Use setup_timer and mod_timer instead of structure assignments as it
is the preferred way to setup and set the timer.
Signed-off-by: Roman Kollar <rkollar@mail.muni.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Configure the XIO2001 bridge on PCI Express cards so that it does less
needless prefetching.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make it possible for cards to have three stereo analog input pairs.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cards without S/PDIF output do not need those controls.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit commit [33f4acd3b214: ALSA: hda - Enable mic mute hotkey
and LEDs for an HP machine] introduced a quirk for a HP machine
involving with the input event handling. Although the relevant code
is protected via IS_ENABLED(CONFIG_INPUT), this doesn't suffice when
the audio driver is built in while the input is module.
As an easy workaround, this patch forcibly selects CONFIG_INPUT in
Kconfig. This shouldn't be a practical problem since CONFIG_INPUT is
almost mandatory for all systems. Also, this allows to remove the
ugly ifdefs in the code.
Fixes: 33f4acd3b2 ('ALSA: hda - Enable mic mute hotkey and LEDs for an HP machine')
Acked-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes the following compilation error:
include/sound/compress_driver.h: In function ‘snd_compr_drain_notify’:
include/sound/compress_driver.h:177:2: error: implicit declaration of function ‘snd_BUG_ON’ [-Werror=implicit-function-declaration]
if (snd_BUG_ON(!stream))
snd_BUG_ON() is defined in sound/core.h but the file is not included explicitly,
so include it.
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.
This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove declarations from the header and move the definitions up in the
source so they need not be forward declared.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Which *_disconnect() to call on disconnect is known at initialization.
Add a function pointer to the `usb_line6' struct and use to call into
the appropriate logic instead of evaluating the conditional logic.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Which *_process_message() function (if any) to call when data is
received is known at initialization. Add a function pointer to the
`usb_line6' struct and use to call into the appropriate logic instead
of evaluating the conditional logic for each message.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read. This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read. This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device type can now be used to determine the addresses of the
audio endpoints for the interface. Drop the conditional logic and make
these values properties.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 1027f476f5 (staging: line6: sync with upstream) removed PCM
from the Pocket POD capabilities but left the endpoint configuration.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device type can now be used to determine the addresses of the
control endpoints for the interface. Drop the conditional logic and
make these values properties.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device type can now be used to determine the altsetting for the
interface. Drop the conditional logic and make this value a property.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver only supports interface 0 of the TonePort UX2 and POD Studio
UX2 devices. Use the device table to filter on this.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver only supports interface 1 of the Pocket POD. Use the device
table to filter on this.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver uses a different altsetting depending on the interface. Add
device type entries for each of these.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PODxt Live device has both a POD and a Variax interface. Add device
type entries for each of these.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save
horizontal space when defining the properties entries. Now that these
are no longer limited to single lines this is not such a concern.
Specify capabilities individually when defining each property for
better clarity.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Specify the index of the properties entry explicitly to define this
structure more robustly. Also, drop the `L6PROP' macro in favor of
initializing each member explicitly on its own line since horizontal
space is limited and more attributes will be added later.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Including "BIT" in the macro name is pointless. Replace with "CAP" to
provide some context for what its value represents.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are now only used to build the device table. Each entry in this
table is already clearly documented as to what device it maps to so the
macros become unnecessary indirection.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver currently uses the device's idProduct as input to several
switch statements. In some cases this is not sufficiently granular and
the interface number must be taken into account.
Store the device type in `usb_line6' and key off of it instead. New
types can then be added that map to specific interfaces on the device so
that this conditional logic can be flattened out.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current logic uses the index of the matched entry from the device
table as an offset to the corresponding properties entry. The values
of the new `line6_device_type' enum are ordered such that they can be
used as an index into either of these arrays. Drop the device entry
lookup logic and use the device type (via the .driver_info member)
instead.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Define an enum containing the supported devices and associate each entry
in the device table to the respective value.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Support for these devices appears to have never been completed. Remove
them from the device table along with a minimal amount of supporting
code.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function was no longer used as of commit 2807904441 (staging:
line6: drop MIDI parameter sysfs attrs).
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai