linux-sg2042/drivers/iommu/Makefile

26 lines
1.1 KiB
Makefile
Raw Normal View History

obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_IOMMU_API) += iommu-traces.o
obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
obj-$(CONFIG_IOMMU_IO_PGTABLE) += io-pgtable.o
obj-$(CONFIG_IOMMU_IO_PGTABLE_LPAE) += io-pgtable-arm.o
obj-$(CONFIG_IOMMU_IOVA) += iova.o
obj-$(CONFIG_OF_IOMMU) += of_iommu.o
obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o msm_iommu_dev.o
obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o
obj-$(CONFIG_AMD_IOMMU_V2) += amd_iommu_v2.o
obj-$(CONFIG_ARM_SMMU) += arm-smmu.o
obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o
obj-$(CONFIG_DMAR_TABLE) += dmar.o
obj-$(CONFIG_INTEL_IOMMU) += intel-iommu.o
obj-$(CONFIG_IPMMU_VMSA) += ipmmu-vmsa.o
obj-$(CONFIG_IRQ_REMAP) += intel_irq_remapping.o irq_remapping.o
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
iommu/rockchip: rk3288 iommu driver The rk3288 has several iommus. Each iommu belongs to a single master device. There is one device (ISP) that has two slave iommus, but that case is not yet supported by this driver. At subsys init, the iommu driver registers itself as the iommu driver for the platform bus. The master devices find their slave iommus using the "iommus" field in their devicetree description. Since each slave iommu belongs to exactly one master, their is no additional data needed at probe to associate a slave with its master. An iommu device's power domain, clock and irq are all shared with its master device, and the master device must be careful to attach from the iommu only after powering and clocking it (and leave it powered and clocked before detaching). Because their is no guarantee what the status of the iommu is at probe, and since the driver does not even know if the device is powered, we delay requesting its irq until the master device attaches, at which point we have a guarantee that the device is powered and clocked and we can reset it and disable its interrupt mask. An iommu_domain describes a virtual iova address space. Each iommu_domain has a corresponding page table that lists the mappings from iova to physical address. For the rk3288 iommu, the page table has two levels: The Level 1 "directory_table" has 1024 4-byte dte entries. Each dte points to a level 2 "page_table". Each level 2 page_table has 1024 4-byte pte entries. Each pte points to a 4 KiB page of memory. An iommu_domain is created when a dma_iommu_mapping is created via arm_iommu_create_mapping. Master devices can then attach themselves to this mapping (or attach the mapping to themselves?) by calling arm_iommu_attach_device(). This in turn instructs the iommu driver to write the page table's physical address into the slave iommu's "Directory Table Entry" (DTE) register. In fact multiple master devices, each with their own slave iommu device, can all attach to the same mapping. The iommus for these devices will share the same iommu_domain and therefore point to the same page table. Thus, the iommu domain maintains a list of iommu devices which are attached. This driver relies on the iommu core to ensure that all devices have detached before destroying a domain. v6: - add .add/remove_device() callbacks. - parse platform_device device tree nodes for "iommus" property - store platform device pointer as group iommudata - Check for existence of iommu group instead of relying on a dev_get_drvdata() to return NULL for a NULL device. v7: - fixup some strings. - In rk_iommu_disable_paging() # and % were reversed. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-11-03 10:53:27 +08:00
obj-$(CONFIG_ROCKCHIP_IOMMU) += rockchip-iommu.o
obj-$(CONFIG_TEGRA_IOMMU_GART) += tegra-gart.o
obj-$(CONFIG_TEGRA_IOMMU_SMMU) += tegra-smmu.o
obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
obj-$(CONFIG_SHMOBILE_IOMMU) += shmobile-iommu.o
obj-$(CONFIG_SHMOBILE_IPMMU) += shmobile-ipmmu.o
iommu/fsl: Freescale PAMU driver and iommu implementation. Following is a brief description of the PAMU hardware: PAMU determines what action to take and whether to authorize the action on the basis of the memory address, a Logical IO Device Number (LIODN), and PAACT table (logically) indexed by LIODN and address. Hardware devices which need to access memory must provide an LIODN in addition to the memory address. Peripheral Access Authorization and Control Tables (PAACTs) are the primary data structures used by PAMU. A PAACT is a table of peripheral access authorization and control entries (PAACE).Each PAACE defines the range of I/O bus address space that is accessible by the LIOD and the associated access capabilities. There are two types of PAACTs: primary PAACT (PPAACT) and secondary PAACT (SPAACT).A given physical I/O device may be able to act as one or more independent logical I/O devices (LIODs). Each such logical I/O device is assigned an identifier called logical I/O device number (LIODN). A LIODN is allocated a contiguous portion of the I/O bus address space called the DSA window for performing DSA operations. The DSA window may optionally be divided into multiple sub-windows, each of which may be used to map to a region in system storage space. The first sub-window is referred to as the primary sub-window and the remaining are called secondary sub-windows. This patch provides the PAMU driver (fsl_pamu.c) and the corresponding IOMMU API implementation (fsl_pamu_domain.c). The PAMU hardware driver (fsl_pamu.c) has been derived from the work done by Ashish Kalra and Timur Tabi. [For iommu group support] Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Timur Tabi <timur@tabi.org> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-07-15 12:50:57 +08:00
obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o