402 lines
9.0 KiB
C
402 lines
9.0 KiB
C
/*
|
|
* itg3200_core.c -- support InvenSense ITG3200
|
|
* Digital 3-Axis Gyroscope driver
|
|
*
|
|
* Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
|
|
* Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
|
|
* Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* TODO:
|
|
* - Support digital low pass filter
|
|
* - Support power management
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
#include <linux/iio/gyro/itg3200.h>
|
|
|
|
|
|
int itg3200_write_reg_8(struct iio_dev *indio_dev,
|
|
u8 reg_address, u8 val)
|
|
{
|
|
struct itg3200 *st = iio_priv(indio_dev);
|
|
|
|
return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val);
|
|
}
|
|
|
|
int itg3200_read_reg_8(struct iio_dev *indio_dev,
|
|
u8 reg_address, u8 *val)
|
|
{
|
|
struct itg3200 *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(st->i2c, reg_address);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return 0;
|
|
}
|
|
|
|
static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address,
|
|
int *val)
|
|
{
|
|
struct itg3200 *st = iio_priv(indio_dev);
|
|
struct i2c_client *client = st->i2c;
|
|
int ret;
|
|
s16 out;
|
|
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = client->flags,
|
|
.len = 1,
|
|
.buf = (char *)&lower_reg_address,
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = client->flags | I2C_M_RD,
|
|
.len = 2,
|
|
.buf = (char *)&out,
|
|
},
|
|
};
|
|
|
|
lower_reg_address |= 0x80;
|
|
ret = i2c_transfer(client->adapter, msg, 2);
|
|
be16_to_cpus(&out);
|
|
*val = out;
|
|
|
|
return (ret == 2) ? 0 : ret;
|
|
}
|
|
|
|
static int itg3200_read_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
int *val, int *val2, long info)
|
|
{
|
|
int ret = 0;
|
|
u8 reg;
|
|
u8 regval;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
reg = (u8)chan->address;
|
|
ret = itg3200_read_reg_s16(indio_dev, reg, val);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
if (chan->type == IIO_TEMP)
|
|
*val2 = 1000000000/280;
|
|
else
|
|
*val2 = 1214142; /* (1 / 14,375) * (PI / 180) */
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
/* Only the temperature channel has an offset */
|
|
*val = 23000;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, ®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = (regval & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
|
|
|
|
ret = itg3200_read_reg_8(indio_dev,
|
|
ITG3200_REG_SAMPLE_RATE_DIV,
|
|
®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val /= regval + 1;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int itg3200_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
int ret;
|
|
u8 t;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val == 0 || val2 != 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
|
|
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
|
|
if (ret) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
}
|
|
t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
|
|
|
|
ret = itg3200_write_reg_8(indio_dev,
|
|
ITG3200_REG_SAMPLE_RATE_DIV,
|
|
t);
|
|
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset device and internal registers to the power-up-default settings
|
|
* Use the gyro clock as reference, as suggested by the datasheet
|
|
*/
|
|
static int itg3200_reset(struct iio_dev *indio_dev)
|
|
{
|
|
struct itg3200 *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
dev_dbg(&st->i2c->dev, "reset device");
|
|
|
|
ret = itg3200_write_reg_8(indio_dev,
|
|
ITG3200_REG_POWER_MANAGEMENT,
|
|
ITG3200_RESET);
|
|
if (ret) {
|
|
dev_err(&st->i2c->dev, "error resetting device");
|
|
goto error_ret;
|
|
}
|
|
|
|
/* Wait for PLL (1ms according to datasheet) */
|
|
udelay(1500);
|
|
|
|
ret = itg3200_write_reg_8(indio_dev,
|
|
ITG3200_REG_IRQ_CONFIG,
|
|
ITG3200_IRQ_ACTIVE_HIGH |
|
|
ITG3200_IRQ_PUSH_PULL |
|
|
ITG3200_IRQ_LATCH_50US_PULSE |
|
|
ITG3200_IRQ_LATCH_CLEAR_ANY);
|
|
|
|
if (ret)
|
|
dev_err(&st->i2c->dev, "error init device");
|
|
|
|
error_ret:
|
|
return ret;
|
|
}
|
|
|
|
/* itg3200_enable_full_scale() - Disables the digital low pass filter */
|
|
static int itg3200_enable_full_scale(struct iio_dev *indio_dev)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
|
|
if (ret)
|
|
goto err_ret;
|
|
|
|
val |= ITG3200_DLPF_FS_SEL_2000;
|
|
return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val);
|
|
|
|
err_ret:
|
|
return ret;
|
|
}
|
|
|
|
static int itg3200_initial_setup(struct iio_dev *indio_dev)
|
|
{
|
|
struct itg3200 *st = iio_priv(indio_dev);
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = itg3200_reset(indio_dev);
|
|
if (ret)
|
|
goto err_ret;
|
|
|
|
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
|
|
if (ret)
|
|
goto err_ret;
|
|
|
|
if (((val >> 1) & 0x3f) != 0x34) {
|
|
dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val);
|
|
ret = -ENXIO;
|
|
goto err_ret;
|
|
}
|
|
|
|
ret = itg3200_enable_full_scale(indio_dev);
|
|
err_ret:
|
|
return ret;
|
|
}
|
|
|
|
#define ITG3200_ST \
|
|
{ .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE }
|
|
|
|
#define ITG3200_GYRO_CHAN(_mod) { \
|
|
.type = IIO_ANGL_VEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_ ## _mod, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
|
|
.scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
|
|
.scan_type = ITG3200_ST, \
|
|
}
|
|
|
|
static const struct iio_chan_spec itg3200_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.channel2 = IIO_NO_MOD,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
|
.address = ITG3200_REG_TEMP_OUT_H,
|
|
.scan_index = ITG3200_SCAN_TEMP,
|
|
.scan_type = ITG3200_ST,
|
|
},
|
|
ITG3200_GYRO_CHAN(X),
|
|
ITG3200_GYRO_CHAN(Y),
|
|
ITG3200_GYRO_CHAN(Z),
|
|
IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
|
|
};
|
|
|
|
static const struct iio_info itg3200_info = {
|
|
.read_raw = &itg3200_read_raw,
|
|
.write_raw = &itg3200_write_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 };
|
|
|
|
static int itg3200_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct itg3200 *st;
|
|
struct iio_dev *indio_dev;
|
|
|
|
dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq);
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
st->i2c = client;
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->name = client->dev.driver->name;
|
|
indio_dev->channels = itg3200_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(itg3200_channels);
|
|
indio_dev->available_scan_masks = itg3200_available_scan_masks;
|
|
indio_dev->info = &itg3200_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = itg3200_buffer_configure(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (client->irq) {
|
|
ret = itg3200_probe_trigger(indio_dev);
|
|
if (ret)
|
|
goto error_unconfigure_buffer;
|
|
}
|
|
|
|
ret = itg3200_initial_setup(indio_dev);
|
|
if (ret)
|
|
goto error_remove_trigger;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_remove_trigger;
|
|
|
|
return 0;
|
|
|
|
error_remove_trigger:
|
|
if (client->irq)
|
|
itg3200_remove_trigger(indio_dev);
|
|
error_unconfigure_buffer:
|
|
itg3200_buffer_unconfigure(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int itg3200_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
if (client->irq)
|
|
itg3200_remove_trigger(indio_dev);
|
|
|
|
itg3200_buffer_unconfigure(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused itg3200_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct itg3200 *st = iio_priv(indio_dev);
|
|
|
|
dev_dbg(&st->i2c->dev, "suspend device");
|
|
|
|
return itg3200_write_reg_8(indio_dev, ITG3200_REG_POWER_MANAGEMENT,
|
|
ITG3200_SLEEP);
|
|
}
|
|
|
|
static int __maybe_unused itg3200_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
|
return itg3200_initial_setup(indio_dev);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(itg3200_pm_ops, itg3200_suspend, itg3200_resume);
|
|
|
|
static const struct i2c_device_id itg3200_id[] = {
|
|
{ "itg3200", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, itg3200_id);
|
|
|
|
static const struct of_device_id itg3200_of_match[] = {
|
|
{ .compatible = "invensense,itg3200" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, itg3200_of_match);
|
|
|
|
static struct i2c_driver itg3200_driver = {
|
|
.driver = {
|
|
.name = "itg3200",
|
|
.of_match_table = itg3200_of_match,
|
|
.pm = &itg3200_pm_ops,
|
|
},
|
|
.id_table = itg3200_id,
|
|
.probe = itg3200_probe,
|
|
.remove = itg3200_remove,
|
|
};
|
|
|
|
module_i2c_driver(itg3200_driver);
|
|
|
|
MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>");
|
|
MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver");
|
|
MODULE_LICENSE("GPL v2");
|