chyyuu
/
M1s_BL808_example
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

docs(readme): add instructions for burning E907 firmware

This commit is contained in:
taorye 2022-11-09 20:09:47 +08:00
parent 368020c86d
commit 04088cdb3e
No known key found for this signature in database
GPG Key ID: EDFFE0AD344F5FE0
2 changed files with 17 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
assets/image-20221109200656.jpg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 162 KiB

19
readme.md
View File

@ -60,6 +60,8 @@
- Use the type-c usb cable to connect from the PC side to the UART port of the board
- Keep the `BOOT` button pressed and click `RST` button, then release the `BOOT` button
- Startup `BLDevCube Tools` and choose `BL808` chip
- Configure the tool according to the label below, finally click `Create & Download` will start to download firmware
@ -74,9 +76,22 @@
- Configure the tool according to the label below, finally click `Create & Download` will start to download firmware
![image-20221018233819623](assets/image-20221018233819623.png)
![image-20221018233819623](assets/
image-20221018233819623.png)
4. About partition table files
4. Download e907 firmware
- Use the type-c usb cable to connect from the PC side to the UART port of the board
- Keep the `BOOT` button pressed and click `RST` button, then release the `BOOT` button
- Startup `BLDevCube Tools` and choose `BL808` chip
- Configure the tool according to the label below, finally click `Create & Download` will start to download firmware
![image-20221109200656](assets/image-20221109200656.jpg)
5. About partition table files
The partition table of bl808 is written in toml file format. You can specify the flash size used by the firmware by modifying the partition table.