1053 lines
27 KiB
C
1053 lines
27 KiB
C
/*
|
|
* V4L2 subdevice driver for OmniVision OV6650 Camera Sensor
|
|
*
|
|
* Copyright (C) 2010 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
|
|
*
|
|
* Based on OmniVision OV96xx Camera Driver
|
|
* Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on ov772x camera driver:
|
|
* Copyright (C) 2008 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
|
|
*
|
|
* Based on ov7670 and soc_camera_platform driver,
|
|
* Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
|
|
* Copyright (C) 2008 Magnus Damm
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
|
|
*
|
|
* Hardware specific bits initialy based on former work by Matt Callow
|
|
* drivers/media/video/omap/sensor_ov6650.c
|
|
* Copyright (C) 2006 Matt Callow
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/v4l2-mediabus.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <media/v4l2-clk.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
|
|
/* Register definitions */
|
|
#define REG_GAIN 0x00 /* range 00 - 3F */
|
|
#define REG_BLUE 0x01
|
|
#define REG_RED 0x02
|
|
#define REG_SAT 0x03 /* [7:4] saturation [0:3] reserved */
|
|
#define REG_HUE 0x04 /* [7:6] rsrvd [5] hue en [4:0] hue */
|
|
|
|
#define REG_BRT 0x06
|
|
|
|
#define REG_PIDH 0x0a
|
|
#define REG_PIDL 0x0b
|
|
|
|
#define REG_AECH 0x10
|
|
#define REG_CLKRC 0x11 /* Data Format and Internal Clock */
|
|
/* [7:6] Input system clock (MHz)*/
|
|
/* 00=8, 01=12, 10=16, 11=24 */
|
|
/* [5:0]: Internal Clock Pre-Scaler */
|
|
#define REG_COMA 0x12 /* [7] Reset */
|
|
#define REG_COMB 0x13
|
|
#define REG_COMC 0x14
|
|
#define REG_COMD 0x15
|
|
#define REG_COML 0x16
|
|
#define REG_HSTRT 0x17
|
|
#define REG_HSTOP 0x18
|
|
#define REG_VSTRT 0x19
|
|
#define REG_VSTOP 0x1a
|
|
#define REG_PSHFT 0x1b
|
|
#define REG_MIDH 0x1c
|
|
#define REG_MIDL 0x1d
|
|
#define REG_HSYNS 0x1e
|
|
#define REG_HSYNE 0x1f
|
|
#define REG_COME 0x20
|
|
#define REG_YOFF 0x21
|
|
#define REG_UOFF 0x22
|
|
#define REG_VOFF 0x23
|
|
#define REG_AEW 0x24
|
|
#define REG_AEB 0x25
|
|
#define REG_COMF 0x26
|
|
#define REG_COMG 0x27
|
|
#define REG_COMH 0x28
|
|
#define REG_COMI 0x29
|
|
|
|
#define REG_FRARL 0x2b
|
|
#define REG_COMJ 0x2c
|
|
#define REG_COMK 0x2d
|
|
#define REG_AVGY 0x2e
|
|
#define REG_REF0 0x2f
|
|
#define REG_REF1 0x30
|
|
#define REG_REF2 0x31
|
|
#define REG_FRAJH 0x32
|
|
#define REG_FRAJL 0x33
|
|
#define REG_FACT 0x34
|
|
#define REG_L1AEC 0x35
|
|
#define REG_AVGU 0x36
|
|
#define REG_AVGV 0x37
|
|
|
|
#define REG_SPCB 0x60
|
|
#define REG_SPCC 0x61
|
|
#define REG_GAM1 0x62
|
|
#define REG_GAM2 0x63
|
|
#define REG_GAM3 0x64
|
|
#define REG_SPCD 0x65
|
|
|
|
#define REG_SPCE 0x68
|
|
#define REG_ADCL 0x69
|
|
|
|
#define REG_RMCO 0x6c
|
|
#define REG_GMCO 0x6d
|
|
#define REG_BMCO 0x6e
|
|
|
|
|
|
/* Register bits, values, etc. */
|
|
#define OV6650_PIDH 0x66 /* high byte of product ID number */
|
|
#define OV6650_PIDL 0x50 /* low byte of product ID number */
|
|
#define OV6650_MIDH 0x7F /* high byte of mfg ID */
|
|
#define OV6650_MIDL 0xA2 /* low byte of mfg ID */
|
|
|
|
#define DEF_GAIN 0x00
|
|
#define DEF_BLUE 0x80
|
|
#define DEF_RED 0x80
|
|
|
|
#define SAT_SHIFT 4
|
|
#define SAT_MASK (0xf << SAT_SHIFT)
|
|
#define SET_SAT(x) (((x) << SAT_SHIFT) & SAT_MASK)
|
|
|
|
#define HUE_EN BIT(5)
|
|
#define HUE_MASK 0x1f
|
|
#define DEF_HUE 0x10
|
|
#define SET_HUE(x) (HUE_EN | ((x) & HUE_MASK))
|
|
|
|
#define DEF_AECH 0x4D
|
|
|
|
#define CLKRC_6MHz 0x00
|
|
#define CLKRC_12MHz 0x40
|
|
#define CLKRC_16MHz 0x80
|
|
#define CLKRC_24MHz 0xc0
|
|
#define CLKRC_DIV_MASK 0x3f
|
|
#define GET_CLKRC_DIV(x) (((x) & CLKRC_DIV_MASK) + 1)
|
|
|
|
#define COMA_RESET BIT(7)
|
|
#define COMA_QCIF BIT(5)
|
|
#define COMA_RAW_RGB BIT(4)
|
|
#define COMA_RGB BIT(3)
|
|
#define COMA_BW BIT(2)
|
|
#define COMA_WORD_SWAP BIT(1)
|
|
#define COMA_BYTE_SWAP BIT(0)
|
|
#define DEF_COMA 0x00
|
|
|
|
#define COMB_FLIP_V BIT(7)
|
|
#define COMB_FLIP_H BIT(5)
|
|
#define COMB_BAND_FILTER BIT(4)
|
|
#define COMB_AWB BIT(2)
|
|
#define COMB_AGC BIT(1)
|
|
#define COMB_AEC BIT(0)
|
|
#define DEF_COMB 0x5f
|
|
|
|
#define COML_ONE_CHANNEL BIT(7)
|
|
|
|
#define DEF_HSTRT 0x24
|
|
#define DEF_HSTOP 0xd4
|
|
#define DEF_VSTRT 0x04
|
|
#define DEF_VSTOP 0x94
|
|
|
|
#define COMF_HREF_LOW BIT(4)
|
|
|
|
#define COMJ_PCLK_RISING BIT(4)
|
|
#define COMJ_VSYNC_HIGH BIT(0)
|
|
|
|
/* supported resolutions */
|
|
#define W_QCIF (DEF_HSTOP - DEF_HSTRT)
|
|
#define W_CIF (W_QCIF << 1)
|
|
#define H_QCIF (DEF_VSTOP - DEF_VSTRT)
|
|
#define H_CIF (H_QCIF << 1)
|
|
|
|
#define FRAME_RATE_MAX 30
|
|
|
|
|
|
struct ov6650_reg {
|
|
u8 reg;
|
|
u8 val;
|
|
};
|
|
|
|
struct ov6650 {
|
|
struct v4l2_subdev subdev;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct {
|
|
/* exposure/autoexposure cluster */
|
|
struct v4l2_ctrl *autoexposure;
|
|
struct v4l2_ctrl *exposure;
|
|
};
|
|
struct {
|
|
/* gain/autogain cluster */
|
|
struct v4l2_ctrl *autogain;
|
|
struct v4l2_ctrl *gain;
|
|
};
|
|
struct {
|
|
/* blue/red/autowhitebalance cluster */
|
|
struct v4l2_ctrl *autowb;
|
|
struct v4l2_ctrl *blue;
|
|
struct v4l2_ctrl *red;
|
|
};
|
|
struct v4l2_clk *clk;
|
|
bool half_scale; /* scale down output by 2 */
|
|
struct v4l2_rect rect; /* sensor cropping window */
|
|
unsigned long pclk_limit; /* from host */
|
|
unsigned long pclk_max; /* from resolution and format */
|
|
struct v4l2_fract tpf; /* as requested with s_parm */
|
|
u32 code;
|
|
enum v4l2_colorspace colorspace;
|
|
};
|
|
|
|
|
|
static u32 ov6650_codes[] = {
|
|
MEDIA_BUS_FMT_YUYV8_2X8,
|
|
MEDIA_BUS_FMT_UYVY8_2X8,
|
|
MEDIA_BUS_FMT_YVYU8_2X8,
|
|
MEDIA_BUS_FMT_VYUY8_2X8,
|
|
MEDIA_BUS_FMT_SBGGR8_1X8,
|
|
MEDIA_BUS_FMT_Y8_1X8,
|
|
};
|
|
|
|
/* read a register */
|
|
static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
|
|
{
|
|
int ret;
|
|
u8 data = reg;
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = &data,
|
|
};
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
msg.flags = I2C_M_RD;
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
*val = data;
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
/* write a register */
|
|
static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val)
|
|
{
|
|
int ret;
|
|
unsigned char data[2] = { reg, val };
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = data,
|
|
};
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
udelay(100);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Read a register, alter its bits, write it back */
|
|
static int ov6650_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 mask)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
ret = ov6650_reg_read(client, reg, &val);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"[Read]-Modify-Write of register 0x%02x failed!\n",
|
|
reg);
|
|
return ret;
|
|
}
|
|
|
|
val &= ~mask;
|
|
val |= set;
|
|
|
|
ret = ov6650_reg_write(client, reg, val);
|
|
if (ret)
|
|
dev_err(&client->dev,
|
|
"Read-Modify-[Write] of register 0x%02x failed!\n",
|
|
reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct ov6650 *to_ov6650(const struct i2c_client *client)
|
|
{
|
|
return container_of(i2c_get_clientdata(client), struct ov6650, subdev);
|
|
}
|
|
|
|
/* Start/Stop streaming from the device */
|
|
static int ov6650_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Get status of additional camera capabilities */
|
|
static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
|
|
struct v4l2_subdev *sd = &priv->subdev;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
uint8_t reg, reg2;
|
|
int ret;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUTOGAIN:
|
|
ret = ov6650_reg_read(client, REG_GAIN, ®);
|
|
if (!ret)
|
|
priv->gain->val = reg;
|
|
return ret;
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
|
ret = ov6650_reg_read(client, REG_BLUE, ®);
|
|
if (!ret)
|
|
ret = ov6650_reg_read(client, REG_RED, ®2);
|
|
if (!ret) {
|
|
priv->blue->val = reg;
|
|
priv->red->val = reg2;
|
|
}
|
|
return ret;
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
ret = ov6650_reg_read(client, REG_AECH, ®);
|
|
if (!ret)
|
|
priv->exposure->val = reg;
|
|
return ret;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set status of additional camera capabilities */
|
|
static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
|
|
struct v4l2_subdev *sd = &priv->subdev;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUTOGAIN:
|
|
ret = ov6650_reg_rmw(client, REG_COMB,
|
|
ctrl->val ? COMB_AGC : 0, COMB_AGC);
|
|
if (!ret && !ctrl->val)
|
|
ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val);
|
|
return ret;
|
|
case V4L2_CID_AUTO_WHITE_BALANCE:
|
|
ret = ov6650_reg_rmw(client, REG_COMB,
|
|
ctrl->val ? COMB_AWB : 0, COMB_AWB);
|
|
if (!ret && !ctrl->val) {
|
|
ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val);
|
|
if (!ret)
|
|
ret = ov6650_reg_write(client, REG_RED,
|
|
priv->red->val);
|
|
}
|
|
return ret;
|
|
case V4L2_CID_SATURATION:
|
|
return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val),
|
|
SAT_MASK);
|
|
case V4L2_CID_HUE:
|
|
return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val),
|
|
HUE_MASK);
|
|
case V4L2_CID_BRIGHTNESS:
|
|
return ov6650_reg_write(client, REG_BRT, ctrl->val);
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val ==
|
|
V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC);
|
|
if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL)
|
|
ret = ov6650_reg_write(client, REG_AECH,
|
|
priv->exposure->val);
|
|
return ret;
|
|
case V4L2_CID_GAMMA:
|
|
return ov6650_reg_write(client, REG_GAM1, ctrl->val);
|
|
case V4L2_CID_VFLIP:
|
|
return ov6650_reg_rmw(client, REG_COMB,
|
|
ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V);
|
|
case V4L2_CID_HFLIP:
|
|
return ov6650_reg_rmw(client, REG_COMB,
|
|
ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int ov6650_get_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
u8 val;
|
|
|
|
if (reg->reg & ~0xff)
|
|
return -EINVAL;
|
|
|
|
reg->size = 1;
|
|
|
|
ret = ov6650_reg_read(client, reg->reg, &val);
|
|
if (!ret)
|
|
reg->val = (__u64)val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov6650_set_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (reg->reg & ~0xff || reg->val & ~0xff)
|
|
return -EINVAL;
|
|
|
|
return ov6650_reg_write(client, reg->reg, reg->val);
|
|
}
|
|
#endif
|
|
|
|
static int ov6650_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
int ret = 0;
|
|
|
|
if (on)
|
|
ret = v4l2_clk_enable(priv->clk);
|
|
else
|
|
v4l2_clk_disable(priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov6650_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
switch (sel->target) {
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
case V4L2_SEL_TGT_CROP_DEFAULT:
|
|
sel->r.left = DEF_HSTRT << 1;
|
|
sel->r.top = DEF_VSTRT << 1;
|
|
sel->r.width = W_CIF;
|
|
sel->r.height = H_CIF;
|
|
return 0;
|
|
case V4L2_SEL_TGT_CROP:
|
|
sel->r = priv->rect;
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ov6650_set_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
struct v4l2_rect rect = sel->r;
|
|
int ret;
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
|
|
sel->target != V4L2_SEL_TGT_CROP)
|
|
return -EINVAL;
|
|
|
|
v4l_bound_align_image(&rect.width, 2, W_CIF, 1,
|
|
&rect.height, 2, H_CIF, 1, 0);
|
|
v4l_bound_align_image(&rect.left, DEF_HSTRT << 1,
|
|
(DEF_HSTRT << 1) + W_CIF - (__s32)rect.width, 1,
|
|
&rect.top, DEF_VSTRT << 1,
|
|
(DEF_VSTRT << 1) + H_CIF - (__s32)rect.height, 1,
|
|
0);
|
|
|
|
ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1);
|
|
if (!ret) {
|
|
priv->rect.left = rect.left;
|
|
ret = ov6650_reg_write(client, REG_HSTOP,
|
|
(rect.left + rect.width) >> 1);
|
|
}
|
|
if (!ret) {
|
|
priv->rect.width = rect.width;
|
|
ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1);
|
|
}
|
|
if (!ret) {
|
|
priv->rect.top = rect.top;
|
|
ret = ov6650_reg_write(client, REG_VSTOP,
|
|
(rect.top + rect.height) >> 1);
|
|
}
|
|
if (!ret)
|
|
priv->rect.height = rect.height;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov6650_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
if (format->pad)
|
|
return -EINVAL;
|
|
|
|
mf->width = priv->rect.width >> priv->half_scale;
|
|
mf->height = priv->rect.height >> priv->half_scale;
|
|
mf->code = priv->code;
|
|
mf->colorspace = priv->colorspace;
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
|
|
{
|
|
return width > rect->width >> 1 || height > rect->height >> 1;
|
|
}
|
|
|
|
static u8 to_clkrc(struct v4l2_fract *timeperframe,
|
|
unsigned long pclk_limit, unsigned long pclk_max)
|
|
{
|
|
unsigned long pclk;
|
|
|
|
if (timeperframe->numerator && timeperframe->denominator)
|
|
pclk = pclk_max * timeperframe->denominator /
|
|
(FRAME_RATE_MAX * timeperframe->numerator);
|
|
else
|
|
pclk = pclk_max;
|
|
|
|
if (pclk_limit && pclk_limit < pclk)
|
|
pclk = pclk_limit;
|
|
|
|
return (pclk_max - 1) / pclk;
|
|
}
|
|
|
|
/* set the format we will capture in */
|
|
static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
|
|
struct v4l2_subdev_selection sel = {
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.target = V4L2_SEL_TGT_CROP,
|
|
.r.left = priv->rect.left + (priv->rect.width >> 1) -
|
|
(mf->width >> (1 - half_scale)),
|
|
.r.top = priv->rect.top + (priv->rect.height >> 1) -
|
|
(mf->height >> (1 - half_scale)),
|
|
.r.width = mf->width << half_scale,
|
|
.r.height = mf->height << half_scale,
|
|
};
|
|
u32 code = mf->code;
|
|
unsigned long mclk, pclk;
|
|
u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask, clkrc;
|
|
int ret;
|
|
|
|
/* select color matrix configuration for given color encoding */
|
|
switch (code) {
|
|
case MEDIA_BUS_FMT_Y8_1X8:
|
|
dev_dbg(&client->dev, "pixel format GREY8_1X8\n");
|
|
coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP;
|
|
coma_set |= COMA_BW;
|
|
break;
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
|
dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n");
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP;
|
|
coma_set |= COMA_WORD_SWAP;
|
|
break;
|
|
case MEDIA_BUS_FMT_YVYU8_2X8:
|
|
dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n");
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP |
|
|
COMA_BYTE_SWAP;
|
|
break;
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
|
dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n");
|
|
if (half_scale) {
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
|
|
coma_set |= COMA_BYTE_SWAP;
|
|
} else {
|
|
coma_mask |= COMA_RGB | COMA_BW;
|
|
coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
|
|
}
|
|
break;
|
|
case MEDIA_BUS_FMT_VYUY8_2X8:
|
|
dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n");
|
|
if (half_scale) {
|
|
coma_mask |= COMA_RGB | COMA_BW;
|
|
coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
|
|
} else {
|
|
coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
|
|
coma_set |= COMA_BYTE_SWAP;
|
|
}
|
|
break;
|
|
case MEDIA_BUS_FMT_SBGGR8_1X8:
|
|
dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n");
|
|
coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
|
|
coma_set |= COMA_RAW_RGB | COMA_RGB;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
|
|
return -EINVAL;
|
|
}
|
|
priv->code = code;
|
|
|
|
if (code == MEDIA_BUS_FMT_Y8_1X8 ||
|
|
code == MEDIA_BUS_FMT_SBGGR8_1X8) {
|
|
coml_mask = COML_ONE_CHANNEL;
|
|
coml_set = 0;
|
|
priv->pclk_max = 4000000;
|
|
} else {
|
|
coml_mask = 0;
|
|
coml_set = COML_ONE_CHANNEL;
|
|
priv->pclk_max = 8000000;
|
|
}
|
|
|
|
if (code == MEDIA_BUS_FMT_SBGGR8_1X8)
|
|
priv->colorspace = V4L2_COLORSPACE_SRGB;
|
|
else if (code != 0)
|
|
priv->colorspace = V4L2_COLORSPACE_JPEG;
|
|
|
|
if (half_scale) {
|
|
dev_dbg(&client->dev, "max resolution: QCIF\n");
|
|
coma_set |= COMA_QCIF;
|
|
priv->pclk_max /= 2;
|
|
} else {
|
|
dev_dbg(&client->dev, "max resolution: CIF\n");
|
|
coma_mask |= COMA_QCIF;
|
|
}
|
|
priv->half_scale = half_scale;
|
|
|
|
clkrc = CLKRC_12MHz;
|
|
mclk = 12000000;
|
|
priv->pclk_limit = 1334000;
|
|
dev_dbg(&client->dev, "using 12MHz input clock\n");
|
|
|
|
clkrc |= to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max);
|
|
|
|
pclk = priv->pclk_max / GET_CLKRC_DIV(clkrc);
|
|
dev_dbg(&client->dev, "pixel clock divider: %ld.%ld\n",
|
|
mclk / pclk, 10 * mclk % pclk / pclk);
|
|
|
|
ret = ov6650_set_selection(sd, NULL, &sel);
|
|
if (!ret)
|
|
ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
|
|
if (!ret)
|
|
ret = ov6650_reg_write(client, REG_CLKRC, clkrc);
|
|
if (!ret)
|
|
ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask);
|
|
|
|
if (!ret) {
|
|
mf->colorspace = priv->colorspace;
|
|
mf->width = priv->rect.width >> half_scale;
|
|
mf->height = priv->rect.height >> half_scale;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int ov6650_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
if (format->pad)
|
|
return -EINVAL;
|
|
|
|
if (is_unscaled_ok(mf->width, mf->height, &priv->rect))
|
|
v4l_bound_align_image(&mf->width, 2, W_CIF, 1,
|
|
&mf->height, 2, H_CIF, 1, 0);
|
|
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
switch (mf->code) {
|
|
case MEDIA_BUS_FMT_Y10_1X10:
|
|
mf->code = MEDIA_BUS_FMT_Y8_1X8;
|
|
/* fall through */
|
|
case MEDIA_BUS_FMT_Y8_1X8:
|
|
case MEDIA_BUS_FMT_YVYU8_2X8:
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
|
case MEDIA_BUS_FMT_VYUY8_2X8:
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
|
mf->colorspace = V4L2_COLORSPACE_JPEG;
|
|
break;
|
|
default:
|
|
mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
|
|
/* fall through */
|
|
case MEDIA_BUS_FMT_SBGGR8_1X8:
|
|
mf->colorspace = V4L2_COLORSPACE_SRGB;
|
|
break;
|
|
}
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return ov6650_s_fmt(sd, mf);
|
|
cfg->try_fmt = *mf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov6650_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->pad || code->index >= ARRAY_SIZE(ov6650_codes))
|
|
return -EINVAL;
|
|
|
|
code->code = ov6650_codes[code->index];
|
|
return 0;
|
|
}
|
|
|
|
static int ov6650_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
memset(cp, 0, sizeof(*cp));
|
|
cp->capability = V4L2_CAP_TIMEPERFRAME;
|
|
cp->timeperframe.numerator = GET_CLKRC_DIV(to_clkrc(&priv->tpf,
|
|
priv->pclk_limit, priv->pclk_max));
|
|
cp->timeperframe.denominator = FRAME_RATE_MAX;
|
|
|
|
dev_dbg(&client->dev, "Frame interval: %u/%u s\n",
|
|
cp->timeperframe.numerator, cp->timeperframe.denominator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov6650_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
struct v4l2_fract *tpf = &cp->timeperframe;
|
|
int div, ret;
|
|
u8 clkrc;
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
if (cp->extendedmode != 0)
|
|
return -EINVAL;
|
|
|
|
if (tpf->numerator == 0 || tpf->denominator == 0)
|
|
div = 1; /* Reset to full rate */
|
|
else
|
|
div = (tpf->numerator * FRAME_RATE_MAX) / tpf->denominator;
|
|
|
|
if (div == 0)
|
|
div = 1;
|
|
else if (div > GET_CLKRC_DIV(CLKRC_DIV_MASK))
|
|
div = GET_CLKRC_DIV(CLKRC_DIV_MASK);
|
|
|
|
/*
|
|
* Keep result to be used as tpf limit
|
|
* for subseqent clock divider calculations
|
|
*/
|
|
priv->tpf.numerator = div;
|
|
priv->tpf.denominator = FRAME_RATE_MAX;
|
|
|
|
clkrc = to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max);
|
|
|
|
ret = ov6650_reg_rmw(client, REG_CLKRC, clkrc, CLKRC_DIV_MASK);
|
|
if (!ret) {
|
|
tpf->numerator = GET_CLKRC_DIV(clkrc);
|
|
tpf->denominator = FRAME_RATE_MAX;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Soft reset the camera. This has nothing to do with the RESET pin! */
|
|
static int ov6650_reset(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "reset\n");
|
|
|
|
ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
|
|
if (ret)
|
|
dev_err(&client->dev,
|
|
"An error occurred while entering soft reset!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* program default register values */
|
|
static int ov6650_prog_dflt(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "initializing\n");
|
|
|
|
ret = ov6650_reg_write(client, REG_COMA, 0); /* ~COMA_RESET */
|
|
if (!ret)
|
|
ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_BAND_FILTER);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov6650_video_probe(struct i2c_client *client)
|
|
{
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
u8 pidh, pidl, midh, midl;
|
|
int ret;
|
|
|
|
ret = ov6650_s_power(&priv->subdev, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* check and show product ID and manufacturer ID
|
|
*/
|
|
ret = ov6650_reg_read(client, REG_PIDH, &pidh);
|
|
if (!ret)
|
|
ret = ov6650_reg_read(client, REG_PIDL, &pidl);
|
|
if (!ret)
|
|
ret = ov6650_reg_read(client, REG_MIDH, &midh);
|
|
if (!ret)
|
|
ret = ov6650_reg_read(client, REG_MIDL, &midl);
|
|
|
|
if (ret)
|
|
goto done;
|
|
|
|
if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) {
|
|
dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n",
|
|
pidh, pidl);
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"ov6650 Product ID 0x%02x:0x%02x Manufacturer ID 0x%02x:0x%02x\n",
|
|
pidh, pidl, midh, midl);
|
|
|
|
ret = ov6650_reset(client);
|
|
if (!ret)
|
|
ret = ov6650_prog_dflt(client);
|
|
if (!ret)
|
|
ret = v4l2_ctrl_handler_setup(&priv->hdl);
|
|
|
|
done:
|
|
ov6650_s_power(&priv->subdev, 0);
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops ov6550_ctrl_ops = {
|
|
.g_volatile_ctrl = ov6550_g_volatile_ctrl,
|
|
.s_ctrl = ov6550_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops ov6650_core_ops = {
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = ov6650_get_register,
|
|
.s_register = ov6650_set_register,
|
|
#endif
|
|
.s_power = ov6650_s_power,
|
|
};
|
|
|
|
/* Request bus settings on camera side */
|
|
static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
|
|
cfg->flags = V4L2_MBUS_MASTER |
|
|
V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
|
|
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
|
|
V4L2_MBUS_DATA_ACTIVE_HIGH;
|
|
cfg->type = V4L2_MBUS_PARALLEL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Alter bus settings on camera side */
|
|
static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
|
|
const struct v4l2_mbus_config *cfg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
|
|
if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
|
|
else
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
|
|
ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
|
|
else
|
|
ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
|
|
else
|
|
ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops ov6650_video_ops = {
|
|
.s_stream = ov6650_s_stream,
|
|
.g_parm = ov6650_g_parm,
|
|
.s_parm = ov6650_s_parm,
|
|
.g_mbus_config = ov6650_g_mbus_config,
|
|
.s_mbus_config = ov6650_s_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops ov6650_pad_ops = {
|
|
.enum_mbus_code = ov6650_enum_mbus_code,
|
|
.get_selection = ov6650_get_selection,
|
|
.set_selection = ov6650_set_selection,
|
|
.get_fmt = ov6650_get_fmt,
|
|
.set_fmt = ov6650_set_fmt,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops ov6650_subdev_ops = {
|
|
.core = &ov6650_core_ops,
|
|
.video = &ov6650_video_ops,
|
|
.pad = &ov6650_pad_ops,
|
|
};
|
|
|
|
/*
|
|
* i2c_driver function
|
|
*/
|
|
static int ov6650_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *did)
|
|
{
|
|
struct ov6650 *priv;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(&client->dev,
|
|
"Failed to allocate memory for private data!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops);
|
|
v4l2_ctrl_handler_init(&priv->hdl, 13);
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
|
|
priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN);
|
|
priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
|
|
priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE);
|
|
priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED);
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_SATURATION, 0, 0xf, 1, 0x8);
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE);
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80);
|
|
priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl,
|
|
&ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
|
|
V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
|
|
priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH);
|
|
v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
|
|
V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
|
|
|
|
priv->subdev.ctrl_handler = &priv->hdl;
|
|
if (priv->hdl.error)
|
|
return priv->hdl.error;
|
|
|
|
v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
|
|
v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
|
|
v4l2_ctrl_auto_cluster(2, &priv->autoexposure,
|
|
V4L2_EXPOSURE_MANUAL, true);
|
|
|
|
priv->rect.left = DEF_HSTRT << 1;
|
|
priv->rect.top = DEF_VSTRT << 1;
|
|
priv->rect.width = W_CIF;
|
|
priv->rect.height = H_CIF;
|
|
priv->half_scale = false;
|
|
priv->code = MEDIA_BUS_FMT_YUYV8_2X8;
|
|
priv->colorspace = V4L2_COLORSPACE_JPEG;
|
|
|
|
priv->clk = v4l2_clk_get(&client->dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
ret = PTR_ERR(priv->clk);
|
|
goto eclkget;
|
|
}
|
|
|
|
ret = ov6650_video_probe(client);
|
|
if (ret) {
|
|
v4l2_clk_put(priv->clk);
|
|
eclkget:
|
|
v4l2_ctrl_handler_free(&priv->hdl);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov6650_remove(struct i2c_client *client)
|
|
{
|
|
struct ov6650 *priv = to_ov6650(client);
|
|
|
|
v4l2_clk_put(priv->clk);
|
|
v4l2_device_unregister_subdev(&priv->subdev);
|
|
v4l2_ctrl_handler_free(&priv->hdl);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ov6650_id[] = {
|
|
{ "ov6650", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ov6650_id);
|
|
|
|
static struct i2c_driver ov6650_i2c_driver = {
|
|
.driver = {
|
|
.name = "ov6650",
|
|
},
|
|
.probe = ov6650_probe,
|
|
.remove = ov6650_remove,
|
|
.id_table = ov6650_id,
|
|
};
|
|
|
|
module_i2c_driver(ov6650_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV6650");
|
|
MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
|
|
MODULE_LICENSE("GPL v2");
|