dnrops
/
gimp
mirror of https://github.com/GNOME/gimp.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
gimp/plug-ins/common/jpeg.c

1179 lines
36 KiB
C
Raw Blame History

/* The GIMP -- an image manipulation program
* Copyright (C) 1995 Spencer Kimball and Peter Mattis
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/* JPEG loading and saving file filter for the GIMP
* -Peter Mattis
*
* This filter is heavily based upon the "example.c" file in libjpeg.
* In fact most of the loading and saving code was simply cut-and-pasted
* from that file. The filter, therefore, also uses libjpeg.
*/
/* 11-JAN-99 - Added support for JPEG comments and Progressive saves.
* -pete whiting <pwhiting@sprint.net>
*
* Comments of size up to 32k can be stored in the header of jpeg
* files. (They are not compressed.) The JPEG specs and libraries
* support the storing of multiple comments. The behavior of this
* code is to merge all comments in a loading image into a single
* comment (putting \n between each) and attach that string as a
* parasite - gimp-comment - to the image. When saving, the image is
* checked to see if it has the gimp-comment parasite - if so, that is
* used as the default comment in the save dialog. Further, the other
* jpeg parameters (quaility, smoothing, compression and progressive)
* are attached to the image as a parasite. This allows the
* parameters to remain consistent between saves. I was not able to
* figure out how to determine the quaility, smoothing or compression
* values of an image as it is being loaded, but the code is there to
* support it if anyone knows how. Progressive mode is a method of
* saving the image such that as a browser (or other app supporting
* progressive loads - gimp doesn't) loads the image it first gets a
* low res version displayed and then the image is progressively
* enhanced until you get the final version. It doesn't add any size
* to the image (actually it often results in smaller file size) - the
* only draw backs are that progressive jpegs are not supported by some
* older viewers/browsers, and some might find it annoying.
*/
#include <setjmp.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <jpeglib.h>
#include <jerror.h>
#include "config.h" /* configure cares about HAVE_PROGRESSIVE_JPEG */
#include "gtk/gtk.h"
#include "libgimp/gimp.h"
#include "libgimp/stdplugins-intl.h"
#define SCALE_WIDTH 125
/* if you are not compiling this from inside the gimp tree, you have to */
/* take care yourself if your JPEG library supports progressive mode */
/* #undef HAVE_PROGRESSIVE_JPEG if your library don't support it */
/* #define HAVE_PROGRESSIVE_JPEG if your library knows how to handle it */
#define DEFAULT_QUALITY 0.75
#define DEFAULT_SMOOTHING 0.0
#define DEFAULT_OPTIMIZE 1
#define DEFAULT_PROGRESSIVE 0
#define DEFAULT_COMMENT "Created with The GIMP"
typedef struct
{
gdouble quality;
gdouble smoothing;
gint optimize;
gint progressive;
} JpegSaveVals;
typedef struct
{
gint run;
} JpegSaveInterface;
/* Declare local functions.
*/
static void query (void);
static void run (char *name,
int nparams,
GParam *param,
int *nreturn_vals,
GParam **return_vals);
static gint32 load_image (char *filename, GRunModeType runmode);
static gint save_image (char *filename,
gint32 image_ID,
gint32 drawable_ID);
static gint save_dialog ();
static void save_close_callback (GtkWidget *widget,
gpointer data);
static void save_ok_callback (GtkWidget *widget,
gpointer data);
static void save_scale_update (GtkAdjustment *adjustment,
double *scale_val);
static void save_optimize_update (GtkWidget *widget,
gpointer data);
static void save_progressive_toggle (GtkWidget *widget,
gpointer data);
GPlugInInfo PLUG_IN_INFO =
{
NULL, /* init_proc */
NULL, /* quit_proc */
query, /* query_proc */
run, /* run_proc */
};
static JpegSaveVals jsvals =
{
DEFAULT_QUALITY,
DEFAULT_SMOOTHING,
DEFAULT_OPTIMIZE,
DEFAULT_PROGRESSIVE
};
static JpegSaveInterface jsint =
{
FALSE /* run */
};
char *image_comment=NULL;
MAIN ()
static void
query ()
{
static GParamDef load_args[] =
{
{ PARAM_INT32, "run_mode", "Interactive, non-interactive" },
{ PARAM_STRING, "filename", "The name of the file to load" },
{ PARAM_STRING, "raw_filename", "The name of the file to load" },
};
static GParamDef load_return_vals[] =
{
{ PARAM_IMAGE, "image", "Output image" },
};
static int nload_args = sizeof (load_args) / sizeof (load_args[0]);
static int nload_return_vals = sizeof (load_return_vals) / sizeof (load_return_vals[0]);
static GParamDef save_args[] =
{
{ PARAM_INT32, "run_mode", "Interactive, non-interactive" },
{ PARAM_IMAGE, "image", "Input image" },
{ PARAM_DRAWABLE, "drawable", "Drawable to save" },
{ PARAM_STRING, "filename", "The name of the file to save the image in" },
{ PARAM_STRING, "raw_filename", "The name of the file to save the image in" },
{ PARAM_FLOAT, "quality", "Quality of saved image (0 <= quality <= 1)" },
{ PARAM_FLOAT, "smoothing", "Smoothing factor for saved image (0 <= smoothing <= 1)" },
{ PARAM_INT32, "optimize", "Optimization of entropy encoding parameters" },
{ PARAM_INT32, "progressive", "Enable progressive jpeg image loading - ignored if not compiled with HAVE_PROGRESSIVE_JPEG" },
{ PARAM_STRING, "comment", "Image comment" }
};
static int nsave_args = sizeof (save_args) / sizeof (save_args[0]);
INIT_I18N();
gimp_install_procedure ("file_jpeg_load",
_("loads files of the jpeg file format"),
"FIXME: write help for jpeg_load",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
"<Load>/Jpeg",
NULL,
PROC_PLUG_IN,
nload_args, nload_return_vals,
load_args, load_return_vals);
gimp_install_procedure ("file_jpeg_save",
"saves files in the jpeg file format",
"FIXME: write help for jpeg_save",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
"<Save>/Jpeg",
"RGB*, GRAY*",
PROC_PLUG_IN,
nsave_args, 0,
save_args, NULL);
gimp_register_magic_load_handler ("file_jpeg_load", "jpg,jpeg", "", "6,string,JFIF");
gimp_register_save_handler ("file_jpeg_save", "jpg,jpeg", "");
}
static void
run (char *name,
int nparams,
GParam *param,
int *nreturn_vals,
GParam **return_vals)
{
static GParam values[2];
GRunModeType run_mode;
GStatusType status = STATUS_SUCCESS;
gint32 image_ID;
#ifdef GIMP_HAVE_PARASITES
Parasite *parasite;
#endif /* GIMP_HAVE_PARASITES */
run_mode = param[0].data.d_int32;
*nreturn_vals = 1;
*return_vals = values;
values[0].type = PARAM_STATUS;
values[0].data.d_status = STATUS_CALLING_ERROR;
if (strcmp (name, "file_jpeg_load") == 0)
{
INIT_I18N();
image_ID = load_image (param[1].data.d_string, run_mode);
if (image_ID != -1)
{
*nreturn_vals = 2;
values[0].data.d_status = STATUS_SUCCESS;
values[1].type = PARAM_IMAGE;
values[1].data.d_image = image_ID;
}
else
{
values[0].data.d_status = STATUS_EXECUTION_ERROR;
}
}
else if (strcmp (name, "file_jpeg_save") == 0)
{
INIT_I18N();
image_ID = param[1].data.d_int32;
if(image_comment) {
g_free(image_comment);
image_comment=NULL;
}
#ifdef GIMP_HAVE_PARASITES
parasite = gimp_image_find_parasite(image_ID, "gimp-comment");
if (parasite) {
image_comment = g_strdup(parasite->data);
parasite_free(parasite);
}
#endif /* GIMP_HAVE_PARASITES */
if (!image_comment) image_comment = g_strdup(DEFAULT_COMMENT);
jsvals.quality = DEFAULT_QUALITY;
jsvals.smoothing = DEFAULT_SMOOTHING;
jsvals.optimize = DEFAULT_OPTIMIZE;
jsvals.progressive = DEFAULT_PROGRESSIVE;
switch (run_mode)
{
case RUN_INTERACTIVE:
/* Possibly retrieve data */
gimp_get_data ("file_jpeg_save", &jsvals);
#ifdef GIMP_HAVE_PARASITES
/* load up the previously used values */
parasite = gimp_image_find_parasite(image_ID, "jpeg-save-options");
if (parasite)
{
jsvals.quality = ((JpegSaveVals *)parasite->data)->quality;
jsvals.smoothing = ((JpegSaveVals *)parasite->data)->smoothing;
jsvals.optimize = ((JpegSaveVals *)parasite->data)->optimize;
jsvals.progressive = ((JpegSaveVals *)parasite->data)->progressive;
parasite_free(parasite);
}
#endif /* GIMP_HAVE_PARASITES */
/* First acquire information with a dialog */
if (! save_dialog ())
return;
break;
case RUN_NONINTERACTIVE:
/* Make sure all the arguments are there! */
/* pw - added two more progressive and comment */
if (nparams != 10)
status = STATUS_CALLING_ERROR;
if (status == STATUS_SUCCESS)
{
jsvals.quality = param[5].data.d_float;
jsvals.smoothing = param[6].data.d_float;
jsvals.optimize = param[7].data.d_int32;
#ifdef HAVE_PROGRESSIVE_JPEG
jsvals.progressive = param[8].data.d_int32;
#endif /* HAVE_PROGRESSIVE_JPEG */
/* free up the default -- wasted some effort earlier */
if(image_comment) g_free(image_comment);
image_comment=g_strdup(param[9].data.d_string);
}
if (status == STATUS_SUCCESS &&
(jsvals.quality < 0.0 || jsvals.quality > 1.0))
status = STATUS_CALLING_ERROR;
if (status == STATUS_SUCCESS &&
(jsvals.smoothing < 0.0 || jsvals.smoothing > 1.0))
status = STATUS_CALLING_ERROR;
break;
case RUN_WITH_LAST_VALS:
/* Possibly retrieve data */
gimp_get_data ("file_jpeg_save", &jsvals);
#ifdef GIMP_HAVE_PARASITES
parasite = gimp_image_find_parasite(image_ID, "jpeg-save-options");
if (parasite)
{
jsvals.quality = ((JpegSaveVals *)parasite->data)->quality;
jsvals.smoothing = ((JpegSaveVals *)parasite->data)->smoothing;
jsvals.optimize = ((JpegSaveVals *)parasite->data)->optimize;
jsvals.progressive = ((JpegSaveVals *)parasite->data)->progressive;
parasite_free(parasite);
}
#endif /* GIMP_HAVE_PARASITES */
break;
default:
break;
}
*nreturn_vals = 1;
if (save_image (param[3].data.d_string,
param[1].data.d_int32,
param[2].data.d_int32))
{
/* Store mvals data */
gimp_set_data ("file_jpeg_save", &jsvals, sizeof (JpegSaveVals));
values[0].data.d_status = STATUS_SUCCESS;
}
else
values[0].data.d_status = STATUS_EXECUTION_ERROR;
#ifdef GIMP_HAVE_PARASITES
/* pw - now we need to change the defaults to be whatever
* was used to save this image. Dump the old parasites
* and add new ones. */
gimp_image_detach_parasite(image_ID,"gimp-comment");
if(strlen(image_comment)) {
parasite=parasite_new("gimp-comment",
PARASITE_PERSISTENT,
strlen(image_comment)+1,
image_comment);
gimp_image_attach_parasite(image_ID,parasite);
parasite_free(parasite);
}
gimp_image_detach_parasite(image_ID, "jpeg-save-options");
parasite=parasite_new("jpeg-save-options",0,sizeof(jsvals),&jsvals);
gimp_image_attach_parasite(image_ID,parasite);
parasite_free(parasite);
#endif /* Have Parasites */
}
}
/* Read next byte */
static unsigned int
jpeg_getc (j_decompress_ptr cinfo)
{
struct jpeg_source_mgr * datasrc = cinfo->src;
if (datasrc->bytes_in_buffer == 0) {
if (! (*datasrc->fill_input_buffer) (cinfo))
ERREXIT(cinfo, JERR_CANT_SUSPEND);
}
datasrc->bytes_in_buffer--;
return *datasrc->next_input_byte++;
}
/* We need our own marker parser, since early versions of libjpeg
* don't keep a conventient list of the marker's that have been
* seen. */
/*
* Marker processor for COM markers.
* This replaces the library's built-in processor, which just skips the marker.
* Note this code relies on a non-suspending data source.
*/
static GString *local_image_comments=NULL;
static boolean
COM_handler (j_decompress_ptr cinfo)
{
int length;
unsigned int ch;
length = jpeg_getc (cinfo) << 8;
length += jpeg_getc (cinfo);
if (length < 2)
return FALSE;
length -= 2; /* discount the length word itself */
if (!local_image_comments)
local_image_comments = g_string_new (NULL);
else
g_string_append_c (local_image_comments, '\n');
while (length-- > 0)
{
ch = jpeg_getc (cinfo);
g_string_append_c (local_image_comments, ch);
}
return TRUE;
}
typedef struct my_error_mgr {
struct jpeg_error_mgr pub; /* "public" fields */
jmp_buf setjmp_buffer; /* for return to caller */
} *my_error_ptr;
/*
* Here's the routine that will replace the standard error_exit method:
*/
static void
my_error_exit (j_common_ptr cinfo)
{
/* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
my_error_ptr myerr = (my_error_ptr) cinfo->err;
/* Always display the message. */
/* We could postpone this until after returning, if we chose. */
(*cinfo->err->output_message) (cinfo);
/* Return control to the setjmp point */
longjmp (myerr->setjmp_buffer, 1);
}
static gint32
load_image (char *filename, GRunModeType runmode)
{
GPixelRgn pixel_rgn;
GDrawable *drawable;
gint32 volatile image_ID;
gint32 layer_ID;
struct jpeg_decompress_struct cinfo;
struct my_error_mgr jerr;
FILE *infile;
guchar *buf;
guchar **rowbuf;
char *name;
int image_type;
int layer_type;
int tile_height;
int scanlines;
int i, start, end;
#ifdef GIMP_HAVE_PARASITES
JpegSaveVals local_save_vals;
Parasite *comment_parasite;
Parasite *vals_parasite;
#endif /* GIMP_HAVE_PARASITES */
/* We set up the normal JPEG error routines. */
cinfo.err = jpeg_std_error (&jerr.pub);
jerr.pub.error_exit = my_error_exit;
if ((infile = fopen (filename, "rb")) == NULL)
{
g_warning (_("can't open \"%s\"\n"), filename);
gimp_quit ();
}
if (runmode != RUN_NONINTERACTIVE)
{
name = malloc (strlen (filename) + 12);
sprintf (name, _("Loading %s:"), filename);
gimp_progress_init (name);
free (name);
}
image_ID = -1;
/* Establish the setjmp return context for my_error_exit to use. */
if (setjmp (jerr.setjmp_buffer))
{
/* If we get here, the JPEG code has signaled an error.
* We need to clean up the JPEG object, close the input file, and return.
*/
jpeg_destroy_decompress (&cinfo);
if (infile)
fclose (infile);
if (image_ID != -1)
gimp_image_delete (image_ID);
gimp_quit ();
}
/* Now we can initialize the JPEG decompression object. */
jpeg_create_decompress (&cinfo);
/* Step 2: specify data source (eg, a file) */
jpeg_stdio_src (&cinfo, infile);
/* pw - step 2.1 let the lib know we want the comments. */
jpeg_set_marker_processor (&cinfo, JPEG_COM, COM_handler);
/* Step 3: read file parameters with jpeg_read_header() */
(void) jpeg_read_header (&cinfo, TRUE);
/* We can ignore the return value from jpeg_read_header since
* (a) suspension is not possible with the stdio data source, and
* (b) we passed TRUE to reject a tables-only JPEG file as an error.
* See libjpeg.doc for more info.
*/
#ifdef GIMP_HAVE_PARASITES
/* if we had any comments then make a parasite for them */
if(local_image_comments) {
char *string=local_image_comments->str;
g_string_free(local_image_comments,FALSE);
comment_parasite = parasite_new("gimp-comment", PARASITE_PERSISTENT,
strlen(string)+1,string);
} else {
comment_parasite=NULL;
}
/* pw - figuring out what the saved values were is non-trivial.
* They don't seem to be in the cinfo structure. For now, I will
* just use the defaults, but if someone figures out how to derive
* them this is the place to store them. */
local_save_vals.quality=DEFAULT_QUALITY;
local_save_vals.smoothing=DEFAULT_SMOOTHING;
local_save_vals.optimize=DEFAULT_OPTIMIZE;
#ifdef HAVE_PROGRESSIVE_JPEG
local_save_vals.progressive=cinfo.progressive_mode;
#else
local_save_vals.progressive=0;
#endif /* HAVE_PROGRESSIVE_JPEG */
vals_parasite = parasite_new("jpeg-save-options", 0,
sizeof(local_save_vals), &local_save_vals);
#endif /* GIMP_HAVE_PARASITES */
/* Step 4: set parameters for decompression */
/* In this example, we don't need to change any of the defaults set by
* jpeg_read_header(), so we do nothing here.
*/
/* Step 5: Start decompressor */
jpeg_start_decompress (&cinfo);
/* We may need to do some setup of our own at this point before reading
* the data. After jpeg_start_decompress() we have the correct scaled
* output image dimensions available, as well as the output colormap
* if we asked for color quantization.
* In this example, we need to make an output work buffer of the right size.
*/
/* temporary buffer */
tile_height = gimp_tile_height ();
buf = g_new (guchar, tile_height * cinfo.output_width * cinfo.output_components);
rowbuf = g_new (guchar*, tile_height);
for (i = 0; i < tile_height; i++)
rowbuf[i] = buf + cinfo.output_width * cinfo.output_components * i;
/* Create a new image of the proper size and associate the filename with it.
*/
switch (cinfo.output_components)
{
case 1:
image_type = GRAY;
layer_type = GRAY_IMAGE;
break;
case 3:
image_type = RGB;
layer_type = RGB_IMAGE;
break;
default:
g_message (_("don't know how to load JPEGs\nwith %d color channels"),
cinfo.output_components);
gimp_quit ();
}
image_ID = gimp_image_new (cinfo.output_width, cinfo.output_height, image_type);
gimp_image_set_filename (image_ID, filename);
layer_ID = gimp_layer_new (image_ID, _("Background"),
cinfo.output_width,
cinfo.output_height,
layer_type, 100, NORMAL_MODE);
gimp_image_add_layer (image_ID, layer_ID, 0);
drawable = gimp_drawable_get (layer_ID);
gimp_pixel_rgn_init (&pixel_rgn, drawable, 0, 0, drawable->width, drawable->height, TRUE, FALSE);
/* Step 5.1: if the file had resolution information, set it on the
* image */
#ifdef GIMP_HAVE_RESOLUTION_INFO
if (cinfo.saw_JFIF_marker)
{
float xresolution;
float yresolution;
float asymmetry;
xresolution = cinfo.X_density;
yresolution = cinfo.Y_density;
switch (cinfo.density_unit) {
case 0: /* unknown */
asymmetry = xresolution / yresolution;
xresolution = 72 * asymmetry;
yresolution = 72;
break;
case 1: /* dots per inch */
break;
case 2: /* dots per cm */
xresolution *= 2.54;
yresolution *= 2.54;
break;
default:
g_message (_("unknown density unit %d\nassuming dots per inch"),
cinfo.density_unit);
break;
}
if (xresolution > 1e-5 && yresolution > 1e-5)
gimp_image_set_resolution (image_ID, xresolution, yresolution);
}
#endif /* GIMP_HAVE_RESOLUTION_INFO */
/* Step 6: while (scan lines remain to be read) */
/* jpeg_read_scanlines(...); */
/* Here we use the library's state variable cinfo.output_scanline as the
* loop counter, so that we don't have to keep track ourselves.
*/
while (cinfo.output_scanline < cinfo.output_height)
{
start = cinfo.output_scanline;
end = cinfo.output_scanline + tile_height;
end = MIN (end, cinfo.output_height);
scanlines = end - start;
for (i = 0; i < scanlines; i++)
jpeg_read_scanlines (&cinfo, (JSAMPARRAY) &rowbuf[i], 1);
/*
for (i = start; i < end; i++)
gimp_pixel_rgn_set_row (&pixel_rgn, tilerow[i - start], 0, i, drawable->width);
*/
gimp_pixel_rgn_set_rect (&pixel_rgn, buf, 0, start, drawable->width, scanlines);
if (runmode != RUN_NONINTERACTIVE)
{
gimp_progress_update ((double) cinfo.output_scanline / (double) cinfo.output_height);
}
}
/* Step 7: Finish decompression */
jpeg_finish_decompress (&cinfo);
/* We can ignore the return value since suspension is not possible
* with the stdio data source.
*/
/* Step 8: Release JPEG decompression object */
/* This is an important step since it will release a good deal of memory. */
jpeg_destroy_decompress (&cinfo);
/* free up the temporary buffers */
g_free (rowbuf);
g_free (buf);
/* After finish_decompress, we can close the input file.
* Here we postpone it until after no more JPEG errors are possible,
* so as to simplify the setjmp error logic above. (Actually, I don't
* think that jpeg_destroy can do an error exit, but why assume anything...)
*/
fclose (infile);
/* At this point you may want to check to see whether any corrupt-data
* warnings occurred (test whether jerr.num_warnings is nonzero).
*/
/* Tell the GIMP to display the image.
*/
gimp_drawable_flush (drawable);
/* pw - Last of all, attach the parasites (couldn't do it earlier -
there was no image. */
if(comment_parasite){
gimp_image_attach_parasite(image_ID, comment_parasite);
parasite_free(comment_parasite);
}
if(vals_parasite){
gimp_image_attach_parasite(image_ID, vals_parasite);
parasite_free(vals_parasite);
}
return image_ID;
}
static gint
save_image (char *filename,
gint32 image_ID,
gint32 drawable_ID)
{
GPixelRgn pixel_rgn;
GDrawable *drawable;
GDrawableType drawable_type;
struct jpeg_compress_struct cinfo;
struct my_error_mgr jerr;
FILE * volatile outfile;
guchar *temp, *t;
guchar *data;
guchar *src, *s;
char *name;
int has_alpha;
int rowstride, yend;
int i, j;
drawable = gimp_drawable_get (drawable_ID);
drawable_type = gimp_drawable_type (drawable_ID);
gimp_pixel_rgn_init (&pixel_rgn, drawable, 0, 0, drawable->width, drawable->height, FALSE, FALSE);
name = malloc (strlen (filename) + 11);
sprintf (name, _("Saving %s:"), filename);
gimp_progress_init (name);
free (name);
/* Step 1: allocate and initialize JPEG compression object */
/* We have to set up the error handler first, in case the initialization
* step fails. (Unlikely, but it could happen if you are out of memory.)
* This routine fills in the contents of struct jerr, and returns jerr's
* address which we place into the link field in cinfo.
*/
cinfo.err = jpeg_std_error (&jerr.pub);
jerr.pub.error_exit = my_error_exit;
outfile = NULL;
/* Establish the setjmp return context for my_error_exit to use. */
if (setjmp (jerr.setjmp_buffer))
{
/* If we get here, the JPEG code has signaled an error.
* We need to clean up the JPEG object, close the input file, and return.
*/
jpeg_destroy_compress (&cinfo);
if (outfile)
fclose (outfile);
if (drawable)
gimp_drawable_detach (drawable);
return FALSE;
}
/* Now we can initialize the JPEG compression object. */
jpeg_create_compress (&cinfo);
/* Step 2: specify data destination (eg, a file) */
/* Note: steps 2 and 3 can be done in either order. */
/* Here we use the library-supplied code to send compressed data to a
* stdio stream. You can also write your own code to do something else.
* VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
* requires it in order to write binary files.
*/
if ((outfile = fopen (filename, "wb")) == NULL)
{
g_message ("can't open %s\n", filename);
return FALSE;
}
jpeg_stdio_dest (&cinfo, outfile);
/* Get the input image and a pointer to its data.
*/
switch (drawable_type)
{
case RGB_IMAGE:
case GRAY_IMAGE:
/* # of color components per pixel */
cinfo.input_components = drawable->bpp;
has_alpha = 0;
break;
case RGBA_IMAGE:
case GRAYA_IMAGE:
/*gimp_message ("jpeg: image contains a-channel info which will be lost");*/
/* # of color components per pixel (minus the GIMP alpha channel) */
cinfo.input_components = drawable->bpp - 1;
has_alpha = 1;
break;
case INDEXED_IMAGE:
/*gimp_message ("jpeg: cannot operate on indexed color images");*/
return FALSE;
break;
default:
/*gimp_message ("jpeg: cannot operate on unknown image types");*/
return FALSE;
break;
}
/* Step 3: set parameters for compression */
/* First we supply a description of the input image.
* Four fields of the cinfo struct must be filled in:
*/
/* image width and height, in pixels */
cinfo.image_width = drawable->width;
cinfo.image_height = drawable->height;
/* colorspace of input image */
cinfo.in_color_space = (drawable_type == RGB_IMAGE ||
drawable_type == RGBA_IMAGE)
? JCS_RGB : JCS_GRAYSCALE;
/* Now use the library's routine to set default compression parameters.
* (You must set at least cinfo.in_color_space before calling this,
* since the defaults depend on the source color space.)
*/
jpeg_set_defaults (&cinfo);
/* Now you can set any non-default parameters you wish to.
* Here we just illustrate the use of quality (quantization table) scaling:
*/
jpeg_set_quality (&cinfo, (int) (jsvals.quality * 100), TRUE /* limit to baseline-JPEG values */);
cinfo.smoothing_factor = (int) (jsvals.smoothing * 100);
cinfo.optimize_coding = jsvals.optimize;
#ifdef HAVE_PROGRESSIVE_JPEG
if(jsvals.progressive) {
jpeg_simple_progression(&cinfo);
}
#endif /* HAVE_PROGRESSIVE_JPEG */
#ifdef GIMP_HAVE_RESOLUTION_INFO
{
double xresolution;
double yresolution;
gimp_image_get_resolution (image_ID, &xresolution, &yresolution);
if (xresolution > 1e-5 && yresolution > 1e-5)
{
cinfo.density_unit = 1; /* dots per inch */
cinfo.X_density = xresolution;
cinfo.Y_density = yresolution;
}
}
#endif /* GIMP_HAVE_RESOLUTION_INFO */
/* Step 4: Start compressor */
/* TRUE ensures that we will write a complete interchange-JPEG file.
* Pass TRUE unless you are very sure of what you're doing.
*/
jpeg_start_compress (&cinfo, TRUE);
/* Step 4.1: Write the comment out - pw */
if(image_comment) {
jpeg_write_marker(&cinfo,
JPEG_COM,
image_comment,
strlen(image_comment));
}
/* Step 5: while (scan lines remain to be written) */
/* jpeg_write_scanlines(...); */
/* Here we use the library's state variable cinfo.next_scanline as the
* loop counter, so that we don't have to keep track ourselves.
* To keep things simple, we pass one scanline per call; you can pass
* more if you wish, though.
*/
/* JSAMPLEs per row in image_buffer */
rowstride = drawable->bpp * drawable->width;
temp = (guchar *) malloc (cinfo.image_width * cinfo.input_components);
data = (guchar *) malloc (rowstride * gimp_tile_height ());
/* fault if cinfo.next_scanline isn't initially a multiple of
* gimp_tile_height */
src = NULL;
while (cinfo.next_scanline < cinfo.image_height)
{
if ((cinfo.next_scanline % gimp_tile_height ()) == 0)
{
yend = cinfo.next_scanline + gimp_tile_height ();
yend = MIN (yend, cinfo.image_height);
gimp_pixel_rgn_get_rect (&pixel_rgn, data, 0, cinfo.next_scanline, cinfo.image_width,
(yend - cinfo.next_scanline));
src = data;
}
t = temp;
s = src;
i = cinfo.image_width;
while (i--)
{
for (j = 0; j < cinfo.input_components; j++)
*t++ = *s++;
if (has_alpha) /* ignore alpha channel */
s++;
}
src += rowstride;
jpeg_write_scanlines (&cinfo, (JSAMPARRAY) &temp, 1);
if ((cinfo.next_scanline % 5) == 0)
gimp_progress_update ((double) cinfo.next_scanline / (double) cinfo.image_height);
}
/* Step 6: Finish compression */
jpeg_finish_compress (&cinfo);
/* After finish_compress, we can close the output file. */
fclose (outfile);
/* Step 7: release JPEG compression object */
/* This is an important step since it will release a good deal of memory. */
jpeg_destroy_compress (&cinfo);
/* free the temporary buffer */
free (temp);
free (data);
/* And we're done! */
/*gimp_do_progress (1, 1);*/
gimp_drawable_detach (drawable);
return TRUE;
}
static gint
save_dialog ()
{
GtkWidget *dlg;
GtkWidget *label;
GtkWidget *button;
GtkWidget *scale;
GtkWidget *frame;
GtkWidget *table;
GtkWidget *toggle;
GtkObject *scale_data;
GtkWidget *progressive;
GtkWidget *text;
GtkWidget *com_frame;
GtkWidget *com_table;
GtkWidget *vscrollbar;
gchar **argv;
gint argc;
argc = 1;
argv = g_new (gchar *, 1);
argv[0] = g_strdup ("save");
gtk_init (&argc, &argv);
gtk_rc_parse (gimp_gtkrc ());
dlg = gtk_dialog_new ();
gtk_window_set_title (GTK_WINDOW (dlg), _("Save as Jpeg"));
gtk_window_position (GTK_WINDOW (dlg), GTK_WIN_POS_MOUSE);
gtk_signal_connect (GTK_OBJECT (dlg), "destroy",
(GtkSignalFunc) save_close_callback,
NULL);
/* Action area */
button = gtk_button_new_with_label (_("OK"));
GTK_WIDGET_SET_FLAGS (button, GTK_CAN_DEFAULT);
gtk_signal_connect (GTK_OBJECT (button), "clicked",
(GtkSignalFunc) save_ok_callback,
dlg);
gtk_box_pack_start (GTK_BOX (GTK_DIALOG (dlg)->action_area), button, TRUE, TRUE, 0);
gtk_widget_grab_default (button);
gtk_widget_show (button);
button = gtk_button_new_with_label (_("Cancel"));
GTK_WIDGET_SET_FLAGS (button, GTK_CAN_DEFAULT);
gtk_signal_connect_object (GTK_OBJECT (button), "clicked",
(GtkSignalFunc) gtk_widget_destroy,
GTK_OBJECT (dlg));
gtk_box_pack_start (GTK_BOX (GTK_DIALOG (dlg)->action_area), button, TRUE, TRUE, 0);
gtk_widget_show (button);
/* parameter settings */
frame = gtk_frame_new (_("Parameter Settings"));
gtk_frame_set_shadow_type (GTK_FRAME (frame), GTK_SHADOW_ETCHED_IN);
gtk_container_border_width (GTK_CONTAINER (frame), 10);
gtk_box_pack_start (GTK_BOX (GTK_DIALOG (dlg)->vbox), frame, TRUE, TRUE, 0);
table = gtk_table_new (4, 2, FALSE);
gtk_container_border_width (GTK_CONTAINER (table), 10);
gtk_container_add (GTK_CONTAINER (frame), table);
label = gtk_label_new (_("Quality"));
gtk_misc_set_alignment (GTK_MISC (label), 0.0, 0.5);
gtk_table_attach (GTK_TABLE (table), label, 0, 1, 0, 1, GTK_FILL | GTK_EXPAND, GTK_FILL, 5, 0);
scale_data = gtk_adjustment_new (jsvals.quality, 0.0, 1.0, 0.01, 0.01, 0.0);
scale = gtk_hscale_new (GTK_ADJUSTMENT (scale_data));
gtk_widget_set_usize (scale, SCALE_WIDTH, 0);
gtk_table_attach (GTK_TABLE (table), scale, 1, 2, 0, 1, GTK_FILL | GTK_EXPAND, GTK_FILL, 0, 0);
gtk_scale_set_value_pos (GTK_SCALE (scale), GTK_POS_TOP);
gtk_scale_set_digits (GTK_SCALE (scale), 2);
gtk_range_set_update_policy (GTK_RANGE (scale), GTK_UPDATE_DELAYED);
gtk_signal_connect (GTK_OBJECT (scale_data), "value_changed",
(GtkSignalFunc) save_scale_update,
&jsvals.quality);
gtk_widget_show (label);
gtk_widget_show (scale);
label = gtk_label_new (_("Smoothing"));
gtk_misc_set_alignment (GTK_MISC (label), 0.0, 0.5);
gtk_table_attach (GTK_TABLE (table), label, 0, 1, 1, 2, GTK_FILL | GTK_EXPAND, GTK_FILL, 5, 0);
scale_data = gtk_adjustment_new (jsvals.smoothing, 0.0, 1.0, 0.01, 0.01, 0.0);
scale = gtk_hscale_new (GTK_ADJUSTMENT (scale_data));
gtk_widget_set_usize (scale, SCALE_WIDTH, 0);
gtk_table_attach (GTK_TABLE (table), scale, 1, 2, 1, 2, GTK_FILL | GTK_EXPAND, GTK_FILL, 0, 0);
gtk_scale_set_value_pos (GTK_SCALE (scale), GTK_POS_TOP);
gtk_scale_set_digits (GTK_SCALE (scale), 2);
gtk_range_set_update_policy (GTK_RANGE (scale), GTK_UPDATE_DELAYED);
gtk_signal_connect (GTK_OBJECT (scale_data), "value_changed",
(GtkSignalFunc) save_scale_update,
&jsvals.smoothing);
gtk_widget_show (label);
gtk_widget_show (scale);
toggle = gtk_check_button_new_with_label(_("Optimize"));
gtk_table_attach(GTK_TABLE(table), toggle, 0, 2, 2, 3, GTK_FILL, 0, 0, 0);
gtk_signal_connect(GTK_OBJECT(toggle), "toggled",
(GtkSignalFunc)save_optimize_update, NULL);
gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(toggle), jsvals.optimize);
gtk_widget_show(toggle);
progressive = gtk_check_button_new_with_label(_("Progressive"));
gtk_table_attach(GTK_TABLE(table), progressive, 0, 2, 3, 4,
GTK_FILL, 0, 0, 0);
gtk_signal_connect(GTK_OBJECT(progressive), "toggled",
(GtkSignalFunc)save_progressive_toggle, NULL);
gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(progressive),
jsvals.progressive);
gtk_widget_show(progressive);
#ifndef HAVE_PROGRESSIVE_JPEG
gtk_widget_set_sensitive(progressive,FALSE);
#endif
com_frame = gtk_frame_new (_("Image Comments"));
gtk_frame_set_shadow_type (GTK_FRAME (com_frame), GTK_SHADOW_ETCHED_IN);
gtk_container_border_width (GTK_CONTAINER (com_frame), 10);
gtk_box_pack_start (GTK_BOX (GTK_DIALOG (dlg)->vbox), com_frame, TRUE, TRUE, 0
);
com_table = gtk_table_new (1, 1, FALSE);
gtk_container_border_width (GTK_CONTAINER (com_table), 10);
gtk_container_add (GTK_CONTAINER (com_frame), com_table);
text = gtk_text_new (NULL, NULL);
gtk_text_set_editable (GTK_TEXT (text), TRUE);
if(image_comment)
gtk_text_insert(GTK_TEXT(text),NULL,NULL,NULL,image_comment,-1);
gtk_table_attach (GTK_TABLE (com_table), text, 0, 1, 0, 1,
GTK_EXPAND | GTK_SHRINK | GTK_FILL,
GTK_EXPAND | GTK_SHRINK | GTK_FILL, 0, 0);
/* Add a vertical scrollbar to the GtkText widget */
vscrollbar = gtk_vscrollbar_new (GTK_TEXT (text)->vadj);
gtk_table_attach (GTK_TABLE (com_table), vscrollbar, 1, 2, 0, 1,
GTK_FILL, GTK_EXPAND | GTK_SHRINK | GTK_FILL, 0, 0);
gtk_widget_show (vscrollbar);
/* pw - mild hack here. I didn't like redoing the comment string
* each time a character was typed, so I associated the text area
* with the dialog. That way, just before the dialog destroys
* itself (once the ok button is hit) it can save whatever was in
* the comment text area to the comment string. See the
* save-ok-callback for more details. */
gtk_object_set_data((GtkObject *)dlg,"text",text);
gtk_widget_show (text);
gtk_widget_show (com_frame);
gtk_widget_show (com_table);
gtk_widget_show (frame);
gtk_widget_show (table);
gtk_widget_show (dlg);
gtk_main ();
gdk_flush ();
return jsint.run;
}
/* Save interface functions */
static void
save_close_callback (GtkWidget *widget,
gpointer data)
{
gtk_main_quit ();
}
static void
save_ok_callback (GtkWidget *widget,
gpointer data)
{
GtkWidget *text;
jsint.run = TRUE;
/* pw - get the comment text object and grab it's data */
text=gtk_object_get_data(GTK_OBJECT(data),"text");
if(image_comment!=NULL) {
g_free(image_comment);
image_comment=NULL;
}
/* pw - gtk_editable_get_chars allocates a copy of the string, so
* don't worry about the gtk_widget_destroy killing it. */
image_comment=gtk_editable_get_chars(GTK_EDITABLE (text),0,-1);
gtk_widget_destroy (GTK_WIDGET (data));
}
static void
save_scale_update (GtkAdjustment *adjustment,
double *scale_val)
{
*scale_val = adjustment->value;
}
static void
save_optimize_update(GtkWidget *widget,
gpointer data)
{
jsvals.optimize = GTK_TOGGLE_BUTTON(widget)->active;
}
static void
save_progressive_toggle(GtkWidget *widget,
gpointer data)
{
jsvals.progressive = GTK_TOGGLE_BUTTON(widget)->active;
}
Reference in New Issue View Git Blame Copy Permalink