Rather than trying to implement full i18n plural support, we just remove
this failed attempt from the past. The fact is that to get proper
support, we'd basically need to reimplement a Gettext-like plural
definition syntax within our API, then ask people to write down this
plural definition for their language, then to write every plural form…
all this for custom units which only them will ever see!
Moreover code investigation shows that the singular form was simply
never used, and the plural form was always used (whatever the actual
unit value displayed).
As for the "identifier", this was a text which was never shown anywhere
(except in the unit editor) and for all built-in units, as well as
default unitrc units, it was equivalent to the English plural value.
So we now just have a unique name which is the "long label" to be used
everywhere in the GUI, and abbreviation will be basically the "short
label". That's it. No useless (or worse, not actually usable because it
was not generic internationalization) values anymore!
This fixes all our GObject Introspection issues with GimpUnit which was
both an enum and an int-derived type of user-defined units *completing*
the enum values. GIR clearly didn't like this!
Now GimpUnit is a proper class and units are unique objects, allowing to
compare them with an identity test (i.e. `unit == gimp_unit_pixel ()`
tells us if unit is the pixel unit or not), which makes it easy to use,
just like with int, yet adding also methods, making for nicer
introspected API.
As an aside, this also fixes#10738, by having all the built-in units
retrievable even if libgimpbase had not been properly initialized with
gimp_base_init().
I haven't checked in details how GIR works to introspect, but it looks
like it loads the library to inspect and runs functions, hence
triggering some CRITICALS because virtual methods (supposed to be
initialized with gimp_base_init() run by libgimp) are not set. This new
code won't trigger any critical because the vtable method are now not
necessary, at least for all built-in units.
Note that GimpUnit is still in libgimpbase. It could have been moved to
libgimp in order to avoid any virtual method table (since we need to
keep core and libgimp side's units in sync, PDB is required), but too
many libgimpwidgets widgets were already using GimpUnit. And technically
most of GimpUnit logic doesn't require PDB (only the creation/sync
part). This is one of the reasons why user-created GimpUnit list is
handled and stored differently from other types of objects.
Globally this simplifies the code a lot too and we don't need separate
implementations of various utils for core and libgimp, which means less
prone to errors.
With the new API introduced int d1c4457f,
we next need to port all plug-ins using
the argument macros to functions.
This will allow us to remove the macros
as part of the 3.0 API clean-up.
When closing the Page Setup dialog we had warnings and criticals in
the terminal.
The cause for this was that we were looking for the temp procedure
to notify the print plug-in. However, this temp procedure is only
installed if the print plug-in is running, not when running the
Page Setup directly, in which case it is not needed.
We now check if the procedure is valid (meaning the print plug-in is
running) before calling the temp notify procedure.
If we leave a space between the macro name and opening parenthese for argument
lists, the args are not considered macro args (which will be discovered when
using it). I experienced this issue while testing code on some plug-in
yesterday, so thought I might as well fix all these broken macros for casting to
the specific GimpPlugIn subclass, so that we won't have a next time.
The gimp_procedure_run() already existed, though it was with an ordered
GimpValueArray array of arguments. Its usage feels redundant to the series of
gimp_pdb_run_procedure*() functions (which is confusing), but
gimp_procedure_run() was actually a bit more generic, because it does not
necessarily calls GimpProcedure-s through the PDB! For instance, it can runs a
local GimpProcedure, such as the case of one procedure which would want to call
another procedure in the same plug-in, but without having to go through PDB. Of
course, for local code, you may as well run relevant functions directly, yet it
makes sense that if one of the redundant-looking function is removed, it should
be the more specific one. Also gimp_procedure_run() feels a lot simpler and
logical, API wise.
A main difference in usage is that now, plug-in developers have to first
explicitly look up the GimpPdbProcedure with gimp_pdb_lookup_procedure() when
they wish to call PDB procedures on the wire. This was done anyway in the
gimp_pdb_run_procedure*() code, now it's explicit (rather than calling by name
directly).
Concretely:
* gimp_pdb_run_procedure(), gimp_pdb_run_procedure_config() and
gimp_pdb_run_procedure_valist() are removed.
* gimp_procedure_run() API is modified to use a variable args list instead of a
GimpValueArray.
* gimp_procedure_run_config() and gimp_procedure_run_valist() are added.
* gimp_procedure_run_config() in particular will be the one used in bindings
which don't have variable args support through a (rename-to
gimp_procedure_run) annotation.
Passing (name, type, value) triplets is actually useless because we can get the
type information from the procedure/config anyway. That only adds one more
verification to do. Let's just change the function so that we pass (name, value)
couples instead, pretty much like in `g_object_set()`.
As far as plug-in API is concerned, at least the calling API, order of arguments
when calling PDB procedures doesn't matter anymore.
Order still matters for creating procedures with standard arguments (for
instance, "run-mode" is first, then image, or file, drawables or whatnot,
depending on the subtype of procedure), but not for calling with libgimp.
Concretely in this commit:
- gimp_pdb_run_procedure_argv() was removed as it's intrinsically order-based.
- gimp_pdb_run_procedure() and gimp_pdb_run_procedure_valist() stay but their
semantic changes. Instead of an ordered list of (type, value) couple, it's now
an unordered list of (name, type, value) triplets. This way, you can also
ignore as many args as you want if you intend to keep them default. For
instance, say you have a procedure with 20 args and you only want to change
the last one and keep the 19 first with default values: while you used to have
to write down all 20 args annoyingly, now you can just list the only arg you
care about.
There are 2 important consequences here:
1. Calling PDB procedures becomes much more semantic, which means scripts with
PDB calls are simpler (smaller list of arguments) and easier to read (when
you had 5 int arguments in a row, you couldn't know what they refer to,
except by always checking the PDB source; now you'll have associated names,
such as "width", "height" and so on) hence maintain.
2. We will have the ability to add arguments and even order the new arguments in
middle of existing arguments without breaking compatibility. The only thing
which will matter will be that default values of new arguments will have to
behave like when the arg didn't exist. This way, existing scripts will not be
broken. This will avoid us having to always create variants of PDB procedure
(like original "file-bla-save", then variant "file-bla-save-2" and so on)
each time we add arguments.
Note: gimp_pdb_run_procedure_array() was not removed yet because it's currently
used by the PDB. To be followed.
This removes a bunch of inconsistencies we had from the before-2.99.16 version
because new items from plug-ins were all added at the bottom of their respective
submenu.
GLib has a specific type for byte arrays: `GBytes` (and it's underlying
GType `G_TYPE_BYTES`).
By using this type, we can avoid having a `GimpUint8Array` which is a
bit cumbersome to use for both the C API, as well as bindings. By using
`GBytes`, we allow other languages to pass on byte arrays as they are
used to, while the bindings will make sure to do the right thing.
In the end, it makes the API a little bit simpler for everyone, and
reduces confusion for people who are used to working with byte arrays
in other C/GLib based code (and not having 2 different types to denote
the same thing).
Related: https://gitlab.gnome.org/GNOME/gimp/-/issues/5919
In 2.10, print_temp_proc_name () took in the image id. When it was
updated to take in GimpImage, it still assumed the g_strdup_printf
parameter was an integer.
This is fixed by calling `gimp_image_get_id ()` on the image parameter.
Now that we bumped our meson requirement, meson is complaining about
several features now deprecated even in the minimum required meson
version:
s/meson.source_root/meson.project_source_root/ to fix:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.56.0': meson.source_root. use meson.project_source_root() or meson.global_source_root() instead.
s/meson.build_root/meson.project_build_root/ to fix:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
Fixing using path() on xdg_email and python ExternalProgram variables:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
s/get_pkgconfig_variable *(\([^)]*\))/get_variable(pkgconfig: \1)/ to
fix:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.56.0': dependency.get_pkgconfig_variable. use dependency.get_variable(pkgconfig : ...) instead
This is the consequence of previous commit. Plug-ins' label and
documentation are now localized before sending these data to GIMP core.
In other words, we replace N_() macros with basic gettext calls.
Hence avoiding the stderr messages. These are going to be localized with
centrally installed catalogs "gimp*-std-plugins", "gimp*-script-fu" and
"gimp*-python".
We now handle core plug-in localizations differently and in particular,
with kind of a reverse logic:
- We don't consider "gimp*-std-plugins" to be the default catalog
anymore. It made sense in the old world where we would consider the
core plug-ins to be the most important and numerous ones. But we want
to push a world where people are even more encouraged to develop their
own plug-ins. These won't use the standard catalog anymore (because
there are nearly no reasons that the strings are the same, it's only a
confusing logic). So let's explicitly set the standard catalogs with
DEFINE_STD_SET_I18N macro (which maps to a different catalog for
script-fu plug-ins).
- Doing something similar for Python plug-ins which have again their own
catalog.
- Getting rid of the INIT_I18N macro since now all the locale domain
binding is done automatically by libgimp when using the set_i18n()
method infrastructure.
This was a long standing issue where the image was not printed at the
position as selected in our print preview.
The problem being that we do not take into account the dpi of the print
context we are printing to, but instead always assumed 72.
This is the fix that was suggested by Massimo.
As mentioned by Massimo in issue #6618, part of the problem there is an
integer overflow when using large size images when computing the offset
in pixels.
Let's fix our part of the problem by casting to guint64.
Besides that, also use casts to correctly compute progress for very
large images.
The gimp_drawable_type() is an issue though as gimp_drawable_get_type()
is already defined as a common GObject API.
Though I'm actually wondering if GimpImageType is well called. Rather
than Type, shouldn't we go with ColorModel?
sed -i 's/\<gimp_drawable_bpp\>/gimp_drawable_get_bpp/g' "$@"
sed -i 's/\<gimp_drawable_width\>/gimp_drawable_get_width/g' "$@"
sed -i 's/\<gimp_drawable_height\>/gimp_drawable_get_height/g' "$@"
sed -i 's/\<gimp_drawable_offsets\>/gimp_drawable_get_offsets/g' "$@"
Similarly to the previous commit, it is not only about using the new
API. I also make sure we do not assume that parasite data is
nul-terminated. In many places, we were just assuming so because these
were supposed to be parasite our code set. Yet these are data input
contained in files which can be wrong for any reason (corrupted file,
bugs, other scripts/plug-ins editing these parasites…). So instead of
assuming string parasites are always correctly formatted, I make sure
they are nul-terminated by passing them through g_strndup() when
necessary.
This gives a big cleanup in the meson.build files of the plug-ins.
It's also quite a bit more maintainable, since anything that changes in
libgimp's dependencies, linkage, ... doesn't have to be copy-pasted into
each plug-in.
I am going to forbid plug-ins from being installed directly in the root
of the plug-ins/ directory. They will have to be installed in a
subdirectory named the same as the entry point binary.
This may seem useless for our core plug-ins which are nearly all
self-contained in single binaries, but this is actually a necessary
restriction to eliminate totally the DLL hell issue on Windows. Moving
core plug-ins in subfolders is only a necessary consequence for it.
Jehan