OpenCloudOS-Kernel/drivers/ata/pata_cmd640.c

308 lines
7.4 KiB
C

/*
* pata_cmd640.c - CMD640 PCI PATA for new ATA layer
* (C) 2007 Red Hat Inc
* Alan Cox <alan@redhat.com>
*
* Based upon
* linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
*
* Copyright (C) 1995-1996 Linus Torvalds & authors (see driver)
*
* This drives only the PCI version of the controller. If you have a
* VLB one then we have enough docs to support it but you can write
* your own code.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "pata_cmd640"
#define DRV_VERSION "0.0.5"
struct cmd640_reg {
int last;
u8 reg58[ATA_MAX_DEVICES];
};
enum {
CFR = 0x50,
CNTRL = 0x51,
CMDTIM = 0x52,
ARTIM0 = 0x53,
DRWTIM0 = 0x54,
ARTIM23 = 0x57,
DRWTIM23 = 0x58,
BRST = 0x59
};
/**
* cmd640_set_piomode - set initial PIO mode data
* @ap: ATA port
* @adev: ATA device
*
* Called to do the PIO mode setup.
*/
static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct cmd640_reg *timing = ap->private_data;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct ata_timing t;
const unsigned long T = 1000000 / 33;
const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
u8 reg;
int arttim = ARTIM0 + 2 * adev->devno;
struct ata_device *pair = ata_dev_pair(adev);
if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
return;
}
/* The second channel has shared timings and the setup timing is
messy to switch to merge it for worst case */
if (ap->port_no && pair) {
struct ata_timing p;
ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
}
/* Make the timings fit */
if (t.recover > 16) {
t.active += t.recover - 16;
t.recover = 16;
}
if (t.active > 16)
t.active = 16;
/* Now convert the clocks into values we can actually stuff into
the chip */
if (t.recover > 1)
t.recover--; /* 640B only */
else
t.recover = 15;
if (t.setup > 4)
t.setup = 0xC0;
else
t.setup = setup_data[t.setup];
if (ap->port_no == 0) {
t.active &= 0x0F; /* 0 = 16 */
/* Load setup timing */
pci_read_config_byte(pdev, arttim, &reg);
reg &= 0x3F;
reg |= t.setup;
pci_write_config_byte(pdev, arttim, reg);
/* Load active/recovery */
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
} else {
/* Save the shared timings for channel, they will be loaded
by qc_issue_prot. Reloading the setup time is expensive
so we keep a merged one loaded */
pci_read_config_byte(pdev, ARTIM23, &reg);
reg &= 0x3F;
reg |= t.setup;
pci_write_config_byte(pdev, ARTIM23, reg);
timing->reg58[adev->devno] = (t.active << 4) | t.recover;
}
}
/**
* cmd640_qc_issue_prot - command preparation hook
* @qc: Command to be issued
*
* Channel 1 has shared timings. We must reprogram the
* clock each drive 2/3 switch we do.
*/
static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct cmd640_reg *timing = ap->private_data;
if (ap->port_no != 0 && adev->devno != timing->last) {
pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
timing->last = adev->devno;
}
return ata_qc_issue_prot(qc);
}
/**
* cmd640_port_start - port setup
* @ap: ATA port being set up
*
* The CMD640 needs to maintain private data structures so we
* allocate space here.
*/
static int cmd640_port_start(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct cmd640_reg *timing;
int ret = ata_port_start(ap);
if (ret < 0)
return ret;
timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
if (timing == NULL)
return -ENOMEM;
timing->last = -1; /* Force a load */
ap->private_data = timing;
return ret;
}
static struct scsi_host_template cmd640_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations cmd640_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = cmd640_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = cmd640_qc_issue_prot,
/* In theory this is not needed once we kill the prefetcher */
.data_xfer = ata_data_xfer_noirq,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
.port_start = cmd640_port_start,
};
static void cmd640_hardware_init(struct pci_dev *pdev)
{
u8 r;
u8 ctrl;
/* CMD640 detected, commiserations */
pci_write_config_byte(pdev, 0x5B, 0x00);
/* Get version info */
pci_read_config_byte(pdev, CFR, &r);
/* PIO0 command cycles */
pci_write_config_byte(pdev, CMDTIM, 0);
/* 512 byte bursts (sector) */
pci_write_config_byte(pdev, BRST, 0x40);
/*
* A reporter a long time ago
* Had problems with the data fifo
* So don't run the risk
* Of putting crap on the disk
* For its better just to go slow
*/
/* Do channel 0 */
pci_read_config_byte(pdev, CNTRL, &ctrl);
pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
/* Ditto for channel 1 */
pci_read_config_byte(pdev, ARTIM23, &ctrl);
ctrl |= 0x0C;
pci_write_config_byte(pdev, ARTIM23, ctrl);
}
static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &cmd640_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &cmd640_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
cmd640_hardware_init(pdev);
return ata_pci_init_one(pdev, ppi);
}
static int cmd640_reinit_one(struct pci_dev *pdev)
{
cmd640_hardware_init(pdev);
#ifdef CONFIG_PM
return ata_pci_device_resume(pdev);
#else
return 0;
#endif
}
static const struct pci_device_id cmd640[] = {
{ PCI_VDEVICE(CMD, 0x640), 0 },
{ },
};
static struct pci_driver cmd640_pci_driver = {
.name = DRV_NAME,
.id_table = cmd640,
.probe = cmd640_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
#endif
.resume = cmd640_reinit_one,
};
static int __init cmd640_init(void)
{
return pci_register_driver(&cmd640_pci_driver);
}
static void __exit cmd640_exit(void)
{
pci_unregister_driver(&cmd640_pci_driver);
}
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cmd640);
MODULE_VERSION(DRV_VERSION);
module_init(cmd640_init);
module_exit(cmd640_exit);