6.3 KiB
Hosting UI and Models separately
Sometimes, its beneficial to host Ollama, separate from the UI, but retain the RAG and RBAC support features shared across users:
Open WebUI Configuration
UI Configuration
For the UI configuration, you can set up the Apache VirtualHost as follows:
# Assuming you have a website hosting this UI at "server.com"
<VirtualHost 192.168.1.100:80>
ServerName server.com
DocumentRoot /home/server/public_html
ProxyPass / http://server.com:3000/ nocanon
ProxyPassReverse / http://server.com:3000/
</VirtualHost>
Enable the site first before you can request SSL:
a2ensite server.com.conf # this will enable the site. a2ensite is short for "Apache 2 Enable Site"
# For SSL
<VirtualHost 192.168.1.100:443>
ServerName server.com
DocumentRoot /home/server/public_html
ProxyPass / http://server.com:3000/ nocanon
ProxyPassReverse / http://server.com:3000/
SSLEngine on
SSLCertificateFile /etc/ssl/virtualmin/170514456861234/ssl.cert
SSLCertificateKeyFile /etc/ssl/virtualmin/170514456861234/ssl.key
SSLProtocol all -SSLv2 -SSLv3 -TLSv1 -TLSv1.1
SSLProxyEngine on
SSLCACertificateFile /etc/ssl/virtualmin/170514456865864/ssl.ca
</VirtualHost>
I'm using virtualmin here for my SSL clusters, but you can also use certbot directly or your preferred SSL method. To use SSL:
Prerequisites.
Run the following commands:
snap install certbot --classic
snap apt install python3-certbot-apache (this will install the apache plugin).
Navigate to the apache sites-available directory:
cd /etc/apache2/sites-available/
Create server.com.conf if it is not yet already created, containing the above <virtualhost> configuration (it should match your case. Modify as necessary). Use the one without the SSL:
Once it's created, run certbot --apache -d server.com, this will request and add/create an SSL keys for you as well as create the server.com.le-ssl.conf
Configuring Ollama Server
On your latest installation of Ollama, make sure that you have setup your api server from the official Ollama reference:
TL;DR
The guide doesn't seem to match the current updated service file on linux. So, we will address it here:
Unless when you're compiling Ollama from source, installing with the standard install curl https://ollama.com/install.sh | sh creates a file called ollama.service in /etc/systemd/system. You can use nano to edit the file:
sudo nano /etc/systemd/system/ollama.service
Add the following lines:
Environment="OLLAMA_HOST=0.0.0.0:11434" # this line is mandatory. You can also specify
For instance:
[Unit]
Description=Ollama Service
After=network-online.target
[Service]
ExecStart=/usr/local/bin/ollama serve
Environment="OLLAMA_HOST=0.0.0.0:11434" # this line is mandatory. You can also specify 192.168.254.109:DIFFERENT_PORT, format
Environment="OLLAMA_ORIGINS=http://192.168.254.106:11434,https://models.server.city" # this line is optional
User=ollama
Group=ollama
Restart=always
RestartSec=3
Environment="PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/s>
[Install]
WantedBy=default.target
Save the file by pressing CTRL+S, then press CTRL+X
When your computer restarts, the Ollama server will now be listening on the IP:PORT you specified, in this case 0.0.0.0:11434, or 192.168.254.106:11434 (whatever your local IP address is). Make sure that your router is correctly configured to serve pages from that local IP by forwarding 11434 to your local IP server.
Ollama Model Configuration
For the Ollama model configuration, use the following Apache VirtualHost setup:
Navigate to the apache sites-available directory:
cd /etc/apache2/sites-available/
nano models.server.city.conf # match this with your ollama server domain
Add the folloing virtualhost containing this example (modify as needed):
# Assuming you have a website hosting this UI at "models.server.city"
<IfModule mod_ssl.c>
<VirtualHost 192.168.254.109:443>
DocumentRoot "/var/www/html/"
ServerName models.server.city
<Directory "/var/www/html/">
Options None
Require all granted
</Directory>
ProxyRequests Off
ProxyPreserveHost On
ProxyAddHeaders On
SSLProxyEngine on
ProxyPass / http://server.city:1000/ nocanon # or port 11434
ProxyPassReverse / http://server.city:1000/ # or port 11434
SSLCertificateFile /etc/letsencrypt/live/models.server.city/fullchain.pem
SSLCertificateKeyFile /etc/letsencrypt/live/models.server.city/privkey.pem
Include /etc/letsencrypt/options-ssl-apache.conf
</VirtualHost>
</IfModule>
You may need to enable the site first (if you haven't done so yet) before you can request SSL:
a2ensite models.server.city.conf
For the SSL part of Ollama server
Run the following commands:
Navigate to the apache sites-available directory:
cd /etc/apache2/sites-available/
certbot --apache -d server.com
<VirtualHost 192.168.254.109:80>
DocumentRoot "/var/www/html/"
ServerName models.server.city
<Directory "/var/www/html/">
Options None
Require all granted
</Directory>
ProxyRequests Off
ProxyPreserveHost On
ProxyAddHeaders On
SSLProxyEngine on
ProxyPass / http://server.city:1000/ nocanon # or port 11434
ProxyPassReverse / http://server.city:1000/ # or port 11434
RewriteEngine on
RewriteCond %{SERVER_NAME} =models.server.city
RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,NE,R=permanent]
</VirtualHost>
Don't forget to restart/reload Apache with systemctl reload apache2
Open your site at https://server.com!
Congratulations, your Open-AI-like Chat-GPT style UI is now serving AI with RAG, RBAC and multimodal features! Download Ollama models if you haven't yet done so!
If you encounter any misconfiguration or errors, please file an issue or engage with our discussion. There are a lot of friendly developers here to assist you.
Let's make this UI much more user friendly for everyone!
Thanks for making open-webui your UI Choice for AI!
This doc is made by Bob Reyes, your Open-WebUI fan from the Philippines.