427 lines
11 KiB
C
427 lines
11 KiB
C
#include <linux/errno.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/random.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/8253pit.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/timer.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/delay.h>
|
|
#include <asm/desc.h>
|
|
#include <asm/apic.h>
|
|
#include <asm/arch_hooks.h>
|
|
#include <asm/i8259.h>
|
|
|
|
#include <io_ports.h>
|
|
|
|
/*
|
|
* This is the 'legacy' 8259A Programmable Interrupt Controller,
|
|
* present in the majority of PC/AT boxes.
|
|
* plus some generic x86 specific things if generic specifics makes
|
|
* any sense at all.
|
|
* this file should become arch/i386/kernel/irq.c when the old irq.c
|
|
* moves to arch independent land
|
|
*/
|
|
|
|
static int i8259A_auto_eoi;
|
|
DEFINE_SPINLOCK(i8259A_lock);
|
|
static void mask_and_ack_8259A(unsigned int);
|
|
|
|
static struct irq_chip i8259A_chip = {
|
|
.name = "XT-PIC",
|
|
.mask = disable_8259A_irq,
|
|
.unmask = enable_8259A_irq,
|
|
.mask_ack = mask_and_ack_8259A,
|
|
};
|
|
|
|
/*
|
|
* 8259A PIC functions to handle ISA devices:
|
|
*/
|
|
|
|
/*
|
|
* This contains the irq mask for both 8259A irq controllers,
|
|
*/
|
|
unsigned int cached_irq_mask = 0xffff;
|
|
|
|
/*
|
|
* Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
|
|
* boards the timer interrupt is not really connected to any IO-APIC pin,
|
|
* it's fed to the master 8259A's IR0 line only.
|
|
*
|
|
* Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
|
|
* this 'mixed mode' IRQ handling costs nothing because it's only used
|
|
* at IRQ setup time.
|
|
*/
|
|
unsigned long io_apic_irqs;
|
|
|
|
void disable_8259A_irq(unsigned int irq)
|
|
{
|
|
unsigned int mask = 1 << irq;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&i8259A_lock, flags);
|
|
cached_irq_mask |= mask;
|
|
if (irq & 8)
|
|
outb(cached_slave_mask, PIC_SLAVE_IMR);
|
|
else
|
|
outb(cached_master_mask, PIC_MASTER_IMR);
|
|
spin_unlock_irqrestore(&i8259A_lock, flags);
|
|
}
|
|
|
|
void enable_8259A_irq(unsigned int irq)
|
|
{
|
|
unsigned int mask = ~(1 << irq);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&i8259A_lock, flags);
|
|
cached_irq_mask &= mask;
|
|
if (irq & 8)
|
|
outb(cached_slave_mask, PIC_SLAVE_IMR);
|
|
else
|
|
outb(cached_master_mask, PIC_MASTER_IMR);
|
|
spin_unlock_irqrestore(&i8259A_lock, flags);
|
|
}
|
|
|
|
int i8259A_irq_pending(unsigned int irq)
|
|
{
|
|
unsigned int mask = 1<<irq;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&i8259A_lock, flags);
|
|
if (irq < 8)
|
|
ret = inb(PIC_MASTER_CMD) & mask;
|
|
else
|
|
ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
|
|
spin_unlock_irqrestore(&i8259A_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void make_8259A_irq(unsigned int irq)
|
|
{
|
|
disable_irq_nosync(irq);
|
|
io_apic_irqs &= ~(1<<irq);
|
|
set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
|
|
"XT");
|
|
enable_irq(irq);
|
|
}
|
|
|
|
/*
|
|
* This function assumes to be called rarely. Switching between
|
|
* 8259A registers is slow.
|
|
* This has to be protected by the irq controller spinlock
|
|
* before being called.
|
|
*/
|
|
static inline int i8259A_irq_real(unsigned int irq)
|
|
{
|
|
int value;
|
|
int irqmask = 1<<irq;
|
|
|
|
if (irq < 8) {
|
|
outb(0x0B,PIC_MASTER_CMD); /* ISR register */
|
|
value = inb(PIC_MASTER_CMD) & irqmask;
|
|
outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */
|
|
return value;
|
|
}
|
|
outb(0x0B,PIC_SLAVE_CMD); /* ISR register */
|
|
value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
|
|
outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */
|
|
return value;
|
|
}
|
|
|
|
/*
|
|
* Careful! The 8259A is a fragile beast, it pretty
|
|
* much _has_ to be done exactly like this (mask it
|
|
* first, _then_ send the EOI, and the order of EOI
|
|
* to the two 8259s is important!
|
|
*/
|
|
static void mask_and_ack_8259A(unsigned int irq)
|
|
{
|
|
unsigned int irqmask = 1 << irq;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&i8259A_lock, flags);
|
|
/*
|
|
* Lightweight spurious IRQ detection. We do not want
|
|
* to overdo spurious IRQ handling - it's usually a sign
|
|
* of hardware problems, so we only do the checks we can
|
|
* do without slowing down good hardware unnecessarily.
|
|
*
|
|
* Note that IRQ7 and IRQ15 (the two spurious IRQs
|
|
* usually resulting from the 8259A-1|2 PICs) occur
|
|
* even if the IRQ is masked in the 8259A. Thus we
|
|
* can check spurious 8259A IRQs without doing the
|
|
* quite slow i8259A_irq_real() call for every IRQ.
|
|
* This does not cover 100% of spurious interrupts,
|
|
* but should be enough to warn the user that there
|
|
* is something bad going on ...
|
|
*/
|
|
if (cached_irq_mask & irqmask)
|
|
goto spurious_8259A_irq;
|
|
cached_irq_mask |= irqmask;
|
|
|
|
handle_real_irq:
|
|
if (irq & 8) {
|
|
inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */
|
|
outb(cached_slave_mask, PIC_SLAVE_IMR);
|
|
outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
|
|
outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
|
|
} else {
|
|
inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */
|
|
outb(cached_master_mask, PIC_MASTER_IMR);
|
|
outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
|
|
}
|
|
spin_unlock_irqrestore(&i8259A_lock, flags);
|
|
return;
|
|
|
|
spurious_8259A_irq:
|
|
/*
|
|
* this is the slow path - should happen rarely.
|
|
*/
|
|
if (i8259A_irq_real(irq))
|
|
/*
|
|
* oops, the IRQ _is_ in service according to the
|
|
* 8259A - not spurious, go handle it.
|
|
*/
|
|
goto handle_real_irq;
|
|
|
|
{
|
|
static int spurious_irq_mask;
|
|
/*
|
|
* At this point we can be sure the IRQ is spurious,
|
|
* lets ACK and report it. [once per IRQ]
|
|
*/
|
|
if (!(spurious_irq_mask & irqmask)) {
|
|
printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
|
|
spurious_irq_mask |= irqmask;
|
|
}
|
|
atomic_inc(&irq_err_count);
|
|
/*
|
|
* Theoretically we do not have to handle this IRQ,
|
|
* but in Linux this does not cause problems and is
|
|
* simpler for us.
|
|
*/
|
|
goto handle_real_irq;
|
|
}
|
|
}
|
|
|
|
static char irq_trigger[2];
|
|
/**
|
|
* ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
|
|
*/
|
|
static void restore_ELCR(char *trigger)
|
|
{
|
|
outb(trigger[0], 0x4d0);
|
|
outb(trigger[1], 0x4d1);
|
|
}
|
|
|
|
static void save_ELCR(char *trigger)
|
|
{
|
|
/* IRQ 0,1,2,8,13 are marked as reserved */
|
|
trigger[0] = inb(0x4d0) & 0xF8;
|
|
trigger[1] = inb(0x4d1) & 0xDE;
|
|
}
|
|
|
|
static int i8259A_resume(struct sys_device *dev)
|
|
{
|
|
init_8259A(i8259A_auto_eoi);
|
|
restore_ELCR(irq_trigger);
|
|
return 0;
|
|
}
|
|
|
|
static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
|
|
{
|
|
save_ELCR(irq_trigger);
|
|
return 0;
|
|
}
|
|
|
|
static int i8259A_shutdown(struct sys_device *dev)
|
|
{
|
|
/* Put the i8259A into a quiescent state that
|
|
* the kernel initialization code can get it
|
|
* out of.
|
|
*/
|
|
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
|
|
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class i8259_sysdev_class = {
|
|
set_kset_name("i8259"),
|
|
.suspend = i8259A_suspend,
|
|
.resume = i8259A_resume,
|
|
.shutdown = i8259A_shutdown,
|
|
};
|
|
|
|
static struct sys_device device_i8259A = {
|
|
.id = 0,
|
|
.cls = &i8259_sysdev_class,
|
|
};
|
|
|
|
static int __init i8259A_init_sysfs(void)
|
|
{
|
|
int error = sysdev_class_register(&i8259_sysdev_class);
|
|
if (!error)
|
|
error = sysdev_register(&device_i8259A);
|
|
return error;
|
|
}
|
|
|
|
device_initcall(i8259A_init_sysfs);
|
|
|
|
void init_8259A(int auto_eoi)
|
|
{
|
|
unsigned long flags;
|
|
|
|
i8259A_auto_eoi = auto_eoi;
|
|
|
|
spin_lock_irqsave(&i8259A_lock, flags);
|
|
|
|
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
|
|
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
|
|
|
|
/*
|
|
* outb_p - this has to work on a wide range of PC hardware.
|
|
*/
|
|
outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
|
|
outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
|
|
outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */
|
|
if (auto_eoi) /* master does Auto EOI */
|
|
outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
|
|
else /* master expects normal EOI */
|
|
outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
|
|
|
|
outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
|
|
outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
|
|
outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */
|
|
outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
|
|
if (auto_eoi)
|
|
/*
|
|
* In AEOI mode we just have to mask the interrupt
|
|
* when acking.
|
|
*/
|
|
i8259A_chip.mask_ack = disable_8259A_irq;
|
|
else
|
|
i8259A_chip.mask_ack = mask_and_ack_8259A;
|
|
|
|
udelay(100); /* wait for 8259A to initialize */
|
|
|
|
outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
|
|
outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
|
|
|
|
spin_unlock_irqrestore(&i8259A_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Note that on a 486, we don't want to do a SIGFPE on an irq13
|
|
* as the irq is unreliable, and exception 16 works correctly
|
|
* (ie as explained in the intel literature). On a 386, you
|
|
* can't use exception 16 due to bad IBM design, so we have to
|
|
* rely on the less exact irq13.
|
|
*
|
|
* Careful.. Not only is IRQ13 unreliable, but it is also
|
|
* leads to races. IBM designers who came up with it should
|
|
* be shot.
|
|
*/
|
|
|
|
|
|
static irqreturn_t math_error_irq(int cpl, void *dev_id)
|
|
{
|
|
extern void math_error(void __user *);
|
|
outb(0,0xF0);
|
|
if (ignore_fpu_irq || !boot_cpu_data.hard_math)
|
|
return IRQ_NONE;
|
|
math_error((void __user *)get_irq_regs()->eip);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* New motherboards sometimes make IRQ 13 be a PCI interrupt,
|
|
* so allow interrupt sharing.
|
|
*/
|
|
static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL };
|
|
|
|
void __init init_ISA_irqs (void)
|
|
{
|
|
int i;
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
|
init_bsp_APIC();
|
|
#endif
|
|
init_8259A(0);
|
|
|
|
for (i = 0; i < NR_IRQS; i++) {
|
|
irq_desc[i].status = IRQ_DISABLED;
|
|
irq_desc[i].action = NULL;
|
|
irq_desc[i].depth = 1;
|
|
|
|
if (i < 16) {
|
|
/*
|
|
* 16 old-style INTA-cycle interrupts:
|
|
*/
|
|
set_irq_chip_and_handler_name(i, &i8259A_chip,
|
|
handle_level_irq, "XT");
|
|
} else {
|
|
/*
|
|
* 'high' PCI IRQs filled in on demand
|
|
*/
|
|
irq_desc[i].chip = &no_irq_chip;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Overridden in paravirt.c */
|
|
void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
|
|
|
|
void __init native_init_IRQ(void)
|
|
{
|
|
int i;
|
|
|
|
/* all the set up before the call gates are initialised */
|
|
pre_intr_init_hook();
|
|
|
|
/*
|
|
* Cover the whole vector space, no vector can escape
|
|
* us. (some of these will be overridden and become
|
|
* 'special' SMP interrupts)
|
|
*/
|
|
for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
|
|
int vector = FIRST_EXTERNAL_VECTOR + i;
|
|
if (i >= NR_IRQS)
|
|
break;
|
|
if (vector != SYSCALL_VECTOR)
|
|
set_intr_gate(vector, interrupt[i]);
|
|
}
|
|
|
|
/* setup after call gates are initialised (usually add in
|
|
* the architecture specific gates)
|
|
*/
|
|
intr_init_hook();
|
|
|
|
/*
|
|
* Set the clock to HZ Hz, we already have a valid
|
|
* vector now:
|
|
*/
|
|
setup_pit_timer();
|
|
|
|
/*
|
|
* External FPU? Set up irq13 if so, for
|
|
* original braindamaged IBM FERR coupling.
|
|
*/
|
|
if (boot_cpu_data.hard_math && !cpu_has_fpu)
|
|
setup_irq(FPU_IRQ, &fpu_irq);
|
|
|
|
irq_ctx_init(smp_processor_id());
|
|
}
|