OpenCloudOS-Kernel/Documentation/devicetree/bindings/ata/sata-common.yaml

51 lines
1.3 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/sata-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common Properties for Serial AT attachment (SATA) controllers
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
This document defines device tree properties common to most Serial
AT attachment (SATA) storage devices. It doesn't constitute a device tree
binding specification by itself but is meant to be referenced by device
tree bindings.
The SATA controller-specific device tree bindings are responsible for
defining whether each property is required or optional.
properties:
$nodename:
pattern: "^sata(@.*)?$"
description:
Specifies the host controller node. SATA host controller nodes are named
"sata"
"#address-cells":
const: 1
"#size-cells":
const: 0
patternProperties:
"^sata-port@[0-9a-e]$":
description: |
DT nodes for ports connected on the SATA host. The SATA port
nodes will be named "sata-port".
type: object
properties:
reg:
minimum: 0
maximum: 14
description:
The ID number of the drive port SATA can potentially use a port
multiplier making it possible to connect up to 15 disks to a single
SATA port.
...