549 lines
15 KiB
C
549 lines
15 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Parts of this file are based on Ralink's 2.6.21 BSP
|
|
*
|
|
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/mach-ralink/ralink_regs.h>
|
|
#include <asm/mach-ralink/mt7620.h>
|
|
#include <asm/mach-ralink/pinmux.h>
|
|
|
|
#include "common.h"
|
|
|
|
/* analog */
|
|
#define PMU0_CFG 0x88
|
|
#define PMU_SW_SET BIT(28)
|
|
#define A_DCDC_EN BIT(24)
|
|
#define A_SSC_PERI BIT(19)
|
|
#define A_SSC_GEN BIT(18)
|
|
#define A_SSC_M 0x3
|
|
#define A_SSC_S 16
|
|
#define A_DLY_M 0x7
|
|
#define A_DLY_S 8
|
|
#define A_VTUNE_M 0xff
|
|
|
|
/* digital */
|
|
#define PMU1_CFG 0x8C
|
|
#define DIG_SW_SEL BIT(25)
|
|
|
|
/* is this a MT7620 or a MT7628 */
|
|
enum mt762x_soc_type mt762x_soc;
|
|
|
|
/* does the board have sdram or ddram */
|
|
static int dram_type;
|
|
|
|
static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
|
|
static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
|
|
static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
|
|
static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
|
|
static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
|
|
static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
|
|
static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
|
|
static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
|
|
static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
|
|
static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
|
|
static struct rt2880_pmx_func uartf_grp[] = {
|
|
FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
|
|
FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
|
|
FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
|
|
FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
|
|
FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
|
|
FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
|
|
FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
|
|
};
|
|
static struct rt2880_pmx_func wdt_grp[] = {
|
|
FUNC("wdt rst", 0, 17, 1),
|
|
FUNC("wdt refclk", 0, 17, 1),
|
|
};
|
|
static struct rt2880_pmx_func pcie_rst_grp[] = {
|
|
FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
|
|
FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
|
|
};
|
|
static struct rt2880_pmx_func nd_sd_grp[] = {
|
|
FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
|
|
FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
|
|
};
|
|
|
|
static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
|
|
GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
|
|
GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
|
|
MT7620_GPIO_MODE_UART0_SHIFT),
|
|
GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
|
|
GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
|
|
GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
|
|
MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
|
|
GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
|
|
GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
|
|
GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
|
|
GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
|
|
MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
|
|
GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
|
|
MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
|
|
GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
|
|
GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
|
|
GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
|
|
GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
|
|
{ 0 }
|
|
};
|
|
|
|
static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
|
|
FUNC("sdcx", 3, 19, 1),
|
|
FUNC("utif", 2, 19, 1),
|
|
FUNC("gpio", 1, 19, 1),
|
|
FUNC("pwm", 0, 19, 1),
|
|
};
|
|
|
|
static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
|
|
FUNC("sdcx", 3, 18, 1),
|
|
FUNC("utif", 2, 18, 1),
|
|
FUNC("gpio", 1, 18, 1),
|
|
FUNC("pwm", 0, 18, 1),
|
|
};
|
|
|
|
static struct rt2880_pmx_func uart2_grp_mt7628[] = {
|
|
FUNC("sdcx", 3, 20, 2),
|
|
FUNC("pwm", 2, 20, 2),
|
|
FUNC("gpio", 1, 20, 2),
|
|
FUNC("uart", 0, 20, 2),
|
|
};
|
|
|
|
static struct rt2880_pmx_func uart1_grp_mt7628[] = {
|
|
FUNC("sdcx", 3, 45, 2),
|
|
FUNC("pwm", 2, 45, 2),
|
|
FUNC("gpio", 1, 45, 2),
|
|
FUNC("uart", 0, 45, 2),
|
|
};
|
|
|
|
static struct rt2880_pmx_func i2c_grp_mt7628[] = {
|
|
FUNC("-", 3, 4, 2),
|
|
FUNC("debug", 2, 4, 2),
|
|
FUNC("gpio", 1, 4, 2),
|
|
FUNC("i2c", 0, 4, 2),
|
|
};
|
|
|
|
static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
|
|
static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
|
|
static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
|
|
static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
|
|
|
|
static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
|
|
FUNC("jtag", 3, 22, 8),
|
|
FUNC("utif", 2, 22, 8),
|
|
FUNC("gpio", 1, 22, 8),
|
|
FUNC("sdcx", 0, 22, 8),
|
|
};
|
|
|
|
static struct rt2880_pmx_func uart0_grp_mt7628[] = {
|
|
FUNC("-", 3, 12, 2),
|
|
FUNC("-", 2, 12, 2),
|
|
FUNC("gpio", 1, 12, 2),
|
|
FUNC("uart", 0, 12, 2),
|
|
};
|
|
|
|
static struct rt2880_pmx_func i2s_grp_mt7628[] = {
|
|
FUNC("antenna", 3, 0, 4),
|
|
FUNC("pcm", 2, 0, 4),
|
|
FUNC("gpio", 1, 0, 4),
|
|
FUNC("i2s", 0, 0, 4),
|
|
};
|
|
|
|
static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
|
|
FUNC("-", 3, 6, 1),
|
|
FUNC("refclk", 2, 6, 1),
|
|
FUNC("gpio", 1, 6, 1),
|
|
FUNC("spi", 0, 6, 1),
|
|
};
|
|
|
|
static struct rt2880_pmx_func spis_grp_mt7628[] = {
|
|
FUNC("pwm", 3, 14, 4),
|
|
FUNC("util", 2, 14, 4),
|
|
FUNC("gpio", 1, 14, 4),
|
|
FUNC("spis", 0, 14, 4),
|
|
};
|
|
|
|
static struct rt2880_pmx_func gpio_grp_mt7628[] = {
|
|
FUNC("pcie", 3, 11, 1),
|
|
FUNC("refclk", 2, 11, 1),
|
|
FUNC("gpio", 1, 11, 1),
|
|
FUNC("gpio", 0, 11, 1),
|
|
};
|
|
|
|
#define MT7628_GPIO_MODE_MASK 0x3
|
|
|
|
#define MT7628_GPIO_MODE_PWM1 30
|
|
#define MT7628_GPIO_MODE_PWM0 28
|
|
#define MT7628_GPIO_MODE_UART2 26
|
|
#define MT7628_GPIO_MODE_UART1 24
|
|
#define MT7628_GPIO_MODE_I2C 20
|
|
#define MT7628_GPIO_MODE_REFCLK 18
|
|
#define MT7628_GPIO_MODE_PERST 16
|
|
#define MT7628_GPIO_MODE_WDT 14
|
|
#define MT7628_GPIO_MODE_SPI 12
|
|
#define MT7628_GPIO_MODE_SDMODE 10
|
|
#define MT7628_GPIO_MODE_UART0 8
|
|
#define MT7628_GPIO_MODE_I2S 6
|
|
#define MT7628_GPIO_MODE_CS1 4
|
|
#define MT7628_GPIO_MODE_SPIS 2
|
|
#define MT7628_GPIO_MODE_GPIO 0
|
|
|
|
static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
|
|
GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_PWM1),
|
|
GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_PWM0),
|
|
GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_UART2),
|
|
GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_UART1),
|
|
GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_I2C),
|
|
GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
|
|
GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
|
|
GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
|
|
GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
|
|
GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_SDMODE),
|
|
GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_UART0),
|
|
GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_I2S),
|
|
GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_CS1),
|
|
GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_SPIS),
|
|
GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
|
|
1, MT7628_GPIO_MODE_GPIO),
|
|
{ 0 }
|
|
};
|
|
|
|
static __init u32
|
|
mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
|
|
{
|
|
u64 t;
|
|
|
|
t = ref_rate;
|
|
t *= mul;
|
|
do_div(t, div);
|
|
|
|
return t;
|
|
}
|
|
|
|
#define MHZ(x) ((x) * 1000 * 1000)
|
|
|
|
static __init unsigned long
|
|
mt7620_get_xtal_rate(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
|
|
if (reg & SYSCFG0_XTAL_FREQ_SEL)
|
|
return MHZ(40);
|
|
|
|
return MHZ(20);
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_periph_rate(unsigned long xtal_rate)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
|
|
if (reg & CLKCFG0_PERI_CLK_SEL)
|
|
return xtal_rate;
|
|
|
|
return MHZ(40);
|
|
}
|
|
|
|
static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
|
|
|
|
static __init unsigned long
|
|
mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
|
|
{
|
|
u32 reg;
|
|
u32 mul;
|
|
u32 div;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
|
|
if (reg & CPLL_CFG0_BYPASS_REF_CLK)
|
|
return xtal_rate;
|
|
|
|
if ((reg & CPLL_CFG0_SW_CFG) == 0)
|
|
return MHZ(600);
|
|
|
|
mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
|
|
CPLL_CFG0_PLL_MULT_RATIO_MASK;
|
|
mul += 24;
|
|
if (reg & CPLL_CFG0_LC_CURFCK)
|
|
mul *= 2;
|
|
|
|
div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
|
|
CPLL_CFG0_PLL_DIV_RATIO_MASK;
|
|
|
|
WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
|
|
|
|
return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
|
|
if (reg & CPLL_CFG1_CPU_AUX1)
|
|
return xtal_rate;
|
|
|
|
if (reg & CPLL_CFG1_CPU_AUX0)
|
|
return MHZ(480);
|
|
|
|
return cpu_pll_rate;
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_cpu_rate(unsigned long pll_rate)
|
|
{
|
|
u32 reg;
|
|
u32 mul;
|
|
u32 div;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
|
|
|
|
mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
|
|
div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
|
|
CPU_SYS_CLKCFG_CPU_FDIV_MASK;
|
|
|
|
return mt7620_calc_rate(pll_rate, mul, div);
|
|
}
|
|
|
|
static const u32 mt7620_ocp_dividers[16] __initconst = {
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
|
|
};
|
|
|
|
static __init unsigned long
|
|
mt7620_get_dram_rate(unsigned long pll_rate)
|
|
{
|
|
if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
|
|
return pll_rate / 4;
|
|
|
|
return pll_rate / 3;
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_sys_rate(unsigned long cpu_rate)
|
|
{
|
|
u32 reg;
|
|
u32 ocp_ratio;
|
|
u32 div;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
|
|
|
|
ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
|
|
CPU_SYS_CLKCFG_OCP_RATIO_MASK;
|
|
|
|
if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
|
|
return cpu_rate;
|
|
|
|
div = mt7620_ocp_dividers[ocp_ratio];
|
|
if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
|
|
return cpu_rate;
|
|
|
|
return cpu_rate / div;
|
|
}
|
|
|
|
void __init ralink_clk_init(void)
|
|
{
|
|
unsigned long xtal_rate;
|
|
unsigned long cpu_pll_rate;
|
|
unsigned long pll_rate;
|
|
unsigned long cpu_rate;
|
|
unsigned long sys_rate;
|
|
unsigned long dram_rate;
|
|
unsigned long periph_rate;
|
|
|
|
xtal_rate = mt7620_get_xtal_rate();
|
|
|
|
#define RFMT(label) label ":%lu.%03luMHz "
|
|
#define RINT(x) ((x) / 1000000)
|
|
#define RFRAC(x) (((x) / 1000) % 1000)
|
|
|
|
if (mt762x_soc == MT762X_SOC_MT7628AN) {
|
|
if (xtal_rate == MHZ(40))
|
|
cpu_rate = MHZ(580);
|
|
else
|
|
cpu_rate = MHZ(575);
|
|
dram_rate = sys_rate = cpu_rate / 3;
|
|
periph_rate = MHZ(40);
|
|
|
|
ralink_clk_add("10000d00.uartlite", periph_rate);
|
|
ralink_clk_add("10000e00.uartlite", periph_rate);
|
|
} else {
|
|
cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
|
|
pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
|
|
|
|
cpu_rate = mt7620_get_cpu_rate(pll_rate);
|
|
dram_rate = mt7620_get_dram_rate(pll_rate);
|
|
sys_rate = mt7620_get_sys_rate(cpu_rate);
|
|
periph_rate = mt7620_get_periph_rate(xtal_rate);
|
|
|
|
pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
|
|
RINT(xtal_rate), RFRAC(xtal_rate),
|
|
RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
|
|
RINT(pll_rate), RFRAC(pll_rate));
|
|
|
|
ralink_clk_add("10000500.uart", periph_rate);
|
|
}
|
|
|
|
pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
|
|
RINT(cpu_rate), RFRAC(cpu_rate),
|
|
RINT(dram_rate), RFRAC(dram_rate),
|
|
RINT(sys_rate), RFRAC(sys_rate),
|
|
RINT(periph_rate), RFRAC(periph_rate));
|
|
#undef RFRAC
|
|
#undef RINT
|
|
#undef RFMT
|
|
|
|
ralink_clk_add("cpu", cpu_rate);
|
|
ralink_clk_add("10000100.timer", periph_rate);
|
|
ralink_clk_add("10000120.watchdog", periph_rate);
|
|
ralink_clk_add("10000b00.spi", sys_rate);
|
|
ralink_clk_add("10000c00.uartlite", periph_rate);
|
|
ralink_clk_add("10180000.wmac", xtal_rate);
|
|
}
|
|
|
|
void __init ralink_of_remap(void)
|
|
{
|
|
rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
|
|
rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
|
|
|
|
if (!rt_sysc_membase || !rt_memc_membase)
|
|
panic("Failed to remap core resources");
|
|
}
|
|
|
|
static __init void
|
|
mt7620_dram_init(struct ralink_soc_info *soc_info)
|
|
{
|
|
switch (dram_type) {
|
|
case SYSCFG0_DRAM_TYPE_SDRAM:
|
|
pr_info("Board has SDRAM\n");
|
|
soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
|
|
break;
|
|
|
|
case SYSCFG0_DRAM_TYPE_DDR1:
|
|
pr_info("Board has DDR1\n");
|
|
soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
|
|
break;
|
|
|
|
case SYSCFG0_DRAM_TYPE_DDR2:
|
|
pr_info("Board has DDR2\n");
|
|
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static __init void
|
|
mt7628_dram_init(struct ralink_soc_info *soc_info)
|
|
{
|
|
switch (dram_type) {
|
|
case SYSCFG0_DRAM_TYPE_DDR1_MT7628:
|
|
pr_info("Board has DDR1\n");
|
|
soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
|
|
break;
|
|
|
|
case SYSCFG0_DRAM_TYPE_DDR2_MT7628:
|
|
pr_info("Board has DDR2\n");
|
|
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
void prom_soc_init(struct ralink_soc_info *soc_info)
|
|
{
|
|
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
|
|
unsigned char *name = NULL;
|
|
u32 n0;
|
|
u32 n1;
|
|
u32 rev;
|
|
u32 cfg0;
|
|
u32 pmu0;
|
|
u32 pmu1;
|
|
u32 bga;
|
|
|
|
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
|
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
|
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
|
|
bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
|
|
|
|
if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
|
|
if (bga) {
|
|
mt762x_soc = MT762X_SOC_MT7620A;
|
|
name = "MT7620A";
|
|
soc_info->compatible = "ralink,mt7620a-soc";
|
|
} else {
|
|
mt762x_soc = MT762X_SOC_MT7620N;
|
|
name = "MT7620N";
|
|
soc_info->compatible = "ralink,mt7620n-soc";
|
|
#ifdef CONFIG_PCI
|
|
panic("mt7620n is only supported for non pci kernels");
|
|
#endif
|
|
}
|
|
} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
|
|
mt762x_soc = MT762X_SOC_MT7628AN;
|
|
name = "MT7628AN";
|
|
soc_info->compatible = "ralink,mt7628an-soc";
|
|
} else {
|
|
panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
|
|
}
|
|
|
|
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
|
"Ralink %s ver:%u eco:%u",
|
|
name,
|
|
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
|
|
(rev & CHIP_REV_ECO_MASK));
|
|
|
|
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
|
|
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
|
|
|
|
soc_info->mem_base = MT7620_DRAM_BASE;
|
|
if (mt762x_soc == MT762X_SOC_MT7628AN)
|
|
mt7628_dram_init(soc_info);
|
|
else
|
|
mt7620_dram_init(soc_info);
|
|
|
|
pmu0 = __raw_readl(sysc + PMU0_CFG);
|
|
pmu1 = __raw_readl(sysc + PMU1_CFG);
|
|
|
|
pr_info("Analog PMU set to %s control\n",
|
|
(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
|
|
pr_info("Digital PMU set to %s control\n",
|
|
(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
|
|
|
|
if (mt762x_soc == MT762X_SOC_MT7628AN)
|
|
rt2880_pinmux_data = mt7628an_pinmux_data;
|
|
else
|
|
rt2880_pinmux_data = mt7620a_pinmux_data;
|
|
}
|