350 lines
9.0 KiB
C
350 lines
9.0 KiB
C
/*
|
|
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
|
|
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
|
|
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
|
|
*
|
|
* Inspired by an earlier effort from David S. Miller <davem@redhat.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define DRV_NAME "ns87415"
|
|
|
|
#ifdef CONFIG_SUPERIO
|
|
/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
|
|
* Unfortunately, it's built-in on all Astro-based PA-RISC workstations
|
|
* which use the integrated NS87514 cell for CD-ROM support.
|
|
* i.e we have to support for CD-ROM installs.
|
|
* See drivers/parisc/superio.c for more gory details.
|
|
*/
|
|
#include <asm/superio.h>
|
|
|
|
#define SUPERIO_IDE_MAX_RETRIES 25
|
|
|
|
/* Because of a defect in Super I/O, all reads of the PCI DMA status
|
|
* registers, IDE status register and the IDE select register need to be
|
|
* retried
|
|
*/
|
|
static u8 superio_ide_inb (unsigned long port)
|
|
{
|
|
u8 tmp;
|
|
int retries = SUPERIO_IDE_MAX_RETRIES;
|
|
|
|
/* printk(" [ reading port 0x%x with retry ] ", port); */
|
|
|
|
do {
|
|
tmp = inb(port);
|
|
if (tmp == 0)
|
|
udelay(50);
|
|
} while (tmp == 0 && retries-- > 0);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static u8 superio_read_status(ide_hwif_t *hwif)
|
|
{
|
|
return superio_ide_inb(hwif->io_ports.status_addr);
|
|
}
|
|
|
|
static u8 superio_dma_sff_read_status(ide_hwif_t *hwif)
|
|
{
|
|
return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
|
|
}
|
|
|
|
static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf,
|
|
u8 valid)
|
|
{
|
|
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
|
|
|
|
if (valid & IDE_VALID_ERROR)
|
|
tf->error = inb(io_ports->feature_addr);
|
|
if (valid & IDE_VALID_NSECT)
|
|
tf->nsect = inb(io_ports->nsect_addr);
|
|
if (valid & IDE_VALID_LBAL)
|
|
tf->lbal = inb(io_ports->lbal_addr);
|
|
if (valid & IDE_VALID_LBAM)
|
|
tf->lbam = inb(io_ports->lbam_addr);
|
|
if (valid & IDE_VALID_LBAH)
|
|
tf->lbah = inb(io_ports->lbah_addr);
|
|
if (valid & IDE_VALID_DEVICE)
|
|
tf->device = superio_ide_inb(io_ports->device_addr);
|
|
}
|
|
|
|
static void ns87415_dev_select(ide_drive_t *drive);
|
|
|
|
static const struct ide_tp_ops superio_tp_ops = {
|
|
.exec_command = ide_exec_command,
|
|
.read_status = superio_read_status,
|
|
.read_altstatus = ide_read_altstatus,
|
|
.write_devctl = ide_write_devctl,
|
|
|
|
.dev_select = ns87415_dev_select,
|
|
.tf_load = ide_tf_load,
|
|
.tf_read = superio_tf_read,
|
|
|
|
.input_data = ide_input_data,
|
|
.output_data = ide_output_data,
|
|
};
|
|
|
|
static void __devinit superio_init_iops(struct hwif_s *hwif)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(hwif->dev);
|
|
u32 dma_stat;
|
|
u8 port = hwif->channel, tmp;
|
|
|
|
dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
|
|
|
|
/* Clear error/interrupt, enable dma */
|
|
tmp = superio_ide_inb(dma_stat);
|
|
outb(tmp | 0x66, dma_stat);
|
|
}
|
|
#else
|
|
#define superio_dma_sff_read_status ide_dma_sff_read_status
|
|
#endif
|
|
|
|
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
|
|
|
|
/*
|
|
* This routine either enables/disables (according to IDE_DFLAG_PRESENT)
|
|
* the IRQ associated with the port,
|
|
* and selects either PIO or DMA handshaking for the next I/O operation.
|
|
*/
|
|
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
new = *old;
|
|
|
|
/* Adjust IRQ enable bit */
|
|
bit = 1 << (8 + hwif->channel);
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_PRESENT)
|
|
new &= ~bit;
|
|
else
|
|
new |= bit;
|
|
|
|
/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
|
|
bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
|
|
other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
|
|
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
|
|
|
|
if (new != *old) {
|
|
unsigned char stat;
|
|
|
|
/*
|
|
* Don't change DMA engine settings while Write Buffers
|
|
* are busy.
|
|
*/
|
|
(void) pci_read_config_byte(dev, 0x43, &stat);
|
|
while (stat & 0x03) {
|
|
udelay(1);
|
|
(void) pci_read_config_byte(dev, 0x43, &stat);
|
|
}
|
|
|
|
*old = new;
|
|
(void) pci_write_config_dword(dev, 0x40, new);
|
|
|
|
/*
|
|
* And let things settle...
|
|
*/
|
|
udelay(10);
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void ns87415_dev_select(ide_drive_t *drive)
|
|
{
|
|
ns87415_prepare_drive(drive,
|
|
!!(drive->dev_flags & IDE_DFLAG_USING_DMA));
|
|
|
|
outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
|
|
}
|
|
|
|
static void ns87415_dma_start(ide_drive_t *drive)
|
|
{
|
|
ns87415_prepare_drive(drive, 1);
|
|
ide_dma_start(drive);
|
|
}
|
|
|
|
static int ns87415_dma_end(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 dma_stat = 0, dma_cmd = 0;
|
|
|
|
dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
|
|
/* get DMA command mode */
|
|
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
|
|
/* stop DMA */
|
|
outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
|
|
/* from ERRATA: clear the INTR & ERROR bits */
|
|
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
|
|
outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
|
|
|
|
ns87415_prepare_drive(drive, 0);
|
|
|
|
/* verify good DMA status */
|
|
return (dma_stat & 7) != 4;
|
|
}
|
|
|
|
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
unsigned int ctrl, using_inta;
|
|
u8 progif;
|
|
#ifdef __sparc_v9__
|
|
int timeout;
|
|
u8 stat;
|
|
#endif
|
|
|
|
/*
|
|
* We cannot probe for IRQ: both ports share common IRQ on INTA.
|
|
* Also, leave IRQ masked during drive probing, to prevent infinite
|
|
* interrupts from a potentially floating INTA..
|
|
*
|
|
* IRQs get unmasked in dev_select() when drive is first used.
|
|
*/
|
|
(void) pci_read_config_dword(dev, 0x40, &ctrl);
|
|
(void) pci_read_config_byte(dev, 0x09, &progif);
|
|
/* is irq in "native" mode? */
|
|
using_inta = progif & (1 << (hwif->channel << 1));
|
|
if (!using_inta)
|
|
using_inta = ctrl & (1 << (4 + hwif->channel));
|
|
if (hwif->mate) {
|
|
hwif->select_data = hwif->mate->select_data;
|
|
} else {
|
|
hwif->select_data = (unsigned long)
|
|
&ns87415_control[ns87415_count++];
|
|
ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
|
|
if (using_inta)
|
|
ctrl &= ~(1 << 6); /* unmask INTA */
|
|
*((unsigned int *)hwif->select_data) = ctrl;
|
|
(void) pci_write_config_dword(dev, 0x40, ctrl);
|
|
|
|
/*
|
|
* Set prefetch size to 512 bytes for both ports,
|
|
* but don't turn on/off prefetching here.
|
|
*/
|
|
pci_write_config_byte(dev, 0x55, 0xee);
|
|
|
|
#ifdef __sparc_v9__
|
|
/*
|
|
* XXX: Reset the device, if we don't it will not respond to
|
|
* dev_select() properly during first ide_probe_port().
|
|
*/
|
|
timeout = 10000;
|
|
outb(12, hwif->io_ports.ctl_addr);
|
|
udelay(10);
|
|
outb(8, hwif->io_ports.ctl_addr);
|
|
do {
|
|
udelay(50);
|
|
stat = hwif->tp_ops->read_status(hwif);
|
|
if (stat == 0xff)
|
|
break;
|
|
} while ((stat & ATA_BUSY) && --timeout);
|
|
#endif
|
|
}
|
|
|
|
if (!using_inta)
|
|
hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
|
|
|
|
if (!hwif->dma_base)
|
|
return;
|
|
|
|
outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
|
|
}
|
|
|
|
static const struct ide_tp_ops ns87415_tp_ops = {
|
|
.exec_command = ide_exec_command,
|
|
.read_status = ide_read_status,
|
|
.read_altstatus = ide_read_altstatus,
|
|
.write_devctl = ide_write_devctl,
|
|
|
|
.dev_select = ns87415_dev_select,
|
|
.tf_load = ide_tf_load,
|
|
.tf_read = ide_tf_read,
|
|
|
|
.input_data = ide_input_data,
|
|
.output_data = ide_output_data,
|
|
};
|
|
|
|
static const struct ide_dma_ops ns87415_dma_ops = {
|
|
.dma_host_set = ide_dma_host_set,
|
|
.dma_setup = ide_dma_setup,
|
|
.dma_start = ns87415_dma_start,
|
|
.dma_end = ns87415_dma_end,
|
|
.dma_test_irq = ide_dma_test_irq,
|
|
.dma_lost_irq = ide_dma_lost_irq,
|
|
.dma_timer_expiry = ide_dma_sff_timer_expiry,
|
|
.dma_sff_read_status = superio_dma_sff_read_status,
|
|
};
|
|
|
|
static const struct ide_port_info ns87415_chipset __devinitconst = {
|
|
.name = DRV_NAME,
|
|
.init_hwif = init_hwif_ns87415,
|
|
.tp_ops = &ns87415_tp_ops,
|
|
.dma_ops = &ns87415_dma_ops,
|
|
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
|
|
IDE_HFLAG_NO_ATAPI_DMA,
|
|
};
|
|
|
|
static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct ide_port_info d = ns87415_chipset;
|
|
|
|
#ifdef CONFIG_SUPERIO
|
|
if (PCI_SLOT(dev->devfn) == 0xE) {
|
|
/* Built-in - assume it's under superio. */
|
|
d.init_iops = superio_init_iops;
|
|
d.tp_ops = &superio_tp_ops;
|
|
}
|
|
#endif
|
|
return ide_pci_init_one(dev, &d, NULL);
|
|
}
|
|
|
|
static const struct pci_device_id ns87415_pci_tbl[] = {
|
|
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
|
|
|
|
static struct pci_driver ns87415_pci_driver = {
|
|
.name = "NS87415_IDE",
|
|
.id_table = ns87415_pci_tbl,
|
|
.probe = ns87415_init_one,
|
|
.remove = ide_pci_remove,
|
|
.suspend = ide_pci_suspend,
|
|
.resume = ide_pci_resume,
|
|
};
|
|
|
|
static int __init ns87415_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&ns87415_pci_driver);
|
|
}
|
|
|
|
static void __exit ns87415_ide_exit(void)
|
|
{
|
|
pci_unregister_driver(&ns87415_pci_driver);
|
|
}
|
|
|
|
module_init(ns87415_ide_init);
|
|
module_exit(ns87415_ide_exit);
|
|
|
|
MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
|
|
MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
|
|
MODULE_LICENSE("GPL");
|