gimp/plug-ins/gap

Project gap "Gimp Animation Package"   17. Mar 1999  release 0.99.00

--------------------------------------------------------------------
Introduction
--------------------------------------------------------------------

The GIMP (1.0.2 and 1.1.x) is a great Program for creating and manipulating
Pixelbased Images of many types. The Plugin Concept and the Procedural Database
allows Programmers to extend the Gimp's Functions in many ways.

For now there are some Plugins that supports Animation Features,
based on Layers. Each Layer of the Image is considered as one frame
of the Animation.
GAP is a collection of Plugins that extends the GIMP's animation capabilities
by supporting the creation of more complex animations.
(Additional Informations about the GAP can be found in the GimpUserManual 1.0.0
 Chapter Advanced Animation)

Idea:
	With some little changes to the gimp-core and a few new plug-ins
	gimp can operate on a series of images as if they were
	a single one.
	Each frame of an Animation can have multiple Layers.
	The user can step from frame to frame by pressing an Accelerator Key.

	Layeranimated Images can be combined with frames (multiple images)
	as I  have done in "Move Path" Plugin  (see below).
	
Concept:
	An animation consists of a series of Images of the same size & Type
	(Frames).
	In my Concept each Frame is stored seperate on Disk, using a filename
	convention that includes the frame Number and extension.

	Example: film_0001.xcf, 
	         film_0002.xcf
	         ..
	         film_0012.xcf
	
	gimp's xcf Fileformat should be used to store the frames,
	so that each frame can have more Layers.
	(Notes: 
	Sound is not supported in this Concept, but can be added
	by some of the supported Video Encoders.
	Playbackrates (framerate) is also set at video encoding)
	
	This requires a lot of Diskspace but offers much more flexibility
	while working on the animation.

	To save diskspace you may optional use gziped xcf frames
	(takes extra time to un/compress) by using the extension .xcfgz
	(gzip has to be installed on your system to do that)
	If you can accept lossy compression you may also use 
	the xjt fileformat to store your frames on jpeg based compression.
	
	The final Product can be encoded as videofile
	or converted to one multilayerd Image
	that can be saved as Animated-Gif
	(or, in the future in other Animation Formats 
	when other Load/Save Modules were added to the gimp)
	
	GAP provides frontend dialog interfaces for
	software MPEG video encoder programs.
	(mpeg_encode and mpeg2encode)
	
	GAP also provides an XANIM frontend to load AnimFrames from multimedia fileformats
	(avi, quicktime, ....) based on the famous xanim multimedia player.
	see the file README_xanim_hack for more details.
	
	

--------------------------------------------------------------------
Installation
--------------------------------------------------------------------

GAP is part of the development Gimp distribution since GIMP 1.1.4 and
should get installed along with the other plug-ins.

    
   Notes:
   - GAP provides frontend dialogs for:
      - mpeg_encode (V1.5R2)
      - mpeg2encode (V1.2)
      - xanim 2.80.1 exporting edition (with the extensions from loki entertainment)

     The frontends and the external Programs need UNIX environment to run.
      
     If you like to use that stuff, you should install
       mpeg_encode and mpeg_play
       mpeg2encode and mpeg2decode
       xanim 2.80.1 (loki)
     on your system.
     
     
     (There is no need to install those external programs to compile GAP)
        
   - GAP-Patch support for some older gimp releases
     is available at the Registry:
     
        http://registry.gimp.org/detailview.phtml?plugin=gap_patches


--------------------------------------------------------------------
Supported Videoformats
--------------------------------------------------------------------

Read(decode):
  Any Multimedia Fileformat, XANIM can read
  (AVI, Quicktime, and a lot more, see xanim docu for more information)
  
  MPEG1
    support based om mpeg library (libmpeg.a 1.3.1)   *** has NO Audio support ****

Write (encode)
  Quicktime
     (under development)
     support based on the quicktime4linux  library 1.1.3  (requires libjpeg, libpng libz)
     (Warning: most of the common codecs are not supported)

  AVI
     (under development)
       
  MJPEG
     (under development)
  
  SMJPEG
     (under development)


--------------------------------------------------------------------
Change Log
--------------------------------------------------------------------
- 0.99.00 - Move Path bugfix in the dialog
            (update preview did'nt work with gimp 1.1.2 and gtk 1.1)
          - Animated Filtercalls:
            added a 2.nd Set of Iterators (iter_ALT Procedures) for
            Plugins of GIMP 1.1.3.
          - bugfixes in iterator code generator.
          - GAP now uses gimp standard procedures to copy layers and channels.
          - prepared filename-handling for win/dos conventions.
- 0.98.02 - GAP_DB_BROWSER (1.1 variant) show help like the dbbrowser in gimp-1.1.1
- 0.98.01 - GAP_DB_BROWSER variants for GIMP 1.0 and GIMP 1.1
            new e-mail adress
            xanim-hack
- 0.98.00 - Sarted porting GAP to GIMP 1.1
            Changed internal interfaces to work with
            both GIMP 1.0.2 and GIMP 1.1 PDB.
            
            MovePath: The Layermask of imported Source Layerobjects
                      is no longer ignored.
- 0.97.01 - Added Patches for the XJT Load/Save filters
            (XJT support for gimp 1.0.0 upto gimp 1.0.2)
- 0.97.00 - Patches updated to work with gimp 1.0.2
          - New Plugin 'Frames Modify'
          - Bugfix in patchcode layer_cmds.c 
            (get/set linked state didnt work since gimp 0.99.18)
- 0.96.04 - Patches updated to work with gimp 1.0.1
- 0.96.03 - Extended Pitstop-Dialog in 'Filter All layers'
                  (now you can specify a backup file to store the
		  Image after each non-interactive filtercall,
		  futher you may skip the filtercall.
		  These extensions were done because the MapObject
		  Plugin crashes sometimes
		  (after 3 hours calculating time on a PII 300Mhz processor)
          - Extended Parameters for non-interactive call of 
                  plug_in_gap_range_to_multilayer and
                  plug_in_gap_split
                  (the image_id of the created image is now returned)                
- 0.96.02 - Added Clip To Image Option and Tooltips in MovePath Plugin.
          _ Added Plugin 'Framesequence shift'
          - Exended 'Frames To Image' Plugin 
                  (now you can set framerate and framename
                  for the generated layers) 
          - Extended 'Duplicate Frames' Plugin
                  (now you can use a framerange as source,
                   not just the current frame)
- 0.96.01 - Bugfix (refresh problems when GAP's array dialog was used twice
                    in one plugin -- because of double call to gtk_init)
- 0.96.00 - Added AnimFrames scale, resize and crop
          - Added 'Split Image to Frames" (plug_in_gap_split)
          - Added 'Frames MPEG_encode'  plug_in_gap_mpeg_encode
                   (Requires free software 'mpeg_encode' to run)
          - Added 'Frames MPEG2_encode'  plug_in_gap_mpeg2encode
                   (Requires software 'mpeg2encode' to run)
          - Most Dialogs changed  (some have got tooltips)
            (now based on the new gap_arr_dialog module)
          - internal changes (header files for all modules)
          - bugfix: memory leak in gap_layer_copy.c
- 0.95.04 - Iterator Generation: added support for iteration on PARAM_DRAWABLE type
            Updated Iterator_ALT procedures for:
            - BumpMap          (now you can use animated bumpmaps)
            - DepthMerge
            - Displace
            - Refract
- 0.95.03 - Patches updated to work with gimp 1.0.0
            (Removed patches for gimp 0.99.19 due to sizelimit
            in the Plugin registry)
- 0.95.02 - Added Script sel-to-anim-img.scm
- 0.95.01 - Made Patches usable for GIMP release 0.99.31
            (there were no updates needed, just added some links
             from 0.99.29 to 0.99.31)
- 0.95.00 - extended MovePath plugin.
            Now you can specify an angle for each point of the path
            how to rotate the moving object layer.
- 0.94.02 - Patches updated to work with gimp 0.99.29
- 0.94.01 - Added new features to 'Frames to Image' Plugin:
            Select of flatten_modes, and optional exclude of the BG-Layer.
- 0.94.00 - Move Path Plugin uses now 1 Point per default.
            (If you want to move an Object, you'll have to)
            add Point(s) explicit.
          - bugfix: Move Path Plugin initial value for src_paintmode
                    undefined values sometimes caused 'cant get new layer' Error
                    and Sourcelayers were not copied to the frames
          - Patches updated to work with gimp 0.99.28
          - Updated Foundation adress
- 0.93.06 - Patches updated to work with gimp 0.99.27
            implemented new versions of
              gimage:gimage_lower_top_layer
              gimage:gimage_lower_bot_layer
            (the old versions were slow and failed
             on Images with many layers)
- 0.93.05 - Patches updated to work with gimp 0.99.24
            Patches extended:
            Added gimp-core functions to layers dialog:
            raising/lowering a Layer to Top/Bottom of the layerstack
- 0.93.04 - Patches updated to work with gimp 0.99.22
            Window with Info Message if no Source Image was
            selected in MovePath
- 0.93.03 - Bugfix of the Patches updated to work with gimp 0.99.19
            (duplicate_into should now copy channels too)
- 0.93.02 - Patches updated to work with gimp 0.99.19

- 0.93.01 - Bugfix
           (GAP filters now should work on frames that are not 
           in the current directory)

- 0.93.00 - Internal "Gen Code by name" Button
            generates additional file <plugin_name>_Iterator.c
            (see README_Developers for more details)
          - The Patches to the gimp core
            (needed to run GAP bend, movel, adjust, implayer Plugins)
            are now available for gimp releases:
              0.99.16
              0.99.17
              0.99.18
              0.99.19
            the patches are stored in seperate versioned directories,
            The apply_patch.sh script now expects the gimp-version
            as calling argument.

- 0.92.00 - "Filter all Layers"  Dialog Window after 1.st and 2.nd
            Interactive Plugin call. (to give a chance to see
            the effects caused by the plugin or to cancel
            before proceeding) 
          - New Patches to the gimp core
              "gimp_layer_get_linked"
              "gimp_layer_set_linked"
          
            (for Plugins "adjust", "bend", "movel"
             these Plugins are not part of GAP, you can get them
             from the Plugin Registry)
                          
          - Internal"Gen Code by name" Button if GAP_DEBUG environment is set.

- 0.91.01 - "Apply Varying" Button insensitive if animated call
             not available.
          - Convert Frames Dialog window
             now hides Colors and Dither entries
             if Conv to INDEXED is not selected.
             

- 0.91.00  - Patches to the gimp core were updated to work with gimp 0.99.16
             (plus: gimage_update_full was added for GAP)
             (The Patches do work with  gimp 0.99.17 too)

            - "plug_in_gap_layers_run_animfilter"
              New Plugin allows animated calls to (more than 50) existing Plugins

--------------------------------------------------------------------
How to use
--------------------------------------------------------------------

WebTip:	My GIMP-page http://pages.hotbot.com/arts/hof/index.html
	contains an illustrated GAP-tutorial, some demo-animations
	and other plugins.
	
	The chapter "Advanced Animation" in the Gimp User Manual 1.0
	(by Karin & Olof Kylander) also describes GAP with many
	Illustrations.



- Creating multiple frames (AnimFrames)

      - from an existing single image
           Save your Image as XCF file.  (File->Save as)
           use a Name that ends up in _0001.xcf (or _0001.xcfgz)
           
           Then duplicate your image (Video->Duplicate)
           You'll be asked how much Copies you need.
           (Note: all copies are stored on disk immediate
                  without explicite save)
 
       - from an existing (layeranimated) multilayer image
           use
               Video->Split Img to frames
               
           This will create Frames, a series of Images on disk,
           with a Name that ends up in _0001.xcf).
           Optional you may use other extensions. (.xcfgz, .jpg ...)

           WARNING: The extension defines the fileformat
                    of the Frames. Most of the other Formats
                    (than GIMP's .xcf Format) can NOT save
                    multilayer frames or frames with alpha channels.
          
      - from outside the gimp
           You may rename and copy existing XCF Images
           according to the frame naming conventions.
           <img>_0001.xcf
           <img>_0002.xcf
           ...
           Then load (only one of them) into the GIMP.
           
- Navigation (Goto)
      It is recommanded to define some Accelerator Keys for quick
      walk through the frames.
      Here are my settings (excerpt from my $HOME/.gimp/menurc )

      (menu-path "<Image>/Video/Goto First" "<control><alt>1")
      (menu-path "<Image>/Video/Goto Prev" "<alt>1")
      (menu-path "<Image>/Video/Goto Next" "<alt>2")
      (menu-path "<Image>/Video/Goto Any" "<alt>3")
      (menu-path "<Image>/Video/Goto Last" "<control><alt>2")
     

- Playback
      playbak of multilayered image is not available.
      (it would be very slow)
      But you can convert your frames to one Multilayer Image
         (Video->Frames to Image)
      And then playback the newly created Image
         (Filters->Animation->Playback)          

- Move Path (Make Things Move)
      For this Plugin you need a series of frames
      and one single image (that may have more layers).

      - The Source Image must be opened in the gimp
      - The Source Image must be another Image than the destination frame
        (if you really want to copy layers from destination frame
         to destination frame(s) you have to duplicate it first)
      - The Source Image must be from the same type (RGB, INDEXED ..) as
        the destination frame.

        In other words: To run the 'Move Path' Plugin you have to open at
                        least 2 Images of the same type.      
      
      
      
      Invoke this Plugin from one of the frames:
      (Menu: Video->Move Path)
      
      The selected Layer(s) of the Source Image
         is (are) copied into the selected range of frames.
         Each handled frame recieves exactly one Copy of the selected Layer
         from the Source Image.
         
      If you use other Stepmodes than "None",
        the Layers of the SourceImage are stepped through,
        and the next handled frame recieves the next
        Layer from the Source_images Layerstack.
      
      The copies of the SourceLayer(s) were modified by transitions
        with varying Parameters.
        Parameters:
        - Position (X/Y)
        - Size     (Width/Height)
        - Opacity
        - Rotation (angle from -360 to +360 degrees)
       - SourceLayer (depends on Stepmode)

      The Parameters were changed linear from one starting point to
      the next point. Per default the move Path has only only 1 Point.
      (So the Src-Layers(s) are copied to all frames of the framerange
       at constant Position, Size and Opacity)
      If you want your Source_layers to move, grow, rotate or to fade (in or out)
      you have to add one more points (limited to 256) to define a Path.

      The affected range is selected by  Start Frame - End Frame.
      Each affected frame recieves exactly one copy of the (current)
      Sourcelayer adjusted to the current Prameters.
      The Layerstack defines if the pasted copy appears
      in the foreground (0 == on top) or below other layers that are
      already in the frame.
      With the toggle button 'Clip To Frame' the the copied layer
      is clipped to the destination Frames Image Width and Height.
       
      With PreviewFrame you can select the frame Number to display
      in the "Mov Path Preview".
      You first have to Adjust the PreviewFrame
      then press the "UpdPreview" Button.
      
      Tips:
         - with the UpdPreview Button you can blend in the
           selected Layer of the Source Image.
           If you want to adjust position it may be useful to see
           the background.
           Therfore you can make the source image
           transparent (modify the opacity value) or
           put the sourcelayer below the background
           (set the Layerstack to higher value)
           Then pres UpdPreview Button again.
         
         - If you let your objects (source layers) rotatate or
           change their size, set Handle mode to 'Center'.
           (If you use another Handle mode you may get unwanted
           moves of your object, caused by resizing)
         
         - Speed:
           Move path alternates the settings linear from
           point to point, so things move (or happen) in constant speed
           between 2 Points.
           
           If you want to make accelerated moving Obcets, you'll
           have to set more points with growing distances.
           
           Example:
           
           [1] [2]  [3]   [4]    [5]     [6]
            +---+----+-----+------+-------+

           The affected range has 25 frames, and you have set 6 points
           with growing distances in one straight line.
           That gives 5 frames (== equal time) for each part of the path,
           but each part has another length. This results in different
           (growing) speeds for each part of the path.
           
     
- Convert frames to one multilayered Image.
    This can be done with
    
          (Video->Frames to Image)
          
    The selected Source Range of Frames is copied into one
    new created multilayered destination Image.
    Each frame results in one Layer in the destination Image.
    (or nothing if the source frame has no selected layer)
    
    With Layer Basename you can chosse a name for the resulting
    Layers in the destination Image. The string [####] is replaced
    by the frame number. 
       Example: my_layer_[##]  results in: my_layer_01, my_layer_02 .... 
    
    Layer Mergemode:
      - Extend as necessary   Build a destination Layer by merging
                              selected Layers of one Sourceframe.
                              The destination Layer's size will be
                              the outline-rectangle of all selected
                              Layers.
                              
      - Clipped to image      Build a destination Layer by merging 
                              selected Layers of one Sourceframe.
                              The destination Layer's size will be
                              the Imagesize.
                              
      - Clipped to bottom layer  Build a destination Layer by merging
                              selected Layers of one Sourceframe.
                              The destination Layer's size will be
                              the size of the lowest selected Layer.
                              
      - Flattened image       Build destination Layer by flattening
                              the source_layers copied from one Sourceframe
                              There will be no transparent parts
                              in the destination Layers.
                              The destination Layer's size will be
                              the Imagesize.
    
    With the 'Exclude BG-Layer' check_button pressed,
    the Backgrund-Layers of all the Sourceframes are excluded
    from the copy, regardless if they are selected or not.
    Otherwise BG-Layers are handled like all other Layers.
   
    (If you are using Flatten_mode 'Flatten' the BG-Color will fill all
     transparent parts of the resulting destination layer(s).)

    Layer Selection:
    ----------------
    Here you can select which layer(s) of a frame is(are) used
    to build the destination Layer.
    
    Select Layer(s):
       Pattern is equal to LayerName
       Pattern is Start of LayerName
       Pattern is End of Layername
       Pattern is a Part of LayerName
           With these settings you can select Layers
           by their Layername.
           (All Layers with a layername matching the Select Pattern
           are selected).
        
       Pattern is LayerstackNumber List
           Layers are selected by their Layerstackposition,
           where 0 is the top layer.
           The Pattern is a list of layerstack numbers or
           number ranges. (0-3 matches to the upper 4 layers)       
       Pattern is REVERSE-stack List"
           Here you can specify Layerstacknumbers in REVERSE order.
           (where 0 is the background Layer)
           
       All Visible (ignore Pattern)
           All visible Layers are selected.
           (The Select Pattern is ignored)
       
    Select Pattern:
       String to identify a Layer. It can be a part of the layername
       or a List of Layerstacknumbers (like this one: "0, 2-5, 9")
       depending on your choice in Select Layer(s) above.
    Case Sensitive:
       Lowercase and UPPPERCASE letters are considered as equal
       if this checkbutton is set to off.
    Invert Selection:
       Select all unselected Layers.



- Modify Frames
    
    The GAP-tool 'Frames Modify' provides the feature to perform functions
    on one ore more selected Layer(s) in all frames of the selected framerange.
    
    The Layers can be selected by (parts of) their name, or by their
    layerstack numbers.
    (for more information on Layer Selection see above).
    
    Available Functions are:
	    "0:set_visible,
	     1:set_invisible,
	     2:set_linked,
	     3:set_unlinked,
	     4:raise,
	     5:lower,
	     6:merge_expand,
	     7:merge_img,
	     8:merge_bg,
	     9:apply_filter,
	     10:duplicate,
	     11:delete,
	     12:rename"
    
    
    The function 'apply_filter' brigs up a dialog window that is
    similar to the PDB-Browser, where you can select any available
    filter.

    If you use the PDB-Browser's button "Apply Varying", the
       filterparameters will slightly change in each handled frame
       from start to end.

       - If there is more than one selected layer in a frame
         each of the selected layers within the same frame
         will be processed with the same filterparameter values.
    
         (for more info se 'Animated calls of Plug-In Filters' below)
 


    It is a good idea to use the same layerstack structure in all
    your frames. Another hint is that you assign useful names to
    your layers. that should be done consequent for all frames.
    
    Example 1 (useful Layertack structure/names)
    
    
                    film_0001.xcf    film_0002.xcf  ....  film_0010.xcf       
    ---------------------------------------------------------------------
    
    layerstack [0]  mouse_01         mouse_02              mouse_10
    layerstack [1]  cat_01           cat_02                cat_10
    layerstack [2]  tree_01          tree_02               tree_10
    layerstack [3]  background       background            background
    

    
    Example 2 (not recommanded)
    
    
                    film_0001.xcf    film_0002.xcf  ....  film_0010.xcf       
    ---------------------------------------------------------------------
    
    layerstack [0]  tree             layer                 mouse_10
    layerstack [1]  bg               layer                 cat_10
    layerstack [2]                   layer                 background 
    layerstack [3]                   background                       
    



- Saving MPEG files:

    GAP provides only frontend dialogs to call MPEG encoding programs.
    You must have installed one of them if you want to save
    your finished AnimFrames in MPEG Video Fileformat.

    The MPEG-encoders are:

        1) mpeg_encode 1.5	
	   freely distributed Berkeley MPEG-1 Video  Encoder
	   ftp://mm-ftp.cs.berkeley.edu/pub/multimedia/mpeg/bmt1r1.tar.gz
	   
	   (Can read AnimFrame in the Fileformats:
	      .yuv 
	      .ppm
	      .pnm
	      .jpg
	   )
	   (can call filterprograms to convert from other fileformats)
	
	2) mpeg2encode 1.2
	   MPEG-2 and MPEG-1 Encoder / Decoder, Version 1.2
	   (MPEG Software Simulation Group)
	   
	   Web:      http://www.mpeg.org/MSSG
	   FTP:      ftp://ftp.mpeg.org/pub/mpeg/mssg
	   E-mail:   mssg@mpeg.org  (author contact)

	   (Can read AnimFrame in the Fileformats:
	      .yuv 
	      .ppm
	   )

     To Prepare for MPEG encoding:
     
     - Use 'Frames Convert' from the Video Menu 
       to convert your AnimFrames to .ppm 
       (or another Fileformat that can be read directly by
        your encoder)
      
     - If you have a Layerstack-Animated Multilayer Image
       You can use 'Split Img to Frames' from the Video Menu.
     
     - If you are using mpeg_encode and
       height or width are not multiples of 16:
          Use 'Frames Scale' or 'Frames Crop' from the Video Menu
          on the newly converted/created AnimFrames.
     
     - Then use 'Encode/MPEG2 (mpeg2encode)' or 'Encode/MPEG1 (mpeg_encode)'
       from the Video Menu.
       (Invoked from one of the prepared AnimFrames)
	   
       Both encoders offer a lot of Parameter Settings for the experienced
       User. The Parameters are passed to the encoder in a Parameterfile.
       The frontend dialog shows only the most important Parameters,
       but generates a documented Parameterfile with default values
       for the other Parameters.
       You can generate the Parameterfile with or without starting
       the encoder.
       (You may start the encoder later by executing the Startscript
        from a Unixshell. The Startscript is generated by the frontend dialog)
       
       For more information on the Parameters please refer to the encoders
       documentations.
	   

- Tips:
  - Convert one multilayer Image to a series of frames:
   
     This can be done if you create a series of empty frames.
     The Number of frames should be equal to the number of layers
     in your multilayered image.
     (File->New, Video->Duplicate)
     
     Then use the "Move Path" Plugin (Video->Move Path)
     to copy the layers to all your frames.
     Use 2 Points with both X=0, Y=0, Opacity=100%, Width=100%, Height=100%,
     select the 1.st Layer of your multilayer Image as Source,
     Handle=LeftTop, Mode=Normal, Stepmode=Loop
    
     Finally you can delete the (empty) backround Layers
     (Video->Frames LayerDel)  with Layerstack Parameter >= 1

  - Reverse the order of Layers within one multilayer Image
      Convert one multilayer Image to a series of frames (see above)
      then select Video->FramesToImage and use an invers Range
      from N to 1. 

  - Convert multiple frames from one Fileformat to another:
      rename your images to fit GAP framename conventions
      (Example: img_0001.tif, img_0003.tif img_0004.tif)
      
      then load the 1.st image into the gimp (File->Load)
      and select (Video->Frames Convert)
      In the following dialog window you can select
      the desired destination filtype by its typical extension
      (.jpg, .bmp or so on)

      If your source images have layers and/or cannels
      but your destination filtype do not support layers/cannels
      you may optional choose flatten (1), to collapse all layers
      into one before saving destination frames.
      (flatten has no affect to your source frames)
      
      Type conversions to RGB, GRAY and INDEXED were needed
      if your desired destination filetype does not support
      the type of the source image.
      Example: to convert from (.jpg) to (.gif)
              you have to set the destinationtype "INDEXED",
              (.gif can not handle RGB, only GRAY and INDEXED)
              
              Convert to INDEXED reduces the number of colors
              downto 256 (or less).

      
- NO UNDO
      There is no Undo for the AnimFrame Plugins.
      Note: If you step to the next frame (Video->Goto Next)
            the current frame is saved to disk and the next frame
            is loaded into the image. 
            All Undo steps were cleared at this time.
      
      Tip: "undo" for Move Path
         You can Delete the Layers at desired Layerstackposition
         (0 == on top) by (Video->Frames LayerDel)
         So you can remove all the Layers inserted by "Move Path" plugin.

- About Locks
   All the GAP Plugins are using a lock, based on the image_id
   (that is common to all frame images within one gimp session).
   This lock disables to run other gap-plugins (or the same plugin twice)
   from the frames Image menu
   while the current GAP-plugin is working on that frame.
   If you cancel a running GAP-plugin (Cancel Button in the progress window,
   or kill it from a shell) the lock remains. To unlock save the current
   frame image, close all views to that image, then reload the frame image.
   (or quit and restart the gimp)

  WARNING:
  It is not recommanded to open more than one frame of
  an animation at the same time.
  (File->Open "img_0001.xcf"
   File->Open "img_0002.xcf")
  
  In this constellation both gap plugins may concurrent 
  in save/load to/from the same file.
  Example:
     call from "img_0001.xcf" Video->Delete Frames (range 0001 to 0003)
           now img_0004.xcf is renamed to img_0001.xcf
               img_0005.xcf is renamed to img_0002.xcf
 
     then  
     call from "img_0002.xcf" Video->Goto First
            the img_0002.xcf (its old content) is saved,
                             overwiting wht was img_0004.xcf before.
  If you make the 2nd call while the 1st one is in progress,
  you may trash your frames (2 writers on one file) and/or crash
  your gimp session.

- Animated calls of Plug-In Filters:

  First of all, you need a multilayered Image.
  You can use "<Image>->Video->Frames to Image"
  to create one from a series of Frames,
  or Duplicate the backround Layer of a single Layered Image
  (Press Ctrl-C within the layers_dialog Window N-times)

  Then call from wihin the multilayer Image:

      "<Image>->Filters->Animation->Filter all Layers"
  
  You'll get a window similar to the PDB-Browser, that shows
  all available Plug-Ins in a listbox (and informations about
  the selected Plugin on the right side).

  Note: The Listbox does not show the full PDB.
        (Plugins without RunMode, Image, Drawable Parameters
         are never listed here, regardless to your wildcard selection)
  
  Select one of the listed Plugins and press one of the Buttons:

  "Apply Varying":
      The selected Plugin is called 2 times in Interactive mode,
      1. for the backround Layer
      2. for the Top Layer.
      
      For all further Layers, the Plug-In will work non-interactive
      with the Iterated Inbetween Values.
      Therefore the plugin must have an _Iterator or _Iterator_ALT
      procedure, to modify the "last stored values"
       
      (GAP provides such procedures for more than 50 existing plugins)
      
      If the Iterator Procedure is not available, the
      "Apply Varying" Button is set insensitive on the selected procedure.
      
      Note:
            It is possible to Iterate Values of the Type PARAM_DRAWABLE,
            (such as the BumpMap in plug_in_bump_map:
            You may use a layerstack-animated Image as animated Bump-map)
            This will only work, if from and to Values are Layers within the same Image.
            The Iteration is done on the Layerstackindex in that case.
            and the inbetween values for the non-interactive filtercalls
            will be the Layers between the from and to Layerstackindex.
            (an animation sequence as the user might expect)             
  
  "Apply Constant":
      The selected Plugin is called 2 times in Interactive mode,
      For all further Layers, the Plug-In will work non-interactive
      using the last stored values.


  The Script sel-to-anim-img.scm simplifies the creation of Animated
  Images. Invoke the Script from:

             "<Image>->Script-Fu->Animators->Sel To AnimImage"
             
  The Script creates a new Image with n copies of the current selection.
  Then it invokes the animated call of Plug-In Filters (optional)
  on the generated new Image.

  Note: - Some Plugins may not work correct or crash when called
          in NON_INTERACTIVE mode. (see TESTPROT_iter_ALT)
        
        - Some Pugin's in your PDB can have earlier or later versions
          If their Interfaces were changed
          you get the message:(in the shell window)
        
               ERROR: xxxx_Iterator stored Data missmatch in size N != M
               
          when using the "Apply Varying" Button.
          In that case you can try to generate the needed _Iterator Procedure
          for your Plugins current Interface by yourself.
          (see file: README_devlopers)
        
        - The wr_trans plugin collection (available in the Plugin Registry)
          provides plugin interfaces for animated calls of the GIMP's transformer
          Tools. (Rotate, Scale, Shear, Perspective)

- How to write (or generate) Animated Plugins:
      (see file: README_devlopers)

--------------------------------------------------------------------
changes to the gimp-core:
--------------------------------------------------------------------

Please note that NO CHANGES are needed if you have GIMP 1.1

	For my Plugins I added NEW internals 
	(they are not part of the official gimp 1.0.2,
	 in most cases the Patch just offers a PDB-Interface
	 for already existing GIMP-core internal Functions)

	- gimp_drawable_set_image
        - gimage_update_full
        - gimp_layer_get_linked
        - gimp_layer_set_linked
        - floating_sel_attach_proc
        - floating_sel_rigor_proc
        - floating_sel_relax_proc
        - gimage_floating_sel_attached_to
        
        my private extension for the layers_dialog Window
        
        - gimage_lower_top_layer
        - gimage_lower_bot_layer
        
        Affected gimp-core sources (in directory app/)
             gimage.c
             gimage.h
             gimage_cmds.c
             gimage_cmds.h
             layer_cmds.c
             layer_cmds.h
             layers_dialog.c
             internal_procs.c
             floating_sel_cmds.c
             floating_sel_cmds.h

=============================================
plugin's included in release gap 0.99.00:
=============================================

  plug_in_gap_next
	"This plugin exchanges current image with (next nubered) image from disk.",
	 "<Image>/Video/Goto Next",

  plug_in_gap_prev
	 "This plugin exchanges current image with (previous nubered) image from disk.",
	 "<Image>/Video/Goto Prev",

  plug_in_gap_first
	 "This plugin exchanges current image with (lowest nubered) image from disk.",
	 "<Image>/Video/Goto First",

  plug_in_gap_last
	 "This plugin exchanges current image with (highest nubered) image from disk.",
	 "<Image>/Video/Goto Last",

  plug_in_gap_goto
	 "This plugin exchanges current image with requested image (nr) from disk.",
	 "<Image>/Video/Goto Any",

  plug_in_gap_del
	 "This plugin deltes the given number of frames from disk
	  including the current frame.",
	 "<Image>/Video/Delete Frames",

  plug_in_gap_dup
	 "This plugin duplicates the current frames on disk n-times.",
	 "<Image>/Video/Duplicate Frames",

  plug_in_gap_exchg
	 "This plugin exchanges content of the current with destination frame.",
	 "<Image>/Video/Exchange Frame",


  plug_in_gap_move
	 "This plugin copies layer(s) from one sourceimage to multiple frames on disk,
	  varying position, size and opacity.",
	 "<Image>/Video/Move Path",

  plug_in_gap_range_to_multilayer
         "This plugin creates a new image from the given range of frame-images.
          Each frame is converted to one layer in the new image, according to flatten_mode.
          (the frames on disk are not changed).",
	 "<Image>/Video/Frames to Image",

  plug_in_gap_range_flatten
	 "This plugin flattens the given range of frame-images (on disk)",
	 "<Image>/Video/Frames Flatten",

  plug_in_gap_range_layer_del
	 "This plugin deletes one layer in the given range of frame-images (on disk).
	  exception: the last remaining layer of a frame is not deleted",
	 "<Image>/Video/Frames LayerDel",

  plug_in_gap_range_convert
	 "This plugin converts the given range of frame-images to other fileformats
	  (on disk) depending on extension",
	 "<Image>/Video/Frames Convert",

  plug_in_gap_layers_run_animfilter
	 "This plugin calls another plugin for each layer of an image,
	  varying its settings (to produce animated effects).
	  The called plugin must work on a single drawable
	  and must be able to RUN_WITH_LAST_VALS",
         "<Image>/Filters/Animation/Filter all Layers"

  plug_in_gap_anim_resize
	 "This plugin resizes all anim_frames (images on disk)
	  to the given new_width/new_height",
	 "<Image>/Video/Frames Resize",

  plug_in_gap_anim_crop
	 "This plugin crops all anim_frames (images on disk)
	  to the given new_width/new_height",
	 "<Image>/Video/Frames Crop",
			 "RGB*, INDEXED*, GRAY*",
			 PROC_PLUG_IN,
			 nargs_resize, nreturn_vals,
			 args_resize, return_vals);

  plug_in_gap_anim_scale
	"This plugin scales all anim_frames (images on disk)
	 to the given new_width/new_height",
	 "<Image>/Video/Frames Scale",

  plug_in_gap_split
	"This plugin splits the current image to anim frames (images on disk).
	 Each layer is saved as one frame",
	 "<Image>/Video/Split Img to Frames",

  plug_in_gap_mpeg_encode
	"This plugin calls mpeg_encode to convert anim frames to MPEG1,
	 or just generates a param file for mpeg_encode.
	 (mpeg_encode must be installed on your system)",
	 "<Image>/Video/Encode/MPEG1 (mpeg_encode)",

  plug_in_gap_mpeg2encode
         "This plugin calls mpeg2encode to convert anim frames to MPEG1 or MPEG2,
          or just generates a param file for mpeg2encode.
          (mpeg2encode must be installed on your system)",
         "<Image>/Video/Encode/MPEG2 (mpeg2encode)",

  plug_in_gap_shift
	 "This plugin Exchanges frames numbers in the given range.
	 (discfile frame_0001.xcf is renamed to frame_0002.xcf,
	  2->3, 3->4 ... n->1)",
	  "<Image>/Video/Framesequence Shift",

  plug_in_gap_modify
	 "This plugin performs a modifying action on each selected layer
	  in each selected framerange"
	 <Image>/Video/Frames Modify
  
  script-fu-selection-to-anim-image
	 "Create a multilayer image from current selection and
	  apply any PDB Filter to all layer-copies"
         "<Image>->Script-Fu->Animators->Sel To AnimImage"