574 lines
16 KiB
C
574 lines
16 KiB
C
/*
|
|
* core_intr.c - DesignWare HS OTG Controller common interrupt handling
|
|
*
|
|
* Copyright (C) 2004-2013 Synopsys, Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The names of the above-listed copyright holders may not be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation; either version 2 of the License, or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
|
|
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* This file contains the common interrupt handlers
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/ch11.h>
|
|
|
|
#include "core.h"
|
|
#include "hcd.h"
|
|
|
|
static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
|
|
{
|
|
switch (hsotg->op_state) {
|
|
case OTG_STATE_A_HOST:
|
|
return "a_host";
|
|
case OTG_STATE_A_SUSPEND:
|
|
return "a_suspend";
|
|
case OTG_STATE_A_PERIPHERAL:
|
|
return "a_peripheral";
|
|
case OTG_STATE_B_PERIPHERAL:
|
|
return "b_peripheral";
|
|
case OTG_STATE_B_HOST:
|
|
return "b_host";
|
|
default:
|
|
return "unknown";
|
|
}
|
|
}
|
|
|
|
/**
|
|
* dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
|
|
* When the PRTINT interrupt fires, there are certain status bits in the Host
|
|
* Port that needs to get cleared.
|
|
*
|
|
* @hsotg: Programming view of DWC_otg controller
|
|
*/
|
|
static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
|
|
|
|
if (hprt0 & HPRT0_ENACHG) {
|
|
hprt0 &= ~HPRT0_ENA;
|
|
dwc2_writel(hprt0, hsotg->regs + HPRT0);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
|
|
*
|
|
* @hsotg: Programming view of DWC_otg controller
|
|
*/
|
|
static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
/* Clear interrupt */
|
|
dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
|
|
|
|
dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
|
|
dwc2_is_host_mode(hsotg) ? "Host" : "Device");
|
|
}
|
|
|
|
/**
|
|
* dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
|
|
* Interrupt Register (GOTGINT) to determine what interrupt has occurred.
|
|
*
|
|
* @hsotg: Programming view of DWC_otg controller
|
|
*/
|
|
static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 gotgint;
|
|
u32 gotgctl;
|
|
u32 gintmsk;
|
|
|
|
gotgint = dwc2_readl(hsotg->regs + GOTGINT);
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
|
|
dwc2_op_state_str(hsotg));
|
|
|
|
if (gotgint & GOTGINT_SES_END_DET) {
|
|
dev_dbg(hsotg->dev,
|
|
" ++OTG Interrupt: Session End Detected++ (%s)\n",
|
|
dwc2_op_state_str(hsotg));
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
|
|
if (dwc2_is_device_mode(hsotg))
|
|
dwc2_hsotg_disconnect(hsotg);
|
|
|
|
if (hsotg->op_state == OTG_STATE_B_HOST) {
|
|
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
|
|
} else {
|
|
/*
|
|
* If not B_HOST and Device HNP still set, HNP did
|
|
* not succeed!
|
|
*/
|
|
if (gotgctl & GOTGCTL_DEVHNPEN) {
|
|
dev_dbg(hsotg->dev, "Session End Detected\n");
|
|
dev_err(hsotg->dev,
|
|
"Device Not Connected/Responding!\n");
|
|
}
|
|
|
|
/*
|
|
* If Session End Detected the B-Cable has been
|
|
* disconnected
|
|
*/
|
|
/* Reset to a clean state */
|
|
hsotg->lx_state = DWC2_L0;
|
|
}
|
|
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
gotgctl &= ~GOTGCTL_DEVHNPEN;
|
|
dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
|
|
}
|
|
|
|
if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
|
|
dev_dbg(hsotg->dev,
|
|
" ++OTG Interrupt: Session Request Success Status Change++\n");
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
if (gotgctl & GOTGCTL_SESREQSCS) {
|
|
if (hsotg->params.phy_type ==
|
|
DWC2_PHY_TYPE_PARAM_FS
|
|
&& hsotg->params.i2c_enable > 0) {
|
|
hsotg->srp_success = 1;
|
|
} else {
|
|
/* Clear Session Request */
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
gotgctl &= ~GOTGCTL_SESREQ;
|
|
dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
|
|
/*
|
|
* Print statements during the HNP interrupt handling
|
|
* can cause it to fail
|
|
*/
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
/*
|
|
* WA for 3.00a- HW is not setting cur_mode, even sometimes
|
|
* this does not help
|
|
*/
|
|
if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
|
|
udelay(100);
|
|
if (gotgctl & GOTGCTL_HSTNEGSCS) {
|
|
if (dwc2_is_host_mode(hsotg)) {
|
|
hsotg->op_state = OTG_STATE_B_HOST;
|
|
/*
|
|
* Need to disable SOF interrupt immediately.
|
|
* When switching from device to host, the PCD
|
|
* interrupt handler won't handle the interrupt
|
|
* if host mode is already set. The HCD
|
|
* interrupt handler won't get called if the
|
|
* HCD state is HALT. This means that the
|
|
* interrupt does not get handled and Linux
|
|
* complains loudly.
|
|
*/
|
|
gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
|
|
gintmsk &= ~GINTSTS_SOF;
|
|
dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
|
|
|
|
/*
|
|
* Call callback function with spin lock
|
|
* released
|
|
*/
|
|
spin_unlock(&hsotg->lock);
|
|
|
|
/* Initialize the Core for Host mode */
|
|
dwc2_hcd_start(hsotg);
|
|
spin_lock(&hsotg->lock);
|
|
hsotg->op_state = OTG_STATE_B_HOST;
|
|
}
|
|
} else {
|
|
gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
|
|
gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
|
|
dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
|
|
dev_dbg(hsotg->dev, "HNP Failed\n");
|
|
dev_err(hsotg->dev,
|
|
"Device Not Connected/Responding\n");
|
|
}
|
|
}
|
|
|
|
if (gotgint & GOTGINT_HST_NEG_DET) {
|
|
/*
|
|
* The disconnect interrupt is set at the same time as
|
|
* Host Negotiation Detected. During the mode switch all
|
|
* interrupts are cleared so the disconnect interrupt
|
|
* handler will not get executed.
|
|
*/
|
|
dev_dbg(hsotg->dev,
|
|
" ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
|
|
(dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
|
|
if (dwc2_is_device_mode(hsotg)) {
|
|
dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
|
|
hsotg->op_state);
|
|
spin_unlock(&hsotg->lock);
|
|
dwc2_hcd_disconnect(hsotg, false);
|
|
spin_lock(&hsotg->lock);
|
|
hsotg->op_state = OTG_STATE_A_PERIPHERAL;
|
|
} else {
|
|
/* Need to disable SOF interrupt immediately */
|
|
gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
|
|
gintmsk &= ~GINTSTS_SOF;
|
|
dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
|
|
spin_unlock(&hsotg->lock);
|
|
dwc2_hcd_start(hsotg);
|
|
spin_lock(&hsotg->lock);
|
|
hsotg->op_state = OTG_STATE_A_HOST;
|
|
}
|
|
}
|
|
|
|
if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
|
|
dev_dbg(hsotg->dev,
|
|
" ++OTG Interrupt: A-Device Timeout Change++\n");
|
|
if (gotgint & GOTGINT_DBNCE_DONE)
|
|
dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
|
|
|
|
/* Clear GOTGINT */
|
|
dwc2_writel(gotgint, hsotg->regs + GOTGINT);
|
|
}
|
|
|
|
/**
|
|
* dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
|
|
* Change Interrupt
|
|
*
|
|
* @hsotg: Programming view of DWC_otg controller
|
|
*
|
|
* Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
|
|
* Device to Host Mode transition or a Host to Device Mode transition. This only
|
|
* occurs when the cable is connected/removed from the PHY connector.
|
|
*/
|
|
static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 gintmsk;
|
|
|
|
/* Clear interrupt */
|
|
dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
|
|
|
|
/* Need to disable SOF interrupt immediately */
|
|
gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
|
|
gintmsk &= ~GINTSTS_SOF;
|
|
dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
|
|
|
|
dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n",
|
|
dwc2_is_host_mode(hsotg) ? "Host" : "Device");
|
|
|
|
/*
|
|
* Need to schedule a work, as there are possible DELAY function calls.
|
|
* Release lock before scheduling workq as it holds spinlock during
|
|
* scheduling.
|
|
*/
|
|
if (hsotg->wq_otg) {
|
|
spin_unlock(&hsotg->lock);
|
|
queue_work(hsotg->wq_otg, &hsotg->wf_otg);
|
|
spin_lock(&hsotg->lock);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* dwc2_handle_session_req_intr() - This interrupt indicates that a device is
|
|
* initiating the Session Request Protocol to request the host to turn on bus
|
|
* power so a new session can begin
|
|
*
|
|
* @hsotg: Programming view of DWC_otg controller
|
|
*
|
|
* This handler responds by turning on bus power. If the DWC_otg controller is
|
|
* in low power mode, this handler brings the controller out of low power mode
|
|
* before turning on bus power.
|
|
*/
|
|
static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
int ret;
|
|
|
|
/* Clear interrupt */
|
|
dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
|
|
|
|
dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
|
|
hsotg->lx_state);
|
|
|
|
if (dwc2_is_device_mode(hsotg)) {
|
|
if (hsotg->lx_state == DWC2_L2) {
|
|
ret = dwc2_exit_hibernation(hsotg, true);
|
|
if (ret && (ret != -ENOTSUPP))
|
|
dev_err(hsotg->dev,
|
|
"exit hibernation failed\n");
|
|
}
|
|
|
|
/*
|
|
* Report disconnect if there is any previous session
|
|
* established
|
|
*/
|
|
dwc2_hsotg_disconnect(hsotg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This interrupt indicates that the DWC_otg controller has detected a
|
|
* resume or remote wakeup sequence. If the DWC_otg controller is in
|
|
* low power mode, the handler must brings the controller out of low
|
|
* power mode. The controller automatically begins resume signaling.
|
|
* The handler schedules a time to stop resume signaling.
|
|
*/
|
|
static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
int ret;
|
|
|
|
/* Clear interrupt */
|
|
dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
|
|
|
|
dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
|
|
dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
|
|
|
|
if (dwc2_is_device_mode(hsotg)) {
|
|
dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
|
|
dwc2_readl(hsotg->regs + DSTS));
|
|
if (hsotg->lx_state == DWC2_L2) {
|
|
u32 dctl = dwc2_readl(hsotg->regs + DCTL);
|
|
|
|
/* Clear Remote Wakeup Signaling */
|
|
dctl &= ~DCTL_RMTWKUPSIG;
|
|
dwc2_writel(dctl, hsotg->regs + DCTL);
|
|
ret = dwc2_exit_hibernation(hsotg, true);
|
|
if (ret && (ret != -ENOTSUPP))
|
|
dev_err(hsotg->dev, "exit hibernation failed\n");
|
|
|
|
call_gadget(hsotg, resume);
|
|
}
|
|
/* Change to L0 state */
|
|
hsotg->lx_state = DWC2_L0;
|
|
} else {
|
|
if (hsotg->params.hibernation)
|
|
return;
|
|
|
|
if (hsotg->lx_state != DWC2_L1) {
|
|
u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
|
|
|
|
/* Restart the Phy Clock */
|
|
pcgcctl &= ~PCGCTL_STOPPCLK;
|
|
dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
|
|
mod_timer(&hsotg->wkp_timer,
|
|
jiffies + msecs_to_jiffies(71));
|
|
} else {
|
|
/* Change to L0 state */
|
|
hsotg->lx_state = DWC2_L0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This interrupt indicates that a device has been disconnected from the
|
|
* root port
|
|
*/
|
|
static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
|
|
|
|
dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
|
|
dwc2_is_host_mode(hsotg) ? "Host" : "Device",
|
|
dwc2_op_state_str(hsotg));
|
|
|
|
if (hsotg->op_state == OTG_STATE_A_HOST)
|
|
dwc2_hcd_disconnect(hsotg, false);
|
|
}
|
|
|
|
/*
|
|
* This interrupt indicates that SUSPEND state has been detected on the USB.
|
|
*
|
|
* For HNP the USB Suspend interrupt signals the change from "a_peripheral"
|
|
* to "a_host".
|
|
*
|
|
* When power management is enabled the core will be put in low power mode.
|
|
*/
|
|
static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 dsts;
|
|
int ret;
|
|
|
|
/* Clear interrupt */
|
|
dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
|
|
|
|
dev_dbg(hsotg->dev, "USB SUSPEND\n");
|
|
|
|
if (dwc2_is_device_mode(hsotg)) {
|
|
/*
|
|
* Check the Device status register to determine if the Suspend
|
|
* state is active
|
|
*/
|
|
dsts = dwc2_readl(hsotg->regs + DSTS);
|
|
dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts);
|
|
dev_dbg(hsotg->dev,
|
|
"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n",
|
|
!!(dsts & DSTS_SUSPSTS),
|
|
hsotg->hw_params.power_optimized);
|
|
if ((dsts & DSTS_SUSPSTS) && hsotg->hw_params.power_optimized) {
|
|
/* Ignore suspend request before enumeration */
|
|
if (!dwc2_is_device_connected(hsotg)) {
|
|
dev_dbg(hsotg->dev,
|
|
"ignore suspend request before enumeration\n");
|
|
return;
|
|
}
|
|
|
|
ret = dwc2_enter_hibernation(hsotg);
|
|
if (ret) {
|
|
if (ret != -ENOTSUPP)
|
|
dev_err(hsotg->dev,
|
|
"enter hibernation failed\n");
|
|
goto skip_power_saving;
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
/* Ask phy to be suspended */
|
|
if (!IS_ERR_OR_NULL(hsotg->uphy))
|
|
usb_phy_set_suspend(hsotg->uphy, true);
|
|
skip_power_saving:
|
|
/*
|
|
* Change to L2 (suspend) state before releasing
|
|
* spinlock
|
|
*/
|
|
hsotg->lx_state = DWC2_L2;
|
|
|
|
/* Call gadget suspend callback */
|
|
call_gadget(hsotg, suspend);
|
|
}
|
|
} else {
|
|
if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
|
|
dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
|
|
|
|
/* Change to L2 (suspend) state */
|
|
hsotg->lx_state = DWC2_L2;
|
|
/* Clear the a_peripheral flag, back to a_host */
|
|
spin_unlock(&hsotg->lock);
|
|
dwc2_hcd_start(hsotg);
|
|
spin_lock(&hsotg->lock);
|
|
hsotg->op_state = OTG_STATE_A_HOST;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
|
|
GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \
|
|
GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \
|
|
GINTSTS_USBSUSP | GINTSTS_PRTINT)
|
|
|
|
/*
|
|
* This function returns the Core Interrupt register
|
|
*/
|
|
static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 gintsts;
|
|
u32 gintmsk;
|
|
u32 gahbcfg;
|
|
u32 gintmsk_common = GINTMSK_COMMON;
|
|
|
|
gintsts = dwc2_readl(hsotg->regs + GINTSTS);
|
|
gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
|
|
gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
|
|
|
|
/* If any common interrupts set */
|
|
if (gintsts & gintmsk_common)
|
|
dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n",
|
|
gintsts, gintmsk);
|
|
|
|
if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
|
|
return gintsts & gintmsk & gintmsk_common;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Common interrupt handler
|
|
*
|
|
* The common interrupts are those that occur in both Host and Device mode.
|
|
* This handler handles the following interrupts:
|
|
* - Mode Mismatch Interrupt
|
|
* - OTG Interrupt
|
|
* - Connector ID Status Change Interrupt
|
|
* - Disconnect Interrupt
|
|
* - Session Request Interrupt
|
|
* - Resume / Remote Wakeup Detected Interrupt
|
|
* - Suspend Interrupt
|
|
*/
|
|
irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
|
|
{
|
|
struct dwc2_hsotg *hsotg = dev;
|
|
u32 gintsts;
|
|
irqreturn_t retval = IRQ_NONE;
|
|
|
|
spin_lock(&hsotg->lock);
|
|
|
|
if (!dwc2_is_controller_alive(hsotg)) {
|
|
dev_warn(hsotg->dev, "Controller is dead\n");
|
|
goto out;
|
|
}
|
|
|
|
gintsts = dwc2_read_common_intr(hsotg);
|
|
if (gintsts & ~GINTSTS_PRTINT)
|
|
retval = IRQ_HANDLED;
|
|
|
|
if (gintsts & GINTSTS_MODEMIS)
|
|
dwc2_handle_mode_mismatch_intr(hsotg);
|
|
if (gintsts & GINTSTS_OTGINT)
|
|
dwc2_handle_otg_intr(hsotg);
|
|
if (gintsts & GINTSTS_CONIDSTSCHNG)
|
|
dwc2_handle_conn_id_status_change_intr(hsotg);
|
|
if (gintsts & GINTSTS_DISCONNINT)
|
|
dwc2_handle_disconnect_intr(hsotg);
|
|
if (gintsts & GINTSTS_SESSREQINT)
|
|
dwc2_handle_session_req_intr(hsotg);
|
|
if (gintsts & GINTSTS_WKUPINT)
|
|
dwc2_handle_wakeup_detected_intr(hsotg);
|
|
if (gintsts & GINTSTS_USBSUSP)
|
|
dwc2_handle_usb_suspend_intr(hsotg);
|
|
|
|
if (gintsts & GINTSTS_PRTINT) {
|
|
/*
|
|
* The port interrupt occurs while in device mode with HPRT0
|
|
* Port Enable/Disable
|
|
*/
|
|
if (dwc2_is_device_mode(hsotg)) {
|
|
dev_dbg(hsotg->dev,
|
|
" --Port interrupt received in Device mode--\n");
|
|
dwc2_handle_usb_port_intr(hsotg);
|
|
retval = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
out:
|
|
spin_unlock(&hsotg->lock);
|
|
return retval;
|
|
}
|