Huang Shijie 2febcdf84b mtd: gpmi: set the BCH's geometry with the ecc info ... If the nand chip provides us the ECC info, we can use it firstly. The set_geometry_by_ecc_info() will use the ECC info, and calculate the parameters we need. Rename the old code to legacy_set_geometry() which will takes effect when there is no ECC info from the nand chip or we fails in the ECC info case. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>		2013-08-30 21:34:48 +01:00
..
Makefile	mtd: add GPMI-NAND driver in the config and Makefile	2011-09-11 15:02:18 +03:00
bch-regs.h	mtd: gpmi: set the Golois Field bit for mx6q's BCH	2013-02-04 10:27:59 +02:00
gpmi-lib.c	mtd: gpmi: set the Golois Field bit for mx6q's BCH	2013-02-04 10:27:59 +02:00
gpmi-nand.c	mtd: gpmi: set the BCH's geometry with the ecc info	2013-08-30 21:34:48 +01:00
gpmi-nand.h	mtd: gpmi: move to use generic DMA helper	2013-04-04 21:22:45 +08:00
gpmi-regs.h	mtd: gpmi: add a new field for HW_GPMI_CTRL1	2012-09-29 15:55:18 +01:00