Wenyou Yang b8659752c3 ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ... Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work. Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081, But it outputs LOW during the reset period, which cause the NAND_Tree# enabled. Add phy_fixup() to disable NAND_Tree by overriding the Operation Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>		2015-01-12 15:50:23 +01:00
..
include/mach	ARM: SoC cleanup on mach-at91 for 3.19	2014-12-09 14:17:12 -08:00
Kconfig	ARM: at91/Kconfig: select board files automatically	2014-12-02 16:58:58 +01:00
Makefile	ARM: at91: remove old AT91-specific drivers	2014-12-02 16:59:06 +01:00
Makefile.boot	ARM: at91: remove unused CONFIG_ARCH_AT91SAM9G45 option	2014-11-13 11:08:13 +01:00
at91rm9200.c	ARM: at91: remove at91rm9200 legacy board support	2014-11-21 17:35:15 +01:00
at91rm9200_time.c	ARM: at91: at91rm9200 ST initialization is now DT only	2014-12-02 16:59:07 +01:00
at91sam9g45.c	Third batch of cleanup/SoC for 3.19:	2014-11-28 16:15:14 +01:00
at91sam9n12.c	ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files	2014-11-26 18:43:44 +01:00
at91sam9rl.c	ARM: at91: remove useless init_time for DT-only SoCs	2014-11-19 23:23:59 +01:00
at91sam9x5.c	ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files	2014-11-26 18:43:44 +01:00
at91sam9260.c	ARM: at91: remove at91sam9260/at91sam9g20 legacy board support	2014-11-19 11:39:22 +01:00
at91sam9261.c	ARM: at91: remove at91sam9261/at91sam9g10 legacy board support	2014-11-21 12:09:27 +01:00
at91sam9263.c	ARM: at91: remove at91sam9263 legacy board support	2014-11-19 11:39:11 +01:00
board-dt-rm9200.c	ARM: at91: at91rm9200 ST initialization is now DT only	2014-12-02 16:59:07 +01:00
board-dt-sam9.c	ARM: at91: remove unused board.h file	2014-12-03 14:16:07 +01:00
board-dt-sama5.c	ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree	2015-01-12 15:50:23 +01:00
generic.h	ARM: at91/clocksource: remove !DT PIT initializations	2014-12-03 14:15:52 +01:00
pm.c	ARM: at91: remove old AT91-specific drivers	2014-12-02 16:59:06 +01:00
pm.h	ARM: at91: move sdramc/ddrsdr header to include/soc/at91	2014-11-13 12:03:44 +01:00
pm_slowclock.S	ARM: at91: move at91_pmc.h to include/linux/clk/at91_pmc.h	2013-12-02 15:22:15 +01:00
sam9_smc.c	ARM: at91: export sam9_smc interfaces	2014-03-21 18:19:29 +01:00
sam9_smc.h	ARM: at91: add accessor to manage SMC	2012-02-13 18:31:36 +01:00
sama5d3.c	ARM: at91/dt: remove old clk material	2013-12-02 15:31:29 +01:00
sama5d4.c	ARM: at91: SAMA5D4 SoC detection code and low level routines	2014-09-22 11:39:06 +02:00
setup.c	ARM: at91: cleanup initilisation code by removing dead code	2014-12-02 16:59:06 +01:00
soc.h	ARM: at91: cleanup initilisation code by removing dead code	2014-12-02 16:59:06 +01:00
sysirq_mask.c	ARM: at91: fix at91_sysirq_mask_rtc for sam9x5 SoCs	2014-06-06 16:08:08 -07:00