-------------------------------------- Installation instructions for GIMP @GIMP_APP_VERSION@ -------------------------------------- There are some basic steps to building and installing GIMP. GIMP @GIMP_APP_VERSION@ replaces earlier GIMP 2.x versions. It is advised that you uninstall them before installing GIMP @GIMP_APP_VERSION@. If you want to keep your older GIMP 2.x installation in parallel to GIMP @GIMP_APP_VERSION@, you have to choose a separate prefix which is not in your default library search path. GIMP @GIMP_APP_VERSION@ is fully backward compatible to all earlier GIMP 2.x version. Plug-ins and scripts written for GIMP 2.6 or earlier GIMP 2.x versions will continue to work and don't need to be changed nor recompiled to be used with GIMP @GIMP_APP_VERSION@. The most important part is to make sure the requirements for a build are fulfilled. We depend on a number of tools and libraries which are listed below. For libraries this means you need to also have the header files installed. ****************************************************************** * Unless you are experienced with building software from source, * * you should not attempt to build all these libraries yourself! * * We suggest that you check if your distributor has development * * packages of them and use these instead. * ****************************************************************** 1. You need to have installed a recent version of pkg-config (>= @GIMP_PKGCONFIG_VERSION@) available from http://www.freedesktop.org/software/pkgconfig/. 2. You need intltool (at least @INTLTOOL_REQUIRED_VERSION@, but preferably a newer version). Intltool can be downloaded from http://ftp.gnome.org/pub/gnome/sources/intltool/ You are recommended to install gettext version @XGETTEXT_RECOMMENDED_VERSION@ or over. Earlier gettext had issues with script-fu localization, ending up in incomplete GIMP localization. 3. You need to have GEGL version @GEGL_REQUIRED_VERSION@ or newer and babl version @BABL_REQUIRED_VERSION@ or newer. You can get them from http://gegl.org/ or clone them from the GNOME git repository: git://git.gnome.org/babl git://git.gnome.org/gegl 4. You need to have installed GTK+ version @GTK_REQUIRED_VERSION@ or newer. GIMP also need a recent versions of GLib (>= @GLIB_REQUIRED_VERSION@), GDK-Pixbuf (>= @GDK_PIXBUF_REQUIRED_VERSION@), and Pango (>= @PANGOCAIRO_REQUIRED_VERSION@). Sources for these can be grabbed from ftp://ftp.gtk.org/. 5. We use cairo >= @CAIRO_REQUIRED_VERSION@, which is hosted at http://www.cairographics.org/. 6. We require PangoCairo, a Pango backend using Cairo. Make sure you have Cairo, FreeType2 and fontconfig installed before you compile Pango. GIMP depends on freetype2 being newer than version @FREETYPE2_REQUIRED_VERSION@ and fontconfig @FONTCONFIG_REQUIRED_VERSION@ or newer. Older versions are known to have bugs that seriously affect the stability of GIMP. We also require HarfBuzz @HARFBUZZ_REQUIRED_VERSION@ or newer, an OpenType text shaping tool. As this is a dependency for Pango, you will likely have it installed, but you may have to install a development package for the headers. 7. Access of remote files is implemented in the URI plug-in. There are several possible implementations for this. The implementation used is determined when you configure GIMP. By default the GIO/GVfs backend is used. If you don't have GVfs support on your target platform, you should pass the '--without-gvfs' option to configure. The configure script will then try to detect another method for accessing remote files. 8. The file-compressor plug-in requires zlib, libbzip2, and liblzma to be installed. All these libraries are required dependencies. 9. For metadata access GIMP requires the gexiv2 library. It is hosted at http://redmine.yorba.org/projects/gexiv2/wiki . 10. Some other third party libraries or programs are needed for some of the available plug-ins. libpng, libjpeg and lcms are hard dependencies that can not be disabled. 11. You may want to install other third party libraries or programs that are needed for some of the available plug-ins. We recommend to check that the following libraries are installed: libpoppler, libtiff, webkit, libmng, librsvg, libwmf, libgs (Ghostscript), libaa and libjasper. 12. The Python extension requires Python 2 development headers (@PYTHON2_REQUIRED_VERSION@ or newer) to be present. You will also need PyGTK and the respective development headers. 13. Configure GIMP by running the `configure' script. You may want to pass some options to it, see below. 14. Build GIMP by running `make'. The use of GNU make is recommended. If you need to tweak the build to make it work with other flavours of make, we'd appreciate if you'd send us a patch with the changes. 15. Install GIMP by running `make install'. In order to avoid clashes with other versions of GIMP, we install a binary called gimp-@GIMP_APP_VERSION@. By default there's also a link created so that you can type 'gimp' to start gimp-@GIMP_APP_VERSION@. 16. Summary of required packages and what version you need: ATK: @ATK_REQUIRED_VERSION@ babl: @BABL_REQUIRED_VERSION@ cairo: @CAIRO_REQUIRED_VERSION@ Fontconfig: @FONTCONFIG_REQUIRED_VERSION@ freetype2: @FREETYPE2_REQUIRED_VERSION@ GDK-PixBuf: @GDK_PIXBUF_REQUIRED_VERSION@ GEGL: @GEGL_REQUIRED_VERSION@ GLib: @GLIB_REQUIRED_VERSION@ GTK+: @GTK_REQUIRED_VERSION@ HarfBuzz: @HARFBUZZ_REQUIRED_VERSION@ libbzip2 libjpeg libpng: @LIBPNG_REQUIRED_VERSION@ liblzma: @LIBLZMA_REQUIRED_VERSION@ Little CMS: @LCMS_REQUIRED_VERSION@ pangocairo: @PANGOCAIRO_REQUIRED_VERSION@ zlib 17. Summary of optional packages: Package Name | Version | Feature libaa - ASCII art gs - ghostscript webkit @WEBKIT_REQUIRED_VERSION@ Help browser & webpage libjasper - JPEG 2000 libmng - MNG openexr @OPENEXR_REQUIRED_VERSION@ OpenEXR libpoppler @POPPLER_REQUIRED_VERSION@ PDF import cairo-pdf @CAIRO_PDF_REQUIRED_VERSION@ PDF export python 2 @PYTHON2_REQUIRED_VERSION@ Python plug-ins librsvg @RSVG_REQUIRED_VERSION@ SVG libtiff - TIFF libwmf @WMF_REQUIRED_VERSION@ WMF libXcursor - X11 Mouse Cursor libxpm - XPM Please make sure you don't have any old GTK+-2.x, jpeg, etc. libraries lying around on your system, otherwise configure may fail to find the new ones. Generic instructions for configuring and compiling auto-configured packages are included below. Here is an illustration of commands that might be used to build and install GIMP. The actual configuration, compilation and installation output is not shown. % tar xvfz gimp-@GIMP_VERSION@.tar.gz # unpack the sources % cd gimp-@GIMP_VERSION@ # change to the toplevel directory % ./configure # run the `configure' script % make # build GIMP % make install # install GIMP The `configure' script examines your system, and adapts GIMP to run on it. The script has many options, some of which are described in the generic instructions included at the end of this file. All of the options can be listed using the command `./configure --help'. There are several special options the GIMP `configure' script recognizes. These are: --enable-shared and --disable-shared. This option affects whether shared libraries will be built or not. Shared libraries provide for much smaller executables. The default is to enable shared libraries. Disabling shared libraries is almost never a good idea. --enable-debug and --disable-debug. This option causes the build process to compile with debugging enabled. If debugging is disabled, GIMP will instead be compiled with optimizations turned on. The default is for debugging to be disabled. NOTE: This option is intended primarily as a convenience for developers. --enable-profile and --disable-profile. This options causes the build process to compile with execution profiling enabled. The default is for profiling to be disabled. NOTE: This option is intended primarily as a convenience for developers. --enable-ansi and --disable-ansi. This option causes stricter ANSI C checking to be performed when compiling with GCC. The default is for strict checking to be disabled. NOTE: This option is intended primarily as a convenience for developers. --with-gimpdir=DIR. This option changes the default directory GIMP uses to search for its configuration files from ~/.config/GIMP/@GIMP_APP_VERSION@ (the directory .config/GIMP/@GIMP_APP_VERSION@ in the user's home directory) to ~/.config/DIR/@GIMP_APP_VERSION@. If DIR is an absolute path, the directory will be changed to DIR. --enable-binreloc. When compiled for Linux with this option enabled, GIMP will be binary relocatable. Plug-ins and data files will be searched relative to the gimp binary instead of in the paths defined at compile time. --with-shm=[none|sysv|posix|auto]. This option allows you to specify how image data is transported between the core and plug-ins. Usually the best way to do this is detected automatically. --without-libtiff. configure will bail out if libtiff can not be found. You better fix the underlying problem and install these libraries with their header files. If you absolutely want to compile GIMP without support for TIFF you need to explicitly disable them using this option. --without-aa. The AA plug-in needs libaa and configure checks for its presence. Use --without-aa if you run into problems. --without-libxpm. The XPM plug-in needs libxpm and configure checks for its presence. If for some reason you don't want to build the XPM plug-in even though the library is installed, use --without-libxpm to disable it explicitly. --without-libmng. The MNG plug-in needs libmng and configure checks for its presence. If for some reason you don't want to build the MNG plug-in even though the library is installed, use --without-libmng to disable it explicitly. --without-wmf. The WMF plug-in needs libwmf2 and configure checks for its presence. Use --without-wmf if you run into problems. --without-webkit. If for some reason you don't want to build the Help Browser plug-in, you can use --without-webkit to disable it explicitly. --without-librsvg. If for some reason you want to build GIMP without SVG support, you can build --without-librsvg. --without-poppler. If for some reason you don't want to build the PDF Import plug-in that uses libpoppler, you can use --without-poppler. --without-print. If for some reason you don't want to build the Print plug-in based on the GtkPrint API, you can build with --without-print. --without-gvfs. If you don't want to use GIO/GVfs to access remote files, you can pass --without-gvfs to the configure script. --without-libcurl. If you don't want to use libcurl to access remote files, you can pass --without-libcurl to the configure script. --without-alsa. If you don't want to compile ALSA support into the MIDI input controller module, you can use the --without-alsa option. --without-linux-input. If you don't want to compile the Linux Input controller module, you can use the --without-linux-input option. --without-hal. If you want to build the Linux Input controller module without HAL support, you can use the --without-hal option. --without-mac-twain. If you don't want to compile the Mac OS X TWAIN plug-in, you can use the --without-mac-twain option. --with-gif-compression=[lzw|rle|none]. Allows to tune the compression algorithm used by the GIF plug-in. If you are afraid of Unisys' LZW patent (which should have expired in most countries by now), you can go for simple run-length encoding or even configure the plug-in to create uncompressed GIFs. --enable-gtk-doc. This option controls whether the libgimp API references will be created using gtk-doc. The HTML pages are included in a standard tarball, so you will only need this if you are building from SVN. --with-html-dir=PATH. This option allows to specify where the libgimp API reference should be installed. You might want to modify the path so it points to the place where glib and gtk+ installed their API references so that the libgimp reference can link to them. --disable-mp. This option allows you to disable support for multiple processors. It is enabled by default. --with-sendmail=[PATH]. This option is used to tell GIMP where to find the sendmail command. Normally this options don't have to be used because configure tries to find it in the usual places. --with-desktop-dir=[PATH]. This option specifies where to install desktop files. These files are used by desktop environments that comply to the specs published at freedesktop.org. The default value ${prefix}/share should be fine if your desktop environment is installed in the same prefix as gimp. No files are installed if you call configure with --without-desktop-dir. --disable-default-binary. Use this option if you don't want to make gimp-@GIMP_APP_VERSION@ the default GIMP installation. Otherwise a link called gimp pointing to the gimp-@GIMP_APP_VERSION@ executable will be installed. --disable-gimp-console. Use this option if you don't want the gimp-console binary to be built in addition to the standard binary. gimp-console is useful for command-line batch mode or as a server. --disable-python. If for some reason you don't want to build the Python based PyGIMP plug-in, you can use --disable-python. --without-script-fu. If for some reason you don't want to build the Script-Fu plug-in, you can use --without-script-fu. --without-xmc. The X11 Mouse Cursor(XMC) plug-in needs libXcursor and configure checks for its presence. If for some reason you don't want to build the XMC plug-in even though the library is installed, use --without-xmc to disable it explicitly. The `make' command builds several things: - A bunch of public libraries in the directories starting with 'libgimp'. - The plug-in programs in the 'plug-ins' directory. - Some modules in the 'modules' subdirectory. - The main GIMP program 'gimp-@GIMP_APP_VERSION@' in `app'. The `make install' commands installs the GIMP header files associated with the libgimp libraries, the plug-ins, some data files and the GIMP executable. After running `make install' and assuming the build process was successful you should be able to run `gimp'. When ./configure fails ====================== 'configure' uses pkg-config, a tool that replaces the old foo-config scripts. The most recent version is available from http://www.freedesktop.org/software/pkgconfig/ 'configure' tries to compile and run a short GTK+ program. There are several reasons why this might fail: * pkg-config could not find the file 'gtk+-2.0.pc' that gets installed with GTK. (This file is used to get information about where GTK+ is installed.) Fix: Either make sure that this file is in the path where pkg-config looks for it (try 'pkg-config --debug' or add the location of gtk+-2.0.pc to the environment variable PKG_CONFIG_PATH before running configure. * Libraries you installed are not found when you attempt to start GIMP. The details of how to fix this problem will depend on the system: On Linux and other systems using ELF libraries, add the directory to holding the library to /etc/ld.so.conf or to the environment variable LD_LIBRARY_PATH, and run 'ldconfig'. On other systems, it may be necessary to encode this path into the executable, by setting the LDFLAGS environment variable before running configure. For example: LDFLAGS="-R/home/joe/lib" ./configure or LDFLAGS="-Wl,-rpath -Wl,/home/joe/lib" ./configure * An old version of the GTK+ libraries was found instead of your newly installed version. This commonly happens if a binary package of GTK+ was previously installed on your system, and you later compiled GTK+ from source. Fix: Remove the old libraries and include files. If you are afraid that removing the old libraries may break other packages supplied by your distributor, you can try installing GLib, GTK+ and other libraries in a different prefix after setting the environment variable PKG_CONFIG_LIBDIR to point to lib/pkgconfig/ in that new prefix so that it does not try to read the *.pc files from the default directory (/usr/lib/pkgconfig). However, removing the old packages is often the easier solution. A detailed log of the ./configure output is written to the file config.log. This may help diagnose problems. When ./configure fails on plug-ins ================================== There are some GIMP plug-ins that need additional third-party libraries installed on your system. For example to compile the plug-ins that load and save JPEG, PNG or TIFF files you need the related libraries and header files installed, otherwise you'll get a message that plug-in xyz will not be built. If you are sure that those libraries are correctly installed, but configure fails to detect them, the following might help: Set your LDFLAGS environment variable to look for the library in a certain place, e.g. if you are working in a bash shell you would say: export LDFLAGS="-L -L" before you run configure. Set your CPPFLAGS environment variable to look for the header file in a certain place, e.g. if you are working in a bash shell you would say: export CPPFLAGS="-I -I" before you run configure. Generic Instructions for Building Auto-Configured Packages ========================================================== To compile this package: 1. Configure the package for your system. In the directory that this file is in, type `./configure'. If you're using `csh' on an old version of System V, you might need to type `sh configure' instead to prevent `csh' from trying to execute `configure' itself. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation, and creates the Makefile(s) (one in each subdirectory of the source directory). In some packages it creates a C header file containing system-dependent definitions. It also creates a file `config.status' that you can run in the future to recreate the current configuration. Running `configure' takes a minute or two. To compile the package in a different directory from the one containing the source code, you must use GNU make. `cd' to the directory where you want the object files and executables to go and run `configure' with the option `--srcdir=DIR', where DIR is the directory that contains the source code. Using this option is actually unnecessary if the source code is in the parent directory of the one in which you are compiling; `configure' automatically checks for the source code in `..' if it does not find it in the current directory. By default, `make install' will install the package's files in /usr/local/bin, /usr/local/lib, /usr/local/man, etc. You can specify an installation prefix other than /usr/local by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for machine-specific files and machine-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Normally, all files are installed using the same prefix. `configure' ignores any other arguments that you give it. If your system requires unusual options for compilation or linking that `configure' doesn't know about, you can give `configure' initial values for some variables by setting them in the environment. In Bourne-compatible shells, you can do that on the command line like this: CC='gcc -traditional' DEFS=-D_POSIX_SOURCE ./configure The `make' variables that you might want to override with environment variables when running `configure' are: (For these variables, any value given in the environment overrides the value that `configure' would choose:) CC C compiler program. Default is `cc', or `gcc' if `gcc' is in your PATH. INSTALL Program to use to install files. Default is `install' if you have it, `cp' otherwise. INCLUDEDIR Directory for `configure' to search for include files. Default is /usr/include. (For these variables, any value given in the environment is added to the value that `configure' chooses:) DEFS Configuration options, in the form '-Dfoo -Dbar ...' LIBS Libraries to link with, in the form '-lfoo -lbar ...' If you need to do unusual things to compile the package, we encourage you to teach `configure' how to do them and mail the diffs to the address given in the README so we can include them in the next release. 2. Type `make' to compile the package. 3. Type `make install' to install programs, data files, and documentation. 4. You can remove the program binaries and object files from the source directory by typing `make clean'. To also remove the Makefile(s), the header file containing system-dependent definitions (if the package uses one), and `config.status' (all the files that `configure' created), type `make distclean'. The file `configure.ac' is used as a template to create `configure' by a program called `autoconf'. You will only need it if you want to regenerate `configure' using a newer version of `autoconf'.