630 lines
13 KiB
ArmAsm
630 lines
13 KiB
ArmAsm
/*
|
|
* This file contains miscellaneous low-level functions.
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
|
|
* and Paul Mackerras.
|
|
* Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
|
|
* PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/sys.h>
|
|
#include <asm/unistd.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/kexec.h>
|
|
|
|
.text
|
|
|
|
_GLOBAL(call_do_softirq)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
|
|
mr r1,r3
|
|
bl .__do_softirq
|
|
ld r1,0(r1)
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
_GLOBAL(call_handle_irq)
|
|
ld r8,0(r6)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
mtctr r8
|
|
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
|
|
mr r1,r5
|
|
bctrl
|
|
ld r1,0(r1)
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
.section ".toc","aw"
|
|
PPC64_CACHES:
|
|
.tc ppc64_caches[TC],ppc64_caches
|
|
.section ".text"
|
|
|
|
/*
|
|
* Write any modified data cache blocks out to memory
|
|
* and invalidate the corresponding instruction cache blocks.
|
|
*
|
|
* flush_icache_range(unsigned long start, unsigned long stop)
|
|
*
|
|
* flush all bytes from start through stop-1 inclusive
|
|
*/
|
|
|
|
_KPROBE(__flush_icache_range)
|
|
|
|
/*
|
|
* Flush the data cache to memory
|
|
*
|
|
* Different systems have different cache line sizes
|
|
* and in some cases i-cache and d-cache line sizes differ from
|
|
* each other.
|
|
*/
|
|
ld r10,PPC64_CACHES@toc(r2)
|
|
lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
|
|
addi r5,r7,-1
|
|
andc r6,r3,r5 /* round low to line bdy */
|
|
subf r8,r6,r4 /* compute length */
|
|
add r8,r8,r5 /* ensure we get enough */
|
|
lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */
|
|
srw. r8,r8,r9 /* compute line count */
|
|
beqlr /* nothing to do? */
|
|
mtctr r8
|
|
1: dcbst 0,r6
|
|
add r6,r6,r7
|
|
bdnz 1b
|
|
sync
|
|
|
|
/* Now invalidate the instruction cache */
|
|
|
|
lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */
|
|
addi r5,r7,-1
|
|
andc r6,r3,r5 /* round low to line bdy */
|
|
subf r8,r6,r4 /* compute length */
|
|
add r8,r8,r5
|
|
lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */
|
|
srw. r8,r8,r9 /* compute line count */
|
|
beqlr /* nothing to do? */
|
|
mtctr r8
|
|
2: icbi 0,r6
|
|
add r6,r6,r7
|
|
bdnz 2b
|
|
isync
|
|
blr
|
|
.previous .text
|
|
/*
|
|
* Like above, but only do the D-cache.
|
|
*
|
|
* flush_dcache_range(unsigned long start, unsigned long stop)
|
|
*
|
|
* flush all bytes from start to stop-1 inclusive
|
|
*/
|
|
_GLOBAL(flush_dcache_range)
|
|
|
|
/*
|
|
* Flush the data cache to memory
|
|
*
|
|
* Different systems have different cache line sizes
|
|
*/
|
|
ld r10,PPC64_CACHES@toc(r2)
|
|
lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
|
|
addi r5,r7,-1
|
|
andc r6,r3,r5 /* round low to line bdy */
|
|
subf r8,r6,r4 /* compute length */
|
|
add r8,r8,r5 /* ensure we get enough */
|
|
lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */
|
|
srw. r8,r8,r9 /* compute line count */
|
|
beqlr /* nothing to do? */
|
|
mtctr r8
|
|
0: dcbst 0,r6
|
|
add r6,r6,r7
|
|
bdnz 0b
|
|
sync
|
|
blr
|
|
|
|
/*
|
|
* Like above, but works on non-mapped physical addresses.
|
|
* Use only for non-LPAR setups ! It also assumes real mode
|
|
* is cacheable. Used for flushing out the DART before using
|
|
* it as uncacheable memory
|
|
*
|
|
* flush_dcache_phys_range(unsigned long start, unsigned long stop)
|
|
*
|
|
* flush all bytes from start to stop-1 inclusive
|
|
*/
|
|
_GLOBAL(flush_dcache_phys_range)
|
|
ld r10,PPC64_CACHES@toc(r2)
|
|
lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
|
|
addi r5,r7,-1
|
|
andc r6,r3,r5 /* round low to line bdy */
|
|
subf r8,r6,r4 /* compute length */
|
|
add r8,r8,r5 /* ensure we get enough */
|
|
lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */
|
|
srw. r8,r8,r9 /* compute line count */
|
|
beqlr /* nothing to do? */
|
|
mfmsr r5 /* Disable MMU Data Relocation */
|
|
ori r0,r5,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsr r0
|
|
sync
|
|
isync
|
|
mtctr r8
|
|
0: dcbst 0,r6
|
|
add r6,r6,r7
|
|
bdnz 0b
|
|
sync
|
|
isync
|
|
mtmsr r5 /* Re-enable MMU Data Relocation */
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
_GLOBAL(flush_inval_dcache_range)
|
|
ld r10,PPC64_CACHES@toc(r2)
|
|
lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
|
|
addi r5,r7,-1
|
|
andc r6,r3,r5 /* round low to line bdy */
|
|
subf r8,r6,r4 /* compute length */
|
|
add r8,r8,r5 /* ensure we get enough */
|
|
lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
|
|
srw. r8,r8,r9 /* compute line count */
|
|
beqlr /* nothing to do? */
|
|
sync
|
|
isync
|
|
mtctr r8
|
|
0: dcbf 0,r6
|
|
add r6,r6,r7
|
|
bdnz 0b
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
|
|
/*
|
|
* Flush a particular page from the data cache to RAM.
|
|
* Note: this is necessary because the instruction cache does *not*
|
|
* snoop from the data cache.
|
|
*
|
|
* void __flush_dcache_icache(void *page)
|
|
*/
|
|
_GLOBAL(__flush_dcache_icache)
|
|
/*
|
|
* Flush the data cache to memory
|
|
*
|
|
* Different systems have different cache line sizes
|
|
*/
|
|
|
|
/* Flush the dcache */
|
|
ld r7,PPC64_CACHES@toc(r2)
|
|
clrrdi r3,r3,PAGE_SHIFT /* Page align */
|
|
lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */
|
|
lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */
|
|
mr r6,r3
|
|
mtctr r4
|
|
0: dcbst 0,r6
|
|
add r6,r6,r5
|
|
bdnz 0b
|
|
sync
|
|
|
|
/* Now invalidate the icache */
|
|
|
|
lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */
|
|
lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */
|
|
mtctr r4
|
|
1: icbi 0,r3
|
|
add r3,r3,r5
|
|
bdnz 1b
|
|
isync
|
|
blr
|
|
|
|
|
|
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
|
|
/*
|
|
* Do an IO access in real mode
|
|
*/
|
|
_GLOBAL(real_readb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
mfspr r6,SPRN_HID4
|
|
rldicl r5,r6,32,0
|
|
ori r5,r5,0x100
|
|
rldicl r5,r5,32,0
|
|
sync
|
|
mtspr SPRN_HID4,r5
|
|
isync
|
|
slbia
|
|
isync
|
|
lbz r3,0(r3)
|
|
sync
|
|
mtspr SPRN_HID4,r6
|
|
isync
|
|
slbia
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
/*
|
|
* Do an IO access in real mode
|
|
*/
|
|
_GLOBAL(real_writeb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
mfspr r6,SPRN_HID4
|
|
rldicl r5,r6,32,0
|
|
ori r5,r5,0x100
|
|
rldicl r5,r5,32,0
|
|
sync
|
|
mtspr SPRN_HID4,r5
|
|
isync
|
|
slbia
|
|
isync
|
|
stb r3,0(r4)
|
|
sync
|
|
mtspr SPRN_HID4,r6
|
|
isync
|
|
slbia
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
|
|
|
|
#ifdef CONFIG_PPC_PASEMI
|
|
|
|
/* No support in all binutils for these yet, so use defines */
|
|
#define LBZCIX(RT,RA,RB) .long (0x7c0006aa|(RT<<21)|(RA<<16)|(RB << 11))
|
|
#define STBCIX(RS,RA,RB) .long (0x7c0007aa|(RS<<21)|(RA<<16)|(RB << 11))
|
|
|
|
|
|
_GLOBAL(real_205_readb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
LBZCIX(r3,0,r3)
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
_GLOBAL(real_205_writeb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
STBCIX(r3,0,r4)
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
#endif /* CONFIG_PPC_PASEMI */
|
|
|
|
|
|
#ifdef CONFIG_CPU_FREQ_PMAC64
|
|
/*
|
|
* SCOM access functions for 970 (FX only for now)
|
|
*
|
|
* unsigned long scom970_read(unsigned int address);
|
|
* void scom970_write(unsigned int address, unsigned long value);
|
|
*
|
|
* The address passed in is the 24 bits register address. This code
|
|
* is 970 specific and will not check the status bits, so you should
|
|
* know what you are doing.
|
|
*/
|
|
_GLOBAL(scom970_read)
|
|
/* interrupts off */
|
|
mfmsr r4
|
|
ori r0,r4,MSR_EE
|
|
xori r0,r0,MSR_EE
|
|
mtmsrd r0,1
|
|
|
|
/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
|
|
* (including parity). On current CPUs they must be 0'd,
|
|
* and finally or in RW bit
|
|
*/
|
|
rlwinm r3,r3,8,0,15
|
|
ori r3,r3,0x8000
|
|
|
|
/* do the actual scom read */
|
|
sync
|
|
mtspr SPRN_SCOMC,r3
|
|
isync
|
|
mfspr r3,SPRN_SCOMD
|
|
isync
|
|
mfspr r0,SPRN_SCOMC
|
|
isync
|
|
|
|
/* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
|
|
* that's the best we can do). Not implemented yet as we don't use
|
|
* the scom on any of the bogus CPUs yet, but may have to be done
|
|
* ultimately
|
|
*/
|
|
|
|
/* restore interrupts */
|
|
mtmsrd r4,1
|
|
blr
|
|
|
|
|
|
_GLOBAL(scom970_write)
|
|
/* interrupts off */
|
|
mfmsr r5
|
|
ori r0,r5,MSR_EE
|
|
xori r0,r0,MSR_EE
|
|
mtmsrd r0,1
|
|
|
|
/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
|
|
* (including parity). On current CPUs they must be 0'd.
|
|
*/
|
|
|
|
rlwinm r3,r3,8,0,15
|
|
|
|
sync
|
|
mtspr SPRN_SCOMD,r4 /* write data */
|
|
isync
|
|
mtspr SPRN_SCOMC,r3 /* write command */
|
|
isync
|
|
mfspr 3,SPRN_SCOMC
|
|
isync
|
|
|
|
/* restore interrupts */
|
|
mtmsrd r5,1
|
|
blr
|
|
#endif /* CONFIG_CPU_FREQ_PMAC64 */
|
|
|
|
|
|
/*
|
|
* Create a kernel thread
|
|
* kernel_thread(fn, arg, flags)
|
|
*/
|
|
_GLOBAL(kernel_thread)
|
|
std r29,-24(r1)
|
|
std r30,-16(r1)
|
|
stdu r1,-STACK_FRAME_OVERHEAD(r1)
|
|
mr r29,r3
|
|
mr r30,r4
|
|
ori r3,r5,CLONE_VM /* flags */
|
|
oris r3,r3,(CLONE_UNTRACED>>16)
|
|
li r4,0 /* new sp (unused) */
|
|
li r0,__NR_clone
|
|
sc
|
|
bns+ 1f /* did system call indicate error? */
|
|
neg r3,r3 /* if so, make return code negative */
|
|
1: cmpdi 0,r3,0 /* parent or child? */
|
|
bne 2f /* return if parent */
|
|
li r0,0
|
|
stdu r0,-STACK_FRAME_OVERHEAD(r1)
|
|
ld r2,8(r29)
|
|
ld r29,0(r29)
|
|
mtlr r29 /* fn addr in lr */
|
|
mr r3,r30 /* load arg and call fn */
|
|
blrl
|
|
li r0,__NR_exit /* exit after child exits */
|
|
li r3,0
|
|
sc
|
|
2: addi r1,r1,STACK_FRAME_OVERHEAD
|
|
ld r29,-24(r1)
|
|
ld r30,-16(r1)
|
|
blr
|
|
|
|
/*
|
|
* disable_kernel_fp()
|
|
* Disable the FPU.
|
|
*/
|
|
_GLOBAL(disable_kernel_fp)
|
|
mfmsr r3
|
|
rldicl r0,r3,(63-MSR_FP_LG),1
|
|
rldicl r3,r0,(MSR_FP_LG+1),0
|
|
mtmsrd r3 /* disable use of fpu now */
|
|
isync
|
|
blr
|
|
|
|
/* kexec_wait(phys_cpu)
|
|
*
|
|
* wait for the flag to change, indicating this kernel is going away but
|
|
* the slave code for the next one is at addresses 0 to 100.
|
|
*
|
|
* This is used by all slaves.
|
|
*
|
|
* Physical (hardware) cpu id should be in r3.
|
|
*/
|
|
_GLOBAL(kexec_wait)
|
|
bl 1f
|
|
1: mflr r5
|
|
addi r5,r5,kexec_flag-1b
|
|
|
|
li r4,KEXEC_STATE_REAL_MODE
|
|
stb r4,PACAKEXECSTATE(r13)
|
|
SYNC
|
|
|
|
99: HMT_LOW
|
|
#ifdef CONFIG_KEXEC /* use no memory without kexec */
|
|
lwz r4,0(r5)
|
|
cmpwi 0,r4,0
|
|
bnea 0x60
|
|
#endif
|
|
b 99b
|
|
|
|
/* this can be in text because we won't change it until we are
|
|
* running in real anyways
|
|
*/
|
|
kexec_flag:
|
|
.long 0
|
|
|
|
|
|
#ifdef CONFIG_KEXEC
|
|
|
|
/* kexec_smp_wait(void)
|
|
*
|
|
* call with interrupts off
|
|
* note: this is a terminal routine, it does not save lr
|
|
*
|
|
* get phys id from paca
|
|
* switch to real mode
|
|
* join other cpus in kexec_wait(phys_id)
|
|
*/
|
|
_GLOBAL(kexec_smp_wait)
|
|
lhz r3,PACAHWCPUID(r13)
|
|
bl real_mode
|
|
b .kexec_wait
|
|
|
|
/*
|
|
* switch to real mode (turn mmu off)
|
|
* we use the early kernel trick that the hardware ignores bits
|
|
* 0 and 1 (big endian) of the effective address in real mode
|
|
*
|
|
* don't overwrite r3 here, it is live for kexec_wait above.
|
|
*/
|
|
real_mode: /* assume normal blr return */
|
|
1: li r9,MSR_RI
|
|
li r10,MSR_DR|MSR_IR
|
|
mflr r11 /* return address to SRR0 */
|
|
mfmsr r12
|
|
andc r9,r12,r9
|
|
andc r10,r12,r10
|
|
|
|
mtmsrd r9,1
|
|
mtspr SPRN_SRR1,r10
|
|
mtspr SPRN_SRR0,r11
|
|
rfid
|
|
|
|
|
|
/*
|
|
* kexec_sequence(newstack, start, image, control, clear_all())
|
|
*
|
|
* does the grungy work with stack switching and real mode switches
|
|
* also does simple calls to other code
|
|
*/
|
|
|
|
_GLOBAL(kexec_sequence)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
|
|
/* switch stacks to newstack -- &kexec_stack.stack */
|
|
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
|
|
mr r1,r3
|
|
|
|
li r0,0
|
|
std r0,16(r1)
|
|
|
|
/* save regs for local vars on new stack.
|
|
* yes, we won't go back, but ...
|
|
*/
|
|
std r31,-8(r1)
|
|
std r30,-16(r1)
|
|
std r29,-24(r1)
|
|
std r28,-32(r1)
|
|
std r27,-40(r1)
|
|
std r26,-48(r1)
|
|
std r25,-56(r1)
|
|
|
|
stdu r1,-STACK_FRAME_OVERHEAD-64(r1)
|
|
|
|
/* save args into preserved regs */
|
|
mr r31,r3 /* newstack (both) */
|
|
mr r30,r4 /* start (real) */
|
|
mr r29,r5 /* image (virt) */
|
|
mr r28,r6 /* control, unused */
|
|
mr r27,r7 /* clear_all() fn desc */
|
|
mr r26,r8 /* spare */
|
|
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
|
|
|
|
/* disable interrupts, we are overwriting kernel data next */
|
|
mfmsr r3
|
|
rlwinm r3,r3,0,17,15
|
|
mtmsrd r3,1
|
|
|
|
/* copy dest pages, flush whole dest image */
|
|
mr r3,r29
|
|
bl .kexec_copy_flush /* (image) */
|
|
|
|
/* turn off mmu */
|
|
bl real_mode
|
|
|
|
/* copy 0x100 bytes starting at start to 0 */
|
|
li r3,0
|
|
mr r4,r30 /* start, aka phys mem offset */
|
|
li r5,0x100
|
|
li r6,0
|
|
bl .copy_and_flush /* (dest, src, copy limit, start offset) */
|
|
1: /* assume normal blr return */
|
|
|
|
/* release other cpus to the new kernel secondary start at 0x60 */
|
|
mflr r5
|
|
li r6,1
|
|
stw r6,kexec_flag-1b(5)
|
|
|
|
/* clear out hardware hash page table and tlb */
|
|
ld r5,0(r27) /* deref function descriptor */
|
|
mtctr r5
|
|
bctrl /* ppc_md.hpte_clear_all(void); */
|
|
|
|
/*
|
|
* kexec image calling is:
|
|
* the first 0x100 bytes of the entry point are copied to 0
|
|
*
|
|
* all slaves branch to slave = 0x60 (absolute)
|
|
* slave(phys_cpu_id);
|
|
*
|
|
* master goes to start = entry point
|
|
* start(phys_cpu_id, start, 0);
|
|
*
|
|
*
|
|
* a wrapper is needed to call existing kernels, here is an approximate
|
|
* description of one method:
|
|
*
|
|
* v2: (2.6.10)
|
|
* start will be near the boot_block (maybe 0x100 bytes before it?)
|
|
* it will have a 0x60, which will b to boot_block, where it will wait
|
|
* and 0 will store phys into struct boot-block and load r3 from there,
|
|
* copy kernel 0-0x100 and tell slaves to back down to 0x60 again
|
|
*
|
|
* v1: (2.6.9)
|
|
* boot block will have all cpus scanning device tree to see if they
|
|
* are the boot cpu ?????
|
|
* other device tree differences (prop sizes, va vs pa, etc)...
|
|
*/
|
|
mr r3,r25 # my phys cpu
|
|
mr r4,r30 # start, aka phys mem offset
|
|
mtlr 4
|
|
li r5,0
|
|
blr /* image->start(physid, image->start, 0); */
|
|
#endif /* CONFIG_KEXEC */
|