OpenCloudOS-Kernel/arch/arm/boot/dts
Lothar Waßmann ff04b40152 ARM: dts: mxs: add pinctrl header files
Remove the list of possible pin configurations from the documentation
file and create header files containing those definitions.
This eliminates the need for error-prone manual lookup of those values
in the documentation and guarantees consistency between the human
readable representation of the pad function in the .dts file and the
actual binary value used in DT.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26 13:01:36 +08:00
..
include kbuild: create an "include chroot" for DT bindings 2013-04-05 12:22:32 -06:00
testcases
Makefile ARM: dts: am335x-bone*: add DT for BeagleBone Black 2013-09-17 14:56:22 +02:00
aks-cdu.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
am33xx.dtsi usb: usb: dsps: update code according to the binding document 2013-08-27 14:18:32 -05:00
am43x-epos-evm.dts ARM: dts: AM43x EPOS EVM support 2013-06-19 05:40:55 -05:00
am335x-bone-common.dtsi ARM: dts: am335x-bone*: add DT for BeagleBone Black 2013-09-17 14:56:22 +02:00
am335x-bone.dts ARM: dts: am335x-bone*: add DT for BeagleBone Black 2013-09-17 14:56:22 +02:00
am335x-boneblack.dts ARM: dts: am335x-bone*: add DT for BeagleBone Black 2013-09-17 14:56:22 +02:00
am335x-evm.dts usb: musb: am335x-evm: Do not remove the session bit HOST-only mode 2013-08-27 14:18:41 -05:00
am335x-evmsk.dts pwm: Changes for v3.12-rc1 2013-09-03 21:15:23 -07:00
am3517-evm.dts ARM: dts: AM3XXX: Use #include for all device trees 2013-06-18 18:53:41 -05:00
am3517_mt_ventoux.dts ARM: dts: AM3XXX: Use #include for all device trees 2013-06-18 18:53:41 -05:00
am4372.dtsi ARM: dts: AM43x: Initial support 2013-06-18 18:53:41 -05:00
animeo_ip.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
armada-370-db.dts ARM: mvebu: Add BootROM to Armada 370/XP device tree 2013-08-06 14:11:20 +00:00
armada-370-mirabox.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-370-netgear-rn102.dts ARM: mvebu: use dts pre-processor for readynas 102 2013-08-16 13:02:10 +00:00
armada-370-rd.dts ARM: mvebu: Relocate PCIe node in Armada 370 RD board 2013-08-09 13:17:17 +00:00
armada-370-xp.dtsi mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
armada-370.dtsi mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
armada-xp-axpwifiap.dts ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding 2013-08-07 20:05:05 +00:00
armada-xp-db.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-xp-gp.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-xp-mv78230.dtsi mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
armada-xp-mv78260.dtsi mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
armada-xp-mv78460.dtsi mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes 2013-08-06 14:11:27 +00:00
armada-xp.dtsi mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
at91-ariag25.dts ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled 2013-05-31 16:42:27 +02:00
at91-foxg20.dts ARM: at91: switch Fox G20 board .dts to pre-processor defines 2013-05-31 16:42:28 +02:00
at91rm9200.dtsi ARM: at91: at91rm9200: set default mmc0 pinctrl-names 2013-08-21 11:40:22 +02:00
at91rm9200_pqfp.dtsi ARM: at91/dt: add at91rm9200 PQFP package version 2013-08-21 12:18:52 +02:00
at91rm9200ek.dts ARM: at91: dt: rm9200ek: add spi support 2013-06-26 10:13:39 +02:00
at91sam9g15.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g15ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g20.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g20ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
at91sam9g20ek_2mmc.dts ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
at91sam9g20ek_common.dtsi ARM: at91/dts: add the watchdog nodes for at91 boards 2013-05-31 21:54:50 +02:00
at91sam9g25.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g25ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g35.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g35ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9g45.dtsi Again some nice DT updates for AT91: 2013-06-14 18:51:21 -07:00
at91sam9m10g45ek.dts ARM: at91: sam9m10g45ek add udc DT support 2013-06-15 00:15:22 +02:00
at91sam9n12.dtsi ARM: at91: at91sam9n12: add pinctrl of TWI 2013-08-21 11:28:13 +02:00
at91sam9n12ek.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
at91sam9x5.dtsi ARM: at91/dt: sam9x5: add SSC DMA parameters 2013-08-21 13:31:27 +02:00
at91sam9x5cm.dtsi ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
at91sam9x5ek.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
at91sam9x25.dtsi ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
at91sam9x25ek.dts Adding the DT support to USB gadget High-Speed aka usba. 2013-06-14 18:58:28 -07:00
at91sam9x35.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9x35ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
at91sam9260.dtsi ARM: at91: at91sam9260: add missing pinctrl-names on mmc 2013-08-21 11:14:18 +02:00
at91sam9263.dtsi Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dt 2013-06-07 16:39:38 -07:00
at91sam9263ek.dts ARM: at91/dts: add the watchdog nodes for at91 boards 2013-05-31 21:54:50 +02:00
atlas6-evb.dts ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board 2013-03-18 17:15:33 +01:00
atlas6.dtsi Linux 3.11-rc7 2013-08-29 09:46:30 +02:00
bcm2835-rpi-b.dts ARM: bcm2835: Add Raspberry Pi's ACT LED to DT 2013-05-16 20:29:48 -06:00
bcm2835.dtsi ARM: bcm2835: override the HW UART periphid 2013-06-02 11:50:41 -07:00
bcm11351-brt.dts ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20 10:47:47 -07:00
bcm11351.dtsi ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20 10:47:47 -07:00
bcm28155-ap.dts ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) 2013-08-20 10:47:47 -07:00
cros5250-common.dtsi ARM: dts: change compatible strings for EXYNOS5250 hdmi subsystem 2013-06-28 21:13:57 +09:00
da850-enbw-cmc.dts ARM: davinci: da850: Use #include for all device trees 2013-06-20 15:04:30 +05:30
da850-evm.dts ARM: davinci: da850: add DT node for ethernet 2013-08-22 00:44:58 +05:30
da850.dtsi ARM: davinci: da850: do not specify clock_frequency for UART DT node 2013-08-22 00:44:58 +05:30
dove-cm-a510.dts
dove-cubox.dts ARM: dove: add GPIO IR receiver node to SolidRun CuBox 2013-08-12 21:03:49 +00:00
dove-d2plug.dts ARM: dove: add initial DT file for Globalscale D2Plug 2013-08-12 21:03:50 +00:00
dove-dove-db.dts
dove.dtsi ARM: dove: add cpu device tree node 2013-08-12 21:03:46 +00:00
ea3250.dts
ecx-2000.dts
ecx-common.dtsi sata highbank: add bit-banged SGPIO driver support 2013-06-06 14:05:24 -07:00
elpida_ecb240abacn.dtsi
emev2-kzm9d-reference.dts ARM: shmobile: kzm9d: remove nfsroot settings from bootargs 2013-08-06 18:07:13 +09:00
emev2-kzm9d.dts ARM: shmobile: kzm9d: remove nfsroot settings from bootargs 2013-08-06 18:07:13 +09:00
emev2.dtsi ARM: shmobile: emev2: add PMU information to emev2.dtsi 2013-07-31 15:31:16 +09:00
ethernut5.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
evk-pro3.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
exynos4.dtsi The common clk framework changes for 3.12 are dominated by clock driver 2013-09-09 15:49:04 -07:00
exynos4x12-pinctrl.dtsi ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals 2013-08-06 02:49:43 +09:00
exynos4x12.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
exynos5.dtsi ARM: dts: Fix the RTC DT node name for Exynos5250 2013-08-26 02:28:05 +09:00
exynos4210-origen.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes 2013-08-07 01:08:24 +09:00
exynos4210-smdkv310.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4210-trats.dts ARM: dts: Add S5K5BA sensor regulator definitions for Trats board 2013-08-07 01:08:25 +09:00
exynos4210-universal_c210.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4210.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
exynos4212.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4412-odroidx.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4412-origen.dts ARM: dts: Add secure-firmware boot support for OrigenQaud board 2013-08-19 04:30:16 +09:00
exynos4412-smdk4412.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos4412-trats2.dts ARM: dts: Add SPI1 controller and s5c73m3 sensor node for TRATS2 2013-08-07 01:07:57 +09:00
exynos4412.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos5250-arndale.dts ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC 2013-08-26 02:28:05 +09:00
exynos5250-pinctrl.dtsi ARM SoC device tree changes 2013-07-02 14:23:01 -07:00
exynos5250-smdk5250.dts ARM: dts: Update DP controller DT Node for Exynos5 based SoCs 2013-08-19 01:56:30 +09:00
exynos5250-snow.dts ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC 2013-08-26 02:28:05 +09:00
exynos5250.dtsi ARM: SoC late changes for v3.12 2013-09-09 16:35:29 -07:00
exynos5420-pinctrl.dtsi ARM: dts: Add pin state information for DP HPD support to Exynos5420 2013-08-19 01:56:31 +09:00
exynos5420-smdk5420.dts ARM: dts: Add pin state information for DP HPD support to Exynos5420 2013-08-19 01:56:31 +09:00
exynos5420.dtsi ARM: SoC late changes for v3.12 2013-09-09 16:35:29 -07:00
exynos5440-sd5v1.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
exynos5440-ssdk5440.dts ARM SoC driver specific changes 2013-07-02 14:33:21 -07:00
exynos5440.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
ge863-pro3.dtsi ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
highbank.dts cpufreq / highbank: add support for highbank cpufreq 2013-02-02 00:01:15 +01:00
imx6dl-pinfunc.h ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-sabreauto.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-sabresd.dts ARM: dts: imx: share pad macro names between imx6q and imx6dl 2013-08-22 23:29:11 +08:00
imx6dl-wandboard.dts ARM: dts: imx6: Add support for imx6q wandboard 2013-08-22 23:29:28 +08:00
imx6dl.dtsi ARM: dts: imx: ocram size is different between imx6q and imx6dl 2013-08-22 23:29:44 +08:00
imx6q-arm2.dts ARM: dts: imx6qdl/imx6sl: add the dma property for uart 2013-08-22 23:29:16 +08:00
imx6q-phytec-pbab01.dts ARM: dts: Phytec imx6q pfla02 and pbab01 support 2013-06-17 16:04:31 +08:00
imx6q-phytec-pfla02.dtsi ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module 2013-08-22 23:29:50 +08:00
imx6q-pinfunc.h ARM: dts: imx6q: fix the wrong offset of the Pad Mux register 2013-09-17 10:04:25 +08:00
imx6q-sabreauto.dts ARM: dtsi: enable ahci sata on imx6q platforms 2013-08-22 23:29:25 +08:00
imx6q-sabrelite.dts ARM: dts: imx6q-sabrelite: Add LVDS support 2013-09-26 13:01:32 +08:00
imx6q-sabresd.dts ARM: dtsi: enable ahci sata on imx6q platforms 2013-08-22 23:29:25 +08:00
imx6q-sbc6x.dts ARM: dts: MicroSys sbc6x support (i.MX6) 2013-04-09 22:53:37 +08:00
imx6q-wandboard.dts ARM: dts: imx6q-wandboard: Add sata support 2013-08-22 23:29:30 +08:00
imx6q.dtsi ARM: dts: imx: ocram size is different between imx6q and imx6dl 2013-08-22 23:29:44 +08:00
imx6qdl-sabreauto.dtsi ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3 2013-09-26 13:01:35 +08:00
imx6qdl-sabresd.dtsi ARM: dts: imx6qdl-sabresd: SDHC ports are 8 bit-wide 2013-09-26 13:01:35 +08:00
imx6qdl-wandboard.dtsi ARM: imx6qdl-wandboard: Add spdif support 2013-09-26 13:01:33 +08:00
imx6qdl.dtsi ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3 2013-09-26 13:01:35 +08:00
imx6sl-evk.dts ARM: imx: mx6sl-evk: Enable USB function 2013-09-26 13:01:34 +08:00
imx6sl-pinfunc.h pinctrl: add pinctrl driver for imx6sl 2013-04-09 22:53:38 +08:00
imx6sl.dtsi ARM: dts: imx6sl: Add spi aliases 2013-09-26 13:01:34 +08:00
imx23-evk.dts ARM: dts: imx23-evk: enable Low Resolution ADC 2013-08-16 16:26:45 +08:00
imx23-olinuxino.dts ARM: dts: imx23-olinuxino: enable Low Resolution ADC 2013-08-16 16:26:47 +08:00
imx23-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx23-stmp378x_devb.dts
imx23.dtsi ARM: dts: mxs: Add spi alias 2013-08-16 16:26:48 +08:00
imx25-karo-tx25.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx25-pdk.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx25.dtsi ARM: dts: imx25: Make lcdc compatible to imx21 fb 2013-08-22 23:29:15 +08:00
imx27-apf27.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx27-apf27dev.dts ARM: apf27dev: add rtc ds1374 to the device tree 2013-08-22 23:28:16 +08:00
imx27-pdk.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx27-phytec-phycard-s-rdk.dts ARM: dts: imx27 phyCARD-S, i2c ADC device node 2013-08-22 23:29:05 +08:00
imx27-phytec-phycard-s-som.dts ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk 2013-08-22 23:29:03 +08:00
imx27-phytec-phycore-rdk.dts ARM: dts: imx27-phytec-phycore-rdk: Add CAN node 2013-08-22 23:28:56 +08:00
imx27-phytec-phycore-som.dts ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX 2013-08-22 23:29:57 +08:00
imx27.dtsi ARM: imx27.dtsi: fix CSPI PER clock id 2013-09-17 10:04:23 +08:00
imx28-apf28.dts
imx28-apf28dev.dts ARM: dts: apf28dev: Add touchscreen support for APF28dev 2013-06-17 15:43:29 +08:00
imx28-apx4devkit.dts ARM: mxs: saif0 is the clock provider to sgtl5000 2013-07-15 08:28:09 +08:00
imx28-cfa10036.dts ARM: mxs: dt: cfa10036: make hogpins grabbed by respective drivers 2013-08-16 16:26:41 +08:00
imx28-cfa10037.dts ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers 2013-08-16 16:26:36 +08:00
imx28-cfa10049.dts ARM: mxs: dt: cfa10049: make hogpins grabbed by respective drivers 2013-08-16 16:26:37 +08:00
imx28-cfa10055.dts ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers 2013-08-16 16:26:39 +08:00
imx28-cfa10056.dts ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree 2013-08-16 16:26:34 +08:00
imx28-cfa10057.dts ARM: mxs: dt: cfa10057: remove hogpins 2013-08-16 16:26:40 +08:00
imx28-cfa10058.dts ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree 2013-08-16 16:26:35 +08:00
imx28-evk.dts ARM: dts: imx28-evk: Enable touchscreen support 2013-09-26 13:01:35 +08:00
imx28-m28evk.dts ARM: mxs: Add backlight support for M28EVK 2013-08-16 16:26:42 +08:00
imx28-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
imx28-sps1.dts ARM: mxs: Slow down the I2C clock speed 2013-04-03 09:34:01 +08:00
imx28-tx28.dts
imx28.dtsi ARM: dts: imx28-evk: Allow usb peripheral mode to work 2013-09-26 13:01:31 +08:00
imx31-bug.dts ARM: imx: use #include for all device trees 2013-04-09 22:52:49 +08:00
imx31.dtsi ARM: dts: imx: Add the missing cpus node 2013-08-22 23:29:01 +08:00
imx35-pinfunc.h pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx51-apf51.dts ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template 2013-08-22 23:29:53 +08:00
imx51-apf51dev.dts ARM: imx: apf51dev: add ecspi1, ecspi2 and i2c2 support 2013-04-09 22:52:54 +08:00
imx51-babbage.dts ARM: dts: i.MX51: Separate TXD/RXD and RTS/CTS pinmux entries for UARTs 2013-09-26 13:01:30 +08:00
imx51-pinfunc.h pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx51.dtsi ARM: dts: i.MX51: Add W1 devicetree node 2013-09-26 13:01:31 +08:00
imx53-ard.dts pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx53-evk.dts pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx53-m53evk.dts ARM: mx5: Add support for DENX M53EVK 2013-06-17 16:04:16 +08:00
imx53-mba53.dts ARM i.MX53: mba53: Fix PWM backlight DT node 2013-07-15 08:28:10 +08:00
imx53-pinfunc.h ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration 2013-04-09 22:53:37 +08:00
imx53-qsb.dts ARM: dts: imx53-qsb: Allow usb peripheral mode to work 2013-09-26 13:01:32 +08:00
imx53-smd.dts pinctrl: imx: move hard-coding data into device tree 2013-04-09 22:52:50 +08:00
imx53-tqma53.dtsi ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2 2013-06-17 16:04:26 +08:00
imx53-tx53.dtsi ARM: dts: add Ka-Ro tx53 devicetree 2013-06-17 16:04:18 +08:00
imx53.dtsi ARM: imx: add ocram clock for imx53 2013-08-22 23:29:46 +08:00
integrator.dtsi
integratorap.dts ARM: integrator: set local side PCI addresses right 2013-06-27 14:19:12 +02:00
integratorcp.dts ARM: integrator-cp: convert use CLKSRC_OF for timer init 2013-04-11 15:11:21 -05:00
keystone.dts ARM: Keystone: Convert device tree file to use IRQ defines 2013-08-05 14:06:24 -04:00
kirkwood-98dx4122.dtsi
kirkwood-6281.dtsi ARM: kirkwood: Relocate PCIe device tree nodes 2013-08-06 14:11:53 +00:00
kirkwood-6282.dtsi ARM: kirkwood: Relocate PCIe device tree nodes 2013-08-06 14:11:53 +00:00
kirkwood-cloudbox.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-db-88f6281.dts ARM: kirkwood: Relocate PCIe device tree nodes 2013-08-06 14:11:53 +00:00
kirkwood-db-88f6282.dts ARM: kirkwood: Relocate PCIe device tree nodes 2013-08-06 14:11:53 +00:00
kirkwood-db.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-dns320.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-dns325.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-dnskw.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-dockstar.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-dreamplug.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-goflexnet.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-guruplug-server-plus.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ib62x0.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-iconnect.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-iomega_ix2_200.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-is2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-km_kirkwood.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-lschlv2.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxhl.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-lsxl.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-mplcec4.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-mv88f6281gtw-ge.dts ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge 2013-08-06 16:14:14 +00:00
kirkwood-netgear_readynas_duo_v2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2-common.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2lite.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2max.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ns2mini.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-nsa310-common.dtsi ARM: kirkwood: use dts pre-processor for nsa310 boards 2013-08-16 13:02:08 +00:00
kirkwood-nsa310.dts mvebu dt changes for v3.12 2013-08-29 10:01:40 -07:00
kirkwood-nsa310a.dts ARM: kirkwood: use dts pre-processor for nsa310 boards 2013-08-16 13:02:08 +00:00
kirkwood-openblocks_a6.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-sheevaplug-common.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-sheevaplug-esata.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-sheevaplug.dts ARM: kirkwood: Use the preprocessor on device tree files 2013-08-06 14:11:37 +00:00
kirkwood-topkick.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ts219-6281.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ts219-6282.dts ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood-ts219.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kirkwood.dtsi ARM: SoC board updates for 3.12 2013-09-06 13:34:43 -07:00
kizbox.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
lpc32xx.dtsi ARM: dts: lpc32xx: cpus/cpu nodes dts updates 2013-05-23 10:45:13 +01:00
marco-evb.dts
marco.dtsi
mmp2-brownstone.dts mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
mmp2.dtsi ARM: mmp: add more compatible names in gpio driver 2013-04-11 10:00:34 +08:00
mpa1600.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
msm8660-surf.dts ARM: dts: msm: Update uartdm compatible strings 2013-08-28 16:03:29 -07:00
msm8960-cdp.dts TTY/Serial driver patches for 3.12-rc1 2013-09-03 11:38:36 -07:00
mxs-pinfunc.h ARM: dts: mxs: add pinctrl header files 2013-09-26 13:01:36 +08:00
nspire-classic.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-clp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-cx.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire-tp.dts arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
nspire.dtsi arm: Add device trees for TI-Nspire hardware 2013-06-21 20:06:29 +02:00
omap2.dtsi Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt 2013-06-20 23:01:41 +02:00
omap3-beagle-xm.dts ARM: dts: omap3-beagle-xm: fix string error in compatible property 2013-09-17 14:20:57 +02:00
omap3-beagle.dts ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line 2013-06-18 18:53:45 -05:00
omap3-devkit8000.dts Device tree updates for v3.11 2013-07-04 15:51:45 -07:00
omap3-evm.dts ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line 2013-06-18 18:53:45 -05:00
omap3-igep.dtsi ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 2013-09-18 14:31:58 +02:00
omap3-igep0020.dts ARM: dts: OMAP2+: Use existing constants for GPIOs 2013-06-18 18:53:38 -05:00
omap3-igep0030.dts ARM: dts: OMAP2+: Use existing constants for GPIOs 2013-06-18 18:53:38 -05:00
omap3-overo.dtsi ARM: dts: omap3-overo: Add default trigger for TWL4030 LED 2013-06-19 04:38:15 -05:00
omap3-tobi.dts ARM: dts: omap3-tobi: Correct polarity for GPIO LED 2013-06-19 04:38:14 -05:00
omap3.dtsi Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt 2013-06-20 23:01:41 +02:00
omap4-panda-a4.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-panda-common.dtsi ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard 2013-09-18 11:11:39 +02:00
omap4-panda-es.dts ARM: dts: omap4-panda: Update the LED support for the panda 2013-06-18 18:53:40 -05:00
omap4-panda.dts ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap4-sdp-es23plus.dts ARM: dts: OMAP2+: Use pinctrl constants 2013-06-18 18:53:40 -05:00
omap4-sdp.dts ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze 2013-09-18 11:14:42 +02:00
omap4-var-som.dts ARM: dts: OMAP4/5: Use existing constants for IRQs 2013-06-18 18:53:39 -05:00
omap4.dtsi Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt 2013-06-20 23:01:41 +02:00
omap5-uevm.dts ARM: dts: omap5-uevm: update optional/unused regulator configurations 2013-07-29 23:43:20 -07:00
omap5.dtsi ARM: dts: OMAP5: fix ocp2scp DTS data 2013-09-17 14:57:04 +02:00
omap34xx.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap36xx.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap443x.dtsi ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices 2013-06-18 18:53:46 -05:00
omap2420-h4.dts ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap2420.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap2430.dtsi ARM: dts: OMAP2+: Use #include for all device trees 2013-06-18 18:53:38 -05:00
omap3430-sdp.dts ARM SoC driver specific changes 2013-07-02 14:33:21 -07:00
omap4460.dtsi ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices 2013-06-18 18:53:46 -05:00
orion5x-lacie-ethernet-disk-mini-v2.dts ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes 2013-07-25 20:54:10 +00:00
orion5x.dtsi ARM: orion5x: update intc device tree node to new reg layout 2013-07-25 21:07:09 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi ARM: dts: picoxcell: cpus/cpu nodes dts updates 2013-05-23 10:45:15 +01:00
picoxcell-pc3x3.dtsi ARM: dts: picoxcell: cpus/cpu nodes dts updates 2013-05-23 10:45:15 +01:00
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
prima2-evb.dts
prima2.dtsi arm/dts: sirf: fix the pingroup name mismatch between drivers and dts 2013-07-22 00:53:32 +02:00
pxa2xx.dtsi ARM: dts: pxa2xx: cpus/cpu nodes dts updates 2013-05-23 10:45:17 +01:00
pxa3xx.dtsi ARM: pxa: DTS: override gpio node in pxa3xx.dtsi 2013-08-13 15:51:02 -07:00
pxa27x.dtsi
pxa168-aspenite.dts
pxa168.dtsi ARM: mmp: add more compatible names in gpio driver 2013-04-11 10:00:34 +08:00
pxa910-dkb.dts
pxa910.dtsi ARM: mmp: add more compatible names in gpio driver 2013-04-11 10:00:34 +08:00
r8a73a4-ape6evm-reference.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a73a4-ape6evm.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a73a4.dtsi Renesas ARM based SoC pinmux updates for v3.12 2013-08-14 00:24:05 -07:00
r8a7740-armadillo800eva-reference.dts ARM: Renesas SoC cleanup, refactoring and more SMP support 2013-09-09 16:33:57 -07:00
r8a7740-armadillo800eva.dts ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs 2013-08-06 18:07:13 +09:00
r8a7740.dtsi ARM: Renesas SoC cleanup, refactoring and more SMP support 2013-09-09 16:33:57 -07:00
r8a7778-bockw-reference.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a7778-bockw.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a7778.dtsi ARM: shmobile: r8a7778: Add GPIO controller devices to device tree 2013-07-22 10:12:33 +09:00
r8a7779-marzen-reference.dts ARM: Renesas SoC cleanup, refactoring and more SMP support 2013-09-09 16:33:57 -07:00
r8a7779-marzen.dts ARM: shmobile: marzen: Add r8a7779-marzen.dtb 2013-07-30 13:27:56 +09:00
r8a7779.dtsi ARM: Renesas SoC cleanup, refactoring and more SMP support 2013-09-09 16:33:57 -07:00
r8a7790-lager-reference.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
r8a7790-lager.dts ARM: shmobile: lager: enable nfsroot in DTS 2013-08-06 18:06:20 +09:00
r8a7790.dtsi Renesas ARM based SoC pinmux updates for v3.12 2013-08-14 00:24:05 -07:00
rk3066a-clocks.dtsi arm: Add basic clocks for Rockchip rk3066a SoCs 2013-06-21 09:20:56 +02:00
rk3066a.dtsi arm: add basic support for Rockchip RK3066a boards 2013-06-21 09:21:02 +02:00
s3c24xx.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
s3c2416-pinctrl.dtsi ARM: dts: add devicetree support for s3c2416-smdk2416 2013-05-21 01:06:12 +09:00
s3c2416-smdk2416.dts ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
s3c2416.dtsi ARM: dts: use #include for all device trees for Samsung 2013-06-19 03:28:40 +09:00
sama5d3.dtsi ARM: at91/dt: sama5d3xek: reduce the ROM code mapping for pmecc lookup table 2013-08-23 14:47:22 +08:00
sama5d3xcm.dtsi ARM: at91/dt: sama5d3xek: remove the useless NFC dt parameters 2013-08-23 14:46:38 +08:00
sama5d3xdm.dtsi ARM: at91: dt: switch to pinctrl to pre-processor 2013-05-17 12:11:39 +02:00
sama5d3xmb.dtsi ARM: at91/dt: fix phy address in sama5xmb to match the reg property 2013-08-29 15:21:45 -04:00
sama5d31ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
sama5d33ek.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
sama5d34ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
sama5d35ek.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g-reference.dts ARM: Renesas SoC cleanup, refactoring and more SMP support 2013-09-09 16:33:57 -07:00
sh73a0-kzm9g.dts ARM: shmobile: Mount root file systems in r/w mode for all DT platforms 2013-08-05 16:45:33 +09:00
sh73a0.dtsi ARM: Renesas SoC cleanup, refactoring and more SMP support 2013-09-09 16:33:57 -07:00
sh7372-mackerel.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh7372.dtsi ARM: shmobile: sh7372: Add pin control device to device tree 2013-07-22 10:12:36 +09:00
skeleton.dtsi
skeleton64.dtsi ARM: dts: Fix memory node in skeleton64.dtsi 2013-08-07 16:33:50 +00:00
socfpga.dtsi dts: Rename DW APB timer compatible strings 2013-08-29 12:59:02 -07:00
socfpga_cyclone5.dts ARM: socfpga: dts: Add ethernet bindings for SOCFPGA 2013-06-11 16:34:57 -07:00
socfpga_vt.dts ARM: socfpga: dts: Add ethernet bindings for SOCFPGA 2013-06-11 16:34:57 -07:00
spear3xx.dtsi ARM: dts: spear: cpus/cpu nodes dts updates 2013-05-23 10:45:21 +01:00
spear13xx.dtsi ARM: dts: spear: cpus/cpu nodes dts updates 2013-05-23 10:45:21 +01:00
spear300-evb.dts
spear300.dtsi
spear310-evb.dts
spear310.dtsi gpio: add gpio offset in gpio range cells property 2013-03-07 05:27:29 +01:00
spear320-evb.dts
spear320-hmi.dts
spear320.dtsi gpio: add gpio offset in gpio range cells property 2013-03-07 05:27:29 +01:00
spear600-evb.dts
spear600.dtsi ARM: dts: spear: cpus/cpu nodes dts updates 2013-05-23 10:45:21 +01:00
spear1310-evb.dts
spear1310.dtsi gpio: add gpio offset in gpio range cells property 2013-03-07 05:27:29 +01:00
spear1340-evb.dts
spear1340.dtsi ARM: arm-soc: late cleanups 2013-05-07 11:22:14 -07:00
st-pincfg.h ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
ste-ccu8540-pinctrl.dtsi ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-ccu8540.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-ccu9540.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-dbx5x0.dtsi ARM: ux500: Apply a ste-* prefix onto dbx5x0.dtsi 2013-08-07 15:35:50 +02:00
ste-href.dtsi ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-hrefprev60.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-hrefv60plus.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-nomadik-pinctrl.dtsi ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2 2013-08-06 23:48:50 +02:00
ste-nomadik-s8815.dts Nomadik DT and clock work: 2013-06-20 16:13:10 +02:00
ste-nomadik-stn8815.dtsi ARM: nomadik: switch to use the Nomadik I2C driver 2013-08-07 00:59:06 +02:00
ste-snowball.dts ARM: ux500: fix devicetree builds 2013-08-14 22:32:07 +02:00
ste-stuib.dtsi ARM: ux500: Apply a ste-* prefix onto stuib.dtsi 2013-08-07 15:35:24 +02:00
ste-u300.dts ARM: u300: switch to using syscon regmap for board 2013-06-17 13:54:39 +02:00
stih41x-b2000.dtsi ARM: stih41x: Add B2000 board support 2013-06-25 13:42:50 -07:00
stih41x-b2020.dtsi ARM: stih41x: Add B2020 board support 2013-06-25 13:42:51 -07:00
stih41x.dtsi ARM: STi: Fix cpu nodes with correct device_type. 2013-08-04 13:40:48 -07:00
stih415-b2000.dts ARM: stih41x: Add B2000 board support 2013-06-25 13:42:50 -07:00
stih415-b2020.dts ARM: stih41x: Add B2020 board support 2013-06-25 13:42:51 -07:00
stih415-clock.dtsi ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
stih415-pinctrl.dtsi ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
stih415.dtsi ARM: sti: Add STiH415 SOC support 2013-06-25 13:26:47 -07:00
stih416-b2000.dts ARM: stih41x: Add B2000 board support 2013-06-25 13:42:50 -07:00
stih416-b2020.dts ARM: stih41x: Add B2020 board support 2013-06-25 13:42:51 -07:00
stih416-clock.dtsi ARM: sti: Add STiH416 SOC support 2013-06-25 13:26:58 -07:00
stih416-pinctrl.dtsi ARM: dts: STi: Fix pinconf setup for STiH416 serial2 2013-07-22 19:34:55 -07:00
stih416.dtsi ARM: dts: STi: Fix pinconf setup for STiH416 serial2 2013-07-22 19:34:55 -07:00
sun4i-a10-a1000.dts ARM: sunxi: dt: Add device tree for Mele A1000 2013-08-14 09:59:20 +02:00
sun4i-a10-cubieboard.dts ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun4i-a10-hackberry.dts ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun4i-a10-mini-xplus.dts ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun4i-a10.dtsi ARM: sun4i: dt: Fix A10 SoC bus base address 2013-08-10 19:13:43 +02:00
sun5i-a10s-olinuxino-micro.dts ARM: sun5i: dt: Fix A10s SoC bus base address 2013-08-10 19:13:44 +02:00
sun5i-a10s.dtsi ARM: sun5i: dt: Use the A10s gates in the DTSI 2013-08-26 10:51:18 +02:00
sun5i-a13-olinuxino.dts ARM: sun5i: dt: Fix A13 SoC bus base address 2013-08-10 19:13:45 +02:00
sun5i-a13.dtsi ARM: sun5i: dt: Fix A13 SoC bus base address 2013-08-10 19:13:45 +02:00
sun6i-a31-colombus.dts ARM: sun6i: colombus: Add uart0 muxing 2013-08-22 00:19:17 +02:00
sun6i-a31.dtsi ARM: sun6i: Enable clock support in the DTSI 2013-08-26 10:51:18 +02:00
sun7i-a20-cubieboard2.dts ARM: dts: sun7i: cubieboard2: Enable the EMAC 2013-09-12 12:22:43 -07:00
sun7i-a20-olinuxino-micro.dts ARM: dts: sun7i: olinuxino-micro: Enable the EMAC 2013-09-12 12:22:48 -07:00
sun7i-a20.dtsi ARM: dts: sun7i: Add the muxing options for the EMAC 2013-09-12 12:22:39 -07:00
tegra20-colibri-512.dtsi ARM: tegra: device tree changes for 3.12 2013-08-20 16:30:54 -07:00
tegra20-harmony.dts ARM: tegra: harmony: Initialize PCIe from DT 2013-08-12 14:19:21 -06:00
tegra20-iris-512.dts ARM: tegra: convert device tree files to use GPIO defines 2013-05-28 16:13:49 -06:00
tegra20-medcom-wide.dts ARM: tegra20: convert device tree files to use CLK defines 2013-05-28 16:13:50 -06:00
tegra20-paz00.dts ARM: tegra: enable LP1 suspend mode 2013-08-12 12:23:14 -06:00
tegra20-plutux.dts ARM: tegra20: convert device tree files to use CLK defines 2013-05-28 16:13:50 -06:00
tegra20-seaboard.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra20-tamonten.dtsi ARM: tegra: tamonten: Add PCIe support 2013-08-12 14:19:12 -06:00
tegra20-tec.dts ARM: tegra: tec: Add PCIe support 2013-08-12 14:19:16 -06:00
tegra20-trimslice.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra20-ventana.dts ARM: tegra: enable LP1 suspend mode 2013-08-12 12:23:14 -06:00
tegra20-whistler.dts ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra20.dtsi ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
tegra30-beaver.dts ARM: tegra: add Mic Jack to Beaver device tree 2013-08-15 09:35:07 -06:00
tegra30-cardhu-a02.dts ARM: tegra: convert device tree files to use GPIO defines 2013-05-28 16:13:49 -06:00
tegra30-cardhu-a04.dts ARM: tegra: convert device tree files to use GPIO defines 2013-05-28 16:13:49 -06:00
tegra30-cardhu.dtsi ARM: tegra: add USB DT entries for Tegra30 2013-08-13 12:40:47 -06:00
tegra30.dtsi ARM: tegra: add USB DT entries for Tegra30 2013-08-13 12:40:47 -06:00
tegra114-dalmore.dts ARM: tegra: configure power off for Dalmore 2013-08-20 16:52:04 -07:00
tegra114.dtsi ARM: tegra: add USB DT entries for Tegra114, Dalmore 2013-08-13 12:40:52 -06:00
tny_a9g20.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
tny_a9260.dts ARM: at91: dt: use #include for all device trees 2013-05-17 11:27:49 +02:00
tny_a9260_common.dtsi
tny_a9263.dts ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
tps6507x.dtsi ARM: regulator: add tps6507x device tree data 2013-04-03 09:44:51 +05:30
tps65217.dtsi
tps65910.dtsi
twl4030.dtsi ARM: dts: Add missing vmmc2 regulator for twl 2013-07-15 01:04:05 -07:00
twl4030_omap3.dtsi ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line 2013-06-18 18:53:45 -05:00
twl6030.dtsi ARM: dts: twl6030: Add PWM support 2013-04-09 00:16:50 +02:00
usb_a9g20-dab-mmx.dtsi ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
usb_a9g20.dts ARM: at91: dt: add Calao USB-A9G20 low power version 2013-05-31 16:52:37 +02:00
usb_a9g20_common.dtsi ARM: at91: dt: add Calao USB-A9G20 low power version 2013-05-31 16:52:37 +02:00
usb_a9g20_lpw.dts ARM: at91: dt: add Calao USB-A9G20 low power version 2013-05-31 16:52:37 +02:00
usb_a9260.dts ARM: at91: dt: usb-a9260: update shutdown controller 2013-05-31 16:52:35 +02:00
usb_a9260_common.dtsi ARM: at91: dt: switch to standard GPIO flag defines. 2013-05-17 11:27:49 +02:00
usb_a9263.dts ARM: at91: dt: usb-a9263: add dataflash support 2013-05-31 16:52:36 +02:00
versatile-ab.dts ARM: versatile: use OF init for sp804 timer 2013-04-11 15:11:21 -05:00
versatile-pb.dts
vexpress-v2m-rs1.dtsi
vexpress-v2m.dtsi
vexpress-v2p-ca5s.dts ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms 2013-04-11 03:01:03 -07:00
vexpress-v2p-ca9.dts ARM: dts: vexpress: disable CA9 core tile sp804 timer 2013-04-11 15:11:19 -05:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms 2013-04-11 03:01:03 -07:00
vexpress-v2p-ca15_a7.dts ARM: SoC late changes for v3.12 2013-09-09 16:35:29 -07:00
vf610-pinfunc.h ARM: dts: add SoC level device tree source for VF610 2013-06-17 16:04:23 +08:00
vf610-twr.dts ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081a 2013-09-26 13:01:33 +08:00
vf610.dtsi ARM: dts: vf610: Add DSPI nodes 2013-09-26 13:01:33 +08:00
vt8500-bv07.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
vt8500.dtsi dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8505-ref.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8505.dtsi dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files 2013-05-12 20:31:15 +12:00
wm8650-mid.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8650.dtsi dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files 2013-05-12 20:31:15 +12:00
wm8750-apc8750.dts dts: vt8500: Update serial nodes and disable by default in SoC files 2013-05-12 20:31:13 +12:00
wm8750.dtsi dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files 2013-05-12 20:31:15 +12:00
wm8850-w70v2.dts ARM: dts: Use the PWM polarity flags 2013-09-03 13:08:11 +02:00
wm8850.dtsi dts: vt8500: Correct reference clock on WM8850 SoCs 2013-06-04 07:31:22 +12:00
xenvm-4.2.dts xenvm: add a simple PSCI node and a second cpu 2013-04-25 16:46:09 +00:00
zynq-7000.dtsi arm: zynq: dt: Set correct L2 ram latencies 2013-08-13 16:37:35 +02:00
zynq-zc702.dts arm: dt: zynq: Use 'status' property for UART nodes 2013-06-17 10:32:39 +02:00
zynq-zc706.dts arm: dt: zynq: Add support for the zc706 platform 2013-06-17 10:32:51 +02:00
zynq-zed.dts arm: dt: zynq: Add support for the zed platform 2013-06-17 10:33:03 +02:00