- Fix "no icons" errors generating loaders.cache with .cmd (CI-Cross).
! This is a sub-optimal fix, but it's better than a useless build.
- Fix "no interpreter" errors generating .interp with Meson (CI-Native)
and generating .interp and copying .typelib with .cmd (Local-Native).
! This is a sub-optimal fix to Local-Native, but plug-ins will work.
- Fix "no iso" error copying iso_639.xml with Meson (Local-Native).
The Inno installer scripts contents (only 3 files: files, gimp3264 and
32on64) and filenames have been organized, making them much easier to
read, and slightly less hardcoded so less prone to being misunderstood
and pervasively receiving packaging stuff.
Just to be clear, one more time: the Inno installer (or future MSIX)
scripts never should be the center of attention. This "installcentrism"
caused a domino effect of partially "abandoning" the packaging, build.sh
and the meson scripts, which explains the existence of this MR...
(Some things still hardcoded since wildcards in Inno are very limited.
Also, the rational ordering principles of this MR were not applied since
these scripts are heavily based on the x86 .zip package and changing the
order of things here, according to my tests, breaks things quite easily)
The CI crossbuild job now use the same main script (and the same
sub-scripts of linking and debug generation) of the native CI for
packaging. These unified scripts greatly facilitates maintenance.
The crossbuild deps script is now more consistent in relation to the
native one. As this is polished, the cross one is now polished too.
A crossroad gimp build script was created with a more clear code.
Also, finally make the script for packaging only, removing build step
stuff that shoudn't be here (glib-schemas generation) since this causes
disparity with the Local native build; and adding some packaging
decisions that shoudn't be in the installer scripts (eg. specific
folders of ghostscript, glib; no share/themes), which also facillitates
INNO (and future MSIX) maintenance.
The local builds now can use the same script of CI for sake of time.
The compatibility layer is very simple and makes the script more
used/tested, therefore more reliable.
The local builds now can use the same script of CI for sake of time.
The compatibility layer is very simple and makes the script more
used/tested, therefore more reliable.
Also, remove some redundacy on the code for better maintenance.
Now, we have only ONE list applicable for build-deps-crossroad.sh,
build-gimp-msys2.sh and package-gimp-msys2.sh, instead of hardcoding
3 times. This unified list greatly facilitates maintenance.
Debian changes:
- Since autotools has gone, we don't need to specify 'meson' in the
debian job and others.
- The "INSTALL_PREFIX" was renamed for the more usual "GIMP_PREFIX" and
the meson sintax of Debian jobs was also updated.
Windows changes:
- Then, clarify that the win64-nightly and win32-nightly jobs are, in
fact, in the 'packaging' step, since we don't really "distribute" GIMP
in .zip and the commands are almost the same of the packaging .SH
script, without scripted optimizations for Inno Installer (or future
.MSIX), crucial for distribution.
- We don't need to specify "native" sufix in any build since they are
the rule and cross builds are the exception.
General changes:
- The job names was changed to be more consistent and in accordance
with the folders present in the artifacts.
- The 'nightly' sufix was removed from the Inno Windows Installer job
and others, since this doesn't reflect the real build frequency.
- The scripts filenames are altered to stay "in order". This is not
essential but ultra convenient since it is easy to view and search.
(The -uni suffix is explained in a further commit)
- All artifacts names now have the commit to avoid apparently duplicate
files when downloading same step artifacts from different projects.
- Finally, rearrange the order of jobs rationally: first the OSes and
archs (from the most free and modern to the most closed and legacy),
then the stages (from 'prepare' to 'analysis'), ending with the
frequency of jobs (from the most frequent, called at each push, to
the least/weekly).
Overall, this changes, although difficult to review at the first
sight, will avoid in the future quite "dumb" issues like:
GNOME/gimp#10195
This is in part a port of commit 6f921b27bb from gimp-2-10 branch, except that I
could not easily cherry-pick because too much had changed already in the master
branch.
There are also a bunch of additional changes in some other glue scripts.
Also some rules which were in the 2.10 branch don't apply to the main one, such
as Python being copied from the x86 binaries, since clang-aarch64 has Python3
(unlike Python2).
See discussion in #9170 and !1091. It looks like this soon won't be a problem
with a recent llvm-windres (which is now patched). But until then, let's patch
upstream GIMP but only for this build.
Note: the additional `rm` call was done for this error:
> + mv _install-arm64 /home/SYSTEM
> mv: cannot move '_install-arm64' to '/home/SYSTEM/_install-arm64': Directory not empty
I guess the home directory is not properly wiped-out between runs, which is not
a huge problem as long as the runner is private to our project. Let's clean
things ourselves.
This localization was added recently but it was not in the installer scripts.
Discovered with unit testing: meson test gimp:build / windows-installer-langs
Organizing sub-dependencies into modules helps. Later if for instance we need to
remove or change OpenEXR, we know that they are related and that Imath can be
removed if we remove OpenEXR.
See: https://gitlab.gnome.org/GNOME/gimp/-/issues/9653#note_1780587
Looking at MSYS2 logs, it looks like they very recently "fixed" the search paths
for lua files, which in turn broke our workaround (searching in subdirectories
of bin/ instead of share/ and lib/).
This should work better (though untested) with the workaround removed now.
Commit on luajit package at MSYS2:
703c7bae2f
The creation of the BMP welcome images for the Windows installer (part of
-Dwindows-installer=true build option) fails in the Windows job. After much
debugging, I could run GIMP, yet it was not enough. One of my hypothesis so far
is that the environment variables for DLLs won't work, since all the DLLs must
be in the same directory as the main binary (though with the WSL thing, I am
unsure, maybe it is still supposed to work), which only happens once GIMP is
installed. So GIMP runs successfully but not plug-ins.
Anyway I wasted too much time working on this and without a local Windows, it
just takes too long (mostly testing thanks to the CI) and is frustrating. Let's
just move to building both the localization files and the images on the main
Debian job (gimp-meson-debian), then use these as dependencies of the
win-installer-nightly job, i.e. when building the installer.
The common order logic for list of directories in environment variables is that
left paths have precedence. This is at least the case for LD_LIBRARY_PATH (and
probably GI_TYPELIB_PATH too).
Make sure that our local libraries and introspected binaries (in the build
directory) are used and not any version installed on the system or by previous
`ninja install` calls.
This was a first attempt at fixing this error on the CI:
> Cannot open display:
Though it was not enough (see next commit calling plug-ins as non-interactive
when called without interface), it is still a useful change overall.
… being installed.
There is already most of the main code logic for this, though now plug-ins need
to be in their own subdirectories, which breaks for plug-ins/common/ and
plug-ins/python/, while I needed plug-ins in both these categories to generate
the Windows installer welcome images (file-png, and python-fu-eval in
particular).
Once again, meson was not very helpful, since all its functions still refuse to
output generated files in subdirectories, so I end up duplicating plug-in files
with a custom Python script.
This should fix the CI. It was working on my machine as GIMP was installed, but
such a build rule should work even without GIMP installed.
This will also be useful in the future when we'll want to run unit tests of
plug-ins through the finale GIMP binary itself.
After discussion with Jernej, InnoSetup should now work better with rescaling
a big image properly to the window size, yet the ratio should still matter.
Apparently the welcome image is a hack and this is why it requires specific
ratio images. We don't use the big size yet, but since Jernej told me which
dimensions are expected, I already added the code for it to make it easier
later.
So anyway this code would allow us not to have to commit welcome images each
time, which are basically resized copy in BMP of the splash screen, slowly yet
surely filling up our repository with image duplicates.
After all, we develop a scriptable image editor! We should use it to edit images
and export in expected formats!
I only use this script for the devel installer for now, for testing and see how
it goes.
While some packages may be needed only when building (and others only when
packaging), we should probably have a shared list of packages needed for both
steps so that we avoid discrepancies which lead to missing libraries in our
installer.
See: https://gitlab.gnome.org/GNOME/gimp/-/issues/9653#note_1777596
Don't set both a branch and a commit, otherwise flatpak-builder will
compare the HEAD of this branch (which may evolve with the commit).
Fixes:
> Failed to download sources: module qoi: Git commit for branch master is dfc056e813c98d307238d35f7f041a725d699dfc, but expected f6dffaf1e8170cdd79945a4fb60f6403e447e020
Because of this, the script was failing to get the version string, which
in turn was breaking InnoSetup.
This fixes the following InnoSetup bug:
> Error on line 116 in C:\_r\_builds\k3_3muaB\0\GNOME\gimp\build\windows\installer\gimp3264.iss: Value of [Setup] section directive "VersionInfoVersion" is invalid.
… for Windows.
Though it's useless for actually building the GIR files, we still need
this package now, for building script-fu with introspection abilities,
to generate GIMP and GEGL enums.
See the 2 previous commits for more information.
Switch to NASA-maintained cfitsio library for loading/exporting FITS images.
This allows us to import compressed FITS files (GZIP, HCOMP, PLIO, RICE) in
8/16/32 bit and float/double precision. It also simplifies export code using
the built-in cfitsio APIs.
It is actually available in the SDK but was removed from the runtime (relatively
recently, it would seem). As a more general rule, it seems that GNOME is phasing
it out slowly in favor of libappstream. So probably we should do the same
eventually.
Yet for now, to at least have a working nightly flatpak, let's add it to our
package.
I'm actually syncing with a branch which I can't test right now because flathub
seem to have some breakage. For the nightly, let's just directly push as anyway
we can't test in Gitlab MRs either because of the non-master jobs timeout.
See: https://github.com/flathub/org.gimp.GIMP/pull/202
We should always keep the diff between these files to a minimum.
- Fix the markdown styling.
- Add commands on how to build GIMP from the local repository instead of a brand
new clone (otherwise I don't see how one could develop with flatpak). I knew
it were possible, but until today, I never tried to do this so I had to test
first.
- The cron file was from the very early flatpak experiments before Flathub came
into the picture, as well as the GNOME Nightly repository. Back then, we
wanted to set up our own nightlies or release repository through a cron.
- It is still interesting to keep some instructions for local builds of the
flatpak as some people want to use this for development (but all the part
about exporting to a repository, signing, etc. is now unneeded for such use
case). So I'm updating the howto to more current recommendations.
- `flatpak-howto.txt` renamed to `README.md`.
Only the libwmf patches are still different. Apparently we may have fixed the
same bugs in different way on both branches. We should look later in details to
see if some patches are better than the other.
It's probably unneeded as the 2.99 installers are transient and anything
installed by GIMP 2.99 won't be in stable 3.0 anymore. Still, it's nice not to
have any weird warnings even in dev releases.
Now that we bumped our meson requirement, meson is complaining about
several features now deprecated even in the minimum required meson
version:
s/meson.source_root/meson.project_source_root/ to fix:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.56.0': meson.source_root. use meson.project_source_root() or meson.global_source_root() instead.
s/meson.build_root/meson.project_build_root/ to fix:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.56.0': meson.build_root. use meson.project_build_root() or meson.global_build_root() instead.
Fixing using path() on xdg_email and python ExternalProgram variables:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.55.0': ExternalProgram.path. use ExternalProgram.full_path() instead
s/get_pkgconfig_variable *(\([^)]*\))/get_variable(pkgconfig: \1)/ to
fix:
> WARNING: Project targets '>=0.56.0' but uses feature deprecated since '0.56.0': dependency.get_pkgconfig_variable. use dependency.get_variable(pkgconfig : ...) instead
… Windows installer localization.
There are kind of 2 separate bugs here:
- Direct i18n.gettext() to the proper data directory where to find the
ITS file. Otherwise `meson compile gimp30-windows-installer-pot` and
`meson compile gimp30-windows-installer-update-po` complained about
not knowing XML and falling back to C, which is obviously a problem:
> /usr/bin/xgettext: warning: file 'build/windows/installer/lang/setup.isl.xml.in' extension 'xml' is unknown; will try C
- Set gt:escapeRule to "no" in the ITS file, otherwise the XML entity is
kept as-is in the po file (i.e. "&" stays "&" inside the po
files), but it's considered as raw text when merged back to XML, i.e.
that the '&' is properly converted to a XML entity, so we end up with
a double escape "&".
Now the po file will have a '&' which will still be converted to XML
entity at merge time. This is actually most likely better than asking
translators to handle XML entities themselves (with the possibility to
make typos and break the XML entity).
See https://savannah.gnu.org/bugs/?58643
The Hungarian language file for the Windows installer was recently moved
from unofficial to the officially supported languages. However, a new
release including Hungarian by default is not available yet. This causes
our CI to fail because it can't find Hungarian in unofficial.
We change our ci script to download Hungarian from the correct location
for official languages, and adapt gimp3264.iss to reflect the correct
location.
The language files provided by the InnoSetup project (either the main
ones or the "Unofficial" ones, i.e. less maintained ones) at least
provides the name of the language, possibly in English, ideally
self-localized in its own language.
Unfortunately Kabyle didn't have any language file so we were using the
Default one, which ended up showing the lang as a duplicate (and very
wrong) "English".
With this commit, I add code to provide our own very basic base language
file, which would at least contain the language name. There is also a
concept of language ID to be verified in Windows-provided list.
Unfortunately it doesn't have any (actually it was id-ed 0x1000 like
many other languages, which looked therefore to be the code for an
unsupported lang). InnoSetup docs tells us to leave 0 then. We can add
the ability to set a specific code later in the template if we add other
un-provided languages and if they have their own lang id.
With this base infrastructure, we should be able to better support more
languages.
Unfortunately the weird encoding of a string to bytes to get the UTF-8
BOM worked on my local machine, but not on the Windows CI. I'm not going
to fight it and fallback to a shell script.
I am guessing it should work fine on all platform since we use basically
the same sed call in build/windows/gitlab-ci/installer-gimp-msys2.sh
already.
Inno-Setup absolutely requires it to recognize UTF-8 translation files.
This should hopefully be the final fix to #8338.
Note that this fix is full of workaround for meson bugs or limitations.
While it was a one-liner in autotools, added to the existing rule, here
I have to add an additional (non-relevant) target rule, then uglily work
around 2 bugs:
https://github.com/mesonbuild/meson/issues/1564https://github.com/mesonbuild/meson/issues/7696
I can't say I'm so happy about the resulting change, even though it
seems to work. If anyone can propose a nicer build rule, it would be
welcome.
Whenever we have an element without translation, we try to use the value
without a `xml:lang` attribute. That selector was wrong though, which
leads to https://gitlab.gnome.org/GNOME/gimp/-/issues/8338, which should
now be fixed.
Why:
1) users can install .scm scripts to plug-ins dir
2) Crashing scripts do not crash extension-script-fu
Scripts (.scm files) have a shebang and are executable
and in a same-named subdir of plugin dir.
Interpreter/scripts create PDB procs of type PLUGIN unlike extension-script-fu
which creates PDB procs of type TEMPORARY, owned by extension-script-fu.
Unlike other interpreters, the interpreter is-a plugin outright,
not by virtue of the script subclassing GimpPlugin and using GI.
More details in /plug-ins/script-fu/interpreter/README
(1) On recent meson versions, it fixes this error:
> extensions/goat-exercises/meson.build:108:0: ERROR: i18n.merge_file keyword argument 'output' was of type array[str] but should have been str
As docs explains, 'output' only accepts one item in i18n.merge_file().
This bug also happens on older meson (but there the reported error is a
lot less useful as it doesn't mention local meson build code).
(2) `setup.isl.xml` is a temporary intermediary file used to create the
Windows installer. It must not be installed.
(3) `gimp30-windows-installer.mo` itself is only used to create
`setup.isl.xml`. It must not be installed as well.
(4) gimp-tips.(its|loc) files (same for gimp-tags ones) should not be
installed. They are only temporary data.
(5) Fix environment variable: s/GETTEXT_DATA_DIRS/GETTEXTDATADIRS/
Fixes:
> /usr/bin/msgfmt: cannot locate ITS rules for ../../../data/tips/gimp-tips.xml.in
(6) Fix various bugs in the *.setup.isl files creation in autotools
build (typo, wrong files used, order of options in `xsltproc`
apparently meaningful, and so on. I guess the autotools build was
not as well tested as the meson one :P).
(7) Fixing the unit test verifying language lists consistency.
(8) `setup.isl.xml.in` must be added to the distribution.
intltool has long been dead upstream. Let's not poke the dead corpse,
please.
This commit is quite large, but that's mostly since trying to support a
hybrid of both gettext and intltool with both Meson and Autotools was
really hard, so I stopped trying.
Due to gettext relying on quite some things being at the exactly right
place in the autotools build (like `ABOUT-NLS` and `config.rpath`) we
really needed to cleanup the `autogen.sh` to only call `aclocal` and
`autoreconf`. No more strange magic; I tried to do it without changing
too much in the file, and things just broke. If people want to do
something more custom, they can just change the script directly. This
change also uncovered some problems in our `configure.ac`, like using
deprecated macros.
The following major changes happened:
* meson: Changed `custom_target()` to `i18n.merge_file()` for all
supported file types
* Added `.its` and `.loc` files for the GIMP-specific XML formats, so
that gettext understands them
* For the `.isl` (Window installer stuff) file, there's no easy way to
do this in gettext, so instead we start from an XML file (again with
its own ITS rules etc), translate that with gettext, and then use
`xsltproc` with a bit of magic to output the .isl file for each
language
* the `po*/Makefile.in.in` files are migrated to `Makevars` files,
which gettext natively understands.
Fixes: https://gitlab.gnome.org/GNOME/gimp/-/issues/8028
This will allow to use the official Windows installer directly in the
Windows Store, as per the new proposed workflow by Microsoft.
Nevertheless our GIMP for Windows has a built-in update check which
would check if a new version exist and warn people (advising them to go
on the website and download the new installer to update). We obviously
don't want this on the Windows Store which has its own update channel.
It would be confusing.
Therefore I added a feature to disable the built-in update check (not
even showing in Preferences) by tweaking a single package variable. The
installer now comes with new option /DISABLECHECKUPDATE=true which will
add said variable.
JSON does not support comments and their support in Flatpak is possible
through use of json-glib[0]. This is problematic in fully utilizing
flatpak-external-data-checker because its JSON writer does not respect
existing comments. To solve this, make use of Fltpak's specific
behaviour where a "//" key is explicitely ignored while parsing[1].
[0] flatpak/flatpak-builder#363 (comment)
[1] 0e98b7ae19/src/builder-utils.c (L1250)
OpenEXR and mypaint-brushes offer next major versions. GIMP is probably
not ready for the changes in OpenEXR and mypaint-brushes are not yet
finalized. Put their versions under constraints so that automatic PR
creation for dependency bumps can be enabled.
It looks like the gi-docgen build is broken on Windows (though the CI
does show neither stdout nor stderr output, just a failure without
message). This should be fixed, but it's not necessary for the installer
at least.
Note: on autotools, the gi-docgen step works fine on Windows.
We didn't need to do this on the autotools build, simply because the
configure step is much more elaborated there, and was checking for the
header file as well as well as a working mng_create() API. But since
libmng was broken, the test failed, so we didn't need to disable it.
By the way, we should check when the `.pc` file was added, because if it
was after the required version, then the meson test is very wrong. It
should not have been different from the autotools file.
The meson build still has a bunch of issues and build bugs compared to
the autotools build, nevertheless the last blocker issue was dealt with
a few days ago (PDB source generation).
Moreover since the meson build on Windows especially makes such dramatic
difference, in terms of build speed, this is a big improvement for
Windows contributor's comfort, and as such is one less barrier of entry.
Anyway I believe that most Windows developers build GIMP with meson now
so sticking on autotools on this platform is just counter-productive.
This is why it was decided to now make meson the recommended build
system on Windows, as a further step toward a move to meson. It is still
not the recommended build system on the other platforms yet.
The --debug option so far would only output debug info. I want both the
run to actually occur and the debug to be printed, at least in some
cases. So I make this a choice option with 3 variants (no debug, debug
only and run + debug).
Similar to the change I pushed to gimp-help repository:
intltool-extract does not consider the `;` isl-syntax comments because
we tell it it is in the ini format. So let's have our source in actual
ini format (POTFILES does not like to look for translated strings in
constructed files, only from source files), then create the .isl files
from it in 3 steps (first, transform the comments in isl format; then
merge all language in a single .isl file; last generate one .isl per
language).
There were already a bunch of comments in the setup.isl.in file (though
not showing in the po files until now). I checked if they seemed
relevant, fixed some, completed others, duplicated the ones which match
several strings, etc.
(This improvement to allow comments for translators in the installer po
files was requested by Piotr Drąg on the gnome-i18n mailing list)
Some tools have been moved. `aclocal` (and likely other tools, but this
was the first one making an error in the deps-win*-native CI jobs) is
now in `automake-wrapper` package, which itself is a dependency of
`autotools`.
Cf. https://github.com/msys2/MINGW-packages/issues/11114
Instead of replacing various needed macros with random hardcoded values,
just make them mandatory and exit with explicit error when a needed
macro is missing.
Since 2afa019c70,
the Meson configure step will fail when building from tarball (missing `.git` and `gitversion.h` is present)
because `gitversion_h` variable will contain a `list[file]` but `custom_target` does not like that in its `depends` kwarg.
We were already avoiding re-processing a same DLL within the same run
(this can happen when 2 dependencies have themselves a common
dependency). But the dll_link.py script was stateless regarding previous
runs so we might be checking again the same DLLs multiple times (even
though we were not copying them again).
Let's make the script stateful with a new parameter to give a file where
all the previously processed DLL names are stored. I am hoping it would
improve the efficiency of the packaging-win32-native which is suddenly
extra slow (it always times out, even after raising the max job time;
now we time out after 2h30! The 64-bit packaging job just takes 1h,
which is too much already, but still much more reasonable).
This includes:
- "copy-icon" set
- Permission and cleanup rules updated
- Exiv2 bumped to 0.27.5
- Adding an x-checker-data for OpenEXR
- Poppler bumped to 22.01.00
- OpenBlas bumped to 0.3.19
- graphviz bumped to 2.50.0
Also improving a bit the download script by specifying the .isl or .islu
file extension. It's nicer than trying to download randomly, and also it
allows to better compare the list of downloaded files with the list in
gimp3264.iss script.
My previous command was also adding a linefeed just after the BOM. While
I'm not sure it would really break anything for processing these, it's
anyway much more correct to only add the 3 BOM bytes. So here is the
improved command.
Also some language files are supposed to be UTF-8 yet they are missing
the BOM markup (only method to recognize them for InnoSetup). This is
the case for Chinese Traditional. See issue #7676.
Make sure that this lang file has a BOM.
One is a patch for a GExiv2 version below the one we now require, the
second is a patch for GIMP which is now committed and pushed.
Cf. commit 7ed68556c7.
gtk-doc has been slowly dying for the past few years; with gi-docgen we
have a nice successor.
This also makes sure the C documentation also uses the GIR file, which
in turn means faster build times (since all the C code doesn't have to
be parsed and recompiled again), and has a clear dependency graph.
See the [gi-docgen tutorial] for more info on how the system works.
[gi-docgen tutorial]: https://gnome.pages.gitlab.gnome.org/gi-docgen/tutorial.html
Also when working on out-of-tree builds, it would not find the file
anyway and we get this output:
> chmod: cannot access 'test-installer-langs.sh': No such file or directory
Though this was not breaking the tests, it has clearly been useless
until we see this one today.
The patch we needed to test needs completion, so it's of no use to
continue building it until this happens.
Also for some reason, the x86_64 build of GTK3 takes forever and times
out (the same build for 32-bit x86 is done quickly as expected) on
repeated occasions. Since this is unneeded right now, rather than
wasting time on this, I just delete this dep build to use the pre-built
MSYS2 package.
Rewriting commit f8cdec1883 by Jernej Simončič for the development
code (which has a slightly different list of languages).
Also adding the meson version of this change.
Since now InnoSetup fully supports UTF-8 isl (as long as they have a
BOM), let's stop converting translations. Then we also avoid all
conversion errors and get a simpler/more robust build process.
I noticed in our build logs such output:
> Saving to: ‘Basque.isl.53’
Wget does not override same-named files and would append a number. The
thing is that we are not supposed to have other .isl files over there,
but I think current Windows runners on Gitlab are not properly wiped
out. That must be why we get remnant of old files.
Anyway this will make sure we override, hence use the last version of
translations (otherwise we are stuck to old versions as long as they are
not wiped out, since the downloaded file is not properly named).
This tool seems like a mess with various implementations (maybe
distributions patch it?). I'm trying to tweak the script so that it
works at least on the Debian testing/bookworm CI and on my Fedora 33
desktop (and hopefully on more, if not all distribs).
Note that I first thought to use the full option name (`--auto-display`)
but I just got the same error again. It seems xvfb-run from Debian
bookworm just doesn't have this option, and only the older option
--auto-servernum (which is said to be deprecated in favor of
--auto-display in Fedora's xvfb-run for instance, but apparently not on
Debian). At least this works on all distributions (or so it would seem).
Fixes:
> xvfb-run: invalid option -- 'd'
The [[ ]] is not POSIX, hence less portable.
I see our `ninja test` calls in Gitlab CI output a:
> /builds/GNOME/gimp/build/meson/run_test_env.sh: 7: [[: not found
(though it doesn't break the tests)
I forgot to do this so GIMP 2.99.8 official release is marked as
"unknown" instead of our official build. It's alright for this one
(especially for a dev release), just setting this straight for further
builds.
Anyway we disabled use of ccache in an earlier commit 2da70b3fb7 because
of a bug in MSYS2's CPython. So there is no need to call these commands
either. Also it seems to be breaking the 32-bit native Windows build
(from CI log, I am unsure this is because of ccache, but the break
happens just after running `ccache --zero-stats`).
This is untested on my side, because the bug only happens on native
builds with meson (our CI has cross-builds with meson and native builds
with autotools and I only do cross-builds locally) but I think/hope it
will work.
Basically we were using .full_path() because these rc files were also
used as input of some configure_file() calls which doesn't like custom
target objects as input (it wants strings or file objects). Yet a bug
in meson didn't like the colon used in native Windows full paths ('C:'
and such) when used in windows.compile_resources(). This has been fixed
by Luca Bacci in: https://github.com/mesonbuild/meson/pull/9368
Yet we just cannot depend on very early meson (or worse dev meson code).
On the other hand, if the input is a custom_tgt object, it uses the
object ID which we give as first parameter of custom_target() so we know
it's appropriately named without colons (such as 'gimp_plugins_rc').
Thus we should not bump into this issue again.
For the few usage in configure_file(), I just add a .full_path() only
when needed at call time.
Last but not least, I replace the bogus `meson --version` call by a
`python3 -c 'exit()'` as advised by Eli Schwartz:
2afa019c70 (note_1284951)
The reason is that it is apparently possible (or will be when some
reimplementation of meson will be done) that the `meson` executable
itself does not exist. On the other hand, `python3` should always be
there, as a mandatory dependency of the build tool.
In order to use an appropriate `python3`, I made the
pythonmod.find_installation() check required in our build (which should
not be a problem since it's a meson requirement as well), even when the
-Dpython option is false (this one depends on other requirements too
anyway, such as version and pygobject). This way I can call this meson
variable of discovered python in my bogus call, instead of calling a
(potentially different) python from PATH environment.
All the os.EX_* constants are Unix-only (and possibly not even not on
all Unix/Linux-like platforms, according to docs) so we should not use
them, especially for a script which we may use on Windows (we also run
it when cross-compiling from Linux, but natively on Windows as well).
Fixes this exception (which would only happen when there is another
critical issue anyway, so it's not making a bigger problem; yet it's
better to cleanly exit with an error code rather than by an exception):
> File "C:\_r\_builds\k3_3muaB\0\GNOME\gimp\build\windows\gitlab-ci\dll_link.py", line 124, in copy_dlls
sys.exit(os.EX_DATAERR)
> AttributeError: module 'os' has no attribute 'EX_DATAERR'
Also use it to fix packaging of GIMP for the Windows installer (native
CI job). The CI was indeed failing to package libbrotlienc.dll,
dependency of libjxl.dll, for the simple reason that they were on
different prefixes. By calling dll_link.py on one prefix, then the
other, we were failing to grab the deeper dependency. Now with this new
ability to set several sources, the script is able to search everywhere
(with first prefix given on the CLI call as priority).
I always have to search again the InnoSetup repository for the language
file. Add the link in the failed test output so that we don't waste time
searching the next time.
Also when the new lang is "Unofficial", the installer script has to be
updated as well, because these lang files must be downloaded. Add a help
text saying this as well.
Translation files were added in commit cec3c3a159 but not to the
installer and build files, which is why "gimp-distcheck-debian" job was
failing in the CI.
After some recent patch added to Python on MSYS2, in the same time as
they bumped from Python 3.9.6 to 3.9.7, our native Windows build started
breaking.
This patch modified `cygwinccompiler.py` to use CC environment variable
as being necessarily a single executable whereas if it were made of 2
commands (such as "ccache gcc"), the call was failing because the code
now tries to find a single command with this name (as though the space
belongs to the file name).
Therefore the line:
> File "C:/msys64/mingw64/lib/python3.9/distutils/cygwinccompiler.py", line 451, in is_cygwincc
> out_string = check_output([cc, '-dumpmachine'])
Resulted in the error:
> FileNotFoundError: [WinError 2] The system cannot find the file specified
For now, let's just not set ccache this way, even though this method is
normally meant to work and is one of the 2 officially proposed methods
(the other being to use symlinks named as compilers in priority in
PATH).
Also I'm not even sure ccache is useful at all right now (is cache
finally stored/reused between CI runs? I remember we tried to make it
happen, but I can't remember if we really had this properly in the end).
See: https://github.com/msys2/MINGW-packages/issues/9677
From Flatpak's NEWS:
> A new fallback-x11 permission grants X11 access, but only if the user
> is running in a X11 session. For applications that support both
> Wayland and X11, this can be used to ensure that the app doesn't have
> unnecessary X11 access while in Wayland, but still works in an X11
> session.
by adding special filler custom_target() build rules.
Basically, these build rules do nothing (a mere meson --version call),
but they ensure that `git-version.h` is built first, before the dependant
rc files are used in respective resource compiler build targets.
This still a nasty trick (not a proper solution), but it do the job.
See #6257 for additional information.
This is based from changes in wip/release/2-99-8 branch or the Flathub
flatpak (so not necessarily released yet):
- libheif bumped to 1.12.0
- Cairo with new patch to fix#235.
For the installer, we must also manually pull all used official
language, so I am adding a test checking that the list of pulled file
matches the list from the installer script.
libwmf was still relying on a script called freetype-config instead of
using standard pkg-config. It seems it got wiped out in recent freetype2
(or at the very least, this script is not present anymore in freetype2
version 24.0.18 from master runtime of GNOME SDK).
This patch uses pkg-config in libwmf configuration instead.
As I also had some autoheader "missing template" warnings (which were
failing the recreation of config scripts), I add placeholder
descriptions to AC_DEFINE() macros, as this is apparently now mandatory.
We were building it to add the patch glib!2020, but it has now been
backported in MSYS2 package:
https://github.com/msys2/MINGW-packages/issues/9154
This was about the most infamous bug #913 for very slow file dialogs on
Windows when some drives are disconnected, or with slow/non-accessible
network drives or even fake floppy drives created in the Bios.
Similarly we also wanted glib!2205 and glib!2210 for bug #6780 about
GIMP crashing unexpectedly when images are opened in other (apparently
unrelated applications). I had not updated our build scripts yet, but
anyway, it got backport to the MSYS2 package first, then even to GLib
2.68.4 which has been recently released (and bumped in MSYS2 as well).
See: https://github.com/msys2/MINGW-packages/issues/9283
So let's rely again on MSYS2 package!
I completely forgot that since the installer is built on a Windows
runner, I cannot expect a standard Linux shell syntax.
As a consequence, commit de9a171a19 broke the "win-installer-nightly"
job with the following error:
> The token '&&' is not a valid statement separator in this version.
Rather than trying to find the equivalent command to run on powershell
or whatever, let's just compute the checksum at the end of our installer
creation script.
Synced from the beta flatpak. The previous manifest rules were building
fine on Flathub build servers, but not on GNOME CI ones. It resulted in
a bunch of "ISO C++17" errors when building ilmbase.
Maybe just restricting to C++14 through build fine would have been fine,
but anyway let's also update the dependencies in the same time as we
were outdated.
As per state in the wip/release/2-99-8 branch of the beta flatpak.
In particular, we update some dependencies (poppler, ghostscript and
SuiteSparse).
It should also fix the master flatpak build which seemed to fail on
downloading SuiteSparse sources. Since their upstream moved their
tarballs to be downloaded from Github, it should take care of this issue
by side effect.
The MSYS2 package got recently bumped from 3.8 to 3.9.6.
At first I wanted to update our packaging and installer scripts to be
more generic using glob patterns (so that they should work now and
should continue to work even if bumping to a higher minor version in the
future). Unfortunately this would work for `package-gimp-msys2.sh` but
in `files.isi`, it would only work for `libpython3.*.dll`, not for the
python3.9/ folder. InnoSetup apparently doesn't support using a folder
as source (or maybe just a folder with glob like `python3.*`) as it
resulted in a "No files found matching" error.
So leave everything with the accurate version (because anyway it's much
better to get an early failure than only at the very last step).
Same as MSYS2, add a patch to fix keyboard input when using IMEs (which
should hopefully fix#1603). Note that this patch should be in the next
release.
Also remove the Windows Pointer Input Stack support as it is in 3.24.30.
Finally apply the patch from gtk!3661 for testing (instead of the patch
from gtk!3275), as it is supposed to fix#5475. This is the reason why
we still build our own GTK3.
We don't know when the next GTK3 release will be and this is cool enough
that we want to test it soonish, even more with MR !458 coming soon with
a Preferences option.
The dll_link script would overwrite the same dependencies over and over,
for instance when needed for several binaries, but worse when available
in several source directories. In our case, we look up 2 source
directories: our install prefix first, then the prefix for MSYS2
pre-built packages. So it turns out we would be overriding any
custom-built package also installed through MSYS2 (such as our patched
GLib, see my previous commits).
As a side effect, it should also make the packaging step faster as we
don't re-copy unecessarily the same DLLs over and over again. The first
one to go in stays in.
Since gio searches its modules based on the paths as advertized by the
pkg-config, let's just move the pre-compiled modules (by MSYS2
packages). We build the same version of glib2 with the same options, and
only one additional patch. So this should not be a problem to use the
pre-built modules rather than rebuilding glib-networking too.
The MSYS2 package for glib2 does not include the patch to reduce delays
of disconnected volumes (glib!2020).
Let's make our own build in our CI for our installer (hence also
experimenting overriding MSYS2 packages when necessary).
Except for this patch, this is the same build as MSYS2 and same option,
as described in:
https://github.com/msys2/MINGW-packages/tree/master/mingw-w64-glib2
We were only comparing the po list with the language list in the
gimp3264.iss. Nevertheless since we also generate the <code>.setup.isl
files, we should also verify generated files corresponds exactly to the
same list of languages.
This commit does it for meson and autotools build.
This is also how I fixed the meson list (cf. previous commit).
… conversion when some characters are not convertible.
Currently failed conversion ended up in incomplete .isl files (autotools
build) or would break the build (meson build). Ideally we should use a
target encoding which contains all source characters, but we use the
encoding as set upstream in the LanguageCodePage for the given language
file.
I'm not sure if maybe we can mix the encoding by adding our own
LanguageCodePage at the top of our generated <code>.setup.isl, then we
could just use UTF-8 for any language. It will have to be tested.
For now let's just discard non-convertible characters, assuming there
shouldn't be too many of these. It's the lesser evil in this situation.
- dri access needed (cf. commit de8be943 on our Flathub repo).
- GNOME runtime still only provides lcms 2.10 (even in its master build)
and we need version 2.12 to avoid some crashes (cf. commit ae60863e
from our flathub repo).
Trying to keep the differences to a minimum. There are still some, like
the extension point is absent from the nightly manifest, but I'm not
sure if it makes sense to have it there.
Also top "cleanup" list is different but we should probably take a
closer look at this. Maybe it's outdated on both sides anyway.
This reverts commit 61389adfa0.
I was initially hoping to debug why the GEGL `master` HEAD was
presumably failing to build (according to the reverted commit) but it
actually doesn't (as tested in a feature branch's CI) even though I
don't see any recent change looking like a build fix. So let's just do a
simple reverse. :-)
- Poppler 20.10.0 to 21.04.0
- poppler-data from 0.4.9 to 0.4.10
- OpenBLAS from 0.3.9 to 0.3.15
- libde265 from 1.0.7 to 1.0.8
- gexiv 0.12.1 to 0.12.2
Add patches and dependencies needed to build the development
version of GIMP. Also switches the in-tree manifest to using
the nightly branch of the GNOME SDK and meson
as the buildsystem.
Since we moved most of them to bin/, share/lua*/ and lib/lua/ files are
not necessary anymore (according to my tests so far at least). Let's not
include them.
Also exclude the lua DLL from the generic libraries. It is only for when
the lua option is set.
No need to have GIMP trying to run the Javascript goat-exercise at
startup. All it does is make annoying error message on console output.
We know it won't run because no interpreter is available. No need for
trying.
It looks like the DLL ends up searched into bin/lgi/ and other lua files
from bin/lua/. There might be better solutions for the issue, but for
the time being, it seems to work ok.
Note that ender used instead to rebuild lua with the following changes
(cf. IRC):
> src/luaconf.h:
> #define LUA_PATH_DEFAULT \
> "!\\..\\share\\lua\\5.1\\?.lua;" "!\\..\\share\\lua\\5.1\\?\\init.lua;" LUA_LDIR"?.lua;" LUA_LDIR"?\\init.lua;"
> #define LUA_CPATH_DEFAULT \
> LUA_CDIR"..\\lib\\lua\\5.1\\?.dll;" LUA_CDIR"?.dll;" LUA_CDIR"loadall.dll"
But moving files around in the installed tree is much simpler than
rebuilding the whole lua just for this.
Note that I must not install both lua51 with luajit because these are
conflicting. Let's go with luajit from feedback we had on the best
choice (though this topic itself seems a bit heated actually).
Also clean-out the unexpected file removal because now I had the
opposite case, i.e. a CI problem because of this. And from my latest
tests, it seems to work ok for the time being without, which is much
cleaner anyway. So let's go like this for the time being.
- libwmf patch for issue #4061 is applied upstream (libwmf). Even though
no new libwmf release happened, the MSYS2 package applied the patch to
libwmf 0.2.12. So it's in our installer. Thanks to lillolollo for
staying on top of things, as usual.
Cf. https://github.com/msys2/MINGW-packages/pull/6977
- glib permission issue (#4594 about GIMP preventing the third-party
software Spotify from starting) is included since glib 2.67.6/2.68.0.
Since MSYS2 uses glib 2.68.2, it's all good.
- patch for deprecated GTK+2.24 was kept in `master` repo mostly as a
reminder of having to deal with issue #1082 (former bug 780979) about
transparent windows from other software interfering with GIMP. This
was fixed as gtk!2767 which is available since GTK 3.24.27. MSYS2 uses
GTK 3.24.29 to this day.
Note that this patch is still relevant in the GIMP 2.10 series (hence
in gimp-2-10 branch), not in the current GIMP 2.99 series.
By enabling this option on Linux, not only will the installer language
file be generated, but the `make check` will also now validate that the
lang list is consistent with existing gettext files (see commit
8a42c6ccc2). So it's useful information to know this for instance as
soon as some translators add a new localization.
Also oppositely remove the option on the MSYS2 native Windows 32-bit
build. For Windows, we only need this option once, as we use the
language files generated by the 64-bit build.
Add GObject Introspection libs, python libs and various binaries. Not
sure why we need 3 python binaries. This would need to be investigated
and possibly cleaned up a bit. Similarly maybe it would be better to be
a bit more selective about what we take from lib/python3.8/ folder
(looking what's in there, I wondered if some of the stuff were not
pulled by some dependencies and/or should maybe be filtered out).
But for now, let's make the InnoSetup scripts happy.
In any case, the resulting installer was tested and now Python plug-ins
work successfully. Wouhou!
Otherwise the extension files from the 32-bit build override the ones
from the 64-build. This is wrong first because we get 32-bit executables
uselessly (even though Windows 64-bit can run them, we should install
the right ones) and also because we don't build Vala plug-ins on 32-bit
(doesn't work for some reason) and as we override the extension
manifest, the Vala goat exercise is not made available even though it's
installed.
This way, we will avoid in the future any discrepancies between
languages set in the Windows installer and available translations (po
files in po-windows-installer/) because `make check`/`ninja test` will
fail.
I left the version I was using while testing, but this is obviously
wrong as we would always forget to update it (actually even now it was
wrong as it was producing an installer versionned 2.99.6 whereas it
should have been 2.99.7!). Instead let's grep the major/minor/micro from
the build system.
- Adding a patch sent to me by Sylvie Alexandre meant to help aalib
build on MSYS2 for Windows 32 and 64-bit.
- Additionally, add an additional patch from myself because it was still
not building properly.
- Also update the config.guess|sub files because the original ones (from
2001!) were just too old and not properly recognizing the host mingw
system (especially the 64-bit one apparently) in the MSYS2 CI jobs of
GIMP.
- Finally regenerate the whole aclocal/libtoolize/autoconf/automake
build system because these old files just don't play nice with recent
autotools though the source files still regenerate fine (despite with
some warnings, but nothing blocking).
- Add crt-git dependency because libws2_32 is in there.
Run InnoSetup in the Windows CI to build the installer from both the 32
and 64-bit builds.
Current limitations:
- No installer signature yet.
- Dependencies will have to be checked more thoroughly.
- Apart from babl and GEGL, we may want to make custom builds of any
package which has a patch in build/windows/patches/ (Windows-specific
patches) and build/patches/ (all platform patches).
- Plug-in interpreters (Python, Lua…) don't work. This will need to be
looked at in detail.
Globally this first automated installer build works fine though, as I
could install it in a Windows 10 VM and GIMP ran fine! So it's a first
step towards fully automated releases for Windows.
With compression level "ultra64" for LZMA, default value is 65536, which
is far enough (the installer file was only 100kib bigger, it doesn't
make that big of a difference in the end).
With the original value, the CI build would fail with "Out of memory"
error.
See also: https://jrsoftware.org/ishelp/index.php?topic=setup_lzmadictionarysize
Do not try to follow up on the installed ghostscript (otherwise we'll
always have to fix as MSYS2 packages get updated). Instead, just install
whatever is in the /share/ghostscript/ path (assuming there is data for
a single version, which should be the case, especially on a resetted CI
build) and excluding the /doc/ folder.
These files I'm adding are currently being requested by the installer
script, even though I'm not sure at all how much needed they are,
especially for some of them (because I could successfully create an
installer by just commenting these out in the installer script).
Note: Vala API doesn't build well on the 32-bit build. Not sure why (the
meson logs for GObject Introspection build are just as empty as ever),
but it won't generate the VAPI. So I disabled the option on 32-bit.
Based on available files in po-windows-installer/, here is the exact
corresponding list. Many <code>.setup.isl were not generated, even
though translations existed, and oppositely there was one (hr) which has
no translation file.
Bruno Lopes