In legacy layer modes that may produce out-of-range output given
in-range input, clamp the result after blending and before
compositing, instead of after compositing, to avoid producing
different results than 2.8 in certain cases.
Add "clamp-input" (which clamps the input values to [0..1])
and "clamp-output" (which clips the final result to [0..1]),
properties, parameters and GUI to:
- GimpLevelsConfig
- GimpOperationLevels
- The levels tool dialog
- The gimp_drawable_levels() PDB API
The old deprecated gimp_levels() PDB API now sets both clamping
options to TRUE which restores the 2.8 behavior.
Also reorder some stuff in GimpLevelsConfig and elsewhere so the
levels parameters are always in the same order.
Override get_invalidated_by_change() with the same logic as
get_required_for_output(), to avoid unnecessary invalidation.
Avoid format conversion when input and aux have the same format.
Add pass-through fast path when the ROI is completely inside/
outside the cropped rectangle.
Use bulk memcpy(), instead of per-pixel test-and-copy, in
process().
This avoids unnecessarily processing regions of the input and/or
aux nodes that will get cropped out. In particular, this avoids
processing cropped-out regions when using the filter tool in split-
view mode.
Keep multi-threading disable on the cage transform operation. It is now
fixed but is a lot much slower than when single-threaded, making it
painful to use on bigger images.
So let's reenable later if we can improve this. See bug 787663.
Use gimp:buffer-source-validate, introduced in the previous commit,
for the source node of GimpDrawables. This avoids threading issues
with layer groups, or any other drawables that may use a validating
buffer, by making sure the buffer is validated before any
succeeding operations, and hence the associated graph is processed
on the same thread as the parent composition.
Restore multithreaded processing in GimpOperationLayerMode.
gimp:buffer-source-validate is a drop-in replacement for
gegl:buffer-source, however, if the attached buffer has a
validating tile-handler, it makes sure the required region is
validated during process(). This avoids a situation in which
validation happens in different worker threads at the same time
during the processing of a succeeding operation; since validation
is protected by the buffer's tile-storage mutex, this can result in
either a deadlock (currently), or an effective fallback to single-
threaded processing.
Update the dprod production of generated enum files to include
abbreviated value descriptions, as per the previous commits.
Add a comment for translators above the abbreviated descriptions,
specifying the full description they abbreviate.
Temporarily disable multithreading for GimpOperationLayerMode, to
avoid the deadlock. The environment variable
GIMP_MULTITHREADED_COMPOSITING can be set to reenable it, for the
sake of debugging.
It was accidentally made applicable to layers by commit
7d345071c7. Only the non-legacy
color-erase mode shoule be applicable to layers (since 2.8 didn't
allow it as a layer mode), while the legacy mode is only available
for painting, and in the fade dialog.
When rendering a gradient with a repeat mode of NONE, don't sample
the gradient at 0.0 and 1.0, for pixels that lie to the left and to
the right of the gradient, respectively. Instead, use the left
color of the leftmost segment directly, and, likewise, the right
color of the rightmost segment. This always gives us the right
color for such pixels, even when there are gradient stops, that may
use different colors, at 0.0 and 1.0,
Remember the gradient segment at which the most-recent sample lies,
and pass it to gimp_gradient_get_color_at() as a seed for segement
lookup on the next sample. This improves the performance
marginally.
Pass through mode uses the same compositing logic as REPLACE mode,
however, it's a special case of REPLACE, where the layer is already
composited against the backdrop. This allows us to take a few
shortcuts that aren't generally applicable to REPLACE mode.
Add a dedicated op class for pass through mode, derived from the
REPLACE mode op, implementing these shortcuts.
this commit changes just those which make no difference to
functionality: property and object member defaults that get overridden
anyway, return values of g_return_val_if_fail(), some other stuff.
Commit 3635cf04ab moved the special
handling of bottom-layer compositing to GimpOperationLayerMode.
This required giving the op more control over the process()
function of its subclasses. As a temporary workaround, the commit
bypassed the subclasses entirely, using "gimp:layer-mode" for all
modes. This is the reckoning :)
Add a process() virtual function to GimpOperationLayerMode, which
its subclasses should override instead of
GeglOperationPointComposer3's process() functions. Reinstate the
subclasses (by returning the correct op in
gimp_layer_mode_get_oepration()), and have them override this
function.
Improve the way gimp_operation_layer_mode_process() dispatches to
the actual process function, to slightly lower its overhead and
fix some thread-safety issues.
Remove the "function" field of the layer-mode info array, and have
gimp_layer_mode_get_function() return the
GimpOperationLayerMode::process() function of the corresponding
op's class (caching the result, to keep it cheap.) This reduces
redundancy, allows us to make the ops' process() functions private,
and simplifies SSE dispatching (only used by NORMAL mode,
currently.)
Move the blend and composite functions of the non-specialized
layer modes to gimpoperationlayermode-{blend,composite}.[hc],
respectively, to improve code organization.
Move the SSE2 composite functions to a separate file, so that they
can be built as part of libapplayermodes_sse2, allowing
libapplayermodes to be built without SSE2 compiler flags. This
allows building GIMP with SSE acceleration enabled, while running
the resulting binary on a target with no SSE accelration.
Add a "blend_function" field to the layer-mode info array, and use
it to specify the blend function for the non-specialized modes.
This replaces the separate switch() statement that we used
previously.
Remove the "affected_region" field of the layer-mode info array.
We don't need it anymore, since we can go back to using
GimpOperationLayerMode's virtual get_affected_region() function.
Last but not least, a bunch of code cleanups and consistency
adjustments.
GimpFilter's is_last_node field only reflects the item's position
within the parent stack. When a layer is contained in a pass-
through group, it can be the last layer of the group, while not
being the last layer in the graph as a whole (paticularly, if
there are visible layers below the group). In fact, when we have
nested pass-through groups, whether or not a layer is the last
node depends on which group we're considering as the root (since
we exclude the backdrop from the group's projection, resulting in
different graphs for different groups).
Instead of rolling our own graph traversal, just move the relevant
logic to GimpOperationLayerMode, and let GEGL do the work for us.
At processing time, we can tell if we're the last node by checking
if we have any input.
For this to work, GimpOperationLayerMode's process() function needs
to have control over what's going on. Replace the derived op
classes, which override process(), with a call to the layer mode's
function (as per gimp_layer_mode_get_function()) in
GimpOperationLayerMode's process() function. (Well, actually, this
commit keeps the ops around, and just hacks around them in
gimp_layer_mode_get_operation(), because laziness :P)
Keep using the layer's is_last_node property to do the invalidation.
More than 2000 lines of code less in app/, instead of
if (instance->member)
{
g_object_unref/g_free/g_whatever (instance->member);
instance->member = NULL;
}
we now simply use
g_clear_object/pointer (&instance->member);
which is the same as g_object_class_list_properties() but filters
out the properties for which we don't want to create a GUI.
Use it in gimp_prop_gui_new().
Return only the config object's GType and do the g_object_new() in the
caller (one caller only needs the type, there is no need to create a
dummy object just to get to its type).
Commit 1e6acbd4e1 modified the
generated enum recipes to run gimp-mkenums from the source
directory, instead of the build directory, so that only the
basenames of the corresponding header files would appear in
the comment at the top of the generated files. This was a
mistake -- $(GIMP_MKENUMS) is expecting to be invoked from the
build directory.
Switch back to running gimp-mkenums from the build directory. To
avoid including the relative path from the build directory to the
source directory in the generated file, add a @basename@ production
variable to gimp-mkenums, which exapnds to the basename of the
input file, and use it instead of @filename@ in the recipes for the
generated enum files.
When regenerating an enum file, don't copy it back to the source
directory if it hasn't actually changed. This allows using a read-
only source directory where the enum header is newer than the
generated file, as long as they're not really out of sync.
OTOH, *do* touch the generated source-dir file even when unchanged,
in order to avoid re-running its recipe on the next build, however,
allow this to silently fail (which is harmless).
Takes a layer mode and a composite mode, and returns the region
included in the composition.
Use this function in GimpOperationLayerMode, instead of testing
for specific composite modes directly. Will also be used by
the next commit.
Indentation cleanup in gimp_layer_modes.h
... so that we can use it for other functions that involve
compositing regions (which we do in the next commit).
Rename gimp_operation_layer_mode_get_affect_mask() and
friends to _get_affected_region().
We check them into git, so this makes it easier to keep them in
sync when using a separate build directory.
Case in point -- this commit also syncs a few enum files that went
out-of-sync with their headers.
Ell