OpenCloudOS-Kernel/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt

71 lines
2.4 KiB
Plaintext

Cadence Sierra PHY
-----------------------
Required properties:
- compatible: Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
- resets: Must contain an entry for each in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include "sierra_reset" and "sierra_apb".
"sierra_reset" must control the reset line to the PHY.
"sierra_apb" must control the reset line to the APB PHY
interface ("sierra_apb" is optional).
- reg: register range for the PHY.
- #address-cells: Must be 1
- #size-cells: Must be 0
Optional properties:
- clocks: Must contain an entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must contain "cmn_refclk_dig_div" and
"cmn_refclk1_dig_div" for configuring the frequency of
the clock to the lanes. "phy_clk" is deprecated.
- cdns,autoconf: A boolean property whose presence indicates that the
PHY registers will be configured by hardware. If not
present, all sub-node optional properties must be
provided.
Sub-nodes:
Each group of PHY lanes with a single master lane should be represented as
a sub-node. Note that the actual configuration of each lane is determined by
hardware strapping, and must match the configuration specified here.
Sub-node required properties:
- #phy-cells: Generic PHY binding; must be 0.
- reg: The master lane number. This is the lowest numbered lane
in the lane group.
- resets: Must contain one entry which controls the reset line for the
master lane of the sub-node.
See ../reset/reset.txt for details.
Sub-node optional properties:
- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The
group is made up of consecutive lanes.
- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
configuration of lanes.
Example:
pcie_phy4: pcie-phy@fd240000 {
compatible = "cdns,sierra-phy-t0";
reg = <0x0 0xfd240000 0x0 0x40000>;
resets = <&phyrst 0>, <&phyrst 1>;
reset-names = "sierra_reset", "sierra_apb";
clocks = <&phyclock>;
clock-names = "phy_clk";
#address-cells = <1>;
#size-cells = <0>;
pcie0_phy0: pcie-phy@0 {
reg = <0>;
resets = <&phyrst 2>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
};
pcie0_phy1: pcie-phy@2 {
reg = <2>;
resets = <&phyrst 4>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
cdns,phy-type = <PHY_TYPE_PCIE>;
};