OpenCloudOS-Kernel/drivers/usb
Alan Stern 50c4e96411 scsi: don't store LUN bits in CDB[1] for USB mass-storage devices
The SCSI specification requires that the second Command Data Byte
should contain the LUN value in its high-order bits if the recipient
device reports SCSI level 2 or below.  Nevertheless, some USB
mass-storage devices use those bits for other purposes in
vendor-specific commands.  Currently Linux has no way to send such
commands, because the SCSI stack always overwrites the LUN bits.

Testing shows that Windows 7 and XP do not store the LUN bits in the
CDB when sending commands to a USB device.  This doesn't matter if the
device uses the Bulk-Only or UAS transports (which virtually all
modern USB mass-storage devices do), as these have a separate
mechanism for sending the LUN value.

Therefore this patch introduces a flag in the Scsi_Host structure to
inform the SCSI midlayer that a transport does not require the LUN
bits to be stored in the CDB, and it makes usb-storage set this flag
for all devices using the Bulk-Only transport.  (UAS is handled by a
separate driver, but it doesn't really matter because no SCSI-2 or
lower device is at all likely to use UAS.)

The patch also cleans up the code responsible for storing the LUN
value by adding a bitflag to the scsi_device structure.  The test for
whether to stick the LUN value in the CDB can be made when the device
is probed, and stored for future use rather than being made over and
over in the fast path.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Tiziano Bacocco <tiziano.bacocco@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15 16:01:58 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: msm: Initialize PHY on reset event 2014-09-10 17:30:39 -07:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
core usb: hub: take hub->hdev reference when processing from eventlist 2014-09-10 13:32:35 -07:00
dwc2 usb: dwc2/gadget: avoid disabling ep0 2014-09-09 10:17:48 -07:00
dwc3 usb: dwc3: fix TRB completion when multiple TRBs are started 2014-09-05 09:16:55 -05:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: gadget: f_fs: fix the redundant ep files problem 2014-09-03 09:15:59 -05:00
host xhci: fix oops when xhci resumes from hibernate with hw lpm capable devices 2014-09-11 14:23:52 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc USB: sisusb: add device id for Magic Control USB video 2014-08-26 12:07:46 -07:00
mon
musb usb: musb: cppi41: fix not transmitting zero length packet issue 2014-09-03 09:15:56 -05:00
phy usb: phy: tegra: Avoid use of sizeof(void) 2014-09-03 09:16:01 -05:00
renesas_usbhs usb: renesas_usbhs: fix the usb_pkt_pop() 2014-09-03 09:15:58 -05:00
serial USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device 2014-09-08 16:01:59 -07:00
storage scsi: don't store LUN bits in CDB[1] for USB mass-storage devices 2014-09-15 16:01:58 -07:00
usbip usbip: remove struct usb_device_id table 2014-08-25 10:40:58 -07:00
wusbcore usb: wusbcore: fix below build warning 2014-08-19 11:28:53 -05:00
Kconfig usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.