- Change the wire protocol's GPProcInstall to transmit the entire
information needed for constructing all GParamSpecs we use, don't
use GimpPDBArgType in GPProcInstall but an enum private to the wire
protocol plus the GParamSpec's GType name. Bump the wire protocol
version.
- Add gimpgpparamspecs.[ch] in both app/plug-in/ and libgimp/ which
take care of converting between GPParamDef and GParamSpec. They
share code as far as possible.
- Change pluginrc writing and parsing to re-use GPParamDef and the
utility functions from gimpgpparamspecs.
- Remove gimp_pdb_compat_param_spec() from app/pdb/gimp-pdb-compat.[ch],
the entire core uses proper GParamSpecs from the wire protocol now,
the whole file will follow down the drain once we use a GValue
representation on the wire too.
- In gimp_plug_in_handle_proc_install(), change the "run-mode"
parameter to a GParamSpecEnum(GIMP_TYPE_RUN_MODE) (if it is not
already an enum). and change all places in app/ to treat it as an
enum value.
- plug-ins: fix cml-explorer to register correctly, a typo in
"run-mode" was never noticed until now.
- Add gimpgpcompat.[ch] in libgimp to deal with all the transforms
between old-style wire communication and using GParamSpec and
GValue, it contains some functions that are subject to change or
even removal in the next steps.
- Change the libgimp GimpProcedure and GimpPlugIn in many ways to be
able to actually install procedures the new way.
- plug-ins: change goat-exercise to completely use the new GimpPlugIn
and GimpProcedure API, look here to see how plug-ins will look in
the future, of course subject to change until this is finished.
- Next: changing GPParam to transmit all information about a GValue.
Commits e70c08cdd0 from mitch and mine
(5335f313d9) clashed as we did the same
fix nearly the same time on both branches. Let's at least sync so that
the code is exactly the same (just to avoid potential merge conflicts in
the future).
The scratch allocator has been moved to GEGL (commit
gegl@b99032d799dda3436ffa8c1cc28f8b0d34fb965d). Remove gimp-
scratch, and replace all its uses with gegl-scratch.
This is still needed on the gimp-2-10 branch since the implementation
appeared on GTK+ 2.24.25. But for GTK+3, it appeared for 3.14.0, which
is below our current minimum requirement on master. So let' clean out
this now useless piece of code.
All babl formats now have a space equivalent to a color profile,
determining the format's primaries and TRCs. This commit makes GIMP
aware of this.
libgimp:
- enum GimpPrecision: rename GAMMA values to NON_LINEAR and keep GAMMA
as deprecated aliases, add PERCEPTUAL values so we now have LINEAR,
NON_LINEAR and PERCPTUAL for each encoding, matching the babl
encoding variants RGB, R'G'B' and R~G~B~.
- gimp_color_transform_can_gegl_copy() now returns TRUE if both
profiles can return a babl space, increasing the amount of fast babl
color conversions significantly.
- TODO: no solution yet for getting libgimp drawable proxy buffers in
the right format with space.
plug-ins:
- follow the GimpPrecision change.
- TODO: everything else unchanged and partly broken or sub-optimal,
like setting a new image's color profile too late.
app:
- add enum GimpTRCType { LINEAR, NON_LINEAR, PERCEPTUAL } as
replacement for all "linear" booleans.
- change gimp-babl functions to take babl spaces and GimpTRCType
parameters and support all sorts of new perceptual ~ formats.
- a lot of places changed in the early days of goat invasion didn't
take advantage of gimp-babl utility functions and constructed
formats manually. They all needed revisiting and many now use much
simpler code calling gimp-babl API.
- change gimp_babl_format_get_color_profile() to really extract a
newly allocated color profile from the format, and add
gimp_babl_get_builtin_color_profile() which does the same as
gimp_babl_format_get_color_profile() did before. Visited all callers
to decide whether they are looking for the format's actual profile,
or for one of the builtin profiles, simplifying code that only needs
builtin profiles.
- drawables have a new get_space_api(), get_linear() is now get_trc().
- images now have a "layer space" and an API to get it,
gimp_image_get_layer_format() returns formats in that space.
- an image's layer space is created from the image's color profile,
change gimpimage-color-profile to deal with that correctly
- change many babl_format() calls to babl_format_with_space() and take
the space from passed formats or drawables
- add function gimp_layer_fix_format_space() which replaces the
layer's buffer with one that has the image's layer format, but
doesn't change pixel values
- use gimp_layer_fix_format_space() to make sure layers loaded from
XCF and created by plug-ins have the right space when added to the
image, because it's impossible to always assign the right space upon
layer creation
- "assign color profile" and "discard color profile" now require use
of gimp_layer_fix_format_space() too because the profile is now
embedded in all formats via the space. Add
gimp_image_assign_color_profile() which does all that and call it
instead of a simple gimp_image_set_color_profile(), also from the
PDB set-color-profile functions, which are essentially "assign" and
"discard" calls.
- generally, make sure a new image's color profile is set before
adding layers to it, gimp_image_set_color_profile() is more than
before considered know-what-you-are-doing API.
- take special precaution in all places that call
gimp_drawable_convert_type(), we now must pass a new_profile from
all callers that convert layers within the same image (such as
image_convert_type, image_convert_precision), because the layer's
new space can't be determined from the image's layer format during
the call.
- change all "linear" properties to "trc", in all config objects like
for levels and curves, in the histogram, in the widgets. This results
in some GUI that now has three choices instead of two.
TODO: we might want to reduce that back to two later.
- keep "linear" boolean properties around as compat if needed for file
pasring, but always convert the parsed parsed boolean to
GimpTRCType.
- TODO: the image's "enable color management" switch is currently
broken, will fix that in another commit.
Not sure this is really solving the issue reported, which is that
`g_get_tmp_dir()` uses environment variables (yet as g_file_open_tmp()
uses g_get_tmp_dir()…). But at least g_file_open_tmp() should create
unique temporary files, which prevents overriding existing files (which
is most likely the only real attack possible here, or at least the only
one I can think of unless some weird vulnerabilities exist in glib).
- set GIMP3_DIRECTORY env variable not GIMP2_DIRECTORY
- make sure the cursors resource gets compiled in
- remove tab autosizing test, that code is gone
This reverts commit 554347e0ff.
For some weird reason, this fixed the `make check` but broke the `make
distcheck`. I am lost. Better revert, and now distcheck works great.
I'm not sure how useful is this test if we have to just constantly tweak
the sessionrc for it to pass. But well… here it is.
Now make check fully passes.
Repalce the two separate size entries, used for the position and
size properties of GimpRectangleOptions, with a single size entry
with two fields, so that they accept ratio expressions. Note that
this doesn't change the UI.
Commit 3635cf04ab moved the special
handling of bottom-layer compositing to GimpOperationLayerMode.
This required giving the op more control over the process()
function of its subclasses. As a temporary workaround, the commit
bypassed the subclasses entirely, using "gimp:layer-mode" for all
modes. This is the reckoning :)
Add a process() virtual function to GimpOperationLayerMode, which
its subclasses should override instead of
GeglOperationPointComposer3's process() functions. Reinstate the
subclasses (by returning the correct op in
gimp_layer_mode_get_oepration()), and have them override this
function.
Improve the way gimp_operation_layer_mode_process() dispatches to
the actual process function, to slightly lower its overhead and
fix some thread-safety issues.
Remove the "function" field of the layer-mode info array, and have
gimp_layer_mode_get_function() return the
GimpOperationLayerMode::process() function of the corresponding
op's class (caching the result, to keep it cheap.) This reduces
redundancy, allows us to make the ops' process() functions private,
and simplifies SSE dispatching (only used by NORMAL mode,
currently.)
Move the blend and composite functions of the non-specialized
layer modes to gimpoperationlayermode-{blend,composite}.[hc],
respectively, to improve code organization.
Move the SSE2 composite functions to a separate file, so that they
can be built as part of libapplayermodes_sse2, allowing
libapplayermodes to be built without SSE2 compiler flags. This
allows building GIMP with SSE acceleration enabled, while running
the resulting binary on a target with no SSE accelration.
Add a "blend_function" field to the layer-mode info array, and use
it to specify the blend function for the non-specialized modes.
This replaces the separate switch() statement that we used
previously.
Remove the "affected_region" field of the layer-mode info array.
We don't need it anymore, since we can go back to using
GimpOperationLayerMode's virtual get_affected_region() function.
Last but not least, a bunch of code cleanups and consistency
adjustments.
Michael Natterer