526 lines
17 KiB
C
526 lines
17 KiB
C
/* atmdev.h - ATM device driver declarations and various related items */
|
|
|
|
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
|
|
|
|
|
|
#ifndef LINUX_ATMDEV_H
|
|
#define LINUX_ATMDEV_H
|
|
|
|
|
|
#include <linux/atmapi.h>
|
|
#include <linux/atm.h>
|
|
#include <linux/atmioc.h>
|
|
|
|
|
|
#define ESI_LEN 6
|
|
|
|
#define ATM_OC3_PCR (155520000/270*260/8/53)
|
|
/* OC3 link rate: 155520000 bps
|
|
SONET overhead: /270*260 (9 section, 1 path)
|
|
bits per cell: /8/53
|
|
max cell rate: 353207.547 cells/sec */
|
|
#define ATM_25_PCR ((25600000/8-8000)/54)
|
|
/* 25 Mbps ATM cell rate (59111) */
|
|
#define ATM_OC12_PCR (622080000/1080*1040/8/53)
|
|
/* OC12 link rate: 622080000 bps
|
|
SONET overhead: /1080*1040
|
|
bits per cell: /8/53
|
|
max cell rate: 1412830.188 cells/sec */
|
|
#define ATM_DS3_PCR (8000*12)
|
|
/* DS3: 12 cells in a 125 usec time slot */
|
|
|
|
|
|
#define __AAL_STAT_ITEMS \
|
|
__HANDLE_ITEM(tx); /* TX okay */ \
|
|
__HANDLE_ITEM(tx_err); /* TX errors */ \
|
|
__HANDLE_ITEM(rx); /* RX okay */ \
|
|
__HANDLE_ITEM(rx_err); /* RX errors */ \
|
|
__HANDLE_ITEM(rx_drop); /* RX out of memory */
|
|
|
|
struct atm_aal_stats {
|
|
#define __HANDLE_ITEM(i) int i
|
|
__AAL_STAT_ITEMS
|
|
#undef __HANDLE_ITEM
|
|
};
|
|
|
|
|
|
struct atm_dev_stats {
|
|
struct atm_aal_stats aal0;
|
|
struct atm_aal_stats aal34;
|
|
struct atm_aal_stats aal5;
|
|
} __ATM_API_ALIGN;
|
|
|
|
|
|
#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
|
|
/* get link rate */
|
|
#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
|
|
/* get interface names (numbers) */
|
|
#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
|
|
/* get interface type name */
|
|
#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
|
|
/* get interface ESI */
|
|
#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
|
|
/* get itf's local ATM addr. list */
|
|
#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
|
|
/* reset itf's ATM address list */
|
|
#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
|
|
/* add a local ATM address */
|
|
#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
|
|
/* remove a local ATM address */
|
|
#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
|
|
/* get connection identifier range */
|
|
#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
|
|
/* set connection identifier range */
|
|
#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
|
|
/* set interface ESI */
|
|
#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
|
|
/* force interface ESI */
|
|
#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
|
|
/* register a LECS address */
|
|
#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
|
|
/* unregister a LECS address */
|
|
#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
|
|
/* retrieve LECS address(es) */
|
|
|
|
#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
|
|
/* get AAL layer statistics */
|
|
#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
|
|
/* get AAL layer statistics and zero */
|
|
#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
|
|
/* get loopback mode */
|
|
#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
|
|
/* set loopback mode */
|
|
#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
|
|
/* query supported loopback modes */
|
|
#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
|
|
/* enable or disable single-copy */
|
|
#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
|
|
/* set backend handler */
|
|
#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
|
|
/* use backend to make new if */
|
|
#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
|
|
/* add party to p2mp call */
|
|
#ifdef CONFIG_COMPAT
|
|
/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
|
|
#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
|
|
#endif
|
|
#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
|
|
/* drop party from p2mp call */
|
|
|
|
/*
|
|
* These are backend handkers that can be set via the ATM_SETBACKEND call
|
|
* above. In the future we may support dynamic loading of these - for now,
|
|
* they're just being used to share the ATMIOC_BACKEND ioctls
|
|
*/
|
|
#define ATM_BACKEND_RAW 0
|
|
#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
|
|
#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
|
|
|
|
/* for ATM_GETTYPE */
|
|
#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
|
|
|
|
/*
|
|
* Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
|
|
*/
|
|
|
|
/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
|
|
#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
|
|
#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
|
|
#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
|
|
/* RESERVED 4 loop back on PHY side ---' */
|
|
#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
|
|
#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
|
|
|
|
/* Direction of loopback */
|
|
#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
|
|
#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
|
|
|
|
#define __ATM_LM_XTLOC(n) ((n) & 0xff)
|
|
#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
|
|
|
|
#define ATM_LM_NONE 0 /* no loopback */
|
|
|
|
#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
|
|
#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
|
|
#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
|
|
#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
|
|
|
|
#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
|
|
#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
|
|
#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
|
|
#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
|
|
|
|
/*
|
|
* Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
|
|
* __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
|
|
*/
|
|
|
|
|
|
struct atm_iobuf {
|
|
int length;
|
|
void __user *buffer;
|
|
};
|
|
|
|
/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
|
|
|
|
#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
|
|
|
|
struct atm_cirange {
|
|
signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
|
|
signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
|
|
};
|
|
|
|
/* for ATM_SETSC; actually taken from the ATM_VF number space */
|
|
|
|
#define ATM_SC_RX 1024 /* enable RX single-copy */
|
|
#define ATM_SC_TX 2048 /* enable TX single-copy */
|
|
|
|
#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
|
|
anyway */
|
|
|
|
/* MF: change_qos (Modify) flags */
|
|
|
|
#define ATM_MF_IMMED 1 /* Block until change is effective */
|
|
#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
|
|
#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
|
|
#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
|
|
#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
|
|
#define ATM_MF_BWD 32 /* Set the backward direction parameters */
|
|
|
|
#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
|
|
ATM_MF_DEC_SHP | ATM_MF_BWD)
|
|
|
|
/*
|
|
* ATM_VS_* are used to express VC state in a human-friendly way.
|
|
*/
|
|
|
|
#define ATM_VS_IDLE 0 /* VC is not used */
|
|
#define ATM_VS_CONNECTED 1 /* VC is connected */
|
|
#define ATM_VS_CLOSING 2 /* VC is closing */
|
|
#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
|
|
#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
|
|
#define ATM_VS_BOUND 5 /* VC is bound */
|
|
|
|
#define ATM_VS2TXT_MAP \
|
|
"IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
|
|
|
|
#define ATM_VF2TXT_MAP \
|
|
"ADDR", "READY", "PARTIAL", "REGIS", \
|
|
"RELEASED", "HASQOS", "LISTEN", "META", \
|
|
"256", "512", "1024", "2048", \
|
|
"SESSION", "HASSAP", "BOUND", "CLOSE"
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/wait.h> /* wait_queue_head_t */
|
|
#include <linux/time.h> /* struct timeval */
|
|
#include <linux/net.h>
|
|
#include <linux/skbuff.h> /* struct sk_buff */
|
|
#include <linux/uio.h>
|
|
#include <net/sock.h>
|
|
#include <linux/atomic.h>
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
#include <linux/proc_fs.h>
|
|
|
|
extern struct proc_dir_entry *atm_proc_root;
|
|
#endif
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
#include <linux/compat.h>
|
|
struct compat_atm_iobuf {
|
|
int length;
|
|
compat_uptr_t buffer;
|
|
};
|
|
#endif
|
|
|
|
struct k_atm_aal_stats {
|
|
#define __HANDLE_ITEM(i) atomic_t i
|
|
__AAL_STAT_ITEMS
|
|
#undef __HANDLE_ITEM
|
|
};
|
|
|
|
|
|
struct k_atm_dev_stats {
|
|
struct k_atm_aal_stats aal0;
|
|
struct k_atm_aal_stats aal34;
|
|
struct k_atm_aal_stats aal5;
|
|
};
|
|
|
|
|
|
enum {
|
|
ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared
|
|
by device driver. */
|
|
ATM_VF_READY, /* VC is ready to transfer data. Set by device
|
|
driver, cleared by anybody. */
|
|
ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC
|
|
setup), controlled by socket layer */
|
|
ATM_VF_REGIS, /* registered with demon, controlled by SVC
|
|
socket layer */
|
|
ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket
|
|
layer */
|
|
ATM_VF_RELEASED, /* demon has indicated/requested release,
|
|
controlled by SVC socket layer */
|
|
ATM_VF_HASQOS, /* QOS parameters have been set */
|
|
ATM_VF_LISTEN, /* socket is used for listening */
|
|
ATM_VF_META, /* SVC socket isn't used for normal data
|
|
traffic and doesn't depend on signaling
|
|
to be available */
|
|
ATM_VF_SESSION, /* VCC is p2mp session control descriptor */
|
|
ATM_VF_HASSAP, /* SAP has been set */
|
|
ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/
|
|
ATM_VF_WAITING, /* waiting for reply from sigd */
|
|
ATM_VF_IS_CLIP, /* in use by CLIP protocol */
|
|
};
|
|
|
|
|
|
#define ATM_VF2VS(flags) \
|
|
(test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
|
|
test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
|
|
test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
|
|
test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
|
|
test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
|
|
|
|
|
|
enum {
|
|
ATM_DF_REMOVED, /* device was removed from atm_devs list */
|
|
};
|
|
|
|
|
|
#define ATM_PHY_SIG_LOST 0 /* no carrier/light */
|
|
#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */
|
|
#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */
|
|
|
|
#define ATM_ATMOPT_CLP 1 /* set CLP bit */
|
|
|
|
struct atm_vcc {
|
|
/* struct sock has to be the first member of atm_vcc */
|
|
struct sock sk;
|
|
unsigned long flags; /* VCC flags (ATM_VF_*) */
|
|
short vpi; /* VPI and VCI (types must be equal */
|
|
/* with sockaddr) */
|
|
int vci;
|
|
unsigned long aal_options; /* AAL layer options */
|
|
unsigned long atm_options; /* ATM layer options */
|
|
struct atm_dev *dev; /* device back pointer */
|
|
struct atm_qos qos; /* QOS */
|
|
struct atm_sap sap; /* SAP */
|
|
void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
|
|
void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
|
|
int (*push_oam)(struct atm_vcc *vcc,void *cell);
|
|
int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
|
|
void *dev_data; /* per-device data */
|
|
void *proto_data; /* per-protocol data */
|
|
struct k_atm_aal_stats *stats; /* pointer to AAL stats group */
|
|
/* SVC part --- may move later ------------------------------------- */
|
|
short itf; /* interface number */
|
|
struct sockaddr_atmsvc local;
|
|
struct sockaddr_atmsvc remote;
|
|
/* Multipoint part ------------------------------------------------- */
|
|
struct atm_vcc *session; /* session VCC descriptor */
|
|
/* Other stuff ----------------------------------------------------- */
|
|
void *user_back; /* user backlink - not touched by */
|
|
/* native ATM stack. Currently used */
|
|
/* by CLIP and sch_atm. */
|
|
};
|
|
|
|
static inline struct atm_vcc *atm_sk(struct sock *sk)
|
|
{
|
|
return (struct atm_vcc *)sk;
|
|
}
|
|
|
|
static inline struct atm_vcc *ATM_SD(struct socket *sock)
|
|
{
|
|
return atm_sk(sock->sk);
|
|
}
|
|
|
|
static inline struct sock *sk_atm(struct atm_vcc *vcc)
|
|
{
|
|
return (struct sock *)vcc;
|
|
}
|
|
|
|
struct atm_dev_addr {
|
|
struct sockaddr_atmsvc addr; /* ATM address */
|
|
struct list_head entry; /* next address */
|
|
};
|
|
|
|
enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
|
|
|
|
struct atm_dev {
|
|
const struct atmdev_ops *ops; /* device operations; NULL if unused */
|
|
const struct atmphy_ops *phy; /* PHY operations, may be undefined */
|
|
/* (NULL) */
|
|
const char *type; /* device type name */
|
|
int number; /* device index */
|
|
void *dev_data; /* per-device data */
|
|
void *phy_data; /* private PHY date */
|
|
unsigned long flags; /* device flags (ATM_DF_*) */
|
|
struct list_head local; /* local ATM addresses */
|
|
struct list_head lecs; /* LECS ATM addresses learned via ILMI */
|
|
unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */
|
|
struct atm_cirange ci_range; /* VPI/VCI range */
|
|
struct k_atm_dev_stats stats; /* statistics */
|
|
char signal; /* signal status (ATM_PHY_SIG_*) */
|
|
int link_rate; /* link rate (default: OC3) */
|
|
atomic_t refcnt; /* reference count */
|
|
spinlock_t lock; /* protect internal members */
|
|
#ifdef CONFIG_PROC_FS
|
|
struct proc_dir_entry *proc_entry; /* proc entry */
|
|
char *proc_name; /* proc entry name */
|
|
#endif
|
|
struct device class_dev; /* sysfs device */
|
|
struct list_head dev_list; /* linkage */
|
|
};
|
|
|
|
|
|
/* OF: send_Oam Flags */
|
|
|
|
#define ATM_OF_IMMED 1 /* Attempt immediate delivery */
|
|
#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */
|
|
|
|
|
|
/*
|
|
* ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
|
|
*/
|
|
|
|
struct atmdev_ops { /* only send is required */
|
|
void (*dev_close)(struct atm_dev *dev);
|
|
int (*open)(struct atm_vcc *vcc);
|
|
void (*close)(struct atm_vcc *vcc);
|
|
int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
|
|
#ifdef CONFIG_COMPAT
|
|
int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
|
|
void __user *arg);
|
|
#endif
|
|
int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
|
|
void __user *optval,int optlen);
|
|
int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
|
|
void __user *optval,unsigned int optlen);
|
|
int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
|
|
int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
|
|
void (*phy_put)(struct atm_dev *dev,unsigned char value,
|
|
unsigned long addr);
|
|
unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
|
|
int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
|
|
int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
|
|
struct module *owner;
|
|
};
|
|
|
|
struct atmphy_ops {
|
|
int (*start)(struct atm_dev *dev);
|
|
int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
|
|
void (*interrupt)(struct atm_dev *dev);
|
|
int (*stop)(struct atm_dev *dev);
|
|
};
|
|
|
|
struct atm_skb_data {
|
|
struct atm_vcc *vcc; /* ATM VCC */
|
|
unsigned long atm_options; /* ATM layer options */
|
|
};
|
|
|
|
#define VCC_HTABLE_SIZE 32
|
|
|
|
extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
|
|
extern rwlock_t vcc_sklist_lock;
|
|
|
|
#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
|
|
|
|
struct atm_dev *atm_dev_register(const char *type, struct device *parent,
|
|
const struct atmdev_ops *ops,
|
|
int number, /* -1 == pick first available */
|
|
unsigned long *flags);
|
|
struct atm_dev *atm_dev_lookup(int number);
|
|
void atm_dev_deregister(struct atm_dev *dev);
|
|
|
|
/* atm_dev_signal_change
|
|
*
|
|
* Propagate lower layer signal change in atm_dev->signal to netdevice.
|
|
* The event will be sent via a notifier call chain.
|
|
*/
|
|
void atm_dev_signal_change(struct atm_dev *dev, char signal);
|
|
|
|
void vcc_insert_socket(struct sock *sk);
|
|
|
|
void atm_dev_release_vccs(struct atm_dev *dev);
|
|
|
|
|
|
static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
|
|
{
|
|
atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
|
|
}
|
|
|
|
|
|
static inline void atm_return(struct atm_vcc *vcc,int truesize)
|
|
{
|
|
atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
|
|
}
|
|
|
|
|
|
static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
|
|
{
|
|
return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
|
|
sk_atm(vcc)->sk_sndbuf;
|
|
}
|
|
|
|
|
|
static inline void atm_dev_hold(struct atm_dev *dev)
|
|
{
|
|
atomic_inc(&dev->refcnt);
|
|
}
|
|
|
|
|
|
static inline void atm_dev_put(struct atm_dev *dev)
|
|
{
|
|
if (atomic_dec_and_test(&dev->refcnt)) {
|
|
BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
|
|
if (dev->ops->dev_close)
|
|
dev->ops->dev_close(dev);
|
|
put_device(&dev->class_dev);
|
|
}
|
|
}
|
|
|
|
|
|
int atm_charge(struct atm_vcc *vcc,int truesize);
|
|
struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
|
|
gfp_t gfp_flags);
|
|
int atm_pcr_goal(const struct atm_trafprm *tp);
|
|
|
|
void vcc_release_async(struct atm_vcc *vcc, int reply);
|
|
|
|
struct atm_ioctl {
|
|
struct module *owner;
|
|
/* A module reference is kept if appropriate over this call.
|
|
* Return -ENOIOCTLCMD if you don't handle it. */
|
|
int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
|
|
struct list_head list;
|
|
};
|
|
|
|
/**
|
|
* register_atm_ioctl - register handler for ioctl operations
|
|
*
|
|
* Special (non-device) handlers of ioctl's should
|
|
* register here. If you're a normal device, you should
|
|
* set .ioctl in your atmdev_ops instead.
|
|
*/
|
|
void register_atm_ioctl(struct atm_ioctl *);
|
|
|
|
/**
|
|
* deregister_atm_ioctl - remove the ioctl handler
|
|
*/
|
|
void deregister_atm_ioctl(struct atm_ioctl *);
|
|
|
|
|
|
/* register_atmdevice_notifier - register atm_dev notify events
|
|
*
|
|
* Clients like br2684 will register notify events
|
|
* Currently we notify of signal found/lost
|
|
*/
|
|
int register_atmdevice_notifier(struct notifier_block *nb);
|
|
void unregister_atmdevice_notifier(struct notifier_block *nb);
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif
|