OpenCloudOS-Kernel/drivers/ata
Nicolai Stange e185934ff9 libata-scsi: disable SCT Write Same for the moment
SCT Write Same support had been introduced with
commit 7b20309428 ("libata: Add support for SCT Write Same")

Some problems, namely excessive userspace segfaults, had been reported at

  http://lkml.kernel.org/r/20160908192736.GA4356@gmail.com

This lead to commit 0ce1b18c42 ("libata: Some drives failing on
SCT Write Same") which strived to disable SCT Write Same on !ZAC devices.
Due to the way this was done and to the logic in sd_config_write_same(),
this didn't work for those devices that have
->max_ws_blocks > SD_MAX_WS10_BLOCKS: for these, ->no_write_same and
->max_write_same_sectors would still be non-zero,
but ->ws10 == ->ws16 == 0. This would cause sd_setup_write_same_cmnd() to
demultiplex REQ_OP_WRITE_SAME requests to WRITE_SAME, and these in turn
aren't supported by libata-scsi:

  EXT4-fs (dm-1): Delayed block allocation failed for inode 2625094 at
                  logical offset 2032 with max blocks 2 with error 121
  EXT4-fs (dm-1): This should not happen!! Data will be lost

121 == EREMOTEIO is what scsi_io_completion() asserts in case of
invalid opcodes.

Back to the original problem of userspace segfaults: this can be tracked
down to ata_format_sct_write_same() overwriting the input page. Sometimes,
this page is ZERO_PAGE(0) which ceases to be filled with zeros from that
point on. Since ZERO_PAGE(0) is used for userspace .bss mappings, code of
the following is doomed:

  static char *a = NULL; /* .bss */
  ...
  if (a)
    *a = 'a';

This problem is not solved by disabling SCT Write Same for !ZAC devices
only.

It can certainly be fixed, but the final release is quite close -- so
disable SCT Write Same for all ATA devices rather than introducing some
SCT key buffer allocation schemes at this point.

Fixes: 7b20309428 ("libata: Add support for SCT Write Same")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-07 16:29:09 -05:00
..
Kconfig ata: ahci_brcm: Add support for Broadcom NSP SoC 2016-06-16 16:24:55 -04:00
Makefile ata: ahci_brcmstb: rename to support across Broadcom SoC's 2016-06-16 16:24:55 -04:00
acard-ahci.c ahci: Store irq number in struct ahci_host_priv 2015-06-03 01:37:49 -04:00
ahci.c ahci: always fall back to single-MSI mode 2016-11-21 11:06:57 -05:00
ahci.h ahci: use pci_alloc_irq_vectors 2016-09-06 12:38:17 -04:00
ahci_brcm.c ata: ahci_brcm: Add support for Broadcom NSP SoC 2016-06-16 16:24:55 -04:00
ahci_ceva.c drivers: ata: add support for Ceva sata host controller 2015-06-10 11:15:17 +09:00
ahci_da850.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_imx.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_mvebu.c ata: ahci_mvebu: add support for Armada 3700 variant 2016-02-18 12:41:17 -05:00
ahci_octeon.c libata: support AHCI on OCTEON platform 2016-02-11 10:12:04 -05:00
ahci_platform.c ata: ahci-platform: Add ports-implemented DT bindings. 2016-04-01 10:30:30 -04:00
ahci_qoriq.c ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC" 2016-09-30 10:28:51 +02:00
ahci_seattle.c ata: fix return value check in ahci_seattle_get_port_info() 2016-06-15 14:26:41 -04:00
ahci_st.c ahci: st: Add ports-implemented property in support 2016-08-10 12:16:49 -04:00
ahci_sunxi.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_tegra.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_xgene.c ata: ahci_xgene: dereferencing uninitialized pointer in probe 2016-03-11 12:40:34 -05:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata_piix: Add Device IDs for Intel 9 Series PCH 2014-08-28 08:53:40 -04:00
libahci.c ahci: use pci_alloc_irq_vectors 2016-09-06 12:38:17 -04:00
libahci_platform.c ahci: Store irq number in struct ahci_host_priv 2015-06-03 01:37:49 -04:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c New LED class driver: 2016-07-27 14:03:52 -07:00
libata-eh.c Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2016-07-26 14:39:40 -07:00
libata-pmp.c ata: pmp: add quirk for Marvell 4140 SATA PMP 2015-07-14 17:46:38 -04:00
libata-scsi.c libata-scsi: disable SCT Write Same for the moment 2016-12-07 16:29:09 -05:00
libata-sff.c libata: fix sff host state machine locking while polling 2016-02-01 11:33:21 -05:00
libata-trace.c libata: NCQ encapsulation for ZAC MANAGEMENT OUT 2016-05-09 12:36:46 -04:00
libata-transport.c ata: fix "ering" sysfs time printing 2016-06-17 12:07:11 -04:00
libata-transport.h [libata] Add ATA transport class 2010-10-21 20:21:03 -04:00
libata-zpodd.c libata: zpodd: eliminate odd_can_poweroff 2014-03-14 11:23:47 -04:00
libata.h libata: Implement control mode page to select sense format 2016-04-04 12:07:41 -04:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_amd.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_arasan_cf.c drivers: ata: pata_arasan_cf: use the same name for the same lock 2016-06-28 12:49:40 -04:00
pata_artop.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_at32.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_at91.c pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR 2016-09-22 11:48:46 -04:00
pata_atiixp.c pata_atiixp: fix trivial indentation misalignment on if statement 2016-05-27 11:22:46 -04:00
pata_atp867x.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_bf54x.c gpio: Include linux/gpio.h instead of asm/gpio.h 2016-02-16 00:20:03 +01:00
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5520.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_cs5530.c ata: Delete unnecessary checks before the function call "pci_dev_put" 2015-02-03 07:04:44 -05:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_hpt37x.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt366.c ata: hpt366: fix incorrect mask when checking at cmd_high_time 2016-07-12 11:02:05 -04:00
pata_icside.c scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS 2016-04-15 16:53:14 -04:00
pata_imx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_isapnp.c PNP: ata/pata_isapnp: Use module_pnp_driver to register driver 2015-03-18 22:39:17 +01:00
pata_it821x.c pata_it821x: use "const char *" for string literals 2015-10-15 10:58:53 -04:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_jmicron.c PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI 2015-08-24 15:27:11 -05:00
pata_legacy.c pata_legacy: Remove dead code 2014-03-11 08:30:53 -04:00
pata_macio.c PCI: Remove includes of asm/pci-bridge.h 2016-02-05 16:29:28 -06:00
pata_marvell.c ata: Use IS_ENABLED() instead of checking for built-in or module 2016-05-27 11:27:23 -04:00
pata_mpc52xx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c pata_ninja32: Avoid corrupting status flags 2016-08-30 11:59:47 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c ata: Replace BUG() with BUG_ON(). 2016-09-22 11:46:52 -04:00
pata_of_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_pcmcia.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_pxa.c ata: pata_pxa: dmaengine conversion 2015-09-10 17:02:04 -04:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c pata-rb532-cf: get rid of the irq_to_gpio() call 2016-02-18 11:26:27 -05:00
pata_rdc.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c libata: samsung_cf: fix handling platform_get_irq result 2015-09-25 11:50:15 -04:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sch.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_serverworks.c pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller 2014-10-07 17:10:14 -04:00
pata_sil680.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pdc_adma.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_dwc_460ex.c ata: sata_dwc_460ex: remove redundant dev_err call 2016-07-19 14:32:04 -04:00
sata_fsl.c ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads 2015-12-07 10:25:57 -05:00
sata_highbank.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
sata_inic162x.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_mv.c ata: sata_mv: check for errors when parsing nr-ports from dt 2016-11-29 11:35:06 -05:00
sata_nv.c ata:sata_nv - Change 1 to true for bool type variable. 2015-05-25 20:06:55 -04:00
sata_promise.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_promise.h
sata_qstor.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_rcar.c ata: sata_rcar: Remove obsolete platform_device_id entries 2015-11-24 09:54:36 -05:00
sata_sil.c sata_sil: disable trim 2015-11-30 10:02:49 -05:00
sata_sil24.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_svw.c powerpc updates for 4.1 2015-04-16 13:53:32 -05:00
sata_sx4.c sata_sx4: correctly handling failed allocation 2015-12-31 21:33:42 -05:00
sata_uli.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_via.c sata_via: Implement hotplug for VT6421 2016-02-25 13:22:16 -05:00
sata_vsc.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sis.h