Add a boolean 'compress' parameter to
gimp_transform_grid_tool_push_internal_undo(). When TRUE,
successive undo steps added rapidly are compressed into a single
step.
In the various subclasses, compress undo steps for dialog changes,
since we push an undo step for every intermediate change for those
(such as while dragging a spin-scale). In contrast, we only push
tool-widget undo steps upon button release, hence there's no need
to compress them.
Implement GimpTransformGridTool::radjust(), added in the previous
commit, in various transform tools:
The unified-transform, scale, and perspective tools readjust the
transformation such that the grid is centered relative to the view,
and its handles are fully within view under arbitrary rotation.
The rotate tool readjusts the transformation such that the pivot is
centered, and the grid is unrotated, relative to the view.
Add a GimpTransformGridTool::matrix_to_info() virtual function,
which should extract the tool-specific transformation parameters
given a transformation matrix, and the old parameter set (which is
needed in some tools, to derive the parameters that aren't encoded
in the matrix, such as the pivot point). The transformation matrix
can be any combination of matrices calculated by the tool, and
their inverses. Subclasses should only implement this function if
every such matrix can be mapped back to transformation parameters.
This is currently the case for all the transform-grid tools, except
for the shear tool (since it only supports shearing along one of
the horizontal or the vertical directions, however, the combined
matrix may require shearing in both directions).
When a transform-grid tool implements this function, show a chain-
button between the two transform-direction radio-buttons in the
tool options. When the chain-button is linked, whenever the
transform corresponding to the active direction is modified, adjust
the transform corresponding to the non-active direction such that
the overall transform remains the same.
One notable workflow that this enables is transforming a layer
while adjusting a different area than its boundary, by first
defining the area while the transform-directions are linked, and
then transforming the area while the transform-directions are
unlinked.
In GimpTransformGridTool, allow performing simultaneous forward
(normal) and backward (corrective) transforms, by having each
transform direction operate on an independent set of parameters.
In other words, whereas the transform-grid tools previously had a
single transform, which could be applied either normally or
correctively using the "direction" tool-option, they now have two
independent transforms, one applied normally and the other
applied correctively, which are toggled using the "direction"
option. The overall transform is the combination of the backward
transform, followed by the forward transform.
Another way to think about it, is that the tool transforms a source
shape into a destination shape. The source shape is defined by the
backward transform, and the destination shape is defined by the
forward transform. Wherewas previously only one of these shapes
could be controlled (the other shape always being the item bounds),
it's now possible to control both shapes in a single transform.
The next commit will allow modifying both shapes simultaneously,
making this even more useful.
Note that since both transforms start off as the identity, using
only one of the transform directions has the same behavior as
before.
Add an undo_desc field to GimpTransformToolClass, which subclasses
should set to the tool's default undo description. Provide a
default implementation for the get_undo_desc() vfunc, which returns
(a copy of) undo_desc. This simplifies transform tools that have a
static undo descrption, as well as provides a fallback when a
detailed undo description can't be generated (not currently
relevant, but will be used in the next commit).
When rotating an item around its center using the rotate tool,
i.e., if the pivot point hasn't been moved, don't include the pivot
coordinates in the undo description.
Get rid of GimpTransformGridTool::recalc_matrix() and
gimp_transform_grid_tool_recalc_matrix(), and have
GimpTransformGridTool and its subclasses use
GimpTransformTool::recalc_matrix() and
gimp_transform_tool_recalc_matrix() directly instead.
In order to break the GimpToolWidget::changed/
GimpTransformTool::recalc_matrix() loop, add a
GimpTransformGridTool::update_widget() vfunc, which subclasses
should override to update their tool-widget (instead of doing this
in ::recalc_matrix()), and ::widget_changed(), which is called when
the tool-widget changes (and which subclasses should override
instead of connecting to the tool-widget's "changed" signal
directly.) GimpTransformGridTool calls these functions as
necessary, instead of relying on extra parameters passed to
recalc_matrix().
Adapt all the direct and indirect subclasses of
GimpTransformGridTool to the change.
While most of our transform tools use an interactive transform
grid, and have similar behavior, the flip tool is an odd one out.
The new "auto straighten" function of the measure tool introduces
another tool that performs transformations, while not behaving like
the rest of the transform tools.
Factor out the parts of GimpTransformTool that handle user
interaction into GimpTransformGridTool (with corresponding
GimpTransformGridOptions, and GimpTransformGridToolUndo), and only
leave the basic transform functionality and options in
GimpTransformTool (and GimpTransformOptions).
Derive all the transform tools (and transform-tool base classes)
that previously derived from GimpTransformTool, from
GimpTransformGridTool. The one exception is GimpFlipTool, which
still derives from GimpTransformTool directly. The next commit
will derive GimpMeasureTool from GimpTransformTool as well.
Simply use g_object_bind_property() to connect the grid properties of
GimpTransformOoptions and GimpToolTransformGrid and remove all other
grid property setting code.
Try to sort all GIMP_ICON_* defines into FDO categories like in
https://specifications.freedesktop.org/icon-naming-spec/latest/ar01s04.html
Add defines for all icons we override, rename some icons to their FDO
standard names, and mark the ones we duplicate with a comment so we
don't forget to rename those to standard names in 3.0.
Nobody has them anymore, and they are deprecated in GTK+ 3.x. This
also fixes all conflicting mnemonics except those I missed, but we can
fix them now.
add undo and redo buttons, can undo all interactions. The reset button
is equivalent to undoing all operations and lets you press redo to get
back to before you reset. Doing something after undo will of course
clear all redo events.
And remove all the complicated handling code entirely. This makes
GimpTransformTool a lot less complex. As a nice side effect, the
preview is now always 100% in sync with the grid and handles.
2009-04-03 Michael Natterer <mitch@gimp.org>
Bug 577575 – transform tool fills underlying extracted area wrongly
* app/tools/gimpfliptool.c
* app/tools/gimpperspectivetool.c
* app/tools/gimprotatetool.c
* app/tools/gimpscaletool.c (gimp_*_tool_register): pass
GIMP_CONTEXT_BACKGROUND_MASK to the register callback to the tools
use the global background color.
svn path=/trunk/; revision=28236
2009-01-17 Michael Natterer <mitch@gimp.org>
* all files with a GPL header and all COPYING files:
Change licence to GPLv3 (and to LGPLv3 for libgimp).
Cleaned up some copyright headers and regenerated the parsers in
the ImageMap plugin.
svn path=/trunk/; revision=27913
2008-10-09 Michael Natterer <mitch@gimp.org>
Add GEGL_CFLAGS and #includes as if gimpdrawable.h and gimpimage.h
had a GEGL dependency (they will have in the next commit, but I
wanted to keep the commit separate).
* app/dialogs/Makefile.am
* app/file/Makefile.am
* app/gui/Makefile.am
* app/menus/Makefile.am
* app/paint/Makefile.am
* app/plug-in/Makefile.am
* app/text/Makefile.am
* app/vectors/Makefile.am
* app/widgets/Makefile.am
* app/xcf/Makefile.am: add GEGL_CFLAGS.
* app/actions/*.c
* app/core/*.c
* app/dialogs/*.c
* app/display/*.c
* app/file/*.c
* app/gui/*.c
* app/menus/*.c
* app/paint/*.c
* app/pdb/gimppdb-utils.c
* app/pdb/gimpprocedure.c
* app/plug-in/*.c
* app/text/*.c
* app/tools/*.c
* app/vectors/*.c
* app/widgets/*.c
* app/xcf/*.c: add <gegl.h> or replace <glib-object.h> by <gegl.h>
to all files which include a drawable subclass or gimpimage.h
* tools/pdbgen/app.pl: include <gegl.h> instead of <glib-object.h>
in all generated files.
* app/pdb/*-cmds.c: regenerated.
* data/images/gimp-splash.png: the goat is still sleeping.
By Aurore Derriennic.
svn path=/trunk/; revision=27202
2008-05-31 Martin Nordholts <martinn@svn.gnome.org>
* app/tools/gimprotatetool.c (gimp_rotate_tool_key_press):
Implemented this function to support rotating with arrow keys. See
bug #387779.
svn path=/trunk/; revision=25873
2007-03-09 Michael Natterer <mitch@gimp.org>
* app/core/core-types.h: include "libgimpmath/gimpmathtypes.h"
instead of "libgimpmath/gimpmath.h".
* app/core/gimpbrush.h
* app/paint/gimppaintcore.h
* app/paint/gimpperspectiveclone.h
* app/text/gimptext.h
* app/tools/gimptransformtool.h: include gimpvector.h and
gimpmatrix.h explicitely where they are needed in public structs.
* app/*/*.c
* tools/pdbgen/pdb/paths.pdb: include "libgimpmath/gimpmath.h"
where needed.
* app/pdb/paths_cmds.c: regenerated.
svn path=/trunk/; revision=22084
Ell