rtc: mc146818-lib: Fix the AltCentury for AMD platforms
ANBZ: #5455 commit3ae8fd4157
upstream. Setting the century forward has been failing on AMD platforms. There was a previous attempt at fixing this for family 0x17 as part of commit7ad295d519
("rtc: Fix the AltCentury value on AMD/Hygon platform") but this was later reverted due to some problems reported that appeared to stem from an FW bug on a family 0x17 desktop system. The same comments mentioned in the previous commit continue to apply to the newer platforms as well. ``` MC146818 driver use function mc146818_set_time() to set register RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage reset value on Intel platform to 0x7. While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]: DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined as reserved. DV0 is set to 1, it will select Bank 1, which will disable AltCentury register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32 (AltCentury), the CMOS write will be failed on code: CMOS_WRITE(century, acpi_gbl_FADT.century). Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will enable AltCentury(0x32) register writing and finally setup century as expected. ``` However in closer examination the change previously submitted was also modifying bits 5 & 6 which are declared reserved in the AMD documentation. So instead modify just the DV0 bank selection bit. Being cognizant that there was a failure reported before, split the code change out to a static function that can also be used for exclusions if any regressions such as Mikhail's pop up again. Cc: Jinke Fan <fanjinke@hygon.cn> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/ Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com [fix conflict during backport] Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Artie Ding <artie.ding@linux.alibaba.com> Link: https://gitee.com/anolis/cloud-kernel/pulls/1928
This commit is contained in:
parent
be2b8e74a4
commit
8eb137f522
|
@ -115,6 +115,17 @@ unsigned int mc146818_get_time(struct rtc_time *time)
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(mc146818_get_time);
|
||||
|
||||
/* AMD systems don't allow access to AltCentury with DV1 */
|
||||
static bool apply_amd_register_a_behavior(void)
|
||||
{
|
||||
#ifdef CONFIG_X86
|
||||
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
|
||||
boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
|
||||
return true;
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
/* Set the current date and time in the real time clock. */
|
||||
int mc146818_set_time(struct rtc_time *time)
|
||||
{
|
||||
|
@ -189,6 +200,9 @@ int mc146818_set_time(struct rtc_time *time)
|
|||
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
|
||||
if (follow_mc146818_divider_reset()) {
|
||||
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
|
||||
if (apply_amd_register_a_behavior())
|
||||
CMOS_WRITE((save_freq_select & ~RTC_AMD_BANK_SELECT), RTC_FREQ_SELECT);
|
||||
else
|
||||
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
|
||||
}
|
||||
|
||||
|
|
|
@ -86,6 +86,8 @@ struct cmos_rtc_board_info {
|
|||
/* 2 values for divider stage reset, others for "testing purposes only" */
|
||||
# define RTC_DIV_RESET1 0x60
|
||||
# define RTC_DIV_RESET2 0x70
|
||||
/* In AMD BKDG bit 5 and 6 are reserved, bit 4 is for select dv0 bank */
|
||||
# define RTC_AMD_BANK_SELECT 0x10
|
||||
/* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
|
||||
# define RTC_RATE_SELECT 0x0F
|
||||
|
||||
|
|
Loading…
Reference in New Issue