256 lines
7.2 KiB
C
256 lines
7.2 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
|
|
#include <asm/pci.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/addrspace.h>
|
|
|
|
#include <lantiq_soc.h>
|
|
#include <lantiq_irq.h>
|
|
|
|
#include "pci-lantiq.h"
|
|
|
|
#define PCI_CR_FCI_ADDR_MAP0 0x00C0
|
|
#define PCI_CR_FCI_ADDR_MAP1 0x00C4
|
|
#define PCI_CR_FCI_ADDR_MAP2 0x00C8
|
|
#define PCI_CR_FCI_ADDR_MAP3 0x00CC
|
|
#define PCI_CR_FCI_ADDR_MAP4 0x00D0
|
|
#define PCI_CR_FCI_ADDR_MAP5 0x00D4
|
|
#define PCI_CR_FCI_ADDR_MAP6 0x00D8
|
|
#define PCI_CR_FCI_ADDR_MAP7 0x00DC
|
|
#define PCI_CR_CLK_CTRL 0x0000
|
|
#define PCI_CR_PCI_MOD 0x0030
|
|
#define PCI_CR_PC_ARB 0x0080
|
|
#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
|
|
#define PCI_CR_BAR11MASK 0x0044
|
|
#define PCI_CR_BAR12MASK 0x0048
|
|
#define PCI_CR_BAR13MASK 0x004C
|
|
#define PCI_CS_BASE_ADDR1 0x0010
|
|
#define PCI_CR_PCI_ADDR_MAP11 0x0064
|
|
#define PCI_CR_FCI_BURST_LENGTH 0x00E8
|
|
#define PCI_CR_PCI_EOI 0x002C
|
|
#define PCI_CS_STS_CMD 0x0004
|
|
|
|
#define PCI_MASTER0_REQ_MASK_2BITS 8
|
|
#define PCI_MASTER1_REQ_MASK_2BITS 10
|
|
#define PCI_MASTER2_REQ_MASK_2BITS 12
|
|
#define INTERNAL_ARB_ENABLE_BIT 0
|
|
|
|
#define LTQ_CGU_IFCCR 0x0018
|
|
#define LTQ_CGU_PCICR 0x0034
|
|
|
|
#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
|
|
#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
|
|
|
|
#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
|
|
#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
|
|
|
|
__iomem void *ltq_pci_mapped_cfg;
|
|
static __iomem void *ltq_pci_membase;
|
|
|
|
static int reset_gpio;
|
|
static struct clk *clk_pci, *clk_external;
|
|
static struct resource pci_io_resource;
|
|
static struct resource pci_mem_resource;
|
|
static struct pci_ops pci_ops = {
|
|
.read = ltq_pci_read_config_dword,
|
|
.write = ltq_pci_write_config_dword
|
|
};
|
|
|
|
static struct pci_controller pci_controller = {
|
|
.pci_ops = &pci_ops,
|
|
.mem_resource = &pci_mem_resource,
|
|
.mem_offset = 0x00000000UL,
|
|
.io_resource = &pci_io_resource,
|
|
.io_offset = 0x00000000UL,
|
|
};
|
|
|
|
static inline u32 ltq_calc_bar11mask(void)
|
|
{
|
|
u32 mem, bar11mask;
|
|
|
|
/* BAR11MASK value depends on available memory on system. */
|
|
mem = num_physpages * PAGE_SIZE;
|
|
bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
|
|
|
|
return bar11mask;
|
|
}
|
|
|
|
static int __devinit ltq_pci_startup(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
const __be32 *req_mask, *bus_clk;
|
|
u32 temp_buffer;
|
|
|
|
/* get our clocks */
|
|
clk_pci = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk_pci)) {
|
|
dev_err(&pdev->dev, "failed to get pci clock\n");
|
|
return PTR_ERR(clk_pci);
|
|
}
|
|
|
|
clk_external = clk_get(&pdev->dev, "external");
|
|
if (IS_ERR(clk_external)) {
|
|
clk_put(clk_pci);
|
|
dev_err(&pdev->dev, "failed to get external pci clock\n");
|
|
return PTR_ERR(clk_external);
|
|
}
|
|
|
|
/* read the bus speed that we want */
|
|
bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
|
|
if (bus_clk)
|
|
clk_set_rate(clk_pci, *bus_clk);
|
|
|
|
/* and enable the clocks */
|
|
clk_enable(clk_pci);
|
|
if (of_find_property(node, "lantiq,external-clock", NULL))
|
|
clk_enable(clk_external);
|
|
else
|
|
clk_disable(clk_external);
|
|
|
|
/* setup reset gpio used by pci */
|
|
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
|
|
if (reset_gpio > 0)
|
|
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
|
|
|
|
/* enable auto-switching between PCI and EBU */
|
|
ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
|
|
|
|
/* busy, i.e. configuration is not done, PCI access has to be retried */
|
|
ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
|
|
wmb();
|
|
/* BUS Master/IO/MEM access */
|
|
ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
|
|
|
|
/* enable external 2 PCI masters */
|
|
temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
|
|
/* setup the request mask */
|
|
req_mask = of_get_property(node, "req-mask", NULL);
|
|
if (req_mask)
|
|
temp_buffer &= ~((*req_mask & 0xf) << 16);
|
|
else
|
|
temp_buffer &= ~0xf0000;
|
|
/* enable internal arbiter */
|
|
temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
|
|
/* enable internal PCI master reqest */
|
|
temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
|
|
|
|
/* enable EBU request */
|
|
temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
|
|
|
|
/* enable all external masters request */
|
|
temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
|
|
ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
|
|
wmb();
|
|
|
|
/* setup BAR memory regions */
|
|
ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
|
|
ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
|
|
ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
|
|
ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
|
|
ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
|
|
ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
|
|
ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
|
|
ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
|
|
ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
|
|
ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
|
|
ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
|
|
ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
|
|
/* both TX and RX endian swap are enabled */
|
|
ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
|
|
wmb();
|
|
ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
|
|
PCI_CR_BAR12MASK);
|
|
ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
|
|
PCI_CR_BAR13MASK);
|
|
/*use 8 dw burst length */
|
|
ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
|
|
ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
|
|
wmb();
|
|
|
|
/* setup irq line */
|
|
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
|
|
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
|
|
|
|
/* toggle reset pin */
|
|
if (reset_gpio > 0) {
|
|
__gpio_set_value(reset_gpio, 0);
|
|
wmb();
|
|
mdelay(1);
|
|
__gpio_set_value(reset_gpio, 1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit ltq_pci_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res_cfg, *res_bridge;
|
|
|
|
pci_clear_flags(PCI_PROBE_ONLY);
|
|
|
|
res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!res_cfg || !res_bridge) {
|
|
dev_err(&pdev->dev, "missing memory reources\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ltq_pci_membase = devm_request_and_ioremap(&pdev->dev, res_bridge);
|
|
ltq_pci_mapped_cfg = devm_request_and_ioremap(&pdev->dev, res_cfg);
|
|
|
|
if (!ltq_pci_membase || !ltq_pci_mapped_cfg) {
|
|
dev_err(&pdev->dev, "failed to remap resources\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ltq_pci_startup(pdev);
|
|
|
|
pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
|
|
register_pci_controller(&pci_controller);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ltq_pci_match[] = {
|
|
{ .compatible = "lantiq,pci-xway" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltq_pci_match);
|
|
|
|
static struct platform_driver ltq_pci_driver = {
|
|
.probe = ltq_pci_probe,
|
|
.driver = {
|
|
.name = "pci-xway",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = ltq_pci_match,
|
|
},
|
|
};
|
|
|
|
int __init pcibios_init(void)
|
|
{
|
|
int ret = platform_driver_register(<q_pci_driver);
|
|
if (ret)
|
|
pr_info("pci-xway: Error registering platform driver!");
|
|
return ret;
|
|
}
|
|
|
|
arch_initcall(pcibios_init);
|