rpm/rpm.8

.\" rpm - Red Hat Package Manager
.TH rpm 8 "22 December 1998" "Red Hat Software" "Red Hat Linux"
.SH NAME
rpm \- Red Hat Package Manager
.SH SYNOPSIS
\fBrpm\fP [options] 
.SH DESCRIPTION
\fBrpm\fP is a powerful \fIpackage manager\fP, which can be used to
build, install, query, verify, update, and uninstall individual
software packages.  A \fIpackage\fP consists of an archive of files,
and package information, including name, version, and description.

One of the following basic modes must be selected:
\fIInitialize Database\fP, \fIRebuild Database\fP, \fIBuild Package\fP, 
\fIRecompile Package\fP, \fIBuild Package from Tarball\fP, 
\fIQuery\fP, \fIShow Querytags\fP, \fIInstall\fP, \fIFreshen\fP, 
\fIUninstall\fP, \fIVerify\fP, \fISignature Check\fP, \fIResign\fP, 
\fIAdd Signature\fP, \fIset owners and groups\fR and \fIShow
Configuration\fP.



Database maintenance:
.br
.I "\fB    rpm \-i [\-\-initdb]\fP"
.br
.I "\fB    rpm \-i [\-\-rebuilddb]\fP"

Building:
.br
.I "\fB    rpm [\-b|t] [package_spec]+\fP"
.br
.I "\fB    rpm [\-\-rebuild] [sourcerpm]+\fP"
.br
.I "\fB    rpm [\-\-tarbuild] [tarredsource]+\fP"
.br

Querying:
.br
.I "\fB    rpm [\-\-query] [queryoptions]\fP"
.br
.I "\fB    rpm [\-\-querytags]\fP"
.br

Maintaining installed packages:
.br
.I "\fB    rpm [\-\-install] [installoptions] [package_file]+\fP"
.br
.I "\fB    rpm [\-\-freshen|\-F] [installoptions] [package_file]+\fP"
.br
.I "\fB    rpm [\-\-uninstall|\-e] [uninstalloptions] [package]+\fP"
.br
.I "\fB    rpm [\-\-verify|\-V] [verifyoptions] [package]+\fP"
.br

Signatures:
.br
.I "\fB    rpm [\-\-verify|\-V] [verifyoptions] [package]+\fP"
.br
.I "\fB    rpm [\-\-resign] [package_file]+\fP"
.br
.I "\fB    rpm [\-\-addsign] [package_file]+\fP"
.br

Miscelaneous:
.br
.I "\fB    rpm [\-\-showrc]\fP"
.br
.I "\fB    rpm [\-\-setperms] [package]+\fP"
.br
.I "\fB    rpm [\-\-setgids] [package]+\fP"
.br


.SH GENERAL OPTIONS
These options can be used in all the different modes.
.IP "\fB\-vv\fP"
Print lots of ugly debugging information.
.IP "\fB\-\-quiet\fP"
Print as little as possible \- normally only error messages will be
displayed.
.IP "\fB\-\-help\fP"
Print a longer usage message then normal.
.IP "\fB\-\-version\fP"
Print a single line containing the version number of rpm being used.
.IP "\fB\-\-rcfile <file>\fP"
Use \fB<file>\fP instead of  \fB/etc/rpmrc\fP and
\fB$HOME/.rpmrc\fP.
.IP "\fB\-\-root \fI<dir>\fP"
Use the system rooted at \fI<dir>\fP for all operations.  Note that
this means the database will be read or modified under \fI<dir>\fP and
any \fIpre\fP or \fIpost\fP scripts are run after a chroot() to \fI<dir>\fP.
.IP "\fB\-\-dbpath <path>\fP"
Use RPM database in <path>.
.IP "\fB\-\-justdbfP"
Update only the database, not the filesystem.
.IP "\fB\-\-ftpproxy <host>\fP"
Use <host> as an FTP proxy. See \fBFTP OPTIONS\fP.
.IP "\fB\-\-ftpport <port>\fP"
Use <port> as the FTP port. See \fBFTP OPTIONS\fP.
.IP "\fB\-\-pipe <cmd>\fP"
Pipes the output of rpm to the command <cmd>.

.SH INSTALL AND UPGRADE OPTIONS
The general form of an rpm install command is
.PP
	\fBrpm \-i [install\-options] <package_file>+\fP
.PP
This installs a new package.
The general form of an rpm upgrade command is
.PP
	\fBrpm \-U [install\-options] <package_file>+\fP
.PP
This upgrades or installs the package currently installed to the version
in the new RPM.  This is the same as install, except all other version of
the package are removed from the system. 
.PP
	\fBrpm [\-F|--freshen] [install\-options] <package_file>+\fP
.PP
This will upgrade packages, but only if an earlier version currently
exists.


The <package_file> may be specified as an ftp style URL, in which case
the package will be downloaded before being installed. See \fBFTP
OPTIONS\fP for information on RPM's built in ftp support.
.PP
.IP "\fB\-\-force\fP"
Same as using both \-\-replacepkgs, \-\-replacefiles, and 
\-\-oldpackage.
.IP "\fB\-h, \-\-hash\fP"
Print 50 hash marks as the package archive is unpacked.  Use
with \fB\-v\fP for a nice display.
.IP "\fB\-\-oldpackage\fP"
Allow an upgrade to replace a newer package with an older one.
.IP "\fB\-\-percent\fP"
Print percentages as files are unpacked from the package archive. This
is intended to make RPM easy to run from other tools.
.IP "\fB\-\-replacefiles\fP"
Install the packages even if they replace files from other, already
installed, packages.
.IP "\fB\-\-replacepkgs\fP"
Install the packages even if some of them are already installed on this
system.
.IP "\fB\-\-allfiles\fP"
Installs or upgrades all the missingok files in the package, regardless if
they exist.
.IP "\fB\-\-nodeps\fP"
Don't do a dependency check before installing to upgrading a package.
.IP "\fB\-\-noscripts\fP"
Don't execute the preinstall or postinstall scripts.
.IP "\fB\-\-notriggers\fP"
Don't execute scripts which are triggered by the installation of this package.
.IP "\fB\-\-excludedocs\fP"
Don't install any files which are marked as documentation (which includes
man pages and texinfo documents).
.IP "\fB\-\-includedocs\fP"
Install documentation files. This is only needed if \fIexcludedocs: 1\fP
is specified in an rpmrc file.
.IP "\fB\-\-test\fP"
Do not install the package, simply check for and report potential
conflicts.
.IP "\fB\-\-ignorearch\fP"
This allows installation or upgrading even if the architectures of the
binary RPM and host don't match.
.IP "\fB\-\-ignoreos\fP"
This allows installation or upgrading even if the operating systems of the
binary RPM and host don't match.
.IP "\fB\-\-prefix <path>\fP"
This sets the installation prefix to <path> for relocatable packages.
.IP "\fB\-\-relocate <oldpath>=<newpath>\fP"
For relocatable packages, translates the files that would be put in
<oldpath> to <newpath>.
.IP "\fB\-\-badreloc\fP"
To be used in conjunction with \-\-relocate, this forces the relocation
even if the package isn't relocatable.
.IP "\fB\-\-noorder\fP"
Don't reorder the packages for an install. The list of packages would
normally be reordered to satisfy dependancies.


.SH QUERY OPTIONS
The general form of an rpm query command is
.PP
	\fBrpm \-q [query\-options]\fP
.PP
You may specify the format that package information should be printed 
in. To do this, you use the \fB[\-\-queryformat|\-qf]\fP option, followed
by the format string.

Query formats are modifed versions of the standard \fBprintf(3)\fP
formatting. The format is made up of static strings (which may include
standard C character escapes for newlines, tabs, and other special
characters) and \fBprintf(3)\fP type formatters. As \fBrpm\fP
already knows the type to print, the type specifier must be
omitted however, and replaced by the name of the header tag to
be printed, enclosed by \fB{}\fP characters. The 
\fBRPMTAG_\fP portion of the tag name may be omitted.

Alternate output formats may be requested by following the tag with
\fB:\fItypetag\fR. Currently, the following types are supported: \fBoctal\fR,
\fBdate\fR, \fBshescape\fR, \fBperms\fR, \fBfflags\fR, and \fBdepflags\fR.

For example, to print only the names of the packages queried, you
could use \fB%{NAME}\fP as the format string. To print the packages
name and distribution information in two columns, you could use
\fB%\-30{NAME}%{DISTRIBUTION}\fP.

\fBrpm\fP will print a list of all of the tags it knows about when
it is invoked with the \fB\-\-querytags\fP argument.

There are two subsets of options for querying: package selection, and
information selection.

Package selection options:
.br
.IP "\fB\fI<package_name>\fP"
Query installed package named \fB\fI<package_name>\fP.
.IP "\fB\-a\fP"
Query all installed packages
.IP "\fB\-\-whatrequires \fI<capability>\fP"
Query all packages that requires \fI<capability>\fP for proper functioning.
.IP "\fB\-\-whatprovides \fI<virtual>\fP"
Query all packages that provide the \fI<virtual>\fP capability.
.IP "\fB\-f \fI<file>\fP"
Query package owning \fI<file>\fP.
.IP "\fB\-\-group \fI<group>\fP"
Query packages with the group of \fI<group>\fP.
.IP "\fB\-p \fI<package_file>\fP"
Query an (uninstalled) package \fI<package_file>\fP. 
The <package_file> may be specified as an ftp style URL, in which case
the package header will be downloaded and queried. See \fBFTP
OPTIONS\fP for information on RPM's built in ftp support.
.IP "\fB\-\-querybynumber \fI<num>\fP"
Query the <num>th database entry directly; this is helpful for debugging 
purposes.
.IP "\fB\-\-triggeredby \fI<pkg>\fP"
Query packages that are triggered by packages <pkg>.

.P
Information selection options:
.br
.IP "\fB\-i\fP"
Display package information, including name, version, and description. This
uses the \fB\-\-queryformat\fP if one was specified.
.IP "\fB\-R\fP"
List packages this one depends on (same as \fB\-\-requires\fP).
.IP "\fB\-\-provides\fP"
List capabilities this package provides.
.IP "\fB\-\-changelog\fP"
Display change information for the package.
.IP "\fB\-l\fP"
List files in package.
.IP "\fB\-s\fP"
Display the \fIstates\fP of files in the package (implies \fB\-l\fP).  
The state of each file is
either \fInormal\fP, \fInot installed\fP, or \fIreplaced\fP.
.IP "\fB\-d\fP"
List only documentation files (implies \fB\-l\fP).  
.IP "\fB\-c\fP"
List only configuration files (implies \fB\-l\fP).  
.IP "\fB\-\-scripts\fP"
List the package specific shell scripts that are used as part of the 
installation and uninstallation processes, if there are any.
.IP "\fB\-\-triggers\fP"
Display the trigger scripts, if any, which are contained in the package.
.IP "\fB\-\-dump\fP"
Dump file information as follows: path size mtime md5sum mode
owner group isconfig isdoc rdev symlink. This must be used with
at least one of \fB\-l\fP, \fB\-c\fP, \fB\-d\fP.
.IP "\fB\-\-last\fP"
Orders the package listing by install time such that the latest packages
are at the top.
.IP "\fB\-\-querybypkg\fP"
This lists all the files in each package.
.IP "\fB\-\-triggerscripts\fP"
Shows all the trigger scripts for the selected packages.

.SH VERIFY OPTIONS
The general form of an rpm verify command is
.PP
	\fBrpm \-V|\-y|\-\-verify [verify\-options]\fP
.PP
Verifying a package compares information about the installed
files in the package with information about the files taken from the
original package and stored in the rpm database.  Among other things,
verifying compares the size, MD5 sum, permissions, type, owner and group
of each file.  Any discrepencies are displayed.  The package specification
options are the same as for package querying.

Files that were not installed from the package, for example documentation
files excluded on installation using the "\fB\-\-excludedocs\fP" option,
will be silently ignored.

Options that can be used in verify mode:

.IP "\fB\-\-nofiles\fP"
Ignores missing files when verifying.
.IP "\fB\-\-nomd5\fP"
Ignores MD5 checksum errors when verifying.
.IP "\fB\-\-nopgp\fP"
Ignores PGP checking errors when verifying.
.IP "\fB\-\-nofiles\fP"
Ignores missing files when verifying.


The format of the output is a string of 8 characters, a possible "\fBc\fP"
denoting a configuration file, and then the file name.  Each of the 8
characters denotes the result of a comparison of one attribute of the file
to the value of that attribute recorded in the RPM database.  A 
single "\fB.\fP" (period) means the test passed.  The following characters 
denote failure of certain tests:

.IP "\fB5\fP"
MD5 sum
.IP "\fBS\fP"
File size
.IP "\fBL\fP"
Symlink
.IP "\fBT\fP"
Mtime
.IP "\fBD\fP"
Device
.IP "\fBU\fP"
User
.IP "\fBG\fP"
Group
.IP "\fBM\fP"
Mode (includes permissions and file type)

.SH SIGNATURE CHECKING
The general form of an rpm signature check command is
.PP
	\fBrpm \-\-checksig <package_file>+\fP
.PP
This checks the PGP signature built into a package to ensure the integrity
and the origin of the package.
PGP configuration information is read from /etc/rpmrc.
See the section on PGP SIGNATURES for details.

.SH UNINSTALL OPTIONS
The general form of an rpm uninstall command is
.PP
	\fB    rpm \-e <package_name>+\fP
.PP
.IP "\fB\-\-allmatches\fP"
Remove all versions of the package which match \fI<package_name>\fR. Normally
an error is issued if \fI<package_name>\fR matches multiple packages.
.IP "\fB\-\-noscripts\fP"
Don't execute the preuninstall or postuninstall scripts.
.IP "\fB\-\-notriggers\fP"
Don't execute scripts which are triggered by the removal of this package.
.IP "\fB\-\-nodeps\fP"
Don't check dependencies before uninstalling the packages.
.IP "\fB\-\-test\fP"
Don't really uninstall anything, just go through the motions.  Useful in
conjunction with the \fB\-vv\fP option.

.SH BUILD OPTIONS
The general form of an rpm build command is
.PP
    \fBrpm \-[b|t]\fIO\fP [build\-options] <package_spec>+\fP
.PP
The argument used is \fB-b\fR if a spec file is being used to build the package
and \fB-t\fR if \fBRPM\fR should look inside of a gzipped (or compressed) tar
file for the spec file to use. After the first argument, the next argument
(\fIO\fR) specifies the stages of building and packaging to be done and
is one of:

.IP "\fB\-bp\fP"
Executes the "%prep" stage from the spec file.  Normally this
involves unpacking the sources and applying any patches.
.IP "\fB\-bl\fP"
Do a "list check".  The "%files" section from the spec file
is macro expanded, and checks are made to insure the files
exist.
.IP "\fB\-bc\fP"
Do the "%build" stage from the spec file (after doing the prep stage).
This generally involves the equivalent of a "make".
.IP "\fB\-bi\fP"
Do the "%install" stage from the spec file (after doing the prep
and build stages).  This generally involves the equivalent of a
"make install".
.IP "\fB\-bb\fP"
Build a binary package (after doing the prep, build, and install stages).
.IP "\fB\-bs\fP"
Build just the source package (after doing the prep, build, and install
stages).
.IP "\fB\-ba\fP"
Build binary and source packages (after doing the prep, build, and 
install stages).
.PP
The following options may also be used:
.IP "\fB\-\-short\-circuit\fP"
Skip straight to specified stage (ie, skip all stages leading up
to the specified stage).  Only valid with \fB\-bc\fP and \fB\-bi\fP.
.IP "\fB\-\-timecheck\fP"
Set the "timecheck" age (0 to disable).  This value can also
be set in rpmrc with "timecheck:".  The timecheck value expresses,
in seconds, the maximum age of a file being packaged.  Warnings
will be printed for all files beyond the timecheck age.
.IP "\fB\-\-clean\fP"
Remove the build tree after the packages are made.
.IP "\fB\-\-rmsource\fP"
Remove the sources and spec file after the build (may also be
used standalone, eg. "\fBrpm \-\-rmsource foo.spec\fP").
.IP "\fB\-\-test\fP"
Do not execute any build stages.
Useful for testing out spec files.
.IP "\fB\-\-sign\fP"
Embed a PGP signature in the package.  This signature can be used
to verify the integrity and the origin of the package.  See the
section on PGP SIGNATURES for /etc/rpmrc details.
.IP "\fB\-\-buildroot \fI<dir>\fP"
When building the package, override the BuildRoot tag with directory
\fI<dir>\fP.
.IP "\fB\-\-buildarch \fI<arch>\fP"
When building the package, set the architecture to \fI<arch>\fP. This will
be obsoleted by \fB\-\-buildarch\fI in later versions of RPM.
.IP "\fB\-\-buildos \fI<os>\fP"
When building the package, set the architecture to \fI<os>\fP. This will
be obsoleted by \fB\-\-buildarch\fI in later versions of RPM.


.SH REBUILD AND RECOMPILE OPTIONS

There are two other ways to invoke building with rpm:

.I "\fBrpm \-\-recompile <source_package_file>+\fP"

.I "\fBrpm \-\-rebuild <source_package_file>+\fP"

When invoked this way, rpm installs the named source package, and does
a prep, compile and install.  In addition, \fB\-\-rebuild\fP builds a new
binary package. When the build has completed, the build directory is
removed (as in \fB\-\-clean\fP) and the the sources and spec file for
the package are removed.

.SH SIGNING AN EXISTING RPM

.I "\fBrpm \-\-resign <binary_package_file>+\fP"

This option generates and inserts new signatures for the listed packages.
Any existing signatures are removed.

.I "\fBrpm \-\-addsign <binary_package_file>+\fP"

This option generates and appends new signatures for the listed packages
to those that already exist.

.SH PGP SIGNATURES

In order to use the signature feature RPM must be able to run PGP
(it must be installed and in your path), and it must be able to
find a public key ring with RPM public keys in it.  By default,
RPM uses the PGP defaults to find the keyrings (honoring PGPPATH).
If your key rings are not located where PGP expects them to be,
you must set the following in your /etc/rpmrc

.IP "\fBpgp_path\fP"
Replacement path for /usr/lib/rpm.  Must contain your key rings.
.PP

If you want to be able to sign packages you create yourself, you also
need to create your own public and secret key pair (see the PGP manual).
In addition to the above /etc/rpmrc entries, you should add the following:

.IP "\fBsignature\fP"
The signature type.  Right now only pgp is supported.
.IP "\fBpgp_name\fP"
The name of the "user" whose key you wish to use to sign your packages.
.PP

When building packages you then add \-\-sign to the command line.
You will be prompted for your pass phrase, and your package will
be built and signed.

.SH REBUILD DATABASE OPTIONS

The general form of an rpm rebuild database command is
.PP
	\fBrpm \-\-rebuilddb\fP
.PP

To rebuild a new database, do:
.PP
	\fBrpm \-\-initdb\fP
.PP

The only options for these modes are \fB-\-dbpath\fP and
\fB-\-root\fP.

.SH SHOWRC 

Running 

.PP
	\fBrpm \-\-showrc\fP

.PP
shows the values RPM will use for all of the options that may be set
in \fIrpmrc\fP files.

.SH FTP OPTIONS

RPM includes a simple FTP client to simplify installing and querying packages 
which are available over the internet. Package files for install, upgrade,
and query operations may be specified as an ftp style URL:

.PP
	\fBftp://<user>:<password>@hostname/path/to/package.rpm\fP
.PP
If the \fB@password\fP portion is omitted, the password will be prompted
for (once per user/hostname pair). If both the user and password are
omitted, anonymous ftp is used. In all cases passive (PASV) ftp transfers are
used.

RPM allows the folowing options to be used with ftp URLs:

.IP "\fB\--ftpproxy <hostname>\fP"
The host <hostname> will be used as a proxy server for all transfers, which
allows users to ftp through firewall machines which use proxy systems.  This
option may also be specified in an \fIrpmrc\fP file.

.IP "\fB\--ftpport <port>\fP"
Specifies the TCP port number to use for the ftp connection instead of
the default port.
This option may also be specified in an \fIrpmrc\fP file.

.SH FILES
.nf
/etc/rpmrc
~/.rpmrc
/var/lib/rpm/packages
/var/lib/rpm/pathidx
/var/lib/rpm/nameidx
/tmp/rpm*
.fi
.El
.SH SEE ALSO
.IR glint (8) ,
.IR rpm2cpio (8) ,
.B http://www.rpm.org/
.nf
.SH AUTHORS
.nf
Marc Ewing <marc@redhat.com>
Jeff Johnson <jbj@redhat.com>
Erik Troan <ewt@redhat.com>
.fi