)
strlcpy(hid->name, dev->manufacturer, sizeof(hid->name));
if (dev->product) {
if (dev->manufacturer)
strlcat(hid->name, " ", sizeof(hid->name));
strlcat(hid->name, dev->product, sizeof(hid->name));
}
if (!strlen(hid->name))
snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x",
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
usb_make_path(dev, hid->phys, sizeof(hid->phys));
strlcat(hid->phys, "/input", sizeof(hid->phys));
len = strlen(hid->phys);
if (len < sizeof(hid->phys) - 1)
snprintf(hid->phys + len, sizeof(hid->phys) - len,
"%d", intf->altsetting[0].desc.bInterfaceNumber);
if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
hid->uniq[0] = 0;
usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL);
if (usbhid == NULL) {
ret = -ENOMEM;
goto err;
}
hid->driver_data = usbhid;
usbhid->hid = hid;
usbhid->intf = intf;
usbhid->ifnum = interface->desc.bInterfaceNumber;
init_waitqueue_head(&usbhid->wait);
INIT_WORK(&usbhid->reset_work, hid_reset);
setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
spin_lock_init(&usbhid->lock);
ret = hid_add_device(hid);
if (ret) {
if (ret != -ENODEV)
hid_err(intf, "can't add hid device: %d\n", ret);
goto err_free;
}
return 0;
err_free:
kfree(usbhid);
err:
hid_destroy_device(hid);
return ret;
}
static void usbhid_disconnect(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata(intf);
struct usbhid_device *usbhid;
if (WARN_ON(!hid))
return;
usbhid = hid->driver_data;
HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed Set disconnected flag in struct usbhid when a usb device is removed. Check for disconnected flag before sending urb requests. This prevents a kernel panic when a hid driver calls hid_hw_request() after removing a usb device. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 PGD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 2 PID: 39 Comm: khubd Tainted: G IO 3.16.0-rc5+ #112 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000 RIP: 0010:[<ffffffff8161746f>] [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 RSP: 0018:ffff8800daf83750 EFLAGS: 00010086 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8 FS: 0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0 Stack: ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000 ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0 ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013 Call Trace: [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140 [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370 [<ffffffff81617b4a>] usbhid_request+0x1a/0x30 [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub] [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger] [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger] [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio] [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio] [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio] [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d] [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80 [<ffffffff814f41d1>] platform_device_del+0x21/0xc0 [<ffffffff814f4282>] platform_device_unregister+0x12/0x30 [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50 [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70 [<ffffffff81512105>] mfd_remove_devices+0x25/0x30 [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub] [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81607d47>] hid_destroy_device+0x27/0x60 [<ffffffff81616972>] usbhid_disconnect+0x22/0x50 [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0 [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0 [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840 Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-25 13:13:01 +08:00
spin_lock_irq(&usbhid->lock); /* Sync with error and led handlers */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
hid_destroy_device(hid);
kfree(usbhid);
}
static void hid_cancel_delayed_stuff(struct usbhid_device *usbhid)
{
del_timer_sync(&usbhid->io_retry);
cancel_work_sync(&usbhid->reset_work);
}
static void hid_cease_io(struct usbhid_device *usbhid)
{
del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
usb_kill_urb(usbhid->urbctrl);
usb_kill_urb(usbhid->urbout);
}
/* Treat USB reset pretty much the same as suspend/resume */
static int hid_pre_reset(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata(intf);
struct usbhid_device *usbhid = hid->driver_data;
spin_lock_irq(&usbhid->lock);
set_bit(HID_RESET_PENDING, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
hid_cease_io(usbhid);
return 0;
}
/* Same routine used for post_reset and reset_resume */
static int hid_post_reset(struct usb_interface *intf)
{
struct usb_device *dev = interface_to_usbdev (intf);
struct hid_device *hid = usb_get_intfdata(intf);
struct usbhid_device *usbhid = hid->driver_data;
struct usb_host_interface *interface = intf->cur_altsetting;
int status;
char *rdesc;
/* Fetch and examine the HID report descriptor. If this
* has changed, then rebind. Since usbcore's check of the
* configuration descriptors passed, we already know that
* the size of the HID report descriptor has not changed.
*/
rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
if (!rdesc) {
dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
return 1;
}
status = hid_get_class_descriptor(dev,
interface->desc.bInterfaceNumber,
HID_DT_REPORT, rdesc, hid->dev_rsize);
if (status < 0) {
dbg_hid("reading report descriptor failed (post_reset)\n");
kfree(rdesc);
return 1;
}
status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize);
kfree(rdesc);
if (status != 0) {
dbg_hid("report descriptor changed\n");
return 1;
}
spin_lock_irq(&usbhid->lock);
clear_bit(HID_RESET_PENDING, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
hid_set_idle(dev, intf->cur_altsetting->desc.bInterfaceNumber, 0, 0);
status = hid_start_in(hid);
if (status < 0)
hid_io_error(hid);
usbhid_restart_queues(usbhid);
return 0;
}
int usbhid_get_power(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
return usb_autopm_get_interface(usbhid->intf);
}
void usbhid_put_power(struct hid_device *hid)
{
struct usbhid_device *usbhid = hid->driver_data;
usb_autopm_put_interface(usbhid->intf);
}
#ifdef CONFIG_PM
static int hid_resume_common(struct hid_device *hid, bool driver_suspended)
{
struct usbhid_device *usbhid = hid->driver_data;
int status;
spin_lock_irq(&usbhid->lock);
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid_mark_busy(usbhid);
if (test_bit(HID_CLEAR_HALT, &usbhid->iofl) ||
test_bit(HID_RESET_PENDING, &usbhid->iofl))
schedule_work(&usbhid->reset_work);
usbhid->retry_delay = 0;
usbhid_restart_queues(usbhid);
spin_unlock_irq(&usbhid->lock);
status = hid_start_in(hid);
if (status < 0)
hid_io_error(hid);
if (driver_suspended && hid->driver && hid->driver->resume)
status = hid->driver->resume(hid);
return status;
}
static int hid_suspend(struct usb_interface *intf, pm_message_t message)
{
struct hid_device *hid = usb_get_intfdata(intf);
struct usbhid_device *usbhid = hid->driver_data;
int status = 0;
bool driver_suspended = false;
unsigned int ledcount;
if (PMSG_IS_AUTO(message)) {
ledcount = hidinput_count_leds(hid);
spin_lock_irq(&usbhid->lock); /* Sync with error handler */
if (!test_bit(HID_RESET_PENDING, &usbhid->iofl)
&& !test_bit(HID_CLEAR_HALT, &usbhid->iofl)
&& !test_bit(HID_OUT_RUNNING, &usbhid->iofl)
&& !test_bit(HID_CTRL_RUNNING, &usbhid->iofl)
&& !test_bit(HID_KEYS_PRESSED, &usbhid->iofl)
&& (!ledcount || ignoreled))
{
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
if (hid->driver && hid->driver->suspend) {
status = hid->driver->suspend(hid, message);
if (status < 0)
goto failed;
}
driver_suspended = true;
} else {
usbhid_mark_busy(usbhid);
spin_unlock_irq(&usbhid->lock);
return -EBUSY;
}
} else {
/* TODO: resume() might need to handle suspend failure */
if (hid->driver && hid->driver->suspend)
status = hid->driver->suspend(hid, message);
driver_suspended = true;
spin_lock_irq(&usbhid->lock);
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
if (usbhid_wait_io(hid) < 0)
status = -EIO;
}
hid_cancel_delayed_stuff(usbhid);
hid_cease_io(usbhid);
if (PMSG_IS_AUTO(message) && test_bit(HID_KEYS_PRESSED, &usbhid->iofl)) {
/* lost race against keypresses */
status = -EBUSY;
goto failed;
}
dev_dbg(&intf->dev, "suspend\n");
return status;
failed:
hid_resume_common(hid, driver_suspended);
return status;
}
static int hid_resume(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
int status;
if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
status = hid_resume_common(hid, true);
dev_dbg(&intf->dev, "resume status %d\n", status);
USB: add reset_resume method This patch (as918) introduces a new USB driver method: reset_resume. It is called when a device needs to be reset as part of a resume procedure (whether because of a device quirk or because of the USB-Persist facility), thereby taking over a role formerly assigned to the post_reset method. As a consequence, post_reset no longer needs an argument indicating whether it is being called as part of a reset-resume. This separation of functions makes the code clearer. In addition, the pre_reset and post_reset method return types are changed; they now must return an error code. The return value is unused at present, but at some later time we may unbind drivers and re-probe if they encounter an error during reset handling. The existing pre_reset and post_reset methods in the usbhid, usb-storage, and hub drivers are updated to match the new requirements. For usbhid the post_reset routine is also used for reset_resume (duplicate method pointers); for the other drivers a new reset_resume routine is added. The change to hub.c looks bigger than it really is, because mark_children_for_reset_resume() gets moved down next to the new hub_reset_resume() routine. A minor change to usb-storage makes the usb_stor_report_bus_reset() routine acquire the host lock instead of requiring the caller to hold it already. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 03:38:16 +08:00
return 0;
}
static int hid_reset_resume(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata(intf);
struct usbhid_device *usbhid = hid->driver_data;
int status;
clear_bit(HID_SUSPENDED, &usbhid->iofl);
status = hid_post_reset(intf);
if (status >= 0 && hid->driver && hid->driver->reset_resume) {
int ret = hid->driver->reset_resume(hid);
if (ret < 0)
status = ret;
}
return status;
}
#endif /* CONFIG_PM */
static const struct usb_device_id hid_usb_ids[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
.bInterfaceClass = USB_INTERFACE_CLASS_HID },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, hid_usb_ids);
static struct usb_driver hid_driver = {
.name = "usbhid",
.probe = usbhid_probe,
.disconnect = usbhid_disconnect,
#ifdef CONFIG_PM
.suspend = hid_suspend,
.resume = hid_resume,
.reset_resume = hid_reset_resume,
#endif
.pre_reset = hid_pre_reset,
.post_reset = hid_post_reset,
.id_table = hid_usb_ids,
.supports_autosuspend = 1,
};
struct usb_interface *usbhid_find_interface(int minor)
{
return usb_find_interface(&hid_driver, minor);
}
static int __init hid_init(void)
{
int retval = -ENOMEM;
retval = usbhid_quirks_init(quirks_param);
if (retval)
goto usbhid_quirks_init_fail;
retval = usb_register(&hid_driver);
if (retval)
goto usb_register_fail;
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return 0;
usb_register_fail:
usbhid_quirks_exit();
usbhid_quirks_init_fail:
return retval;
}
static void __exit hid_exit(void)
{
usb_deregister(&hid_driver);
usbhid_quirks_exit();
}
module_init(hid_init);
module_exit(hid_exit);
MODULE_AUTHOR("Andreas Gal");
MODULE_AUTHOR("Vojtech Pavlik");
MODULE_AUTHOR("Jiri Kosina");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);