License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2006-12-13 16:34:23 +08:00
|
|
|
#ifndef _LINUX_SLAB_DEF_H
|
|
|
|
#define _LINUX_SLAB_DEF_H
|
|
|
|
|
reciprocal_divide: update/correction of the algorithm
Jakub Zawadzki noticed that some divisions by reciprocal_divide()
were not correct [1][2], which he could also show with BPF code
after divisions are transformed into reciprocal_value() for runtime
invariance which can be passed to reciprocal_divide() later on;
reverse in BPF dump ended up with a different, off-by-one K in
some situations.
This has been fixed by Eric Dumazet in commit aee636c4809fa5
("bpf: do not use reciprocal divide"). This follow-up patch
improves reciprocal_value() and reciprocal_divide() to work in
all cases by using Granlund and Montgomery method, so that also
future use is safe and without any non-obvious side-effects.
Known problems with the old implementation were that division by 1
always returned 0 and some off-by-ones when the dividend and divisor
where very large. This seemed to not be problematic with its
current users, as far as we can tell. Eric Dumazet checked for
the slab usage, we cannot surely say so in the case of flex_array.
Still, in order to fix that, we propose an extension from the
original implementation from commit 6a2d7a955d8d resp. [3][4],
by using the algorithm proposed in "Division by Invariant Integers
Using Multiplication" [5], Torbjörn Granlund and Peter L.
Montgomery, that is, pseudocode for q = n/d where q, n, d is in
u32 universe:
1) Initialization:
int l = ceil(log_2 d)
uword m' = floor((1<<32)*((1<<l)-d)/d)+1
int sh_1 = min(l,1)
int sh_2 = max(l-1,0)
2) For q = n/d, all uword:
uword t = (n*m')>>32
q = (t+((n-t)>>sh_1))>>sh_2
The assembler implementation from Agner Fog [6] also helped a lot
while implementing. We have tested the implementation on x86_64,
ppc64, i686, s390x; on x86_64/haswell we're still half the latency
compared to normal divide.
Joint work with Daniel Borkmann.
[1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c
[2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c
[3] https://gmplib.org/~tege/division-paper.pdf
[4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html
[5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556
[6] http://www.agner.org/optimize/asmlib.zip
Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Jesse Gross <jesse@nicira.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
|
|
|
#include <linux/reciprocal_div.h>
|
|
|
|
|
2006-12-13 16:34:23 +08:00
|
|
|
/*
|
|
|
|
* Definitions unique to the original Linux SLAB allocator.
|
2008-05-10 02:32:44 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
struct kmem_cache {
|
2014-10-10 06:26:27 +08:00
|
|
|
struct array_cache __percpu *cpu_cache;
|
|
|
|
|
2014-01-21 09:12:42 +08:00
|
|
|
/* 1) Cache tunables. Protected by slab_mutex */
|
2008-05-10 02:32:44 +08:00
|
|
|
unsigned int batchcount;
|
|
|
|
unsigned int limit;
|
|
|
|
unsigned int shared;
|
|
|
|
|
2012-06-13 23:24:57 +08:00
|
|
|
unsigned int size;
|
reciprocal_divide: update/correction of the algorithm
Jakub Zawadzki noticed that some divisions by reciprocal_divide()
were not correct [1][2], which he could also show with BPF code
after divisions are transformed into reciprocal_value() for runtime
invariance which can be passed to reciprocal_divide() later on;
reverse in BPF dump ended up with a different, off-by-one K in
some situations.
This has been fixed by Eric Dumazet in commit aee636c4809fa5
("bpf: do not use reciprocal divide"). This follow-up patch
improves reciprocal_value() and reciprocal_divide() to work in
all cases by using Granlund and Montgomery method, so that also
future use is safe and without any non-obvious side-effects.
Known problems with the old implementation were that division by 1
always returned 0 and some off-by-ones when the dividend and divisor
where very large. This seemed to not be problematic with its
current users, as far as we can tell. Eric Dumazet checked for
the slab usage, we cannot surely say so in the case of flex_array.
Still, in order to fix that, we propose an extension from the
original implementation from commit 6a2d7a955d8d resp. [3][4],
by using the algorithm proposed in "Division by Invariant Integers
Using Multiplication" [5], Torbjörn Granlund and Peter L.
Montgomery, that is, pseudocode for q = n/d where q, n, d is in
u32 universe:
1) Initialization:
int l = ceil(log_2 d)
uword m' = floor((1<<32)*((1<<l)-d)/d)+1
int sh_1 = min(l,1)
int sh_2 = max(l-1,0)
2) For q = n/d, all uword:
uword t = (n*m')>>32
q = (t+((n-t)>>sh_1))>>sh_2
The assembler implementation from Agner Fog [6] also helped a lot
while implementing. We have tested the implementation on x86_64,
ppc64, i686, s390x; on x86_64/haswell we're still half the latency
compared to normal divide.
Joint work with Daniel Borkmann.
[1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c
[2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c
[3] https://gmplib.org/~tege/division-paper.pdf
[4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html
[5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556
[6] http://www.agner.org/optimize/asmlib.zip
Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Jesse Gross <jesse@nicira.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 09:29:41 +08:00
|
|
|
struct reciprocal_value reciprocal_buffer_size;
|
2011-07-21 01:04:23 +08:00
|
|
|
/* 2) touched by every alloc & free from the backend */
|
2008-05-10 02:32:44 +08:00
|
|
|
|
2017-11-16 09:32:18 +08:00
|
|
|
slab_flags_t flags; /* constant flags */
|
2008-05-10 02:32:44 +08:00
|
|
|
unsigned int num; /* # of objs per slab */
|
|
|
|
|
2011-07-21 01:04:23 +08:00
|
|
|
/* 3) cache_grow/shrink */
|
2008-05-10 02:32:44 +08:00
|
|
|
/* order of pgs per slab (2^n) */
|
|
|
|
unsigned int gfporder;
|
|
|
|
|
|
|
|
/* force GFP flags, e.g. GFP_DMA */
|
2012-06-14 20:17:21 +08:00
|
|
|
gfp_t allocflags;
|
2008-05-10 02:32:44 +08:00
|
|
|
|
|
|
|
size_t colour; /* cache colouring range */
|
|
|
|
unsigned int colour_off; /* colour offset */
|
2013-10-24 09:07:49 +08:00
|
|
|
struct kmem_cache *freelist_cache;
|
|
|
|
unsigned int freelist_size;
|
2008-05-10 02:32:44 +08:00
|
|
|
|
|
|
|
/* constructor func */
|
|
|
|
void (*ctor)(void *obj);
|
|
|
|
|
2011-07-21 01:04:23 +08:00
|
|
|
/* 4) cache creation/removal */
|
2008-05-10 02:32:44 +08:00
|
|
|
const char *name;
|
2012-06-13 23:24:57 +08:00
|
|
|
struct list_head list;
|
|
|
|
int refcount;
|
|
|
|
int object_size;
|
|
|
|
int align;
|
2008-05-10 02:32:44 +08:00
|
|
|
|
2011-07-21 01:04:23 +08:00
|
|
|
/* 5) statistics */
|
2008-05-10 02:32:44 +08:00
|
|
|
#ifdef CONFIG_DEBUG_SLAB
|
|
|
|
unsigned long num_active;
|
|
|
|
unsigned long num_allocations;
|
|
|
|
unsigned long high_mark;
|
|
|
|
unsigned long grown;
|
|
|
|
unsigned long reaped;
|
|
|
|
unsigned long errors;
|
|
|
|
unsigned long max_freeable;
|
|
|
|
unsigned long node_allocs;
|
|
|
|
unsigned long node_frees;
|
|
|
|
unsigned long node_overflow;
|
|
|
|
atomic_t allochit;
|
|
|
|
atomic_t allocmiss;
|
|
|
|
atomic_t freehit;
|
|
|
|
atomic_t freemiss;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If debugging is enabled, then the allocator can add additional
|
2018-06-08 08:05:24 +08:00
|
|
|
* fields and/or padding to every object. 'size' contains the total
|
|
|
|
* object size including these internal fields, while 'obj_offset'
|
|
|
|
* and 'object_size' contain the offset to the user object and its
|
|
|
|
* size.
|
2008-05-10 02:32:44 +08:00
|
|
|
*/
|
|
|
|
int obj_offset;
|
|
|
|
#endif /* CONFIG_DEBUG_SLAB */
|
2016-01-21 07:02:32 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_MEMCG
|
2015-02-13 06:59:20 +08:00
|
|
|
struct memcg_cache_params memcg_params;
|
2012-12-19 06:22:27 +08:00
|
|
|
#endif
|
2016-03-26 05:21:59 +08:00
|
|
|
#ifdef CONFIG_KASAN
|
|
|
|
struct kasan_cache kasan_info;
|
|
|
|
#endif
|
2008-05-10 02:32:44 +08:00
|
|
|
|
2016-05-20 08:10:37 +08:00
|
|
|
#ifdef CONFIG_SLAB_FREELIST_RANDOM
|
2016-07-27 06:21:56 +08:00
|
|
|
unsigned int *random_seq;
|
2016-05-20 08:10:37 +08:00
|
|
|
#endif
|
|
|
|
|
2018-04-06 07:21:31 +08:00
|
|
|
unsigned int useroffset; /* Usercopy region offset */
|
|
|
|
unsigned int usersize; /* Usercopy region size */
|
usercopy: Prepare for usercopy whitelisting
This patch prepares the slab allocator to handle caches having annotations
(useroffset and usersize) defining usercopy regions.
This patch is modified from Brad Spengler/PaX Team's PAX_USERCOPY
whitelisting code in the last public patch of grsecurity/PaX based on
my understanding of the code. Changes or omissions from the original
code are mine and don't reflect the original grsecurity/PaX code.
Currently, hardened usercopy performs dynamic bounds checking on slab
cache objects. This is good, but still leaves a lot of kernel memory
available to be copied to/from userspace in the face of bugs. To further
restrict what memory is available for copying, this creates a way to
whitelist specific areas of a given slab cache object for copying to/from
userspace, allowing much finer granularity of access control. Slab caches
that are never exposed to userspace can declare no whitelist for their
objects, thereby keeping them unavailable to userspace via dynamic copy
operations. (Note, an implicit form of whitelisting is the use of constant
sizes in usercopy operations and get_user()/put_user(); these bypass
hardened usercopy checks since these sizes cannot change at runtime.)
To support this whitelist annotation, usercopy region offset and size
members are added to struct kmem_cache. The slab allocator receives a
new function, kmem_cache_create_usercopy(), that creates a new cache
with a usercopy region defined, suitable for declaring spans of fields
within the objects that get copied to/from userspace.
In this patch, the default kmem_cache_create() marks the entire allocation
as whitelisted, leaving it semantically unchanged. Once all fine-grained
whitelists have been added (in subsequent patches), this will be changed
to a usersize of 0, making caches created with kmem_cache_create() not
copyable to/from userspace.
After the entire usercopy whitelist series is applied, less than 15%
of the slab cache memory remains exposed to potential usercopy bugs
after a fresh boot:
Total Slab Memory: 48074720
Usercopyable Memory: 6367532 13.2%
task_struct 0.2% 4480/1630720
RAW 0.3% 300/96000
RAWv6 2.1% 1408/64768
ext4_inode_cache 3.0% 269760/8740224
dentry 11.1% 585984/5273856
mm_struct 29.1% 54912/188448
kmalloc-8 100.0% 24576/24576
kmalloc-16 100.0% 28672/28672
kmalloc-32 100.0% 81920/81920
kmalloc-192 100.0% 96768/96768
kmalloc-128 100.0% 143360/143360
names_cache 100.0% 163840/163840
kmalloc-64 100.0% 167936/167936
kmalloc-256 100.0% 339968/339968
kmalloc-512 100.0% 350720/350720
kmalloc-96 100.0% 455616/455616
kmalloc-8192 100.0% 655360/655360
kmalloc-1024 100.0% 812032/812032
kmalloc-4096 100.0% 819200/819200
kmalloc-2048 100.0% 1310720/1310720
After some kernel build workloads, the percentage (mainly driven by
dentry and inode caches expanding) drops under 10%:
Total Slab Memory: 95516184
Usercopyable Memory: 8497452 8.8%
task_struct 0.2% 4000/1456000
RAW 0.3% 300/96000
RAWv6 2.1% 1408/64768
ext4_inode_cache 3.0% 1217280/39439872
dentry 11.1% 1623200/14608800
mm_struct 29.1% 73216/251264
kmalloc-8 100.0% 24576/24576
kmalloc-16 100.0% 28672/28672
kmalloc-32 100.0% 94208/94208
kmalloc-192 100.0% 96768/96768
kmalloc-128 100.0% 143360/143360
names_cache 100.0% 163840/163840
kmalloc-64 100.0% 245760/245760
kmalloc-256 100.0% 339968/339968
kmalloc-512 100.0% 350720/350720
kmalloc-96 100.0% 563520/563520
kmalloc-8192 100.0% 655360/655360
kmalloc-1024 100.0% 794624/794624
kmalloc-4096 100.0% 819200/819200
kmalloc-2048 100.0% 1257472/1257472
Signed-off-by: David Windsor <dave@nullcore.net>
[kees: adjust commit log, split out a few extra kmalloc hunks]
[kees: add field names to function declarations]
[kees: convert BUGs to WARNs and fail closed]
[kees: add attack surface reduction analysis to commit log]
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Christoph Lameter <cl@linux.com>
2017-06-11 10:50:28 +08:00
|
|
|
|
2014-10-10 06:26:27 +08:00
|
|
|
struct kmem_cache_node *node[MAX_NUMNODES];
|
2008-05-10 02:32:44 +08:00
|
|
|
};
|
|
|
|
|
2016-03-26 05:21:59 +08:00
|
|
|
static inline void *nearest_obj(struct kmem_cache *cache, struct page *page,
|
2016-07-29 06:49:07 +08:00
|
|
|
void *x)
|
|
|
|
{
|
2016-03-26 05:21:59 +08:00
|
|
|
void *object = x - (x - page->s_mem) % cache->size;
|
|
|
|
void *last_object = page->s_mem + (cache->num - 1) * cache->size;
|
|
|
|
|
|
|
|
if (unlikely(object > last_object))
|
|
|
|
return last_object;
|
|
|
|
else
|
|
|
|
return object;
|
|
|
|
}
|
|
|
|
|
2018-12-28 16:30:46 +08:00
|
|
|
/*
|
|
|
|
* We want to avoid an expensive divide : (offset / cache->size)
|
|
|
|
* Using the fact that size is a constant for a particular cache,
|
|
|
|
* we can replace (offset / cache->size) by
|
|
|
|
* reciprocal_divide(offset, cache->reciprocal_buffer_size)
|
|
|
|
*/
|
|
|
|
static inline unsigned int obj_to_index(const struct kmem_cache *cache,
|
|
|
|
const struct page *page, void *obj)
|
|
|
|
{
|
|
|
|
u32 offset = (obj - page->s_mem);
|
|
|
|
return reciprocal_divide(offset, cache->reciprocal_buffer_size);
|
|
|
|
}
|
|
|
|
|
2006-12-13 16:34:23 +08:00
|
|
|
#endif /* _LINUX_SLAB_DEF_H */
|