53 lines
2.0 KiB
Plaintext
53 lines
2.0 KiB
Plaintext
* Renesas R-Car generation 3 USB 3.0 PHY
|
|
|
|
This file provides information on what the device node for the R-Car generation
|
|
3 and RZ/G2 USB 3.0 PHY contain.
|
|
If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
|
|
instead of USB3_CLK. However, if you don't want to these features, you don't
|
|
need this driver.
|
|
|
|
Required properties:
|
|
- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
|
|
SoC.
|
|
"renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
|
|
SoC.
|
|
"renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
|
|
SoC.
|
|
"renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
|
|
SoC.
|
|
"renesas,r8a77965-usb3-phy" if the device is a part of an
|
|
R8A77965 SoC.
|
|
"renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
|
|
compatible device.
|
|
|
|
When compatible with the generic version, nodes must list the
|
|
SoC-specific version corresponding to the platform first
|
|
followed by the generic version.
|
|
|
|
- reg: offset and length of the USB 3.0 PHY register block.
|
|
- clocks: A list of phandles and clock-specifier pairs.
|
|
- clock-names: Name of the clocks.
|
|
- The funcional clock must be "usb3-if".
|
|
- The usb3's external clock must be "usb3s_clk".
|
|
- The usb2's external clock must be "usb_extal". If you want to use the ssc,
|
|
the clock-frequency must not be 0.
|
|
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
|
|
|
|
Optional properties:
|
|
- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
|
|
the following values as u32:
|
|
- 0 (or the property doesn't exist): disable the ssc
|
|
- 4980: enable the ssc as -4980 ppm
|
|
- 4492: enable the ssc as -4492 ppm
|
|
- 4003: enable the ssc as -4003 ppm
|
|
|
|
Example (R-Car H3):
|
|
|
|
usb-phy@e65ee000 {
|
|
compatible = "renesas,r8a7795-usb3-phy",
|
|
"renesas,rcar-gen3-usb3-phy";
|
|
reg = <0 0xe65ee000 0 0x90>;
|
|
clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
|
|
clock-names = "usb3-if", "usb3s_clk", "usb_extal";
|
|
};
|