UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/tools/perf/Documentation/perf-script.txt

462 lines
16 KiB
Plaintext
Raw Blame History

perf-script(1)
=============
NAME
----
perf-script - Read perf.data (created by perf record) and display trace output
SYNOPSIS
--------
[verse]
'perf script' [<options>]
'perf script' [<options>] record <script> [<record-options>] <command>
'perf script' [<options>] report <script> [script-args]
'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
'perf script' [<options>] <top-script> [script-args]
DESCRIPTION
-----------
This command reads the input file and displays the trace recorded.
There are several variants of perf script:
'perf script' to see a detailed trace of the workload that was
recorded.
You can also run a set of pre-canned scripts that aggregate and
summarize the raw trace data in various ways (the list of scripts is
available via 'perf script -l'). The following variants allow you to
record and run those scripts:
'perf script record <script> <command>' to record the events required
for 'perf script report'. <script> is the name displayed in the
output of 'perf script --list' i.e. the actual script name minus any
language extension. If <command> is not specified, the events are
recorded using the -a (system-wide) 'perf record' option.
'perf script report <script> [args]' to run and display the results
of <script>. <script> is the name displayed in the output of 'perf
script --list' i.e. the actual script name minus any language
extension. The perf.data output from a previous run of 'perf script
record <script>' is used and should be present for this command to
succeed. [args] refers to the (mainly optional) args expected by
the script.
'perf script <script> <required-script-args> <command>' to both
record the events required for <script> and to run the <script>
using 'live-mode' i.e. without writing anything to disk. <script>
is the name displayed in the output of 'perf script --list' i.e. the
actual script name minus any language extension. If <command> is
not specified, the events are recorded using the -a (system-wide)
'perf record' option. If <script> has any required args, they
should be specified before <command>. This mode doesn't allow for
optional script args to be specified; if optional script args are
desired, they can be specified using separate 'perf script record'
and 'perf script report' commands, with the stdout of the record step
piped to the stdin of the report script, using the '-o -' and '-i -'
options of the corresponding commands.
'perf script <top-script>' to both record the events required for
<top-script> and to run the <top-script> using 'live-mode'
i.e. without writing anything to disk. <top-script> is the name
displayed in the output of 'perf script --list' i.e. the actual
script name minus any language extension; a <top-script> is defined
as any script name ending with the string 'top'.
[<record-options>] can be passed to the record steps of 'perf script
record' and 'live-mode' variants; this isn't possible however for
<top-script> 'live-mode' or 'perf script report' variants.
See the 'SEE ALSO' section for links to language-specific
information on how to write and run your own trace scripts.
OPTIONS
-------
<command>...::
Any command you can specify in a shell.
-D::
--dump-raw-trace=::
Display verbose dump of the trace data.
-L::
--Latency=::
Show latency attributes (irqs/preemption disabled, etc).
-l::
--list=::
Display a list of available trace scripts.
-s ['lang']::
--script=::
Process trace data with the given script ([lang]:script[.ext]).
If the string 'lang' is specified in place of a script name, a
list of supported languages will be displayed instead.
-g::
--gen-script=::
Generate perf-script.[ext] starter script for given language,
using current perf.data.
-a::
Force system-wide collection. Scripts run without a <command>
normally use -a by default, while scripts run with a <command>
normally don't - this option allows the latter to be run in
system-wide mode.
-i::
--input=::
Input file name. (default: perf.data unless stdin is a fifo)
-d::
--debug-mode::
Do various checks like samples ordering and lost events.
-F::
--fields::
Comma separated list of fields to print. Options are:
comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr, symoff,
srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output, brstackinsn,
brstackoff, callindent, insn, insnlen, synth, phys_addr, metric, misc, srccode, ipc.
Field list can be prepended with the type, trace, sw or hw,
to indicate to which event type the field list applies.
e.g., -F sw:comm,tid,time,ip,sym and -F trace:time,cpu,trace
perf script -F <fields>
is equivalent to:
perf script -F trace:<fields> -F sw:<fields> -F hw:<fields>
i.e., the specified fields apply to all event types if the type string
is not given.
In addition to overriding fields, it is also possible to add or remove
fields from the defaults. For example
-F -cpu,+insn
removes the cpu field and adds the insn field. Adding/removing fields
cannot be mixed with normal overriding.
The arguments are processed in the order received. A later usage can
reset a prior request. e.g.:
-F trace: -F comm,tid,time,ip,sym
The first -F suppresses trace events (field list is ""), but then the
second invocation sets the fields to comm,tid,time,ip,sym. In this case a
warning is given to the user:
"Overriding previous field request for all events."
Alternatively, consider the order:
-F comm,tid,time,ip,sym -F trace:
The first -F sets the fields for all events and the second -F
suppresses trace events. The user is given a warning message about
the override, and the result of the above is that only S/W and H/W
events are displayed with the given fields.
It's possible tp add/remove fields only for specific event type:
-Fsw:-cpu,-period
removes cpu and period from software events.
For the 'wildcard' option if a user selected field is invalid for an
event type, a message is displayed to the user that the option is
ignored for that type. For example:
$ perf script -F comm,tid,trace
'trace' not valid for hardware events. Ignoring.
'trace' not valid for software events. Ignoring.
Alternatively, if the type is given an invalid field is specified it
is an error. For example:
perf script -v -F sw:comm,tid,trace
'trace' not valid for software events.
At this point usage is displayed, and perf-script exits.
The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt,
transaction abort, trace begin, trace end, and in transaction,
respectively. Known combinations of flags are printed more nicely e.g.
"call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b",
"int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs",
"async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB",
"tr end" for "bE". However the "x" flag will be display separately in those
cases e.g. "jcc (x)" for a condition branch within a transaction.
The callindent field is synthesized and may have a value when
Instruction Trace decoding. For calls and returns, it will display the
name of the symbol indented with spaces to reflect the stack depth.
When doing instruction trace decoding insn and insnlen give the
instruction bytes and the instruction length of the current
instruction.
The synth field is used by synthesized events which may be created when
Instruction Trace decoding.
The ipc (instructions per cycle) field is synthesized and may have a value when
Instruction Trace decoding.
Finally, a user may not set fields to none for all event types.
i.e., -F "" is not allowed.
The brstack output includes branch related information with raw addresses using the
/v/v/v/v/cycles syntax in the following order:
FROM: branch source instruction
TO : branch target instruction
M/P/-: M=branch target mispredicted or branch direction was mispredicted, P=target predicted or direction predicted, -=not supported
X/- : X=branch inside a transactional region, -=not in transaction region or not supported
A/- : A=TSX abort entry, -=not aborted region or not supported
cycles
The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
When brstackinsn is specified the full assembler sequences of branch sequences for each sample
is printed. This is the full execution path leading to the sample. This is only supported when the
sample was recorded with perf record -b or -j any.
The brstackoff field will print an offset into a specific dso/binary.
With the metric option perf script can compute metrics for
sampling periods, similar to perf stat. This requires
specifying a group with multiple events defining metrics with the :S option
for perf record. perf will sample on the first event, and
print computed metrics for all the events in the group. Please note
that the metric computed is averaged over the whole sampling
period (since the last sample), not just for the sample point.
For sample events it's possible to display misc field with -F +misc option,
following letters are displayed for each bit:
PERF_RECORD_MISC_KERNEL K
PERF_RECORD_MISC_USER U
PERF_RECORD_MISC_HYPERVISOR H
PERF_RECORD_MISC_GUEST_KERNEL G
PERF_RECORD_MISC_GUEST_USER g
PERF_RECORD_MISC_MMAP_DATA* M
PERF_RECORD_MISC_COMM_EXEC E
PERF_RECORD_MISC_SWITCH_OUT S
PERF_RECORD_MISC_SWITCH_OUT_PREEMPT Sp
$ perf script -F +misc ...
sched-messaging 1414 K 28690.636582: 4590 cycles ...
sched-messaging 1407 U 28690.636600: 325620 cycles ...
sched-messaging 1414 K 28690.636608: 19473 cycles ...
misc field ___________/
-k::
--vmlinux=<file>::
vmlinux pathname
--kallsyms=<file>::
kallsyms pathname
--symfs=<directory>::
Look for files with symbols relative to this directory.
-G::
--hide-call-graph::
When printing symbols do not display call chain.
--stop-bt::
Stop display of callgraph at these symbols
-C::
--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
be provided as a comma-separated list with no space: 0,1. Ranges of
CPUs are specified with -: 0-2. Default is to report samples on all
CPUs.
-c::
--comms=::
Only display events for these comms. CSV that understands
file://filename entries.
--pid=::
Only show events for given process ID (comma separated list).
--tid=::
Only show events for given thread ID (comma separated list).
-I::
--show-info::
Display extended information about the perf.data file. This adds
information which may be very large and thus may clutter the display.
It currently includes: cpu and numa topology of the host system.
It can only be used with the perf script report mode.
--show-kernel-path::
Try to resolve the path of [kernel.kallsyms]
--show-task-events
Display task related events (e.g. FORK, COMM, EXIT).
--show-mmap-events
Display mmap related events (e.g. MMAP, MMAP2).
--show-namespace-events
Display namespace events i.e. events of type PERF_RECORD_NAMESPACES.
--show-switch-events
Display context switch events i.e. events of type PERF_RECORD_SWITCH or
PERF_RECORD_SWITCH_CPU_WIDE.
--show-lost-events
Display lost events i.e. events of type PERF_RECORD_LOST.
--show-round-events
Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND.
--show-bpf-events
Display bpf events i.e. events of type PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT.
--show-cgroup-events
Display cgroup events i.e. events of type PERF_RECORD_CGROUP.
--show-text-poke-events
Display text poke events i.e. events of type PERF_RECORD_TEXT_POKE and
PERF_RECORD_KSYMBOL.
--demangle::
Demangle symbol names to human readable form. It's enabled by default,
disable with --no-demangle.
--demangle-kernel::
Demangle kernel symbol names to human readable form (for C++ kernels).
--header
Show perf.data header.
--header-only
Show only perf.data header.
--itrace::
Options for decoding instruction tracing data. The options are:
include::itrace.txt[]
To disable decoding entirely, use --no-itrace.
--full-source-path::
Show the full path for source files for srcline output.
--max-stack::
Set the stack depth limit when parsing the callchain, anything
beyond the specified depth will be ignored. This is a trade-off
between information loss and faster processing especially for
workloads that can have a very long callchain stack.
Note that when using the --itrace option the synthesized callchain size
will override this value if the synthesized callchain size is bigger.
Default: 127
--ns::
Use 9 decimal places when displaying time (i.e. show the nanoseconds)
-f::
--force::
Don't do ownership validation.
--time::
Only analyze samples within given time window: <start>,<stop>. Times
have the format seconds.nanoseconds. If start is not given (i.e. time
string is ',x.y') then analysis starts at the beginning of the file. If
stop time is not given (i.e. time string is 'x.y,') then analysis goes
to end of file. Multiple ranges can be separated by spaces, which
requires the argument to be quoted e.g. --time "1234.567,1234.789 1235,"
Also support time percent with multiple time ranges. Time string is
'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
For example:
Select the second 10% time slice:
perf script --time 10%/2
Select from 0% to 10% time slice:
perf script --time 0%-10%
Select the first and second 10% time slices:
perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
perf script --time 0%-10%,30%-40%
--max-blocks::
Set the maximum number of program blocks to print with brstackinsn for
each sample.
--reltime::
Print time stamps relative to trace start.
--deltatime::
Print time stamps relative to previous event.
--per-event-dump::
Create per event files with a "perf.data.EVENT.dump" name instead of
printing to stdout, useful, for instance, for generating flamegraphs.
--inline::
If a callgraph address belongs to an inlined function, the inline stack
will be printed. Each entry has function name and file/line. Enabled by
default, disable with --no-inline.
--insn-trace::
Show instruction stream for intel_pt traces. Combine with --xed to
show disassembly.
--xed::
Run xed disassembler on output. Requires installing the xed disassembler.
-S::
--symbols=symbol[,symbol...]::
Only consider the listed symbols. Symbols are typically a name
but they may also be hexadecimal address.
For example, to select the symbol noploop or the address 0x4007a0:
perf script --symbols=noploop,0x4007a0
--call-trace::
Show call stream for intel_pt traces. The CPUs are interleaved, but
can be filtered with -C.
--call-ret-trace::
Show call and return stream for intel_pt traces.
--graph-function::
For itrace only show specified functions and their callees for
itrace. Multiple functions can be separated by comma.
--switch-on EVENT_NAME::
Only consider events after this event is found.
--switch-off EVENT_NAME::
Stop considering events after this event is found.
--show-on-off-events::
Show the --switch-on/off events too.
--stitch-lbr::
Show callgraph with stitched LBRs, which may have more complete
callgraph. The perf.data file must have been obtained using
perf record --call-graph lbr.
Disabled by default. In common cases with call stack overflows,
it can recreate better call stacks than the default lbr call stack
output. But this approach is not full proof. There can be cases
where it creates incorrect call stacks from incorrect matches.
The known limitations include exception handing such as
setjmp/longjmp will have calls/returns not match.
SEE ALSO
--------
linkperf:perf-record[1], linkperf:perf-script-perl[1],
linkperf:perf-script-python[1], linkperf:perf-intel-pt[1]
Reference in New Issue View Git Blame Copy Permalink