hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/usb/dwc3/Makefile

40 lines
1.1 KiB
Makefile
Raw Normal View History

usb: dwc3: add tracepoints to aid debugging When we're debugging hard-to-reproduce and time-sensitive use cases, printk() poses too much overhead. That's when the kernel's tracing infrastructure comes into play. This patch implements a few initial tracepoints for the dwc3 driver. More traces can be added as necessary in order to ease the task of debugging dwc3. Reviewed-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-01 06:45:10 +08:00
# define_trace.h needs to know how to find our header
CFLAGS_trace.o := -I$(src)
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 23:10:58 +08:00
ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_DWC3) += dwc3.o
usb: dwc3: add tracepoints to aid debugging When we're debugging hard-to-reproduce and time-sensitive use cases, printk() poses too much overhead. That's when the kernel's tracing infrastructure comes into play. This patch implements a few initial tracepoints for the dwc3 driver. More traces can be added as necessary in order to ease the task of debugging dwc3. Reviewed-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-01 06:45:10 +08:00
dwc3-y := core.o debug.o trace.o
usb: dwc3: remove dwc3 dependency on host AND gadget. DWC3 controller curretly depends on USB && USB_GADGET. Some hardware may like to use only host feature on dwc3, or only gadget feature. So, removing this dependency of USB_DWC3 on USB and USB_GADGET. Adding the mode of operaiton of DWC3 also here HOST/GADGET/DUAL_ROLE based on which features are enabled. [ balbi@ti.com : . make sure we have default modes for all possible Kernel configurations. . Remove the config -> menuconfig change as it's unnecessary . switch over to IS_ENABLED() ] CC: Doug Anderson <dianders@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-15 18:39:21 +08:00
ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
dwc3-y += host.o
endif
ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
dwc3-y += gadget.o ep0.o
endif
usb: dwc3: add xHCI Host support The Designware USB3 IP can be configured with an internal xHCI. If we're running on such a version, let's start the xHCI stack. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-12 19:08:26 +08:00
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 23:10:58 +08:00
ifneq ($(CONFIG_DEBUG_FS),)
dwc3-y += debugfs.o
endif
##
# Platform-specific glue layers go here
#
# NOTICE: Make sure your glue layer doesn't depend on anything
# which is arch-specific and that it compiles on all situations.
#
# We want to keep this requirement in order to be able to compile
# the entire driver (with all its glue layers) on several architectures
# and make sure it compiles fine. This will also help with allmodconfig
# and allyesconfig builds.
##
usb: dwc3: make glue layers selectable Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-26 20:14:06 +08:00
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o
obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
usb: dwc3: add Keystone specific glue layer Add Keystone platform specific glue layer to support USB3 Host mode. [ balbi@ti.com : fix order of clk_disable() and platform_device_unregister() ] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-13 01:25:29 +08:00
obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
usb: dwc3: Add Qualcomm DWC3 glue layer driver DWC3 glue layer is hardware layer around Synopsys DesignWare USB3 core. Its purpose is to supply Synopsys IP with required clocks, voltages and interface it with the rest of the SoC. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-13 03:28:07 +08:00
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It manages the powerdown signal, and configures the internal glue logic and syscfg registers. [ balbi@ti.com : actually switch over to of_platform_depopulate() ] Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 23:36:30 +08:00
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o