Don't flush the source pickable in gimp_source_core_motion(), as
this introduces a race condition between the paint thread and the
display-update timeout, when the source pickable is the image
containing the target drawable.
Flushing the source pickable shouldn't be currently necessary, and
either way, should happen during initialization.
Most expected behavior in normal transform is to see the preview,
whereas you usually don't want to see it in corrective mode. In 2.8
actually, it seems like it was not even possible to see the image
preview in corrective mode.
So let's set "show-preview" to these defaults when "direction" property
is updated. It is still possible to change it manually for any specific
use cases (i.e. you can hide the preview in normal transform, and
oppositely you can show it in corrective transform), but at least now
defaults are sane.
... or during rotation.
If checked before rotation, it works as expected, i.e. one sees only the
original or the rotated image.
While rotation is in progress: if unchecked, one sees neither the
original nor the image preview; if checked, one sees both original and
rotated preview.
Let's make the behavior consistent and only show exactly one version at
all time.
Invert zoom adjustment using the mouse or the keyboard when in
inverse mode. Take zoom factor into account when panning using the
keyboard. Fix motion cancelation.
... edges for MyPaint brush.
Adding the concept of "stateful" symmetry when a tool needs to make sure
of corresponding stroke numbers and orders while painting (i.e. stroke N
at time T+1 is the continuation of stroke N at time T). This is the case
for the MyPaint brushes and the ink tool.
I was hoping others would review this <release> text before submitting
it to translators, but no such luck there. Anyway let's uncomment now
because translators need to get the text sooner than later if we want as
many localized version of the appdata text as possible at release.
Everyone if you want to review the English and the contents of this tag,
do it now!
GimpToolGyroscope is a tool widget providing canvas interaction for
3D rotation. The widget doesn't preset a UI, but rather
facilitates panning, rotation, and zoom, by dragging the canvas, or
using the keyboard.
Rotation is expressed using yaw/pitch/roll angles (performed in
this order). A zoom factor can be specified, which affects the
magnitude of the rotation per distance traveled. The widget can
operate in inverse mode, performing an inverse transformation.
Since commit bb52431cdd, we get multi-thread traces in functions
gimp_stack_trace_*(). Adding now the LLDB equivalent improvement.
Also adding the process and thread id information, from which the trace
order was made, atop the listing, as well as the thread list. This would
allow to easily find and associate the threads.
The problem is that sometimes the thread where we got a trace from may
not matter (for instance signals, even such as SIGABRT or SIGSEGV, seem
to sent a bit randomly to either the thread which provoked them or the
main thread; there is a bit of contradictory info on this when reading
on the topic, in my case I experienced this), in such case, getting all
thread stack is important to find the origin of the signal.
Other times it will highly matter, in particular when getting a trace
for a WARNING or CRITICAL. This information will help to discriminate
between thread traces.
Since commit 9c8a8ae576, we don't run gimp_quit(), which properly quits
the plug-in executable, to make sure that GIMP gets the information that
it crashed. Instead quit with `exit (EXIT_FAILURE)`.
Make sure a channel -> selection -> channel roundtrip never does any
gamma conversion.
In gimp_channel_duplicate(), make sure a created channel has the
right format, and the right data. Fixes selection -> channel.
When switching off quick mask, call gimp_item_to_selection() instead
if gimp_selection_load(), the latter was implementing a shortcut which
is now wrong.
Remove gimp_selection_load() which is now unused.
Unrelated: also remove gimp_selection_save(), it was an obvious
3-liner used only twice.
In GimpPaintTool, brush outline generation took place during
gimp_paint_tool_draw() even while painting. This function is run
concurrently with the paint thread. When using dynamics, this
introduced a race conidition between updating the brush mask in the
paint thread, and updating the brush boundary in the main thread.
Move brush outline generation during painting to
gimppainttool-paint.c, and perform it in the display-update
timeout, while the main thread and the paint thread are
synchronized.
After last commit, all paint tools work correctly with a separate
paint thread, so we can remove the option for specific paint tools
to opt out. Particularly, GimpMybrushTool now uses a separate
paint thread too.
Note that the separate paint thread can still be disabled through
the GIMP_NO_PAINT_THREAD environment variable.
Reorganize/clean up gimppainttool-paint. In particular, move all
paint-core interaction during painting to gimppainttool-paint.c, so
that we can have more control over what's going on; specifically,
enter the drawable into paint mode *before* starting the paint
core, so that it picks up the correct buffer. This fixes painting
with the paint thread using GimpApplicator, and enables us to use
the paint thread with GimpMybrushTool.
This function is unsafe during signal handling. And in any case, when
printing to stderr, I don't think we need to convert to UTF-8. Quite the
contrary, the system encoding may be more appropriate.
One additional fix for the gimp-channel-combine-masks procedure,
it needs both the combined *and* combined-to buffer in
gimp_gegl_mask_combine_buffer() to be treated specially.
Storing selections and layer masks as linear grayscale, but channels
as whatever-the-layers-are caused severe problems in images with
gamma-corrected layers: when combining channels with the selection,
they would go thorugh a gamma conversion before being combined, giving
unexpected results.
This commit changes all channels to always be linear, except in 8-bit
images, where they continue to be "Y' u8", for compatibility with old
XCF files, and because linear 8-bit can't really be used in
compositing (channels can be visible too).
To fix channel -> selection combinations also for these images, add a
small hack to gimp_gegl_mask_combine_buffer() which makes sure the
to-be-combined channel's pixels are always read as-is, without any
gamma conversion. After changing channels to linear, this makes no
difference except in the 8-bit images where we need this hack.
Add gimppainttool-paint.[ch], which takes care of painting during
motion events in GimpPaintTool. Perform the actual painting in a
separate thread, so that display updates, which can have a
significant synchronization overhead, don't stall painting.
Allow specific paint tools to opt-out of a separate paint thread,
and avoid it in GimpMybrushTool, since it doesn't seem to work.
The separate paint thread can be explicitly disabled by setting the
GIMP_NO_PAINT_THREAD environment variable.
gimp_drawable_start/end_paint() are used to enter/exit paint mode
for a given drawable. While the drawable is in paint mode,
gimp_drawable_get_buffer() returns a copy of the real drawable's
buffer, referred to as the paint buffer, so that modifications to
the returned buffer don't immediately affect the projection, and
calls to gimp_drawable_update() queue the updated region, instead
of emitting an "update" signal.
gimp_drawable_flush_paint() can be called while the drawable is in
paint mode, in order to copy the updated region of the paint buffer
back to the drawable's real buffer, and to emit "update" signals
for the queued region.
We use these functions in the next commit, to move painting to a
separate thread in the paint tools.
Align rectangles added to the display paint area, in
gimp_display_paint_area(), to a coarse grid, to reduce the
complexity of ther overall area. This is similar to commit
49285463e6, however the alignment
happens in display space, instead of image space.
Last commit caused -xobjective-c to be passed during linking on
Mac, causing object files to be treated as source files. Add a
-xnone flag to AM_LDFLAGS, canceling the effect of -xobjective-c.
Additinally, add a -xobjective-c++ flag to AM_CXXFLAGS, so that we
can use Objective-C in C++ files on Mac, if we ever need to.
On Mac, pass -xobjective-c to the compiler through AM_CFLAGS, not
AM_CPPFLAGS, so that it's only used for C sources, and not C++
sources. In the latter case, it clashes with the -std=... flag,
spewing an error. Thanks, Partha :)
Alexandre Prokoudine