OpenCloudOS-Kernel/drivers/net/bnx2x/bnx2x_init.h

568 lines
16 KiB
C

/* bnx2x_init.h: Broadcom Everest network driver.
* Structures and macroes needed during the initialization.
*
* Copyright (c) 2007-2011 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Eliezer Tamir
* Modified by: Vladislav Zolotarov <vladz@broadcom.com>
*/
#ifndef BNX2X_INIT_H
#define BNX2X_INIT_H
/* Init operation types and structures */
enum {
OP_RD = 0x1, /* read a single register */
OP_WR, /* write a single register */
OP_SW, /* copy a string to the device */
OP_ZR, /* clear memory */
OP_ZP, /* unzip then copy with DMAE */
OP_WR_64, /* write 64 bit pattern */
OP_WB, /* copy a string using DMAE */
OP_WB_ZR, /* Clear a string using DMAE or indirect-wr */
/* Skip the following ops if all of the init modes don't match */
OP_IF_MODE_OR,
/* Skip the following ops if any of the init modes don't match */
OP_IF_MODE_AND,
OP_MAX
};
enum {
STAGE_START,
STAGE_END,
};
/* Returns the index of start or end of a specific block stage in ops array*/
#define BLOCK_OPS_IDX(block, stage, end) \
(2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end))
/* structs for the various opcodes */
struct raw_op {
u32 op:8;
u32 offset:24;
u32 raw_data;
};
struct op_read {
u32 op:8;
u32 offset:24;
u32 val;
};
struct op_write {
u32 op:8;
u32 offset:24;
u32 val;
};
struct op_arr_write {
u32 op:8;
u32 offset:24;
#ifdef __BIG_ENDIAN
u16 data_len;
u16 data_off;
#else /* __LITTLE_ENDIAN */
u16 data_off;
u16 data_len;
#endif
};
struct op_zero {
u32 op:8;
u32 offset:24;
u32 len;
};
struct op_if_mode {
u32 op:8;
u32 cmd_offset:24;
u32 mode_bit_map;
};
union init_op {
struct op_read read;
struct op_write write;
struct op_arr_write arr_wr;
struct op_zero zero;
struct raw_op raw;
struct op_if_mode if_mode;
};
/* Init Phases */
enum {
PHASE_COMMON,
PHASE_PORT0,
PHASE_PORT1,
PHASE_PF0,
PHASE_PF1,
PHASE_PF2,
PHASE_PF3,
PHASE_PF4,
PHASE_PF5,
PHASE_PF6,
PHASE_PF7,
NUM_OF_INIT_PHASES
};
/* Init Modes */
enum {
MODE_ASIC = 0x00000001,
MODE_FPGA = 0x00000002,
MODE_EMUL = 0x00000004,
MODE_E2 = 0x00000008,
MODE_E3 = 0x00000010,
MODE_PORT2 = 0x00000020,
MODE_PORT4 = 0x00000040,
MODE_SF = 0x00000080,
MODE_MF = 0x00000100,
MODE_MF_SD = 0x00000200,
MODE_MF_SI = 0x00000400,
MODE_MF_NIV = 0x00000800,
MODE_E3_A0 = 0x00001000,
MODE_E3_B0 = 0x00002000,
MODE_COS3 = 0x00004000,
MODE_COS6 = 0x00008000,
MODE_LITTLE_ENDIAN = 0x00010000,
MODE_BIG_ENDIAN = 0x00020000,
};
/* Init Blocks */
enum {
BLOCK_ATC,
BLOCK_BRB1,
BLOCK_CCM,
BLOCK_CDU,
BLOCK_CFC,
BLOCK_CSDM,
BLOCK_CSEM,
BLOCK_DBG,
BLOCK_DMAE,
BLOCK_DORQ,
BLOCK_HC,
BLOCK_IGU,
BLOCK_MISC,
BLOCK_NIG,
BLOCK_PBF,
BLOCK_PGLUE_B,
BLOCK_PRS,
BLOCK_PXP2,
BLOCK_PXP,
BLOCK_QM,
BLOCK_SRC,
BLOCK_TCM,
BLOCK_TM,
BLOCK_TSDM,
BLOCK_TSEM,
BLOCK_UCM,
BLOCK_UPB,
BLOCK_USDM,
BLOCK_USEM,
BLOCK_XCM,
BLOCK_XPB,
BLOCK_XSDM,
BLOCK_XSEM,
BLOCK_MISC_AEU,
NUM_OF_INIT_BLOCKS
};
/* QM queue numbers */
#define BNX2X_ETH_Q 0
#define BNX2X_TOE_Q 3
#define BNX2X_TOE_ACK_Q 6
#define BNX2X_ISCSI_Q 9
#define BNX2X_ISCSI_ACK_Q 11
#define BNX2X_FCOE_Q 10
/* Vnics per mode */
#define BNX2X_PORT2_MODE_NUM_VNICS 4
#define BNX2X_PORT4_MODE_NUM_VNICS 2
/* COS offset for port1 in E3 B0 4port mode */
#define BNX2X_E3B0_PORT1_COS_OFFSET 3
/* QM Register addresses */
#define BNX2X_Q_VOQ_REG_ADDR(pf_q_num)\
(QM_REG_QVOQIDX_0 + 4 * (pf_q_num))
#define BNX2X_VOQ_Q_REG_ADDR(cos, pf_q_num)\
(QM_REG_VOQQMASK_0_LSB + 4 * ((cos) * 2 + ((pf_q_num) >> 5)))
#define BNX2X_Q_CMDQ_REG_ADDR(pf_q_num)\
(QM_REG_BYTECRDCMDQ_0 + 4 * ((pf_q_num) >> 4))
/* extracts the QM queue number for the specified port and vnic */
#define BNX2X_PF_Q_NUM(q_num, port, vnic)\
((((port) << 1) | (vnic)) * 16 + (q_num))
/* Maps the specified queue to the specified COS */
static inline void bnx2x_map_q_cos(struct bnx2x *bp, u32 q_num, u32 new_cos)
{
/* find current COS mapping */
u32 curr_cos = REG_RD(bp, QM_REG_QVOQIDX_0 + q_num * 4);
/* check if queue->COS mapping has changed */
if (curr_cos != new_cos) {
u32 num_vnics = BNX2X_PORT2_MODE_NUM_VNICS;
u32 reg_addr, reg_bit_map, vnic;
/* update parameters for 4port mode */
if (INIT_MODE_FLAGS(bp) & MODE_PORT4) {
num_vnics = BNX2X_PORT4_MODE_NUM_VNICS;
if (BP_PORT(bp)) {
curr_cos += BNX2X_E3B0_PORT1_COS_OFFSET;
new_cos += BNX2X_E3B0_PORT1_COS_OFFSET;
}
}
/* change queue mapping for each VNIC */
for (vnic = 0; vnic < num_vnics; vnic++) {
u32 pf_q_num =
BNX2X_PF_Q_NUM(q_num, BP_PORT(bp), vnic);
u32 q_bit_map = 1 << (pf_q_num & 0x1f);
/* overwrite queue->VOQ mapping */
REG_WR(bp, BNX2X_Q_VOQ_REG_ADDR(pf_q_num), new_cos);
/* clear queue bit from current COS bit map */
reg_addr = BNX2X_VOQ_Q_REG_ADDR(curr_cos, pf_q_num);
reg_bit_map = REG_RD(bp, reg_addr);
REG_WR(bp, reg_addr, reg_bit_map & (~q_bit_map));
/* set queue bit in new COS bit map */
reg_addr = BNX2X_VOQ_Q_REG_ADDR(new_cos, pf_q_num);
reg_bit_map = REG_RD(bp, reg_addr);
REG_WR(bp, reg_addr, reg_bit_map | q_bit_map);
/* set/clear queue bit in command-queue bit map
(E2/E3A0 only, valid COS values are 0/1) */
if (!(INIT_MODE_FLAGS(bp) & MODE_E3_B0)) {
reg_addr = BNX2X_Q_CMDQ_REG_ADDR(pf_q_num);
reg_bit_map = REG_RD(bp, reg_addr);
q_bit_map = 1 << (2 * (pf_q_num & 0xf));
reg_bit_map = new_cos ?
(reg_bit_map | q_bit_map) :
(reg_bit_map & (~q_bit_map));
REG_WR(bp, reg_addr, reg_bit_map);
}
}
}
}
/* Configures the QM according to the specified per-traffic-type COSes */
static inline void bnx2x_dcb_config_qm(struct bnx2x *bp, enum cos_mode mode,
struct priority_cos *traffic_cos)
{
bnx2x_map_q_cos(bp, BNX2X_FCOE_Q,
traffic_cos[LLFC_TRAFFIC_TYPE_FCOE].cos);
bnx2x_map_q_cos(bp, BNX2X_ISCSI_Q,
traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos);
bnx2x_map_q_cos(bp, BNX2X_ISCSI_ACK_Q,
traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos);
if (mode != STATIC_COS) {
/* required only in backward compatible COS mode */
bnx2x_map_q_cos(bp, BNX2X_ETH_Q,
traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos);
bnx2x_map_q_cos(bp, BNX2X_TOE_Q,
traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos);
bnx2x_map_q_cos(bp, BNX2X_TOE_ACK_Q,
traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos);
}
}
/* Returns the index of start or end of a specific block stage in ops array*/
#define BLOCK_OPS_IDX(block, stage, end) \
(2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end))
#define INITOP_SET 0 /* set the HW directly */
#define INITOP_CLEAR 1 /* clear the HW directly */
#define INITOP_INIT 2 /* set the init-value array */
/****************************************************************************
* ILT management
****************************************************************************/
struct ilt_line {
dma_addr_t page_mapping;
void *page;
u32 size;
};
struct ilt_client_info {
u32 page_size;
u16 start;
u16 end;
u16 client_num;
u16 flags;
#define ILT_CLIENT_SKIP_INIT 0x1
#define ILT_CLIENT_SKIP_MEM 0x2
};
struct bnx2x_ilt {
u32 start_line;
struct ilt_line *lines;
struct ilt_client_info clients[4];
#define ILT_CLIENT_CDU 0
#define ILT_CLIENT_QM 1
#define ILT_CLIENT_SRC 2
#define ILT_CLIENT_TM 3
};
/****************************************************************************
* SRC configuration
****************************************************************************/
struct src_ent {
u8 opaque[56];
u64 next;
};
/****************************************************************************
* Parity configuration
****************************************************************************/
#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2, m3) \
{ \
block##_REG_##block##_PRTY_MASK, \
block##_REG_##block##_PRTY_STS_CLR, \
en_mask, {m1, m1h, m2, m3}, #block \
}
#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2, m3) \
{ \
block##_REG_##block##_PRTY_MASK_0, \
block##_REG_##block##_PRTY_STS_CLR_0, \
en_mask, {m1, m1h, m2, m3}, #block"_0" \
}
#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2, m3) \
{ \
block##_REG_##block##_PRTY_MASK_1, \
block##_REG_##block##_PRTY_STS_CLR_1, \
en_mask, {m1, m1h, m2, m3}, #block"_1" \
}
static const struct {
u32 mask_addr;
u32 sts_clr_addr;
u32 en_mask; /* Mask to enable parity attentions */
struct {
u32 e1; /* 57710 */
u32 e1h; /* 57711 */
u32 e2; /* 57712 */
u32 e3; /* 578xx */
} reg_mask; /* Register mask (all valid bits) */
char name[7]; /* Block's longest name is 6 characters long
* (name + suffix)
*/
} bnx2x_blocks_parity_data[] = {
/* bit 19 masked */
/* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
/* bit 5,18,20-31 */
/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
/* bit 5 */
/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */
/* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
/* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
/* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
* want to handle "system kill" flow at the moment.
*/
BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff,
0x7ffffff),
BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff),
BLOCK_PRTY_INFO_1(PXP2, 0x1ffffff, 0x7f, 0x7f, 0x7ff, 0x1ffffff),
BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0, 0),
BLOCK_PRTY_INFO(NIG, 0xffffffff, 0x3fffffff, 0xffffffff, 0, 0),
BLOCK_PRTY_INFO_0(NIG, 0xffffffff, 0, 0, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(NIG, 0xffff, 0, 0, 0xff, 0xffff),
BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1, 0x1),
BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff, 0xfff),
BLOCK_PRTY_INFO(ATC, 0x1f, 0, 0, 0x1f, 0x1f),
BLOCK_PRTY_INFO(PGLUE_B, 0x3, 0, 0, 0x3, 0x3),
BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3, 0x3),
{GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf,
{0xf, 0xf, 0xf, 0xf}, "UPB"},
{GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
{0xf, 0xf, 0xf, 0xf}, "XPB"},
BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7, 0x7),
BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f, 0x1f),
BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf, 0x3f),
BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1, 0x1),
BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf, 0xf),
BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf, 0xf),
BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff, 0xff),
BLOCK_PRTY_INFO(PBF, 0, 0, 0x3ffff, 0xfffff, 0xfffffff),
BLOCK_PRTY_INFO(TM, 0, 0, 0x7f, 0x7f, 0x7f),
BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(TCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff),
BLOCK_PRTY_INFO(CCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff),
BLOCK_PRTY_INFO(UCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff),
BLOCK_PRTY_INFO(XCM, 0, 0, 0x3fffffff, 0x3fffffff, 0x3fffffff),
BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff),
BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f, 0x3f),
BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff),
BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f, 0x1f),
BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff),
BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f, 0x1f),
BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff),
BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f, 0x3f),
};
/* [28] MCP Latched rom_parity
* [29] MCP Latched ump_rx_parity
* [30] MCP Latched ump_tx_parity
* [31] MCP Latched scpad_parity
*/
#define MISC_AEU_ENABLE_MCP_PRTY_BITS \
(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
/* Below registers control the MCP parity attention output. When
* MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
* enabled, when cleared - disabled.
*/
static const u32 mcp_attn_ctl_regs[] = {
MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
MISC_REG_AEU_ENABLE4_NIG_0,
MISC_REG_AEU_ENABLE4_PXP_0,
MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
MISC_REG_AEU_ENABLE4_NIG_1,
MISC_REG_AEU_ENABLE4_PXP_1
};
static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
{
int i;
u32 reg_val;
for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
if (enable)
reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
else
reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
}
}
static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx)
{
if (CHIP_IS_E1(bp))
return bnx2x_blocks_parity_data[idx].reg_mask.e1;
else if (CHIP_IS_E1H(bp))
return bnx2x_blocks_parity_data[idx].reg_mask.e1h;
else if (CHIP_IS_E2(bp))
return bnx2x_blocks_parity_data[idx].reg_mask.e2;
else /* CHIP_IS_E3 */
return bnx2x_blocks_parity_data[idx].reg_mask.e3;
}
static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp)
{
int i;
for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
u32 dis_mask = bnx2x_parity_reg_mask(bp, i);
if (dis_mask) {
REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
dis_mask);
DP(NETIF_MSG_HW, "Setting parity mask "
"for %s to\t\t0x%x\n",
bnx2x_blocks_parity_data[i].name, dis_mask);
}
}
/* Disable MCP parity attentions */
bnx2x_set_mcp_parity(bp, false);
}
/**
* Clear the parity error status registers.
*/
static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp)
{
int i;
u32 reg_val, mcp_aeu_bits =
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
/* Clear SEM_FAST parities */
REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
if (reg_mask) {
reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i].
sts_clr_addr);
if (reg_val & reg_mask)
DP(NETIF_MSG_HW,
"Parity errors in %s: 0x%x\n",
bnx2x_blocks_parity_data[i].name,
reg_val & reg_mask);
}
}
/* Check if there were parity attentions in MCP */
reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP);
if (reg_val & mcp_aeu_bits)
DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n",
reg_val & mcp_aeu_bits);
/* Clear parity attentions in MCP:
* [7] clears Latched rom_parity
* [8] clears Latched ump_rx_parity
* [9] clears Latched ump_tx_parity
* [10] clears Latched scpad_parity (both ports)
*/
REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
}
static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp)
{
int i;
for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
if (reg_mask)
REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
bnx2x_blocks_parity_data[i].en_mask & reg_mask);
}
/* Enable MCP parity attentions */
bnx2x_set_mcp_parity(bp, true);
}
#endif /* BNX2X_INIT_H */