Pass the help-id specified by the procedure to the core, and use it in
the core if set instead of always using the procedure's name (which
was probably good enough for all eternity, but it's still more
consistent this way).
- libgimpbase: change GPParam to transfer all information about the
GValues we use, in the same way done for GPParamDef. GPParam is now
different from GimpParam from libgimp, pointers can't be casted any
longer. The protocol is now completely GimpPDBArgType-free. Remove
gp_params_destroy() from the public API.
- libgimp: add API to convert between an array of GPParams and
GimpValueArray, the latter is now the new official API for dealing
with procedure arguments and return values, GimpParam is cruft (the
wire now talks with GimpPlugIn more directly than with the members
of GimpPlugInInfo, which need additional compat conversions).
- libgimp, app: rename gimpgpparamspecs.[ch] to simply
gimpgpparams.[ch] which is also more accurate because they now
contain GValue functions too. The code that used to live in
app/plug-in/plug-in-params.h is now completely in libgimp.
- app: contains no protocol compat code any longer, the only place
that uses GimpPDBArgType is the PDB query procedure implementation,
which also needs to change.
- app: change some forgotten int32 run-modes to enums.
- Change the wire protocol's GPProcInstall to transmit the entire
information needed for constructing all GParamSpecs we use, don't
use GimpPDBArgType in GPProcInstall but an enum private to the wire
protocol plus the GParamSpec's GType name. Bump the wire protocol
version.
- Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which
take care of converting between GPParamDef and GParamSpec. They
share code as far as possible.
- Change pluginrc writing and parsing to re-use GPParamDef and the
utility functions from gimpgpparamspecs.
- Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch],
the entire core uses proper GParamSpecs from the wire protocol now,
the whole file will follow down the drain once we use a GValue
representation on the wire too.
- In gimp_plug_in_handle_proc_install(), change the "run-mode"
parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not
already an enum). and change all places in app/ to treat it as an
enum value.
- plug-ins: fix cml-explorer to register correctly, a typo in
"run-mode" was never noticed until now.
- Add gimpgpcompat.[ch] in libgimp to deal with all the transforms
between old-style wire communication and using GParamSpec and
GValue, it contains some functions that are subject to change or
even removal in the next steps.
- Change the libgimp GimpProcedure and GimpPlugIn in many ways to be
able to actually install procedures the new way.
- plug-ins: change goat-exercise to completely use the new GimpPlugIn
and GimpProcedure API, look here to see how plug-ins will look in
the future, of course subject to change until this is finished.
- Next: changing GPParam to transmit all information about a GValue.
Pass the GEGL tile-cache size, swap path, and thread-count to plug-
ins as part of their config, and have libgimp set the plug-in's
GeglConfig accordingly upon initialization.
Registering a full menu path as a procedure's menu label is now
forbidden and causes the procedure to be rejected.
Bump the plug-in protocol version so a pluginrc containing such cruft
is not used.
...upon exporting an image
Step 1: make it configurable just like "Export EXIF" etc.
app, libgimp: add "export-color-profile" config option
Add it to the preferences dialog, and pass it on to plug-ins in the
GPConfig message. Add gimp_export_color_profile() to libgimp.
Nothing uses this yet.
Also remove all traces of it from the plug-in protocol and raise the
protocol version to 0x0100 (we now allow features and therefore
version bumps in stable, and the master protocol version should always
be higher). Fix the code that aborts plug-in startup on protocol
version mismatch, we can't use gimp_message() because we have no
protocol.
Pass the current icon theme directory to plug-ins through the
config message, and add a gimp_icon_theme_dir() libgimp function
for retrieving it. Note that we already have a similar
gimp_icon_get_theme_dir() PDB function, which we keep around, since
it can be used to dynamically query for the current icon dir,
unlike the former, and since it returns a dynamically-allocated
string, while the rest of the config-related functions return
statically allocated strings.
Use the new function, instead of gimp_get_icon_theme_dir(), in
gimp_ui_init(). This allows gimp_ui_init() to run without making
any PDB calls. Consequently, this allows us to start plug-ins that
call gimp_ui_init() without entering the main loop in the main app.
We're going to add a plug-in that displays an interactive dialog
while the main app is blocking waiting for an operation to
complete, and we need to be able to start the plug-in without
entering the main loop, to avoid the possibility of arbitrary code
being executed during the wait.
Bump the protocol version.
...protocol calls.
Some calls are waiting for answers, for instance plugin procedures, and
tiles which expects data and acknoledgement.
This would result in error messages such as:
"expected tile ack and received: 5" (5 is GP_PROC_RUN)
Typically because a thread would run a procedure while another would
receive tiles.
The item groups has all the duplicated functionality from drawable
and vectors (name, visible, linked etc).
Hijack the unused GIMP_PDB_REGION and turn it into GIMP_PDB_ITEM;
change all protocol aware files accordingly and bump the protocol
version number. Change script-fu to handle the new type.
2009-01-17 Michael Natterer <mitch@gimp.org>
* all files with a GPL header and all COPYING files:
Change licence to GPLv3 (and to LGPLv3 for libgimp).
Cleaned up some copyright headers and regenerated the parsers in
the ImageMap plugin.
svn path=/trunk/; revision=27913
2008-07-14 Sven Neumann <sven@gimp.org>
Add new PDB data type PDB_COLORARRAY for using arrays of GimpRGB
colors as argument or return value.
* libgimpbase/gimpbaseenums.[ch] (enum GimpPDBArgType): replaced
the unused GIMP_PDB_BOUNDARY with GIMP_PDB_COLORARRAY.
* libgimpbase/gimpprotocol.h: increased GIMP_PROTOCOL_VERSION.
(struct _GPParam): added d_colorarray entry to the union.
* libgimpbase/gimpprotocol.c
* libgimp/gimp.[ch]
* app/pdb/gimp-pdb-compat.c
* app/plug-in/plug-in-params.c
* app/plug-in/gimpplugin-message.c
* tools/pdbgen/pdb.pl: deal with the new data type.
* tools/pdbgen/enums.pl: regenerated.
* plug-ins/pygimp/pygimp-pdb.c
* plug-ins/script-fu/scheme-wrapper.c: handle the new data type.
svn path=/trunk/; revision=26189
2008-03-27 Sven Neumann <sven@gimp.org>
Properly pass the focus from the core to plug-in dialogs:
* libgimpbase/gimpprotocol.[ch]: added a user_time member to the
GimpConfig struct. Bumped the protocol version to 0x0012.
* app/core/gimp-gui.[ch]
* app/gui/gui-vtable.c: added gimp_get_user_time() to get the
timestamp of the last user interaction.
* app/plug-in/gimppluginmanager-call.c
(gimp_plug_in_manager_call_run): pass the timestamp to in the
GimpConfig message.
* libgimp/gimp.[ch]:
* libgimp/gimp.def: added method to access the timestamp as set
in the config message.
* libgimp/gimpui.c (gimp_ui_init): construct a fake startup ID and
set the DESKTOP_STARTUP_ID environment variable.
svn path=/trunk/; revision=25263
2007-04-12 Sven Neumann <sven@gimp.org>
* libgimpbase/gimpprotocol.[ch] (struct _GPParam): don't redefine
the GimpParasite struct, just use it.
* libgimp/gimp.c: include gimpparasite.h.
* libgimp/gimpitemcombobox.c (gimp_item_combo_box_new): initialize
combo_box_type to suppress a compiler warning.
* libgimpwidgets/gimpmemsizeentry.c (gimp_memsize_entry_new):
avoid dereferencing a type-punned pointer.
svn path=/trunk/; revision=22237
2006-06-01 Sven Neumann <sven@gimp.org>
Added basic framework for plug-ins to access the use_cpu_accel
configuration (bug #342860):
* app/composite/gimp-composite.[ch]: added new function
gimp_composite_use_cpu_accel().
* libgimpbase/gimpprotocol.[ch]: added use_cpu_accel to the config
message.
* app/plug-in/gimppluginmanager-call.c: pass the return value of
gimp_composite_use_cpu_accel() for config.use_cpu_accel.
* libgimp/gimp.[ch]: make the config value accessible by means of
a new function gimp_use_cpu_accel().
* libgimp/gimp.def: updated.
2006-03-10 Sven Neumann <ven@gimp.org>
* app/widgets/gimpaction.c: factored out some code to a utility
function.
* app/config/gimpguiconfig.[ch]
* app/config/gimprc-blurbs.h
* app/dialogs/preferences-dialog.c
* app/gui/gui.c
* app/plug-in/plug-in-run.c
* libgimp/gimp.c
* libgimpbase/gimpprotocol.[ch]: renamed tool_tips to tooltips in
variables and in the gimprc.
* app/config/gimpbaseconfig.[ch]: removed stingy_memory_use from
the GimpBaseConfig struct.
2005-12-29 Michael Natterer <mitch@gimp.org>
* libgimpbase/gimpbaseenums.[ch] (enum GimpPDBArgType): renamed
GIMP_PDB_PATH to GIMP_PDB_VECTORS and add the former as an alias
for the latter.
* libgimp/gimp.h (union _GimpParamData): added back d_path member
to maintian source compatibility.
* tools/pdbgen/pdb.pl
* libgimp/gimp.c
* app/pdb/procedural_db.c
* app/plug-in/plug-in-params.c
* libgimpbase/gimpprotocol.[ch]
* plug-ins/pygimp/pygimp-pdb.c
* plug-ins/script-fu/siod-wrapper.c: s/GIMP_PDB_PATH/GIMP_PDB_VECTORS/
* app/pdb/image_cmds.c
* app/pdb/procedural_db_cmds.c
* app/pdb/vectors_cmds.c
* libgimp/gimpimage_pdb.c
* libgimp/gimpvectors_pdb.c
* tools/pdbgen/enums.pl: regenerated.
2004-10-04 Sven Neumann <sven@gimp.org>
* app/config/gimpguiconfig.[ch]
* app/config/gimprc-blurbs.h: added gimprc option "show-help-button".
* app/dialogs/preferences-dialog.c: added a GUI for it.
* app/dialogs/file-save-dialog.c
* app/dialogs/image-new-dialog.c
* app/dialogs/quit-dialog.c
* app/display/gimpdisplayshell-close.c
* app/widgets/gimphelp-ids.h: don't set help-ids on confirmation
dialogs.
* libgimpbase/gimpprotocol.[ch]
* libgimp/gimp.[ch]: added boolean "show_help_button" to the
config message.
* app/plug-in/plug-in-run.c: pass the new preference to the plug-in.
* libgimpwidgets/gimpdialog.[ch]: added new function that allows to
set whether new dialogs should get a help button added.
* app/gui/gui.c
* libgimp/gimpui.c: call gimp_dialogs_show_help_button() according
to the gimprc settings.
2004-09-13 Michael Natterer <mitch@gimp.org>
Restore binary compatibility of the wire protocol that was
broken by the recent GPConfig changes:
* libgimpbase/gimpprotocol.[ch] (struct _GPConfig)
(_gp_config_read)
(_gp_config_write): argh, we can't use the two bytes padding
because that's just a binary compatible struct change, but inserts
two bytes into the byte stream that goes over the wire. Use the
first two bytes of the former "gdouble gamma" instead.
* app/plug-in/plug-in-run.c (plug_in_run)
* libgimp/gimp.c (gimp_config): changed accordingly.
2004-09-03 Michael Natterer <mitch@gimp.org>
* libgimpbase/gimpprotocol.h (struct _GPConfig): replaced the
never used "gdouble gamma" with 8 reserved gint8 and stuffed two
gint8 behind "gint8 show_tool_tips" where they fit in in a binary
compatible way due to 32bit aligning of the following "gint32
min_colors". Use the latter ones for "check_size" and
"check_type".
* libgimpbase/gimpprotocol.c (_gp_config_read,write): changed
accordingly to pass the new stuff over the wire.
* app/plug-in/plug-in-run.c: ditto. Pass the transpareny values
from GimpDisplayConfig to plug-ins.
* libgimp/gimp.[ch] (gimp_config): remember the new config values.
(gimp_check_size,type): new functions returning the new config values.
* libgimp/gimpdrawablepreview.c (gimp_drawable_preview_init):
use the new values to configure preview->area accordingly.
2004-02-17 Sven Neumann <sven@gimp.org>
* libgimpbase/gimpprotocol.[ch]: changed wm_name to app_name in
the GimpConfig struct; increased GIMP_PROTOCOL_VERSION.
* app/plug-in/plug-in-run.c (plug_in_run): pass the return value
of g_get_application_name() to the plug-ins.
* libgimp/gimp.[ch]: removed function gimp_wm_name(). Set the
plug-in's application name if an app_name is passed in the config
message.
* libgimp/gimpui.c: removed usage of gimp_wm_name(); it was wrong
to do it this way and caused all plug-ins claim to be the gimp-1.3
executable in their error messages.
* libgimp/gimp.def: removed symbol gimp_wm_name.
* configure.in: reset gimp_binary_age and gimp_interface_age.
* app/core/gimpimage.c (gimp_image_name_changed): removed unused
variable.
2003-11-08 Sven Neumann <sven@gimp.org>
* app/config/gimpconfig-error.h: added GIMP_CONFIG_ERROR_VERSION
to GimpConfigError enum.
* libgimpbase/gimpprotocol.h: renamed GP_VERSION to
GIMP_PROTOCOL_VERSION.
* libgimp/gimp.c
* app/plug-in/plug-in-run.c: changed accordingly.
* app/plug-in/plug-in-rc.[ch]: write the protocol version to the
pluginrc and stop parsing when a wrong protocol version is found.
* app/plug-in/plug-ins.c: pass a GError to plug_in_rc_parse().
2003-11-07 Michael Natterer <mitch@gimp.org>
* libgimpbase/gimpprotocol.[ch]: added "wm_name", "wm_class",
"display_name" and "monitor_number" to the GPConfig message.
Increased protocol version number.
* libgimp/gimp.[ch] (gimp_config): read them from the GPConfig
message and remember them.
Added public accessors for the new config values.
* libgimp/gimpui.c (gimp_ui_init): pass wm_name and wm_class to
gtk_init() and export the display/screen to use to the
environment.
* app/core/gimp.[ch]: added vtable entries to get the values
from the GUI.
* app/gui/gui-vtable.c: implement the vtable entries.
* app/plug-in/plug-in-run.c: fill in the GPConfig values using
the new Gimp vtable functions.
* app/display/gimpdisplayshell-layer-select.c
* app/display/gimpdisplayshell.c
* app/gui/about-dialog.c
* app/gui/channels-commands.c
* app/gui/color-notebook.c
* app/gui/convert-dialog.c
* app/gui/file-dialog-utils.[ch]
* app/gui/file-new-dialog.c
* app/gui/file-open-dialog.c
* app/gui/file-save-dialog.c
* app/gui/gradient-editor-commands.c
* app/gui/gradients-commands.c
* app/gui/grid-dialog.c
* app/gui/image-commands.c
* app/gui/info-dialog.[ch]
* app/gui/info-window.c
* app/gui/layers-commands.c
* app/gui/module-browser.c
* app/gui/offset-dialog.c
* app/gui/palette-import-dialog.c
* app/gui/qmask-commands.c
* app/gui/resize-dialog.c
* app/gui/splash.c
* app/gui/stroke-dialog.c
* app/gui/templates-commands.c
* app/gui/tips-dialog.c
* app/gui/vectors-commands.c
* app/tools/gimpcurvestool.c
* app/tools/gimplevelstool.c
* app/widgets/gimpdock.c
* app/widgets/gimperrorconsole.c
* app/widgets/gimptexteditor.c
* app/widgets/gimptoolbox.c
* app/widgets/gimpviewabledialog.[ch]
* libgimpwidgets/gimpfileselection.c
* libgimpwidgets/gimpquerybox.c
* libgimpwidgets/gimpunitmenu.c
* plug-ins/helpbrowser/dialog.c
* plug-ins/ifscompose/ifscompose.c: replaced all calls to
gtk_window_set_wmclass() by gtk_window_set_role() and all
"const gchar *wmclass_name" parameters by "const gchar *role".
Cleaned up the window role strings.
2003-06-20 Michael Natterer <mitch@gimp.org>
Really commit the changes this time:
* configure.in: bumped version number to 1.3.16.
* libgimpbase/gimpprotocol.h: increased protocol version number so
old extensions will refuse to load.
2003-01-07 Michael Natterer <mitch@gimp.org>
* libgimpwidgets/gimphelpui.[ch]: removed gimp_help_init() and
gimp_help_free(). Added _gimp_help_init() instead.
* libgimpwidgets/gimpwidgets.def: changed accordingly.
* libgimpwidgets/gimpwidgets.c (gimp_widgets_init): call
_gimp_help_init() so it doesn't need to be done in all plug-ins
manually.
* libgimp/gimpcompat.h: added gimp_help_init() and gimp_help_free()
here as COMPAT_CRUFT.
* app/gui/gui.c
* plug-ins/FractalExplorer/Dialogs.c
* plug-ins/Lighting/lighting_ui.c
* plug-ins/MapObject/mapobject_ui.c
* plug-ins/common/AlienMap.c
* plug-ins/common/AlienMap2.c
* plug-ins/common/CML_explorer.c
* plug-ins/common/blur.c
* plug-ins/common/curve_bend.c
* plug-ins/common/gtm.c
* plug-ins/common/illusion.c
* plug-ins/common/jigsaw.c
* plug-ins/common/plasma.c
* plug-ins/common/polar.c
* plug-ins/common/ps.c
* plug-ins/common/randomize.c
* plug-ins/common/sinus.c
* plug-ins/common/snoise.c
* plug-ins/common/sparkle.c
* plug-ins/common/uniteditor.c
* plug-ins/common/warp.c
* plug-ins/common/wind.c
* plug-ins/gap/gap_arr_dialog.c
* plug-ins/gap/gap_mov_dialog.c
* plug-ins/gap/gap_navigator_dialog.c
* plug-ins/gdyntext/gdyntext_ui.c
* plug-ins/gfig/gfig.c
* plug-ins/gflare/gflare.c
* plug-ins/gimpressionist/gimpressionist.c
* plug-ins/maze/maze_face.c
* plug-ins/print/gimp_main_window.c
* plug-ins/sel2path/sel2path.c: removed the calls to
gimp_help_init() and gimp_help_free().
Fixed bug #81017:
* libgimpbase/gimpprotocol.[ch]: added "guint8 show_tool_tips"
to the GPConfig message. Increased the protocol version number.
* app/plug-in/plug-in.c: pass the value of gui_config->show_tool_tips.
* libgimp/gimp.[ch]: added gimp_show_tool_tips() to get the value
which was passed in the GPConfig message.
* libgimp/gimpui.c (gimp_ui_init): disable the tooltips
if show_tool_tips is FALSE.
* plug-ins/MapObject/mapobject_main.[ch]
* plug-ins/MapObject/mapobject_ui.c
* plug-ins/common/jigsaw.c
* plug-ins/gap/gap_navigator_dialog.c
* plug-ins/gfig/gfig.c: removed all plug-in specific GUI for
enabling/disabling tooltips.
2002-05-16 Michael Natterer <mitch@gimp.org>
* libgimpbase/gimpprotocol.[ch]
* libgimpbase/gimpwire.[ch]: pass "gpointer user_data" to all
functions, which in gets turn passed to the registered reader,
writer, and flusher funcs.
* libgimp/gimp.c
* libgimp/gimptile.c: pass NULL as user_data. We have only one
pipe on the plug-in side.
* app/plug-in/plug-in.c: pass the PlugIn as user_data. As a
consequence, got rid of more global variables. The global
"current_plug_in" and the plug_in_push()/pop() madness are still
there. Will reeplace them by some less ugly hack later...
2002-05-16 Michael Natterer <mitch@gimp.org>
* libgimpbase/tmpl/gimpprotocol.sgml
* libgimpbase/tmpl/gimpwire.sgml: regenerated after API change.
* app/plug-in/plug-in-rc.c: implement a new pluginrc flag,
"has-init", so that only plug-ins with init functions are
initialized.
* app/plug-in/plug-in.ch
* libgimp/gimp.c
* libgimpbase/gimpprotocol.ch: send a new gimpwire message,
GP_HAS_INIT during the query stage if the plug-in needs to be
initialized. Only invoke the plug-in in init mode if the plug-in
has an init function.
2001-11-23 Sven Neumann <sven@gimp.org>
* configure.in: bumped version number to 1.3.1.
Require Glib/GTK+-1.3.11 and Pango-0.22. Removed GDK_DISABLE_COMPAT_H
and GTK_DISABLE_COMPAT_H from our default CFLAGS since they don't
exist any longer.
* RELEASE-TO-CVS.patch: removed since the glib/gtk+ API is supposed to
be frozen now.
* HACKING: removed reference to RELEASE-TO-CVS.patch
* app/gui/menus.c
* app/tools/gimptexttool.c: applied RELEASE-TO-CVS.patch to conform
to the new GTK+/Pango API.
* app/core/Makefile.am: generate marshallers with gimp_marshal prefix.
* app/core/gimpmarshal.list: added all marshallers we use.
* app/core/gimpmarshal.[ch]: regenerated.
* app/[lots of .c files]: use gimp_marshal_* for all marshallers.
* data/images/
* app/app_procs.c
* app/gui/splash.c:
* libgimpbase/Makefile.am
* libgimpbase/gimpbase.h
* libgimpbase/gimputils.[ch]: removed since they are no longer needed.
* app/gimprc.c
* plug-ins/common/ps.c
* plug-ins/gdyntext/gdyntext.c
* plug-ins/gdyntext/gdyntextcompat.c
* plug-ins/gfig/gfig.c
* plug-ins/gflare/gflare.c
* plug-ins/script-fu/script-fu-scripts.c: use glib functions instead
of gimp_strescape() and gimpstrcompress().
* cleaned up all header files: use G_BEGIN_DECLS/G_END_DECLS, declared
all _get_type function as G_GNUC_CONST.
* tools/pdbgen/enumcode.pl
* tools/pdbgen/lib.pl: make them generate header files using
G_BEGIN_DECLS/G_END_DECLS.
* pixmaps/Makefile.am
* pixmaps/wilber3.xpm: removed ...
* data/images/tips_wilber.png: ... and added here as PNG
* app/gui/tips-dialog.c: load the Wilber on demand using GdkPixbuf.
* data/images/gimp_splash.ppm: removed ...
* data/images/gimp_splash.png: ... and added as PNG
* app/app_procs.c
* app/gui/splash.[ch]: load the splash image using GdkPixbuf.
* app/gui/about-dialog.c: sink the GtkPreview.
2001-09-19 Sven Neumann <sven@gimp.org>
* configure.in: require GTK+-1.3.8 and PangoFT2-0.19.
* app/devices.c:
* app/tools/gimppainttool.c: removed intermediate hacks that are no
longer needed with the new GTK+ release.
* app/plug_in.c
* libgimp/gimp.[ch]
* libgimp/gimpui.c
* libgimpbase/gimpprotocol.[ch]: removed use_xshm and color_cube
variables and accessor functions.
* app/errors.c: use gtk_exit() instead of gdk_exit().
* app/gdisplay.c: use Pango API to determine cursor label width. This
does not work correctly, but at least it compiles...
* app/gui/splash.c: follow Pango API changes.
* app/tools/gimpcurvestool.[ch]: use PangoLayouts to draw text.
* app/tools/gimptexttool.c: follow Pango API changes.
* app/widgets/gimpfontselection-dialog.c
* app/widgets/gimpfontselection.c: mostly rewritten following the
changes in GtkFontSelection. This is unusable at the moment and
crashes, but at least it compiles again...
* plug-ins/Makefile.am: temporarily disabled build of ifscompose since
it does not compile any longer after the latest GDK cleanups.
* plug-ins/common/nlfilt.c: gimp_color_cube() is obsolete.
2001-07-15 Michael Natterer <mitch@gimp.org>
* libgimpbase/gimpwire.c: remove the usage of printf()/scanf()
when sending doubles over the wire. Instead, rely on the memory
layout of gdouble being IEEE compliant and transmit 8 bytes in
network byte order.
* libgimpbase/gimpprotocol.h: increase GP_VERSION because this
makes the wire protocol binary incompatible.
* app/main.c
* libgimp/gimp.c: removed the setlocate(LC_NUMERIC,"C") workaround.
2000-07-30 Tor Lillqvist <tml@iki.fi>
* libgimp/gimp.c
* libgimp/gimp.h
* libgimp/gimpmenu.c
* libgimp/gimpprotocol.c
* libgimp/gimpprotocol.h
* libgimp/gimp.def
* app/plug_in.c
* plug-ins/helpbrowser/helpbrowser.c
* plug-ins/script-fu/script-fu.c: As the GLib main loop and IO
channel implementation on Win32 now provides the same interface as
that on Unix, much of the Win32-only crap could be
removed. Especially, no need for "wakeup" out-of-band messages to
wake up pipe readers. No need for plug-ins to tell GIMP their
thread id.
* libgimp/gimp.c (gimp_extension_process): On Win32, use the new
g_io_channel_win32_wait_for_condition() function.
* plug-ins/makefile.cygwin: Add the homogenizer plug-in to the
unofficial part.
Michael Natterer