gimp/etc/gimprc

# This is the system-wide gimprc file.  Any change made in this file will
# affect all users of this system, provided that they are not overriding the
# default values in their personal gimprc file.
# 
# Lines that start with a '#' are comments. Blank lines are ignored.
# 
# By default everything in this file is commented out.  The file then
# documents the default values and shows what changes are possible.
# 
# The variable ${gimp_dir} is set to the value of the environment variable
# GIMP2_DIRECTORY or, if that is not set, the compiled-in default value is
# used.  If GIMP2_DIRECTORY is not an absolute path, it is interpreted
# relative to your home directory.

# Sets the temporary storage directory. Files will appear here during the
# course of running the GIMP.  Most files will disappear when the GIMP exits,
# but some files are likely to remain, so it is best if this directory not be
# one that is shared by other users.  This is a single folder.
# 
# (temp-path "${gimp_dir}/tmp")

# Sets the swap file location. The gimp uses a tile based memory allocation
# scheme. The swap file is used to quickly and easily swap tiles out to disk
# and back in. Be aware that the swap file can easily get very large if the
# GIMP is used with large images. Also, things can get horribly slow if the
# swap file is created on a directory that is mounted over NFS.  For these
# reasons, it may be desirable to put your swap file in "/tmp".  This is a
# single folder.
# 
# (swap-path "${gimp_dir}")

# There is always a tradeoff between memory usage and speed.  In most cases,
# the GIMP opts for speed over memory.  However, if memory is a big issue,
# try to enable this setting.  Possible values are yes and no.
# 
# (stingy-memory-use no)

# On multiprocessor machines, if GIMP has been compiled with --enable-mp this
# sets how many processors GIMP should use simultaneously.  This is an
# integer value.
# 
# (num-processors 2)

# The tile cache is used to make sure the GIMP doesn't thrash tiles between
# memory and disk. Setting this value higher will cause the GIMP to use less
# swap space, but will also cause the GIMP to use more memory. Conversely, a
# smaller cache size causes the GIMP to use more swap space and less memory. 
# The integer size can contain a suffix of 'B', 'K', 'M' or 'G' which makes
# GIMP interpret the size as being specified in bytes, kilobytes, megabytes
# or gigabytes. If no suffix is specified the size defaults to being
# specified in kilobytes.
# 
# (tile-cache-size 256M)

# Sets the level of interpolation used for scaling and other transformations.
#  Possible values are none, linear, cubic and lanczos.
# 
# (interpolation-type linear)

# Sets the plug-in search path.  This is a colon-separated list of folders to
# search.
# 
# (plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")

# Sets the module search path.  This is a colon-separated list of folders to
# search.
# 
# (module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")

# Sets the interpreter search path.  This is a colon-separated list of
# folders to search.
# 
# (interpreter-path "${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")

# Sets the environ search path.  This is a colon-separated list of folders to
# search.
# 
# (environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")

# Sets the brush search path.  This is a colon-separated list of folders to
# search.
# 
# (brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")

#   This is a colon-separated list of folders to search.
# 
# (brush-path-writable "${gimp_dir}/brushes")

# Sets the pattern search path.  This is a colon-separated list of folders to
# search.
# 
# (pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")

#   This is a colon-separated list of folders to search.
# 
# (pattern-path-writable "${gimp_dir}/patterns")

# Sets the palette search path.  This is a colon-separated list of folders to
# search.
# 
# (palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")

#   This is a colon-separated list of folders to search.
# 
# (palette-path-writable "${gimp_dir}/palettes")

# Sets the gradient search path.  This is a colon-separated list of folders
# to search.
# 
# (gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")

#   This is a colon-separated list of folders to search.
# 
# (gradient-path-writable "${gimp_dir}/gradients")

# Where to look for fonts.  This is a colon-separated list of folders to
# search.
# 
# (font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")

#   This is a colon-separated list of folders to search.
# 
# (font-path-writable "${gimp_dir}/fonts")

# Specify a default brush.  The brush is searched for in the specified brush
# path.  This is a string value.
# 
# (default-brush "Circle (11)")

# Specify a default pattern. The pattern is searched for in the specified
# pattern path.  This is a string value.
# 
# (default-pattern "Pine")

# Specify a default palette.  The palette is searched for in the specified
# palette path.  This is a string value.
# 
# (default-palette "Default")

# Specify a default gradient.  The gradient is searched for in the specified
# gradient path.  This is a string value.
# 
# (default-gradient "FG to BG (RGB)")

# Specify a default font.  The font is searched for in the fontconfig font
# path.  This is a string value.
# 
# (default-font "Sans")

# When enabled, the selected brush will be used for all tools.  Possible
# values are yes and no.
# 
# (global-brush yes)

# When enabled, the selected pattern will be used for all tools.  Possible
# values are yes and no.
# 
# (global-pattern yes)

# When enabled, the selected palette will be used for all tools.  Possible
# values are yes and no.
# 
# (global-palette yes)

# When enabled, the selected gradient will be used for all tools.  Possible
# values are yes and no.
# 
# (global-gradient yes)

# When enabled, the selected font will be used for all tools.  Possible
# values are yes and no.
# 
# (global-font yes)

# Sets the default image in the "File/New" dialog.  This is a parameter list.
# 
# (default-image
#     (width 377)
#     (height 233)
#     (unit pixels)
#     (xresolution 72.000000)
#     (yresolution 72.000000)
#     (resolution-unit inches)
#     (image-type rgb)
#     (fill-type background-fill)
#     (comment "Created with The GIMP"))

# Specify a default image grid.  This is a parameter list.
# 
# (default-grid
#     (style intersections)
#     (fgcolor (color-rgba 0.000000 0.000000 0.000000 1.000000))
#     (bgcolor (color-rgba 1.000000 1.000000 1.000000 1.000000))
#     (xspacing 32.000000)
#     (yspacing 32.000000)
#     (spacing-unit inches)
#     (xoffset 0.000000)
#     (yoffset 0.000000)
#     (offset-unit inches))

# Sets the minimal number of operations that can be undone. More undo levels
# are kept available until the undo-size limit is reached.  This is an
# integer value.
# 
# (undo-levels 5)

# Sets an upper limit to the memory that is used per image to keep operations
# on the undo stack. Regardless of this setting, at least as many undo-levels
# as configured can be undone.  The integer size can contain a suffix of 'B',
# 'K', 'M' or 'G' which makes GIMP interpret the size as being specified in
# bytes, kilobytes, megabytes or gigabytes. If no suffix is specified the
# size defaults to being specified in kilobytes.
# 
# (undo-size 16M)

# Sets the size of the previews in the Undo History.  Possible values are
# tiny, extra-small, small, medium, large, extra-large, huge, enormous and
# gigantic.
# 
# (undo-preview-size large)

# Sets the pluginrc search path.  This is a single filename.
# 
# (pluginrc-path "${gimp_dir}/pluginrc")

# Sets whether GIMP should create previews of layers and channels. Previews
# in the layers and channels dialog are nice to have but they can slow things
# down when working with large images.  Possible values are yes and no.
# 
# (layer-previews yes)

# Sets the preview size used for layers and channel previews in newly created
# dialogs.  Possible values are tiny, extra-small, small, medium, large,
# extra-large, huge, enormous and gigantic.
# 
# (layer-preview-size medium)

# Sets the size of the thumbnail shown in the Open dialog. Note that GIMP can
# not create thumbnails if layer previews are disabled.  Possible values are
# none, normal and large.
# 
# (thumbnail-size normal)

# The thumbnail in the Open dialog will be automatically updated if the file
# being previewed is smaller than the size set here.  The integer size can
# contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the
# size as being specified in bytes, kilobytes, megabytes or gigabytes. If no
# suffix is specified the size defaults to being specified in kilobytes.
# 
# (thumbnail-filesize-limit 4M)

# Install a private colormap; might be useful on 8-bit (256 colors) displays.
#  Possible values are yes and no.
# 
# (install-colormap no)

# Generally only a concern for 8-bit displays, this sets the minimum number
# of system colors allocated for the GIMP.  This is an integer value.
# 
# (min-colors 144)

# Defines the color management behavior.  This is a parameter list.
# 
# (color-management
#     (mode display)
#     (display-rendering-intent perceptual)
#     (simulation-rendering-intent perceptual))

# Sets the size of the checkerboard used to display transparency.  Possible
# values are small-checks, medium-checks and large-checks.
# 
# (transparency-size medium-checks)

# Sets the manner in which transparency is displayed in images.  Possible
# values are light-checks, gray-checks, dark-checks, white-only, gray-only
# and black-only.
# 
# (transparency-type gray-checks)

# This is the distance in pixels where Guide and Grid snapping activates. 
# This is an integer value.
# 
# (snap-distance 8)

# Speed of marching ants in the selection outline.  This value is in
# milliseconds (less time indicates faster marching).  This is an integer
# value.
# 
# (marching-ants-speed 300)

# When enabled, the image window will automatically resize itself, when
# zooming into and out of images.  Possible values are yes and no.
# 
# (resize-windows-on-zoom no)

# When enabled, the image window will automatically resize itself, whenever
# the physical image size changes.  Possible values are yes and no.
# 
# (resize-windows-on-resize no)

# When enabled, this will ensure that each pixel of an image gets mapped to a
# pixel on the screen.  Possible values are yes and no.
# 
# (default-dot-for-dot yes)

# When enabled, this will ensure that the full image is visible after a file
# is opened, otherwise it will be displayed with a scale of 1:1.  Possible
# values are yes and no.
# 
# (initial-zoom-to-fit yes)

# When enabled, the X server is queried for the mouse's current position on
# each motion event, rather than relying on the position hint.  This means
# painting with large brushes should be more accurate, but it may be slower. 
# Perversely, on some X servers enabling this option results in faster
# painting.  Possible values are yes and no.
# 
# (perfect-mouse yes)

# Sets the mode of cursor the GIMP will use.  Possible values are tool-icon,
# tool-crosshair and crosshair.
# 
# (cursor-mode tool-icon)

# Context-dependent cursors are cool.  They are enabled by default. However,
# they require overhead that you may want to do without.  Possible values are
# yes and no.
# 
# (cursor-updating yes)

# When enabled, all paint tools will show a preview of the current brush's
# outline.  Possible values are yes and no.
# 
# (show-brush-outline yes)

# When enabled, the cursor will be shown over the image while using a paint
# tool.  Possible values are yes and no.
# 
# (show-paint-tool-cursor yes)

# Sets the text to appear in image window titles.  This is a format string;
# certain % character sequences are recognised and expanded as follows:
# 
# %%  literal percent sign
# %f  bare filename, or "Untitled"
# %F  full path to file, or "Untitled"
# %p  PDB image id
# %i  view instance number
# %t  image type (RGB, grayscale, indexed)
# %z  zoom factor as a percentage
# %s  source scale factor
# %d  destination scale factor
# %Dx expands to x if the image is dirty, the empty string otherwise
# %Cx expands to x if the image is clean, the empty string otherwise
# %B  expands to (modified) if the image is dirty, the empty string otherwise
# %A  expands to (clean) if the image is clean, the empty string otherwise
# %l  the number of layers
# %L  the number of layers (long form)
# %m  memory used by the image
# %n  the name of the active layer/channel
# %P  the PDB id of the active layer/channel
# %w  image width in pixels
# %W  image width in real-world units
# %h  image height in pixels
# %H  image height in real-world units
# %u  unit symbol
# %U  unit abbreviation
# 
# 
# (image-title-format "%D*%f-%p.%i (%t, %L) %wx%h")

# Sets the text to appear in image window status bars.  This is a format
# string; certain % character sequences are recognised and expanded as
# follows:
# 
# %%  literal percent sign
# %f  bare filename, or "Untitled"
# %F  full path to file, or "Untitled"
# %p  PDB image id
# %i  view instance number
# %t  image type (RGB, grayscale, indexed)
# %z  zoom factor as a percentage
# %s  source scale factor
# %d  destination scale factor
# %Dx expands to x if the image is dirty, the empty string otherwise
# %Cx expands to x if the image is clean, the empty string otherwise
# %B  expands to (modified) if the image is dirty, the empty string otherwise
# %A  expands to (clean) if the image is clean, the empty string otherwise
# %l  the number of layers
# %L  the number of layers (long form)
# %m  memory used by the image
# %n  the name of the active layer/channel
# %P  the PDB id of the active layer/channel
# %w  image width in pixels
# %W  image width in real-world units
# %h  image height in pixels
# %H  image height in real-world units
# %u  unit symbol
# %U  unit abbreviation
# 
# 
# (image-status-format "%n (%m)")

# Ask for confirmation before closing an image without saving.  Possible
# values are yes and no.
# 
# (confirm-on-close yes)

# Sets the monitor's horizontal resolution, in dots per inch.  If set to 0,
# forces the X server to be queried for both horizontal and vertical
# resolution information.  This is a float value.
# 
# (monitor-xresolution 72.000000)

# Sets the monitor's vertical resolution, in dots per inch.  If set to 0,
# forces the X server to be queried for both horizontal and vertical
# resolution information.  This is a float value.
# 
# (monitor-yresolution 72.000000)

# When enabled, the GIMP will use the monitor resolution from the windowing
# system.  Possible values are yes and no.
# 
# (monitor-resolution-from-windowing-system yes)

# Sets the size of the navigation preview available in the lower right corner
# of the image window.  Possible values are tiny, extra-small, small, medium,
# large, extra-large, huge, enormous and gigantic.
# 
# (navigation-preview-size medium)

# Sets the default settings for the image view.  This is a parameter list.
# 
# (default-view
#     (show-menubar yes)
#     (show-rulers yes)
#     (show-scrollbars yes)
#     (show-statusbar yes)
#     (show-selection yes)
#     (show-layer-boundary yes)
#     (show-guides yes)
#     (show-grid no)
#     (padding-mode default)
#     (padding-color (color-rgba 1.000000 1.000000 1.000000 1.000000)))

# Sets the default settings used when an image is viewed in fullscreen mode. 
# This is a parameter list.
# 
# (default-fullscreen-view
#     (show-menubar no)
#     (show-rulers no)
#     (show-scrollbars no)
#     (show-statusbar no)
#     (show-selection no)
#     (show-layer-boundary no)
#     (show-guides no)
#     (show-grid no)
#     (padding-mode custom)
#     (padding-color (color-rgba 0.000000 0.000000 0.000000 1.000000)))

# When enabled, an image will become the active image when its image window
# receives the focus. This is useful for window managers using "click to
# focus".  Possible values are yes and no.
# 
# (activate-on-focus yes)

# Tools such as fuzzy-select and bucket fill find regions based on a
# seed-fill algorithm.  The seed fill starts at the initially selected pixel
# and progresses in all directions until the difference of pixel intensity
# from the original is greater than a specified threshold. This value
# represents the default threshold.  This is an integer value.
# 
# (default-threshold 15)

# If enabled, the move tool changes the active layer or path when a layer or
# path is being picked. This used to be the default behaviour in older
# versions.  Possible values are yes and no.
# 
# (move-tool-changes-active no)

# When enabled, the GIMP will use a different info window per image view. 
# Possible values are yes and no.
# 
# (info-window-per-display no)

# When enabled, the GIMP will not save if the image is unchanged since
# opening it.  Possible values are yes and no.
# 
# (trust-dirty-flag no)

# Remember the current tool, pattern, color, and brush across GIMP sessions. 
# Possible values are yes and no.
# 
# (save-device-status no)

# Save the positions and sizes of the main dialogs when the GIMP exits. 
# Possible values are yes and no.
# 
# (save-session-info yes)

# Let GIMP try to restore your last saved session on each startup.  Possible
# values are yes and no.
# 
# (restore-session yes)

# Enable to display a handy GIMP tip on startup.  Possible values are yes and
# no.
# 
# (show-tips yes)

# Enable to display tooltips.  Possible values are yes and no.
# 
# (show-tool-tips yes)

# When enabled, menus can be torn off.  Possible values are yes and no.
# 
# (tearoff-menus yes)

# When enabled, you can change keyboard shortcuts for menu items by hitting a
# key combination while the menu item is highlighted.  Possible values are
# yes and no.
# 
# (can-change-accels no)

# Save changed keyboard shortcuts when the GIMP exits.  Possible values are
# yes and no.
# 
# (save-accels yes)

# Restore saved keyboard shortcuts on each GIMP startup.  Possible values are
# yes and no.
# 
# (restore-accels yes)

# When enabled, GIMP will show mnemonics in menus.  Possible values are yes
# and no.
# 
# (menu-mnemonics yes)

# How many recently opened image filenames to keep on the File menu.  This is
# an integer value.
# 
# (last-opened-size 10)

# GIMP will warn the user if an attempt is made to create an image that would
# take more memory than the size specified here.  The integer size can
# contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the
# size as being specified in bytes, kilobytes, megabytes or gigabytes. If no
# suffix is specified the size defaults to being specified in kilobytes.
# 
# (max-new-image-size 64M)

# The toolbox-color-area property has no description.  Possible values are
# yes and no.
# 
# (toolbox-color-area yes)

# The toolbox-foo-area property has no description.  Possible values are yes
# and no.
# 
# (toolbox-foo-area yes)

# The toolbox-image-area property has no description.  Possible values are
# yes and no.
# 
# (toolbox-image-area no)

# Sets the theme search path.  This is a colon-separated list of folders to
# search.
# 
# (theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")

# The name of the theme to use.  This is a string value.
# 
# (theme "Default")

# When enabled, pressing F1 will open the help browser.  Possible values are
# yes and no.
# 
# (use-help yes)

# When enabled, dialogs will show a help button that gives access to the
# related help page.  Without this button, the help page can still be reached
# by pressing F1.  Possible values are yes and no.
# 
# (show-help-button yes)

# Specifies the language preferences used by the help system. This is a
# colon-separated list of language identifiers with decreasing priority. If
# empty, the language is taken from the user's locale setting.  This is a
# string value.
# 
# (help-locales "")

# Sets the browser used by the help system.  Possible values are gimp and
# web-browser.
# 
# (help-browser gimp)

# Sets the external web browser to be used.  This can be an absolute path or
# the name of an executable to search for in the user's PATH. If the command
# contains '%s' it will be replaced with the URL, else the URL will be
# appended to the command with a space separating the two.  This is a single
# filename.
# 
# (web-browser "mozilla %s")

# The window type hint that is set on the toolbox. This may affect how your
# window manager decorates and handles the toolbox window.  Possible values
# are normal, utility and keep-above.
# 
# (toolbox-window-hint normal)

# The window type hint that is set on dock windows. This may affect the way
# your window manager decorates and handles dock windows.  Possible values
# are normal, utility and keep-above.
# 
# (dock-window-hint normal)

# Sets the pixel format of cursors the GIMP will use.  Possible values are
# bitmap and pixbuf.
# 
# (cursor-format pixbuf)

# Where to search for fractals used by the Fractal Explorer plug-in.  This is
# a colon-separated list of folders to search.
# 
# (fractalexplorer-path "${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")

# Where to search for Gfig figures used by the Gfig plug-in.  This is a
# colon-separated list of folders to search.
# 
# (gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")

# Where to search for gflares used by the GFlare plug-in.  This is a
# colon-separated list of folders to search.
# 
# (gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")

# Where to search for data used by the Gimpressionist plug-in.  This is a
# colon-separated list of folders to search.
# 
# (gimpressionist-path "${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")

# This path will be searched for scripts when the Script-Fu plug-in is run. 
# This is a colon-separated list of folders to search.
# 
# (script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")