add arm build

docker/Dockerfile.arm

@@ -0,0 +1,11 @@
+FROM 172.20.32.187/pipeline-service/aimstack/aim:3.19.0-build-env 
+
+RUN pip config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple
+COPY aim*.whl /opt/aim/
+RUN pip install /opt/aim/aim_ui-3.19.0-py3-none-any.whl
+RUN pip install /opt/aim/aim-3.19.0-cp39-cp39-linux_aarch64.whl
+
+WORKDIR /opt/aim
+RUN aim init
+ENTRYPOINT ["aim"]
+CMD ["up"]

docker/Dockerfile.build-env

@@ -0,0 +1,41 @@
+FROM ccr.ccs.tencentyun.com/somunslotus/python:3.9.10-slim-arm
+
+
+# 替换 Debian 源为阿里云源
+RUN sed -i.bak \
+    -e 's|http://[^/]*/debian|https://mirrors.aliyun.com/debian|g' \
+    -e 's|http://security.debian.org|https://mirrors.aliyun.com/debian-security|g' \
+    /etc/apt/sources.list && \
+    # 清空备份文件
+    rm -f /etc/apt/sources.list.bak
+
+ENV HTTP_PROXY="http://172.20.32.253:3128" \
+    HTTPS_PROXY="http://172.20.32.253:3128" \
+    NO_PROXY="localhost,127.0.0.1" \
+    http_proxy="http://172.20.32.253:3128" \
+    https_proxy="http://172.20.32.253:3128" \
+    no_proxy="localhost,127.0.0.1" 
+
+# 更新并安装编译工具
+RUN apt-get update -y && \
+    apt-get install -y --no-install-recommends \
+    build-essential \
+    gcc \
+    g++ \
+    && apt-get clean \
+    && rm -rf /var/lib/apt/lists/*
+
+# 设置工作目录
+WORKDIR /app
+
+# 设置 pip 清华源
+RUN pip config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple
+
+# 预先复制 requirements 文件（利用缓存层）
+COPY ./requirements-new.txt /app/
+
+# 安装 Python 依赖
+RUN pip install --no-cache-dir --upgrade pip && \
+    pip install --no-cache-dir -r requirements-new.txt
+
+

docker/arm-build-image-node18.sh

@@ -0,0 +1,66 @@
+#!/bin/bash
+
+# 进入182服务器，然后切换到conda activate aim-build环境进行构建
+#构建aim 包
+
+
+echo "build aim package success"
+
+#编译前端代码
+cd ../aim/web/ui
+
+if [ -d build ]; then
+   echo "rm build dir success"
+    rm -rf build/
+fi
+
+if [ -d aim_ui/build ]; then
+   echo "rm aim_ui/build dir success"
+    rm -rf aim_ui/build/
+fi
+
+docker run -v $(pwd):/code  -w /code \
+    -e http_proxy=http://172.20.32.253:3128 -e https_proxy=http://172.20.32.253:3128 \
+    ccr.ccs.tencentyun.com/somunslotus/node:18-alpine-arm  /bin/sh -c "npm config set registry https://registry.npmmirror.com && npm install --legacy-peer-deps --verbose && npm run build"
+
+if [ $? -ne 0 ]; then
+    echo "build ui failed"
+    exit 1
+fi
+
+
+mv -f build/ aim_ui/
+echo "build ui success"
+#构建aim-ui包
+python setup.py bdist_wheel
+if [ $? -ne 0 ]; then
+    echo "build aim-ui package failed"
+    exit 1
+fi
+
+cp dist/aim_ui*.whl ../../../docker/
+echo "build aim-ui package success"
+#取日期作为镜像的tag
+
+cd ../../../docker/
+date=$(date +%Y%m%d%H%M)
+image=172.20.32.187/pipeline-service/aimstack/aim:3.19.0-$date-arm 
+docker build -t  "$image"  \
+   --build-arg "HTTP_PROXY=http://172.20.32.253:3128" \
+    --build-arg "HTTPS_PROXY=http://172.20.32.253:3128" \
+    -f Dockerfile.arm  .
+
+if [ $? -ne 0 ]; then
+    echo "build image failed"
+    exit 1
+fi
+
+echo "build image success"
+docker push "$image"
+if [ $? -ne 0 ]; then
+    echo "push image failed"
+    exit 1
+fi
+
+echo "build image success"
+

docker/arm-build-image.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+
+
+
+
+
+date=$(date +%Y%m%d%H%M)
+image=172.20.32.187/pipeline-service/aimstack/aim:3.19.0-$date-arm 
+docker build -t  "$image"  \
+   --build-arg "HTTP_PROXY=http://172.20.32.253:3128" \
+    --build-arg "HTTPS_PROXY=http://172.20.32.253:3128" \
+    -f Dockerfile.arm  .
+
+if [ $? -ne 0 ]; then
+    echo "build image failed"
+    exit 1
+fi
+
+echo "build image success"
+docker push "$image"
+if [ $? -ne 0 ]; then
+    echo "push image failed"
+    exit 1
+fi
+
+echo "build image success"

docker/arm-build-ui-whl.sh

@@ -0,0 +1,54 @@
+#!/bin/bash
+
+# 切换到项目 UI 目录
+cd ../aim/web/ui || { echo "错误：无法切换到 aim/web/ui 目录"; exit 1; }
+
+# 配置变量
+IMAGE="172.20.32.187/pipeline-service/aimstack/aim:3.19.0-build-env"
+CONTAINER_NAME="aim-ui-builder-$(date +%s)"
+HOST_WORKDIR=$(pwd)
+PROJECT_ROOT=$(dirname "$(dirname "$HOST_WORKDIR")")  # 获取项目根目录
+DOCKER_DIR="$PROJECT_ROOT/docker"  # docker 目录绝对路径
+CONTAINER_WORKDIR="/code"
+
+echo "=== 开始构建 Aim UI 软件包 ==="
+echo "使用镜像: $IMAGE"
+echo "主机工作目录: $HOST_WORKDIR"
+echo "Docker 输出目录: $DOCKER_DIR"
+echo "容器工作目录: $CONTAINER_WORKDIR"
+
+# 确保 docker 目录存在
+mkdir -p "$DOCKER_DIR"
+
+# 启动容器并执行构建
+docker run --rm \
+  --name "$CONTAINER_NAME" \
+  -v "$HOST_WORKDIR:$CONTAINER_WORKDIR" \
+  -v "$DOCKER_DIR:/docker_out" \
+  -w "$CONTAINER_WORKDIR" \
+  "$IMAGE" \
+  /bin/bash -c "\
+    echo '== 执行构建命令 =='; \
+    if ! python setup.py bdist_wheel; then \
+        echo '构建 Aim UI 软件包失败'; \
+        exit 1; \
+    fi;"
+
+
+cp dist/aim_ui*.whl ../../../docker/; \
+echo '生成的文件列表:'; \
+ls -lh dist/*.whl; \
+echo '输出到 docker 目录的文件:'; \
+ls -lh ../../../docker/aim_ui*.whl; \
+echo '== 构建完成 =='
+
+# 检查构建结果
+if [ $? -eq 0 ]; then
+  echo "=== Aim UI 软件包构建成功 ==="
+  echo "生成的 wheel 文件已复制到: $DOCKER_DIR"
+  echo "文件列表:"
+  ls -lh "$DOCKER_DIR"/aim_ui*.whl
+else
+  echo "=== 构建失败，请检查错误信息 ===" >&2
+  exit 1
+fi

docker/arm-build-ui.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+# 进入182服务器，然后切换到conda activate aim-build环境进行构建
+#构建aim 包
+
+
+echo "build aim package success"
+
+#编译前端代码
+cd ../aim/web/ui
+
+if [ -d build ]; then
+   echo "rm build dir success"
+    rm -rf build/
+fi
+
+if [ -d aim_ui/build ]; then
+   echo "rm aim_ui/build dir success"
+    rm -rf aim_ui/build/
+fi
+
+docker run -v $(pwd):/code  -w /code \
+    -e http_proxy=http://172.20.32.253:3128 -e https_proxy=http://172.20.32.253:3128 \
+    ccr.ccs.tencentyun.com/somunslotus/node:18-alpine-arm  /bin/sh -c "npm config set registry https://registry.npmmirror.com && npm install --legacy-peer-deps --verbose && export NODE_OPTIONS=--openssl-legacy-provider &&   npm run build"
+
+if [ $? -ne 0 ]; then
+    echo "build ui failed"
+    exit 1
+fi
+
+
+mv -f build/ aim_ui/
+echo "build ui success"
+
+

docker/arm-build-whl.sh

@@ -0,0 +1,47 @@
+#!/bin/bash
+
+#!/bin/bash
+
+cd ../
+# Aim 软件包构建脚本
+# 使用 Docker 容器环境构建并复制 wheel 文件
+
+# 配置变量
+IMAGE="172.20.32.187/pipeline-service/aimstack/aim:3.19.0-build-env"
+CONTAINER_NAME="aim-builder-$(date +%s)"
+HOST_WORKDIR=$(pwd)
+CONTAINER_WORKDIR="/code"
+
+echo "=== 开始构建 Aim 软件包 ==="
+echo "使用镜像: $IMAGE"
+echo "主机工作目录: $HOST_WORKDIR"
+echo "容器工作目录: $CONTAINER_WORKDIR"
+
+# 启动容器并执行构建
+docker run --rm \
+  --name $CONTAINER_NAME \
+  -v "$HOST_WORKDIR:$CONTAINER_WORKDIR" \
+  -w $CONTAINER_WORKDIR \
+  $IMAGE \
+  /bin/bash -c "\
+    echo '== 在容器中执行构建命令 =='; \
+    python setup.py bdist_wheel; \
+    BUILD_RESULT=\$?; \
+    if [ \$BUILD_RESULT -ne 0 ]; then \
+      echo '构建 Aim 软件包失败'; \
+      exit 1; \
+    fi; \
+    echo '构建成功'; \
+    echo '复制 wheel 文件到 docker 目录'; \
+    cp dist/aim*.whl docker/; \
+    echo '== 构建完成 =='"
+
+# 检查构建结果
+if [ $? -eq 0 ]; then
+  echo "=== Aim 软件包构建成功 ==="
+  echo "生成的 wheel 文件已复制到: $HOST_WORKDIR/docker/"
+  ls -lh "$HOST_WORKDIR/docker/aim"*.whl
+else
+  echo "=== 构建失败，请检查错误信息 ==="
+  exit 1
+fi

docker/arm-build-whl.sh.bak

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+# 进入182服务器，然后切换到conda activate aim-build环境进行构建
+cd ..
+#构建aim 包
+python setup.py bdist_wheel
+if [ $? -ne 0 ]; then
+    echo "build aim package failed"
+    exit 1
+fi
+
+cp dist/aim*.whl docker/
+
+echo "build aim package success"
+

docker/build-env-image.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+# Docker 构建脚本（带代理设置）
+# 用法：./build.sh [镜像标签]
+
+# 设置代理配置
+DOCKERFILE_PATH="."  # Dockerfile 所在目录
+
+
+date=$(date +%Y%m%d%H%M)
+image=172.20.32.187/pipeline-service/aimstack/aim:3.19.0-build-env
+
+# 允许通过参数设置镜像标签
+
+# 构建命令
+docker build   \
+  -t $image  \
+  -f Dockerfile.build-env \
+  "${DOCKERFILE_PATH}"

docker/package-lock.json

@@ -0,0 +1,6 @@
+{
+  "name": "code",
+  "lockfileVersion": 2,
+  "requires": true,
+  "packages": {}
+}

docker/requirements-new.txt

@@ -0,0 +1,24 @@
+aimrecords==0.0.7
+aimrocks==0.4.0
+cachetools>=4.0.0
+click>=7.0
+cryptography>=3.0
+filelock<4,>=3.3.0
+numpy<2,>=1.12.0
+psutil>=5.6.7
+RestrictedPython>=5.1
+tqdm>=4.20.0
+aiofiles>=0.5.0
+alembic<2,>=1.5.0
+fastapi<1,>=0.69.0
+jinja2<4,>=2.10.0
+pytz>=2019.1
+SQLAlchemy>=1.4.1
+uvicorn<1,>=0.12.0
+Pillow>=8.0.0
+packaging>=15.0
+python-dateutil
+requests
+websockets
+boto3
+Cython==3.0.0a9

package-lock.json

@@ -1,5 +1,5 @@
 {
-  "name": "aim",
+  "name": "code",
   "lockfileVersion": 2,
   "requires": true,
   "packages": {}